No description available.

No description available.

This master’s thesis deals with the design of equipment for testing differentials. The aim of the thesis is therefore the design of a special device that will be able to measure the steady and transient characteristics of differentials. Master’s thesis is divided into four chapters. The first chapter points out the disadvantages of fully open and closed differentials, the second deals with a basic overview of the structures and design of self-locking differentials. The third chapter deals with research of existing devices that test and measure the characteristics of differentials. The fourth chapter then discusses the possible drives of the tested unit. The fifth chapter focuses on the actual construction design of the test equipment. The subsequent sixth chapter then solves the strength calculations of the chosen structural elements of this device.

No description available.

Brass musicians are known to experience a performance problem that is sometimes called valsalva maneuver or musical stuttering. This problem is known to cause difficulty starting a first note, tension in the throat, and tightness in the chest. Unfortunately, the research literature lacks sufficient details for evidence-based interventions. Therefore, the purpose of this study is to characterize and define this performance problem as experienced by brass musicians. An online epidemiologic survey was developed and deployed to collect data from brass musicians who have experienced this problem in their own playing. The survey was designed to acquire data in order to characterize and define the phenomenon through a biopsychosocial framework. The survey was also designed to assess whether this problem aligns with Altenmuller's heuristic model of motor control disruptions. A diverse group of brass musicians (n = 252) participated and offered relevant details for characterizing and defining this problem. Analysis of characteristic data suggests this problem is not a form of musical stuttering. Considering these data through Altenmuller's model suggests that this problem is experienced as a spectrum of motor disruptions that can develop into a unique type of musician's dystonia. While additional research is warranted, the results of this study are applicable to brass musicians, brass pedagogues, music educators, and performing arts health clinicians.

This study is presented in nine chapters as follows: Chapter one reviews the reported literature on the NMR of natural diamond. The NMR signal of diamond consists on a single line at 39 ppm from TMS and two hyperfine lines due to 13C interactions. The reported relaxation times, measured in natural diamond, synthetic diamonds and 13C enriched diamonds, are discussed. The second chapter introduces the apparatus used, which included a Bruker Avance NMR spectrometer, a Bruker ESP380E pulsed EPR spectrometer and a high powersband DNP system. The availability of this excellently equiped laboratory presented a unique opportunity to perform this investigation. Chapter three outlines the experimental techniques used as well as the manner in which the acquired data was processed. The fourth chapter presents an overview of the most common defects found in diamond. Proposed models of these defects are presented and the resulting EPR spectra displayed. The methods developed to determine the paramagnetic impurity concentration from the EPR line width and the spin-spin relaxation times are presented in the fifth chapter. The line width gives the total paramagnetic impurity concentration to about 10 ppm. The spin-spin relaxation time allows the determination of Pl and P2 paramagnetic impurity concentrations individually, to much lower levels from measurements on the central and hyperfine lines. This information was used in the explanation of the relaxation behaviour for the various diamonds investigated. The temperature dependence of the paramagnetic electron relaxation times is reported in the sixth chapter. The results obtained are consistent with the findings in prior work that Pl impurities are typical Jahn Teller centres. Two diamonds, however, display trends that depart from this theory. These diamonds contain N3 defect centres, which appear to be responsible for this behaviour. It was found in these experiments that, bar thermal expansion effects, the spin-spin relaxation time is essentially independent of temperature. The seventh chapter deals with the solid state and thermal mixing effects. The relevant theory, results obtained and a discussion of these results, are presented. The effect of impurity concentration, defect types, microwave power, the exposure time and the offset from resonance on the polarisation rates and the 13C polarisation are investigated in depth. Finally the effect of applying the DNP treatment on the central and hyperfine lines is discussed. The pulsed DNP process is presented in the eighth chapter. The relevant theory, the effects of matching of the Hartmann-Hahn condition, impurity concentrations and types, on the polarisation rate and signal enhancement of JJC nuclei is given. A comparison to the continuous wave techniques is then made. The ninth chapter summarises the achievements and recommendations for further work. / Physics / D. Phil. (Physics)

在現行所得稅制度下，由於課稅期間的規定，會計基礎的選擇篤累進稅率的採行，使 所得經常變動者負擔較多的租稅，而產生不公平的現象。此種不公平的現象導致人們 將所得費用在各期間們意移轉，以逃避過重的稅負，因而形成經濟效率的損失，所得 變動的集遽效果（BUNCHING EFFECT ），使資產的所得者不願變動其資產的持有，進 而形成緊銷效果（LOCKING-IN EFFECT ），減少資產的流動性，擾亂了資本市場的秩 序；另一方面，為了避免納稅者將所得及費用在期間們意移轉，若以法規加以限制， 不但交果不彰，反而增加了稅制複雜性，而使整個經濟體制的運作缺乏效率。因此多 婁字者均主張以所得平均法解決上重問題。 本文共分六章，第一章為導論：對所得變湩之課稅問題加以扼要說明；第二章對所得 變動發生課稅問題的原由及其影響作一番探討；第三章對所得變動之課稅問題提出一 些解決的方法，即所得平均法的介紹；第四章為美國平均法之歷史回顧，並對其引申 模型加以評介；第五章對我國所得變動之處理詳加評述，並對所得平均法在我國實施 之可三性作一綜合性論述；第六章為結論與建議。

