Some interesting electronic and dynamic properties of semiconductor nanocrystal heterostructures have been investigated using various spectroscopic methods. Semiconductor nanocrystal heterostructures were prepared using colloidal synthesis techniques. Ultrafast transient absorption spectroscopy was used to monitor the relaxation of hot electrons in CdS/HgS/CdS quantum dot quantum wells. Careful analysis of the hot electron relaxation in CdS/HgS/CdS quantum dot quantum wells reveals an energy dependent relaxation mechanism involving electronic states of varying CdS and HgS composition. The composition of the electronic states, combined with the layered structure of the nanocrystal permits the assignment of CdS localized and HgS localized excited states. The dynamic effect of surface passivation is then shown to have the strongest influence on excited states that are localized in the HgS layer. New quantum dot quantum well heterostructures of different sizes and compositions were also prepared and studied. The dynamic properties of CdS/CdSe/CdS colloidal quantum wells suggest simultaneous relaxation of excited electrons within the CdS core and CdSe shell on the sub-picosecond time scale. Despite the very different electronic structure of CdS/CdSe/CdS compared to CdS/HgS/CdS, the time scales of the relaxation and electron localization were very similar. Enhancement of trap luminescence was observed when CdS quantum dots were coated with silver. The mechanism of the enhancement was investigated using time-resolved spectroscopic techniques.

This thesis focused on making composites consisting of a polymethylmethacrylate matrix, with various carbon fillers. The fillers that were examined were 3 different carbon blacks: N-550, N-772 and pureblack, and short multi-wall carbon nano-tubes. The carbon fillers were coated onto the polymethylmethacrylate, and compression molded in order to form a segregated microstructure. The goal of this thesis is to compare the electrical and optical properties of the composites consisting of a segregated microstructure, containing various carbon fillers. Scanning electron microscopy was used to investigate the fracture surface of the composites. Impedance Spectroscopy measured the electrical response of the material, and was used to determine the conductivity and dielectric properties of the composites and estimate the percolation threshold. The multi-wall carbon nano-tubes were found to have the lowest percolation threshold, due to their rod like structure. All of the carbon black fillers displayed similar characteristics in their conductivity and dielectric properties. As the filler content increased, the conductivity and the dielectric constant of the composites increased. Optical absorption measurements determined the amount of light that travel through the specimen. These measurements, showed that the absorbance for the carbon black sample N-550 were lower than the multi-wall carbon nano-tubes at filler contents below a phr of 0.1 The absorption of the carbon black samples was then higher than multi-wall carbon nano-tubes at phrs higher than 0.1. This was found to be related to the nano-tubes starting to form a segregated microstructure at lower filler contents than the sphere-like carbon black nano-particles.

Isotropically conductive adhesives (ICAs) are promising as a lead-free interconnect material; However, ICAs have a higher resistivity compared to tin/lead solder. The higher resistivity of ICAs results from the large contact resistance between conductive fillers. Several novel approaches to engineer the interface between electrically conductive fillers were studied to develop highly conductive ICAs. Shown in this dissertation are three methodologies to reduce contact resistance: low temperature sintering, fast sintering and in-situ reduction. Furthermore, two approaches, surface modification and in-situ protection, were developed to prevent oxidation and corrosion of silver-coated copper flakes to produce low cost ICAs. The findings and insights in this dissertation significantly contribute to (1) understanding of filler-filler, filler-polymer and structure-property relationships of ICAs; (2) the structural design and formulation of high performance ICAs; and (3) the wider use of ICAs in emerging applications such as printed electronics and solar cells.

Piezoresistive microcantilevers can be used for the detection of biological and chemical substances by measuring the change in surface stress. Design parameters for the cantilever and piezoresistor dimensions are investigated analytically and through finite element modelling. Based on these results, six optimized cantilever types are designed and fabricated with microfabrication methods. The electrical and mechanical properties of these devices as well as their deflection and surface stress sensitivities are characterized and compared to the models. A second generation of cantilevers that incorporates heater areas to trigger or enhance chemical reactions is designed and fabricated. In addition to the measurements done for the first generation devices, the thermal properties for both steady-state and transient operation of these microcantilevers are characterized.

