Diss. Uppsala : Univ., 2004.

Research Project (M.B.A.) - Simon Fraser University, 2005. / Research Project (Faculty of Business Administration) / Simon Fraser University. Senior supervisor : Dr. Jennifer C. Chang. Includes bibliographical references (p. 39-41).

Research Project (M.B.A.) - Simon Fraser University, 2005. / Research Project (Faculty of Business Administration) / Simon Fraser University. Senior supervisor : Dr. Jennifer C. Chang. Includes bibliographical references (p. 39-41).

Σκοπός την εργασίας είναι η δημιουργία ενός ολοκληρωμένου ηλεκτρονικού καταστήματος το οποίο θα παρέχει στους χρήστες μεταξύ άλλων, δυνατότητα χωρικής αναζήτησης προϊόντων, και προσωποποίησης. Η εφαρμογή υποστηρίζει όλες τις λειτουργίες ενός σύγχρονου ηλεκτρονικού καταστήματος προσθέτοντας σε αυτές ένα πλήθος καινοτόμων λειτουργιών. Συγκεκριμένα υποστηρίζει λειτουργία καλαθιού αγορών και παραγγελιών μέσω πιστωτικής κάρτας χρησιμοποιώντας ένα εικονικό σύστημα τραπεζικών συναλλαγών, πλήθος λειτουργιών αναζήτησης προϊόντων, διαφορετικά είδη προσωποποίησης, πολλαπλά επίπεδα ασφάλειας με χρήση κρυπτογράφησης, δημιουργία λογαριασμών χρηστών, forum κα. Στις καινοτομίες της εφαρμογής συγκαταλέγονται η χωρική αναζήτηση προϊόντων με χρήση Τ.Κ., η αναζήτηση αντίστοιχων τιμών σε άλλα καταστήματα και η social προσωποποίηση με χρήση βαρών στους παράγοντες προσωποποίησης. Ιδιαίτερη βαρύτητα έχει δοθεί επίσης στην συντηρησιμότητα του συστήματος και στη φιλικότητα προς τον χρήστη. Οι τεχνολογίες που χρησιμοποιήθηκαν είναι κατά κύριο λόγο HTML, CSS, PHP, Postgresql, smarty και λειτουργικό σύστημα Linux. / The purpose of this thesis is the development of a comprehensive online store that supports all functions of a modern e-shop plus a host of innovative features. Specifically, the application supports shopping cart, orders pipeline using a virtual banking system, many search products features, different kinds of personalization, multiple levels of security using encryption, user accounts, forum etc.. Innovations in the application include spatial search for products using postal codes, search for corresponding values in other e-shops and social personalization using weights to the personalization factors. Special attention was also given to the maintainability of the system and user friendliness. For the implementation of the application were used HTML, CSS, PHP, Postgresql, smarty and Linux operating system.

The main aim of this diploma thesis is to analyse packaging free (zero waste) shops in the conditions of the Czech market from the point of view of consumers and selected zero waste stores. The thesis is divided into two parts: theoretical and practical. The theoretical part contains literary research which is mainly focused on basic information for understanding the essence of the diploma thesis. The practical part is based on two questionnaire surveys between consumers and selected packaging free shops. The objective of these questionnaire surveys is to confirm or reject predetermined hypotheses. The work concludes with summarization and evaluation of whole situation about this problem on the Czech market.