This PhD thesis focuses on the study of mode locked laser diodes based on novel optimized InAs Quantum Dash structures grown on InP substrates. It covers several important modelling aspects, the clean room processing of single and two section shallow ridge waveguide lasers, characterization of the fabricated devices and the evaluation of their performance in different application scenarios. Systematic characterization experiments and subsequent analyses have allowed to gain a much deeper comprehension of the physical mechanisms related to the mode locking regime in these devices, thus far not completely understood. This has allowed to better control most of the main physical phenomena limiting device performance, resulting in first demonstrations of record peak power, sub-picosecond pulse, low radio frequency linewidth and high repetition frequency mode locked lasers grown on InP substrates, opening the way to a vast number of potential applications in the 1.55 µm telecommunication window

In der vorliegenden Arbeit wird ein gemischtes Element gegen Locking-Effekte untersucht. Dazu wird ein Fünf-Feld-Hu-Washizu-Funktional (CoFEM-Element) für lineare und quadratische Hexaeder-Elemente unter einer hyperelastischen, isotropen, polykonvexen sowie einer transversal-isotropen Materialformulierung implementiert. Die resultierenden nichtlinearen Gleichungen werden mithilfe eines Mehrebenen-NEWTON-RAPHSON-Verfahren unter Beachtung einer konsistenten Linearisierung gelöst. Als repräsentatives Beispiel der numerischen Untersuchungen dient der einseitig eingespannte Cook-Balken mit einer quadratischen Druckverteilung am Rand. Zur Beurteilung des CoFEM-Elements wird das räumliche Konvergenzverhalten für unterschiedliche Polynomgrade und für verschiedene Netze unter Beachtung der algorithmischen Effizienz untersucht. / This paper presents a mixed finite element formulation of Hu-Washizu type (CoFEM) designed to reduce locking effects with respect to a linear and quadratic approximation in space. We consider a hyperelastic, isotropic, polyconvex material formulation as well as transverse isotropy. The resulting nonlinear algebraic equations are solved with a multilevel NEWTON-RAPHSON method. As a numerical example serves a cook-like cantilever beam with a quadratic distribution of in-plane load on the Neumann boundary. We analyze the spatial convergence with respect to the polynomial degree of the underlying Lagrange polynomials and with respect to the level of mesh refinement in terms of algorithmic efficiency.

Des applications comme les contre-mesures optiques nécessitent des sources puissantes et avec une bonne qualité de faisceau dans le moyen infrarouge. Le laser à cascade quantique (LCQ) est une solution prometteuse mais la puissance fournie par ces lasers n’est pas suffisante. La combinaison cohérente de plusieurs de ces sources devrait permettre de sommer leurs puissances tout en conservant la qualité de faisceau d’un émetteur unique et constitue donc une solution intéressante pour contourner l’actuelle limitation en puissance des LCQ.Nous présentons une étude théorique et expérimentale de la combinaison de faisceaux cohérente de LCQ dans une cavité externe commune utilisant un coupleur de faisceaux. La mise en phase est ici totalement passive puisque fondée sur la minimisation des pertes dans la cavité globale : on parle d’auto-organisation. Un modèle général permettant de quantifier l’efficacité de combinaison et la stabilité de telles cavités est développé. Dans un premier temps, on montre expérimentalement que la combinaison cohérente de deux LCQ dans une cavité Michelson est une solution efficace et stable. Pour combiner plus d’émetteurs il est nécessaire de concevoir des coupleurs de faisceaux dans le moyen infrarouge efficaces. Pour cela, nous avons étudié deux types de réseaux : les réseaux de phase binaire (réseaux de Dammann) et des structures à gradient d’indice composées de motifs sub-longueur d’onde. Le dessin et l’optimisation de telles structures fait appel à la théorie des milieux artificiels et nécessite l’utilisation d’un code de résolution rigoureuse des équations de Maxwell (RCWA). Enfin, la combinaison cohérente de cinq LCQ en cavité externe avec un coupleur de faisceaux est démontrée expérimentalement et la combinaison d’un plus grand nombre de LCQ est discutée. En conclusion, nous présentons une solution originale pour réaliser la combinaison cohérente passive de LCQ et ainsi apporter une solution à l’augmentation de puissance dans le moyen infrarouge. / Powerful sources in the mid-infrared with a good beam quality are highly needed for applications such as optical countermeasures. The quantum cascade laser (QCL) is a promising solution but the maximum power achievable is not sufficient. The coherent beam combining of several QCL could lead to higher output power in the same beam and thus is an interesting solution to circumvent the current power limitation of these sources.We present a theoretical and experimental study of the coherent beam combining of QCL in a common external cavity with a beam combiner. The phase locking is totally passive since it is only based on loss minimization in the external cavity: it is a self-organization process. A general model is developed to quantify the combining efficiency and the stability that can be obtained from this method. Experimentally, the coherent combining of two QCL in a Michelson cavity is studied first and demonstrated to be efficient and stable. In order to combine more emitters, an efficient beam combiner must be designed in the mid-infrared. For that purpose, two type of gratings, a classical binary phase grating (or Dammann grating) and a more complex gradient-index structure made of local sub-wavelength patterns are designed and compared. The calculation and optimization of this sub-wavelength structure is based on the artificial media theory and is achieved with rigorous coupled wave analysis (RCWA). Finally, the coherent combining of five QCL in an external cavity with a binary phase grating is demonstrated and the scalability to the combining of more emitters is discussed. In conclusion, we present an original solution to combine coherently several QCL and thus address the power scaling issue in the mid-infrared.