none

This PhD thesis presents a study of structure-composition correlations of bioactive glasses (BGs) by employing solid-state Nuclear Magnetic Resonance (NMR) spectroscopy. Silicate-based Na2O−CaO−SiO2−P2O5 BGs are utilized clinically and are extensively investigated for bone regeneration purposes. Once implanted in the human body, they facilitate bone regeneration by partially dissolving in the body fluids, followed by the formation of a biomimetic surface-layer of calcium hydroxy-carbonate apatite (HCA). Eventually, the implanted BG totally integrates with the bone. The bioactivity of melt-prepared BGs depends on their composition and structure, primarily on the phosphorus content and the average silicate-network connectivity (NC). We explored these composition-structure relationships for a set of BGs for which the NC and phosphorus contents were varied independently. The short-range structural features of the glasses were explored using 29Si and 31P magic-angle-spinning (MAS) NMR spectroscopy. 31P MAS NMR revealed that the orthophosphate content is directly proportional to the total P content of the glass, with a linear correlation observed between the orthophosphate content and the silicate network connectivity. The bearings of the results for future BG design are discussed. By using multiple-quantum coherence-based 31P NMR experiments, the spatial distribution of orthophosphate groups was probed in the melt prepared BGs, as well as in two mesoporous bioactive glasses prepared by an evaporation-induced self-assembly technique. The results evidence randomly distributed orthophosphate groups in the melt-prepared BGs, whereas the pore-walls of the mesoporous bioactive glasses constitute nanometer-sized clusters of calcium phosphate. The distribution of Na+ ions among the phosphate/silicate groups were studied by heteronuclear dipolar-based 23Na−31P NMR experiments, verifying that sodium is dispersed nearly randomly in the glasses. The phosphorus and proton environments in biomimetically grown HCA were investigated by using 1H and 31P MAS NMR experiments. Our studies revealed that the biomimetic HCA shared many local structural features with synthetic and well-ordered hydroxy-apatite. / <p>At the time of the doctoral defense, the following paper was unpublished and had a status as follows: Paper 4: Accepted.</p>

Organic-inorganic nanostructured composites are nowadays integrated in the field of material science and technology. They are used as advanced materials directly or as precursors to novel composites with potential applications in optics, mechanics, energy, catalysis and medicine. Many properties of these complex materials depend on conformational rearrangements in their inherently dynamic organic parts. The focus of this thesis is on the study of the molecular mobility in ordered nanostructured composites and lyotropic mesophases and also on the development of relevant solid-state NMR methodologies. In this work, a number of new experimental approaches were proposed for dipolar NMR spectroscopy for characterizing molecular dynamics with atomic-level resolution in complex solids and liquids. A new acquisition scheme for two-dimensional dipolar spectroscopy has been developed in order to expand the spectral window in the indirect dimension while using limited radio-frequency power. Selective decoupling of spin-1 nuclei for sign-sensitive determination of the heteronuclear dipolar coupling has been described. A new dipolar recoupling technique for rotating samples has been developed to achieve high dipolar resolution in a wide range of dipolar coupling strength. The experimental techniques developed herein are capable of delivering detailed model-independent information on molecular motional parameters that can be directly compared in different composites and their bulk analogs. Solid-state NMR has been applied to study the local molecular dynamics of surfactant molecules in nanostructured organic-inorganic composites of different morphologies. On the basis of the experimental profiles of local order parameters, physical motional models for the confined surfactant molecules were put forward. In layered materials, a number of motional modes of surfactant molecules were observed depending on sample composition. These modes ranged from essentially immobilized rigid states to highly flexible and anisotropically tumbling states. In ordered hexagonal silica, highly dynamic conformationally disordered chains with restricted motion of the segments close to the head group have been found. The results presented in this thesis provide a step towards the comprehensive characterization of the molecular states and understanding the great variability of the molecular assemblies in advanced nanostructured organic−inorganic composite materials. / <p>QC 20150225</p>

No description available.

La mesure de couplage dipolaire permet d’accéder à la structure tridimensionnelle d’un composé solide. Cependant, en présence d’une forte densité de spins couplés, le phénomène de troncature dipolaire rend difficile l’obtention de ces informations par RMN du solide. Ce problème peut être affranchi par l’étude de spins rares en abondance naturelle. En effet, avec une abondance naturelle de 1.1 %, la probabilité que trois 13C soient couplés, et avec elle la troncature dipolaire, devient négligeable. Une méthodologie basée sur la séquence de recouplage dipolaire POST-C7 permet d’accéder à des informations structurales d’échantillons en abondance naturelle sensibles à la fois à la conformation moléculaire et à l’empilement cristallin par mesure de couplages dipolaires 13C-13C. La sensibilité de détection des signaux RMN 13C est augmentée à l’aide la polarisation dynamique nucléaire ce qui permet de réduire considérablement les temps d’expériences. De plus, la séquence de recouplage R20_9_2 aidée de supercycles s’est montrée être plus robustes que POST-C7 face à de fortes anisotropies de déplacement chimique ou de forts couplages hétéronucléaires 1H-13C. La seconde problématique abordée concerne l’attribution de signaux 13C. En effet, il existe seulement quelques exemples de détermination de connectivités 13C -13C en abondance naturelle. Nous montrons ici que des spectres de corrélations dipolaires 13C-13C peuvent être obtenus en quelques jours à l’aide de la séquence de recouplage R20_9_2. Contrairement aux méthodologies basées sur le couplage J, notre séquence requiert un temps d’excitation DQ plus court ce qui la rend adaptée à l’étude de solides désordonnés. / Measurment of dipolar coupling provides 3D structural information of powder samples. However, in practice, the high density of spins in organic compounds prevents the measurements of long-range dipolar couplings in solid-state NMR by the so-called dipolar truncation effect. The study of rare spins on natural abundance allows to overcome this problem. In fact, with a natural abundance of 1.1 %, the probability for three 13C to be coupled is negligible. We developed a methodology based either on the dipolar recoupling NMR pulse sequence POST-C7 or on the dramatic increase in sensitivity provided by dynamic nuclear polarization. We demonstrated that its methodology provides a measure of 13C-13C dipolar couplings in natural abundance powder samples and that the so-obtained distance information is sensitive to both molecular conformation and crystal packing of powder samples. Moreover, we show that the recoupling pulse sequence R20_9_2 is more robust to strong chemical shift anisotropy and also to strong 1H-13C heteronuclear dipolar couplings than POST-C7. The second challenge involves 13C signal assignment for natural abundance. In fact, there are only a few examples of 13C-13C correlation spectra obtained for natural abundance samples. Here, we show that 13C-13C correlation spectra sequence based on the reintroduction of 13C−13C dipolar couplings can be obtained with standard MAS probe and within few days using R20_9_2 pulse sequence. Contrary to pulse sequences based on 13C-13C J coupling, our pulse sequence requires shorter DQ excitation time and hence, is more suitable for samples having short T2 relaxation times such as amorphous solids.