Com base em dados etnográficos de pesquisa realizada em alfaiatarias de Curitiba, este trabalho explora as habilidades e técnicas associadas ao processo de confecção de roupas sob medida tratando de compreender como gestos, materiais e instrumentos de trabalho atuam entre si produzindo não apenas roupas, mas também as habilidades dos próprios alfaiates e os corpos de seus respectivos clientes. A reflexão se dedica a investigação dessas práticas como processos de produção de conhecimento e está afinada com as proposições que repensam a relação entre o homem e a matéria. O eixo central da observação segue a sugestão de Tim Ingold (2013) de que o fazer é um processo de correspondência entre o fazedor e material, e não de imposição ou de aplicação de um conhecimento prévio. Sugere-se que, nos engajamentos estabelecidos entre ternos, alfaiates e clientes, aperfeiçoa-se, ao mesmo tempo, o corpo do cliente, que é modelado pela roupa sob medida adquirida, e as capacidades do alfaiate, que são constituídas pela roupa sob medida fornecida e pelas relações que estabelecem a partir da alfaiataria. Pretende-se, ao final, contribuir para o entendimento das transformações recentes deste campo de trabalho, em especial no que diz respeito ao surgimento de novas formas de praticar a alfaiataria. / Based on ethnographic research data from Curitiba\'s tailors, this work explores the skills and techniques associated with the tailoring process, with the goal of understanding to understand how gestures, materials and work tools interact with each other producing not only clothes, but also the tailors themselves and the bodies of their respective clients. Reflection is devoted on the investigation of these practices as processes of knowledge production, and is in tune with the propositions that rethink the relationship between man and matter. The central axis of observation follows the suggestion of Tim Ingold (2013) that doing is a process of correspondence between the maker and material, not imposition or application of prior knowledge. It is suggested that the client\'s body and the tailor\'s capabilities are modeled by tailor-made clothing in the compromises established between suits, tailors and clients. In the end, it is intended to contribute to the understanding of the recent transformations of this field of work, especially with regard to the emergence of new ways of practicing tailoring.

Submitted by Kamila Costa (kamilavasconceloscosta@gmail.com) on 2015-09-02T12:59:37Z No. of bitstreams: 1 Dissertação - Melquizedec A Rodrigues.pdf: 5096404 bytes, checksum: 822e44f66d8679d306ea87080653ce00 (MD5) / Approved for entry into archive by Divisão de Documentação/BC Biblioteca Central (ddbc@ufam.edu.br) on 2015-09-16T15:19:40Z (GMT) No. of bitstreams: 1 Dissertação - Melquizedec A Rodrigues.pdf: 5096404 bytes, checksum: 822e44f66d8679d306ea87080653ce00 (MD5) / Approved for entry into archive by Divisão de Documentação/BC Biblioteca Central (ddbc@ufam.edu.br) on 2015-09-16T15:26:22Z (GMT) No. of bitstreams: 1 Dissertação - Melquizedec A Rodrigues.pdf: 5096404 bytes, checksum: 822e44f66d8679d306ea87080653ce00 (MD5) / Made available in DSpace on 2015-09-16T15:26:23Z (GMT). No. of bitstreams: 1 Dissertação - Melquizedec A Rodrigues.pdf: 5096404 bytes, checksum: 822e44f66d8679d306ea87080653ce00 (MD5) Previous issue date: 2015-03-09 / Não Informada / The aim of this study is to determine the possible replacement percentage of cement per waste marbles and granites (WMG) of marble shops of Manaus in the production of self-compacting concrete (SCC). The methodology adopted was to hold various laboratory tests: characterization of each constituent material of the CAA; the rheological properties of SCC; and mechanical, physical and chemical properties in the hardened state of SCC. Two superplasticizers have been applied, one on the base and other salts of sulphonated polymer based whose optimum content was determined by testing the slurry Marsh cone. The coarse aggregates and kids were characterized by assays granulometry, specific weight; unit mass in loose state; and unitary mass compressed and dry. The WMG were subjected to density testing and analysis of Fluorescence X Ray. For fresh SCC in the following tests were performed: scattering, scattering T500, V funnel and L box; and Testing of Compressive Strength and flexion, absorption, voids index and the SCC Density in the hardened state, as well as tests on mortar bars to check possible Alkali Aggregate Reaction (AAR). The results were effective for most traits SCC, up to 30% of the cement replacement by WMG when the additive polymer base was used, and up to 20% replacement when the superplasticizer was sulfonated. Fresh in this SCC met the requirements of ISO 15823, behaving like proper concrete for use in most current applications. In the hardened state near showed compressive strength of 35 MPa, may also be used in the production of concrete floors. The resistance to bending achieved in around 7.0 MPa and satisfy the Brazilian standard 15805. For absorption values were comprised between 4.0% and 5.0%, lower than the values found in the literature, for voids and density values were close to other research, 10%. In AAR tests achieved the expansion was less than 0.10%, and the waste classified as harmless by Brazilian standard 15577-4. With the above it can be said that the residues from marble shops may have an alternative destination in civil construction. / O objetivo principal deste trabalho é determinar o percentual de substituição possível de cimento por resíduos de mármores e de granitos (RMG) das marmorarias de Manaus na produção de concreto autoadensável (CAA). A metodologia adotada foi a realização de vários ensaios laboratoriais: de caracterização de cada material constituinte do CAA; das propriedades reológicas do CAA; e das propriedades mecânicas, físicas e químicas do CAA no estado endurecido. Foram aplicados dois superplastificantes, um à base de sais sulfonados e outro à base de polímeros, cujo teor ótimo foi determinado por meio de ensaios de pasta no cone de Marsh. Os agregados graúdos e miúdos foram caracterizados por meio de ensaios de granulometria, massa específica; massa unitária em estado solto; e massa unitária em estado compactado e seco. Os RMG foram submetidos a ensaio de massa específica e análise de Fluorescência de Raios X. Para o CAA no estado fresco foram realizados os seguintes ensaios: Espalhamento, Espalhamento T500, Funil V e Caixa L; e Ensaios de Resistência à Compressão e à Flexão, Absorção, Índice de Vazios e Massa Específica do CAA no estado endurecido, bem como ensaios em barras de argamassas para verificar possível Reação Álcali Agregado (RAA). Os resultados mostraram-se eficazes para a maioria dos traços de CAA, com até 30% de substituição do cimento por RMG quando o aditivo a base de polímeros foi utilizado e de até 20% de substituição quando o superplastificante foi o sulfonado. No estado fresco esse CAA atendeu aos requisitos da NBR 15823, se comportando como concreto adequado para utilização na maioria das aplicações correntes. No estado endurecido apresentaram resistência à compressão próximas de 35 MPa, podendo também ser utilizado na produção de pavimentos de concreto. As resistências à flexão alcançadas, em torno de 7,0 MPa, e satisfazem a NBR 15805. Para absorção os valores ficaram compreendidos entre 4,0% e 5,0%, menores que os valores encontrados na literatura, para o índice de vazios e massa específica os valores ficaram próximos de outras pesquisas, 10%. Nos ensaios de RAA as expansões alcançadas foram menores que 0,10%, sendo os resíduos classificados como inócuo pela NBR 15577-4. Com o exposto pode-se afirmar que os resíduos de marmorarias podem ter uma destinação alternativa na construção civil.

