In the present work, a series of 1-benzyl-2-alkylbenzenes functionalized was subjected to intramolecular cyclization reaction promoted by iron(III) chloride with diorganyl dichalcogenide allowed the synthesis of 9-(organochalcogen)-5H-benzo[7]annulenes whereas the mutual action between diorganyl dichalcogenide and iron(III) chloride in a 0.5:1.0 mole ratio was essential in order to achieve the maximal yields of the products. The cyclization reaction tolerated a variety of functional groups, such as trifluoromethyl, chloro, fluorine and methoxyl, in both 1-benzyl-2-alkynylbenzenes and diorganyl diselenides, giving the seven-membered carbocyclic exclusively via a 7-endo-dig cyclization process, it resulted in a total of 23 samples in 45-77 % yield. / No presente trabalho, uma série de 1-benzil-2-alquilbenzenos funcionalizados foi submetida à reação de ciclização intramolecular promovida por FeCl3 com dicalcogeneto de diorganoíla, permitindo a síntese de 9-(organocalcogênio)-5H-benzo[7]anulenos. Considerou-se que uma ação mútua entre o dicalcogeneto de diorganoíla e o cloreto de ferro (III), de proporções molares 0,5:1,0, é essencial para os produtos atingirem bons rendimentos. A reação de ciclização tolera uma variedade de grupos funcionais tais como trifluormetil, cloro, flúor e metoxila , em ambos os 1-benzil-2-alquilbenzenos e dicalcogeneto de diorganoíla, levando aos carbociclos de sete membros, exclusivamente por meio de um processo de ciclização 7-endo-dig, resultou-se em um total de 23 exemplos com 45 - 77% de rendimento.

Since the scotch-tape isolation of graphene, two-dimensional (2D) materials have been studied with increasing enthusiasm. Two-dimensional transition-metal dichalcogenides are of particular interest as atomically thin semiconductors. These materials are naturally transparent in their few-layer form, have direct band gaps in their monolayer form, exhibit extraordinary absorption, and demonstrate unique physics, making them promising for efficient and novel optical devices. Due to the two-dimensional nature of the materials, their properties are highly susceptible to the environment above and below the 2D films. It is critical to understand the influences of this environment on the properties of 2D materials and on the performance parameters of devices made with the materials. For transparent optical devices requiring electrical contacts and gates, the effect of transparent conducting oxides on the optical properties of 2D semiconductors is of particular importance. The ability to tune the optical properties of 2D transition-metal dichalcogenides could allow for improved control of the emission or absorption wavelength of optical devices made with the materials. Continuously tuning the optical properties of these materials would be advantageous for variable wavelength devices such as photodetectors or light emitters. This thesis systematically investigates the intrinsic structural and optical properties of two-dimensional transition-metal dichalcogenide films, the effect of substrate-based optical interference on the optical emission properties of the materials, and demonstrates methods to controllably tune the luminescence emission of the materials for future optical applications. This thesis advances the study of these materials toward integration in future efficient and novel optical devices. The specific transition metal dichalcogenides investigated here are molybdenum disulfide (MoS2), molybdenum diselenide (MoSe2), tungsten disulfide (WS2), and tungsten diselenide (WSe2). The thickness-dependence of the intrinsic in-plane crystal structure of these materials is elucidated with high-resolution transmission electron microscopy; thickness-dependent optical properties are studied using Raman and photoluminescence spectroscopies. This thesis investigates the optical interference effects from substrates with transparent conducting oxide layers on the optical properties of few-layer MoS2 films. An understanding of these effects is critical for integrating MoS2 into efficient optical devices. We predict contributions of optical interference effects to the luminescence emission of few-layer MoS2 films. The predictions are experimentally verified. We also demonstrate the use of optical interference effects to tune the wavelength and intensity of the luminescence emission of few-layer MoS2. This thesis explores the use of electric fields applied perpendicular to the films to continuously and reversibly tune the band gap of few-layer MoS2 for future variable wavelength devices. To facilitate integration into devices, we demonstrate electric fieldinduced band gap tuning by applying electric fields with a pair of transparent or semitransparent conducting layers, and without the need for direct electrical contact to the MoS2 films. The observed band gap tuning is attributed to the Stark Effect. We discuss challenges to maximizing the effect of electric field-induced band gap tuning. We demonstrate that optical interference effects do not prevent observation of band gap tuning via applied electric fields. We successfully combine two luminescence emission tuning methods: optical interference effects and electric field effects.