The positive temperature coefficient of resistivity (PTCR) sensors is resistor materials that undergo a sharp change in resistivity at a designed Curie temperature due to its unique structure and chemical composition. This effect serves important control functions in a wide variety of electronic circuitry and similar applications. Conventional calcining of mixed oxides method (CMO) is used for fabricating lanthanum doped barium titanate (BaTiO3) for PTCR behaviour through solid-state-sintering route, at 1100°C, 1350°C. Two batches of samples were fabricated at low and high sintering temperatures of 1100°C, 1350°C respectively. The effect of different concentrations of donor dopant on BaTiO3 on the electrical properties of Ba(1-x)LaxTiO3 with x= 0.0005, 0.001, 0.002, 0.0025, 0.003 mol%, is investigated at low sintering temperature. The influence of lantanum doping with Al2O3+SiO2+TiO2 (AST) as sintering aids on the electrical properties of Ba(1-x)LaxTiO3 with x= 0.0005, 0.001, 0.003 mol%, is also investigated. The results of the electrical characterization for the first batch of samples showed an increase in room temperature resistance with increaisng donor concentration. Also the results of the electrical characterization for the second batch of samples also showed the same increase in room temperature resistance with increasing donor concentration. For first batch of sensors the high room temperature resistance keeps the jump small and these materials showed V-shaped NTCR-PTCR multifunctional cryogenic sensor behavior with a strong negative coefficient of resistance effect at room temperature.Where as the second batch of sensors showed few orders of magnitude rise in resistivity values. The La-doped BaTiO3 ceramics co-doped with Mn gives an enhanced PTCR effect which can be exploited for various sensor applications.

[Truncated abstract] The cochlea presumably possesses a number of regulatory mechanisms to maintain cochlear sensitivity in the face of disturbances to its function. Evidence for such mechanisms can be found in the time-course of the recovery of CAP thresholds during experimental manipulations, and in observations of slow oscillations in cochlear micromechanics following exposure to low-frequency tones (the “bounce phenomenon”) and other perturbations. To increase our understanding of these oscillatory processes within the cochlea, and OHCs in particular, investigations into cochlear regulation were carried out using a combination of mathematical modelling of the ionic and mechanical interactions likely to exist within the OHCs, and electrophysiological experiments conducted in guinea pigs. The electrophysiological experiments consisted of electrocochleographic recordings and, in some cases, measurement of otoacoustic emissions, during a variety of experimental perturbations, including the application of force to the cochlear wall, exposure to very-low-frequency tones, injection of direct current into scala tympani, and intracochlear perfusions of artificial perilymph containing altered concentrations of potassium, sodium, and sucrose. To obtain a panoramic view of cochlear regulation under these conditions, software was written to enable the interleaved and near-simultaneous measurement of multiple indicators of cochlear function, including the compound action potential (CAP) threshold, amplitude and waveshape at multiple frequencies, the OHC transfer curves derived from low-frequency cochlear microphonic (CM) waveforms, distortion-product otoacoustic emissions (DPOAEs), the spectrum of the round-window neural noise (SNN), and the endocochlear potential (EP). ... The mathematical model we have developed provided a physiologically-plausible and internally-consistent explanation for the time-courses of the cochlear changes observed during a number of different perturbations. We show that much of the oscillatory behaviour within the cochlea is consistent with underlying oscillations in cytosolic calcium concentration. We conclude that a number of the discrepancies between the simulation results and the experimental data can be resolved if the cytosolic calcium functions as two distinct pools: one which controls basolateral permeability and one which controls slow motility. This two-calcium-pool model is discussed.

Αντικείμενο της παρούσης διδακτορικής διατριβής αποτελεί ο υπολογισμός των ηλεκτρικών πολυπολικών ροπών (διπολική έως και δεκαεξαπολική) ακετυλενικών αλυσίδων οι οποίες υπάγονται στους γενικούς τύπους H-(C≡C)n-H, Χ-(C≡C)n-H και Χ-(C≡C)n-X, n=1–7, X=F, Cl, Br, I, CN, NC, η συστηματική μελέτη των (υπερ)πολωσιμοτήτων των μη υποκατεστημένων ακετυλενικών αλυσίδων Η-(C≡C)n- H, n=3–7 και τέλος ο υπολογισμός των ηλεκτρικών ιδιοτήτων αλληλεπίδρασης συστημάτων του τύπου Η-(C≡C)n-H…Ηe, n=1–7. Σε όλες τις περιπτώσεις χρησιμοποιήθηκαν οι ab initio μέθοδοι SCF και MP2 καθώς και οι ευρέως χρησιμοποιούμενες DFT μέθοδοι B3LYP, B3PW91 και mPW1PW91. Στους υπολογισμούς των ηλεκτρικών πολυπολικών ροπών χρησιμοποιήθηκε η βάση ccpVDZ σε όλες τις περιπτώσεις και ιδιαίτερη έμφαση δόθηκε στον τρόπο μεταβολής των υπό μελέτη ιδιοτήτων με την μεταβολή του υποκαταστάτη στα άκρα της αλυσίδας. Στους υπολογισμούς των ηλεκτρικών (υπερ)πολωσιμοτήτων των μη υποκατεστημένων ακετυλενικών αλυσίδων Η-(C≡C)n-H χρησιμοποιήθηκαν ελάχιστα πολωμένα σύνολα βάσης και πραγματοποιήθηκε σύγκριση με τα αποτελέσματα που προέκυψαν από την χρήση μεγαλύτερων συνόλων βάσης. Για τον υπολογισμό των εν λόγω ιδιοτήτων χρησιμοποιήθηκε η μέθοδος του πεπερασμένου πεδίου. Τέλος πραγματοποιήθηκαν υπολογισμοί των ηλεκτρικών ιδιοτήτων αλληλεπίδρασης συστημάτων Η-(C≡C)n-H…Ηe για δυο συγκεκριμένες διαμορφώσεις ενώ για την αποφυγή του σφάλματος υπέρθεσης συνόλου βάσης χρησιμοποιήθηκε η υπερμοριακή προσέγγιση των Boys-Bernardi. / The purpose of the present doctoral dissertation is the calculation of the electric multipole moments (dipole up to hexadecapole) of acetylenic chains under the general formulas H-(C≡C)n-H, Χ-(C≡C)n-H and Χ-(C≡C)n-X, n=1–7, X=F, Cl, Br, I, CN, NC, the systematic study of the (hyper)polarizabilities of the non substituted acetylenic chains Η-(C≡C)n-H, n=3–7 and finally the calculation of interaction induced electric properties of systems of the general formula Η-(C≡C)n-H…Ηe, n=1– 7. In all cases considered the ab initio SCF and MP2 methods have been used along with the very popular DFT methods B3LYP, B3PW91 and mPW1PW91. For the electric multipole moment calculations the cc-pVDZ basis set has been used in all cases and special attention has been paid in the way the properties of interest change by changing the substituent at the ends of the acetylenic chains. For the electric (hyper)polarizability calculations on the non substituted acetylenic chains H-(C≡C)n- H minimally polarized basis sets have been used and comparison was made with the results obtained by using larger basis sets. In order to calculate the above mentioned properties the finite field method was applied. Finally, calculations were performed in order to calculate the interaction induced electric properties of the systems Η-(C≡C)n- H…Ηe for two particular configurations while in order to avoid the basis set superposition error the Boys-Bernardi counterpoise method has been applied.