M.Tech. (Somatology) / The somatology industry has seen a rapid advancement in the use of technology to address physical concerns of clients in terms of addressing the visible signs of skin ageing, issues around centimetre reduction, cellulite and other aspects. In South Africa, the Somatology curricula vary between public and private higher education institutions. Even more diversity has been noted within the private somatology higher education providers. The electrical equipment curriculum that is taught in specifically nationally and/or internationally accredited private institutions has not been updated in years and is perceived as outdated. These students are still being taught and examined on electrical equipment that was popular during the 1980’s and that have since been replaced with updated and modern machines. The purpose of this study was to establish the perceived proficiency of newly-qualified nationally and/or internationally accredited graduates in using electrical equipment currently used in the modern health and skincare industry. This study made use of a mixed method design, incorporating three different data-collection techniques. These techniques included unstructured and semi-structured personal telephone interviews and structured questionnaires. Collecting data from three perspectives allowed for triangulation, ensuring validity and reliability. The results of this study concluded that the graduates, from selected specified nationally and/or internationally accredited private higher education institutions, did not deem themselves to be proficient in the use of modern electrical equipment. This sentiment was supported by their employers in the health and skincare industry, and verified by the lecturers who facilitated their learning during their two-year qualification.

Para el presente trabajo de investigación, se decidió hacer un estudio de mejora integral de los procesos en la empresa Claudia Cupcakes E.I.R.L., para lo cual, tomando en cuenta los conocimientos adquiridos a lo largo de la carrera de Ingeniería Industrial, se plantearon algunas propuestas de mejoras para los problemas identificados en la empresa, a fin de contribuir a su crecimiento y desarrollo. / For the recent research, it was decided to make a study of comprehensive improvement of processes in the company Claudia Cupcakes EIRL, for which, taking into account the knowledge acquired throughout the career of Industrial Engineering, some improvements proposals were raised to the problems identified in the company, in order to contribute to their growth and development. / Trabajo de investigación

The purpose of this study is to determine the pupil load in relationship to the amount of equipment available for use in industrial arts classes in the junior high schools of Texas.