abstract: A highly uniform and repeatable method for synthesizing the single-layer transition metal dichalcogenides (TMDs) molybdenum disulfide, MoS2, and tungsten disulfide, WS2, was developed. This method employed chemical vapor deposition (CVD) of precursors in a custom built cold-wall reaction chamber designed to allow independent control over the growth parameters. Iterations of this reaction chamber were employed to overcome limitations to the growth method. First, molybdenum trioxide, MoO3, and S were co-evaporated from alumina coated W baskets to grow MoS2 on SiO2/Si substrates. Using this method, films were found to have repeatable coverage, but unrepeatable morphology. Second, the reaction chamber was modified to include a pair of custom bubbler delivery systems to transport diethyl sulfide (DES) and molybdenum hexacarbonyl (MHC) to the substrate as a S and Mo precursors. Third, tungsten hexacarbonyl (WHC) replaced MHC as a transition metal precursor for the synthesis of WS2 on Al2O3, substrates. This method proved repeatable in both coverage and morphology allowing the investigation of the effect of varying the flow of Ar, varying the substrate temperature and varying the flux of DES to the sample. Increasing each of these parameters was found to decrease the nucleation density on the sample and, with the exception of the Ar flow, induce multi-layer feature growth. This combination of precursors was also used to investigate the reported improvement in feature morphology when NaCl is placed upstream of the substrate. This was found to have no effect on experiments in the configurations used. A final effort was made to adequately increase the feature size by switching from DES to hydrogen sulfide, H2S, as a source of S. Using H2S and WHC to grow WS2 films on Al2O3, it was found that increasing the substrate temperature and increasing the H2S flow both decrease nucleation density. Increasing the H2S flow induced bi-layer growth. Ripening of synthesized WS2 crystals was demonstrated to occur when the sample was annealed, post-growth, in an Ar, H2, and H2S flow. Finally, it was verified that the final H2S and WHC growth method yielded repeatability and uniformity matching, or improving upon, the other methods and precursors investigated. / Dissertation/Thesis / Doctoral Dissertation Physics 2019

No description available.

京都大学 / 新制・課程博士 / 博士(エネルギー科学) / 甲第24116号 / エネ博第449号 / 新制||エネ||84(附属図書館) / 京都大学大学院エネルギー科学研究科エネルギー応用科学専攻 / (主査)教授 大垣 英明, 教授 松田 一成, 教授 宮内 雄平 / 学位規則第4条第1項該当 / Doctor of Energy Science / Kyoto University / DFAM

