Diploma thesis deals with a design of the retirement home for seniors in the town of Bučovice. The house is a three-storey building with a rectangular floor plan partly situated in the slope. In the middle of the building, there is an atrium reaching to the second floor. The construction is covered by a flat green roof. The building is designed for the permanent residence of 28 seniors, with their rooms including sanitary facilities located on the two upper floors. The operational and technical facility for both the residents and personnel, including canteen with kitchen and doctor's practice, is located on the ground floor of the house. The construction system of the building is designed as a combination of monolithic concrete and masonry. The whole house is designed as accessible.

The diploma thesis deals with the solution of the end house building. The guesthouse is designed with a restaurant with a café and a kitchen on the ground floor. On the upper floors there are guest rooms, including a barrier-free room, a two-room apartment for families with children, a meeting room for corporate meetings and terraces for a more comfortable stay in the guesthouse. The building is a three-storey and a partial basement. Roofing will be done with a sloping roof on one side with a hump and on the other with a shield. The building has an atypical floor plan that copies the shape of a building plot. The project is processed using AutoCad Architecture.

This Master's thesis deals with the design of a new workplace and the optimization of the process of printing production documentation for given production sections at IMI International Ltd. The solution to the problem begins with an analysis of the process that pointed to certain types of waste. Then, the process was optimized and a more efficient workplace with ergonomic features was designed. In the last part of the thesis the proposal is technically and economically evaluated.

This master‘s thesis deals with the solution of the production of the given part "APZ13". The structural analysis of the component is followed by the choice of the available manufacturing technology. The following is a theoretical description of the chosen technology and injection mold. Its solution is practically described in the following chapter and then the creation of TPV documentation of the whole project. The conclusion of this master’s thesis is a technical-economic evaluation of the chosen technology and discussion.

The diploma thesis deals with the design of a new building of a senior house in the village Sazovice. The new building is situated on flat terrain in the center of the village. The building has three floors and one underground. The purpose is to build a building for seniors' stay. Part of the building consists of technical, operational and storage premises. The remaining space is used for housing. There are two main entrances to the building from the west side, where a car park and an access road is. The roofing is designed with a single-layer flat roof loaded with gravel. Part of the roof construction is designed as a vegetation with a terrace.

The diploma thesis deals with issues related to the award of public contracts in the field of architecture and design. Due to the scope of the topic, the view is focused on the analysis of public procurement in the field. The diploma thesis describes the types of public contracts and tenders, applicable legislation, control authority in the Czech Republic and design and architectural work.

This thesis describes the hospital information system (HIS) CLINICOM, focusing on the department of radiology. It analyses the problems linked with Internet transport of patient image documentation and it provides instructions how to create remote access interface on the department of radiology. It gives also a detailed guide describing installation and components configuration of HIS CLINICOM.

The diploma thesis focuses on company management systems, which could be set up by specified standards. The thesis specifies document administration system of integrated company management system. The thesis includes theoretical findings and practical instructions on how to create effective company document management system.

The proposed fire station (type JPO II/1) is situated in village Měřín in gently prone terrain. It is brick, non-basement, two-floor structure in operational part. Building contains two rectangles with dimensions – 24,9x17,0 metres in operational part, 18,45x16,1 metres in technical part. The fire station is based on plain concrete foundations and roofed is designed on a single casing roof.

This master's thesis is focused on the design of an apartment building and on the preparation of its project documentation. The house is located on a plot number 2162/122 in the cadastral area Město Albrechtice (693,391) on the P. Novák Street. House has a rectangularly shaped ground plan with the dimensions 28.34 x 13.84 m. It is a three storey building with two aboveground floors and an attic. On the first floor there is a vestibule, an elevator, a staircase, a bike room, one three-room apartment (with a built-in kitchen) and two two-room apartments (with a built-in kitchen). The second floor offers a staircase, an elevator, two three-room apartments and one two-room apartment (with a built-in kitchen). The attic consists of a staircase, an elevator, a utility room, a drying room and two four-room apartments (with a built-in kitchen). The foundations of the house are from concrete strips. Vertical and horizontal structure consist of the cement-chips shuttering system (Velox). The roof of the house is gabled with a slope of 8° and 11° plotted gang-nail trusses.