In this thesis, we present a detailed investigation of the electronic properties of particular transition-metal dichalcogenides. Applying electron-energy loss spectroscopy, the connection between the negative plasmon dispersion of tantalum diselenide and the occurrence of a charge-density wave state (CDW) in this compound as well as related materials is observed. Our studies include doping experiments with alkali metal addition altering the charge density of the compounds. This is known to suppress the CDW. We show that it further changes the plasmon dispersion from negative to positive slope. To estimate the doping rate of the investigated tantalum diselenide samples, a density functional theory approach is introduced, giving reliable results for a quantitative analysis of our findings. We refer to a theoretical model to describe the connection of the charge ordering and the plasmon dynamics. Investigations of the non-CDW compound niobium disulfide give further insights into the proposed interaction. Experimental results are further evaluated by a Kramers-Kronig-analysis. A structural analysis, by means of elastic electron scattering, shows the CDW to be suppressed upon doping, giving space for an emerging superstructure related to the introduced K atoms. / In der vorliegenden Arbeit wird eine detaillierte Untersuchung der elektronischen Eigenschaften von ausgewählten Übergangsmetall-Dichalcogeniden präsentiert. Unter Anwendung von Elektronenenergieverlust-Spektroskopie wird die Verbindung der negativen Plasmomendispersion in Tantaldiselenid zum Auftreten eines Ladungsdichtewelle-Zustands (CDW) in diesem und in verwandten Materialien untersucht. Die Untersuchungen schließen Dotierungsexperimente mit dem Zusatz von Alkalimetallen ein, die die Ladungsdichte der Proben beeinflussen. Einerseits unterdrückt dies die CDW. Es wird außerdem gezeigt, dass sich der Anstieg der Plasmonendispersion von negativ zu positiv ändert. Ein Dichtefunktional-Theorie-Zugang zur Abschätzung der Dotierungsraten der untersuchten Tantaldiselenid-Proben wird genutzt, um verlässliche Ergebnisse für die quantitative Analyse unserer Messungen zu erhalten. Ein theoretisches Modell wird einbezogen, welches die Verbindung der Ladungsordung zur kollektiven Anregung der Ladungsdichte beschreibt, Untersuchungen der nicht-CDW Substanz Niobdisulfid geben weitere Einblicke in die Verbindung der beiden Phänomene. Die experimentellen Resultate werden weiterhin mit einer Kramers-Kronig-Analyse ausgewertet. Strukturelle Untersuchungen mit elastischer Elektronenstreuung zeigen, wie die CDW unterdrückt wird und einer auftauchenden Überstruktur, verursacht von den interkalierten K-Atomen, Raum gibt.

For sustainable development, it is highly important to limit the loss of energy and materials in machines used for transportation, manufacturing, and other purposes. Large improvements can be achieved by reducing friction and wear in machine elements, for example by the application of coatings. This work is focused on triboactive coatings, for which the outermost layer changes in tribological contacts to form so-called tribofilms. The coatings are deposited by magnetron sputtering (a physical vapor deposition method) and thoroughly chemically and structurally characterized, often theoretically modelled, and tribologically evaluated, to study the connection between the composition, structure and tribological performance of the coatings. Tungsten disulfide, WS2, is a layered material with the possibility of ultra-low friction. This work presents a number of nanocomposite or amorphous coatings based on WS2, which combine the low friction with improved mechanical properties. Addition of N can give amorphous coatings consisting of a network of W, S and N with N2 molecules in nanometer-sized pockets, or lead to the formation of a metastable cubic tungsten nitride. Co-deposition with C can also give amorphous coatings, or nanocomposites with WSx grains in an amorphous C-based matrix. Further increase in coating hardness is achieved by adding both C and Ti, forming titanium carbide. All the WS2-based materials can provide very low friction (down to µ<0.02) by the formation of WS2 tribofilms, but the performance is dependent on the atmosphere as O2 and H2O can be detrimental to the tribofilm functionality. Another possibility is to form low-friction tribofilms by tribochemical reactions between the two surfaces in contact. Addition of S to TiC/a-C nanocomposite coatings leads to the formation of a metastable S-doped carbide phase, TiCxSy, from which S can be released. This enables the formation of low-friction WS2 tribofilms when a Ti-C-S coating is run against a W counter-surface. Reduced friction, at a moderate level, also occurs for steel counter-surfaces, likely due to formation of beneficial iron sulfide tribofilms. The studied coatings, whether based on WS2 or TiC, are thus triboactive, with the ability to form low-friction tribofilms in a sliding contact.

It was the purpose of this thesis to evaluate two-dimensional (2D) magneto-thermoelectric (MTE) phenomena in thinner regime. Mostly this work was motivated by the recent discovery of MTE properties in transition metal dichalcogenides (TMD). In general, TMD thin films have attracted much attention due to their very good electrical, optical, and electrochemical properties. However the total amount of studies of the MTE in TMD is rather small compared to the other properties, such as electric, opto-electric, and catalyst. Hence, in this thesis, we aimed to evaluate the MTE properties in TMD materials. Before we started to measure TMDs, we established a measurement platform and studied MTE properties in ferromagnetic CoFeB, and Weyl semimetal Co2MnGa.:1. Introduction a. Physical background i. Seebeck Effect ii. Anomalous Hall Effect and Anomalous Nernst Effect iii. Mott relation 2. Sample Preparation and evaluation a. Physical vapor deposition b. Mechanical Exfoliation c. Patterning Process 3. Data Evaluation 4. State of the art in Transition Metal Dichalcogenids a. Introduction b. TMD in use c. Magneto-thermoelectric properties in TMD 5. Magneto-thermoelectrical properties in CoFeB thin film a. Introduction b. Results and Discussion c. Conclusion 6. Anomalous Nernst and Anomalous Hall effect in Co2MnGa thin film a. Introduction b. Results and Discussion c. Summary 7. Anomalous Hall effect in exfoliated VS2 flake a. Introduction b. Experiment c. Results and Discussion d. Summary 8. Summary Acknowledgement and References

No description available.

In this thesis, we present a detailed investigation of the electronic properties of particular transition-metal dichalcogenides. Applying electron-energy loss spectroscopy, the connection between the negative plasmon dispersion of tantalum diselenide and the occurrence of a charge-density wave state (CDW) in this compound as well as related materials is observed. Our studies include doping experiments with alkali metal addition altering the charge density of the compounds. This is known to suppress the CDW. We show that it further changes the plasmon dispersion from negative to positive slope. To estimate the doping rate of the investigated tantalum diselenide samples, a density functional theory approach is introduced, giving reliable results for a quantitative analysis of our findings. We refer to a theoretical model to describe the connection of the charge ordering and the plasmon dynamics. Investigations of the non-CDW compound niobium disulfide give further insights into the proposed interaction. Experimental results are further evaluated by a Kramers-Kronig-analysis. A structural analysis, by means of elastic electron scattering, shows the CDW to be suppressed upon doping, giving space for an emerging superstructure related to the introduced K atoms. / In der vorliegenden Arbeit wird eine detaillierte Untersuchung der elektronischen Eigenschaften von ausgewählten Übergangsmetall-Dichalcogeniden präsentiert. Unter Anwendung von Elektronenenergieverlust-Spektroskopie wird die Verbindung der negativen Plasmomendispersion in Tantaldiselenid zum Auftreten eines Ladungsdichtewelle-Zustands (CDW) in diesem und in verwandten Materialien untersucht. Die Untersuchungen schließen Dotierungsexperimente mit dem Zusatz von Alkalimetallen ein, die die Ladungsdichte der Proben beeinflussen. Einerseits unterdrückt dies die CDW. Es wird außerdem gezeigt, dass sich der Anstieg der Plasmonendispersion von negativ zu positiv ändert. Ein Dichtefunktional-Theorie-Zugang zur Abschätzung der Dotierungsraten der untersuchten Tantaldiselenid-Proben wird genutzt, um verlässliche Ergebnisse für die quantitative Analyse unserer Messungen zu erhalten. Ein theoretisches Modell wird einbezogen, welches die Verbindung der Ladungsordung zur kollektiven Anregung der Ladungsdichte beschreibt, Untersuchungen der nicht-CDW Substanz Niobdisulfid geben weitere Einblicke in die Verbindung der beiden Phänomene. Die experimentellen Resultate werden weiterhin mit einer Kramers-Kronig-Analyse ausgewertet. Strukturelle Untersuchungen mit elastischer Elektronenstreuung zeigen, wie die CDW unterdrückt wird und einer auftauchenden Überstruktur, verursacht von den interkalierten K-Atomen, Raum gibt.