La présence de charges libres a des conséquences considérables sur les propriétés diélectriques des matériaux. Pour mettre en évidence ces contributions, nous avons étudié l’influence de contraintes électriques et magnétiques sur des monocristaux de BaTiO3 dopé Fer et de KTiOPO4 (KTP). Dans BaTiO3, l’application d’un champ magnétique perturbe le mécanisme de pertes diélectriques résultant de mécanismes polaroniques. Dans le KTP c’est la localisation des ions K+ qui est perturbée par un champ électrique comme nous l’avons démontré en étudiant la séparation des raies de résonances piézoélectriques. Dans une deuxième partie, nous avons synthétisé et étudié la polarisation de phosphates de composition BaFeTi(PO4)3 and BiFe2(PO4)3. Cependant, l’ion Bi3+ n’est jamais positionné sur son site d’inversion, ce qui est prometteur. Enfin, nous avons étudié la spinelle Co3O4 par spectroscopie diélectrique et RPE et nous avons montré l’induction d’un état polaire sous l’effet d’un champ magnétique. / The mobility of free charges and its localization mechanism has considerable effect on the dielectric properties of the materials. Therefore single crystal of Fe doped BaTiO3 and KTiOPO4 (KTP) which have predominantly electronic and ionic conductivity respectively were studied under external stresses like electric and magnetic field. The application of external magnetic field affects the hopping of electrons which lead to tuning of polaron losses in BaTiO3 whereas in case of KTP localization of K+ ions give rise to splitting of piezoelectric resonance and it can be tuned by external electric field. In the second part new phosphates of formula BaFeTi(PO4)3 and BiFe2(PO4)3 were synthesized to look for polarization property. However Bi3+ ions are not localized on their inversion symmetry site which is promising. Finally spinel Co3O4 was investigated under dielectric and Electron Paramagnetic Resonance spectroscopy which reveal an induction of polar state under external magnetic field.

xv, 101 p. ; ill. (some col.) A print copy of this title is available through the UO Libraries under the call number: KNIGHT QC176.84.E5 P47 2007 / Silver films with nanoscale to mesoscale thicknesses were produced by chemical reduction onto silica substrates and their physical and electrical properties were investigated and characterized. The method of silver deposition was developed in the context of this research and uses a single step reaction to produce consistent silver films on both flat silica coverslips and silica nanospheres of 250-1000 nm. Both the structure and the electrical properties of the silver films are found to differ significantly from those produced by vacuum deposition. Chemically deposited (CD) silver is not uniformly smooth, but rather is granular and porous with a network-like structure. By quantitatively accounting for the differences in scale, geometry, and microstructure of the CD films, it is found that the same models used to describe the resistivity of vacuum deposited films may be applied to CD films. A critical point in the analysis that allows this relation involves the definition of a geometric parameter, g, which replaces the thickness, t, as the critical length that influences the electrical properties of the film. The temperature dependent properties of electrical transport were also investigated and related to the microstructure of the CD films. A detailed characterization of CD silver as shells on silica spheres is also presented including physical and optical properties. In spite of the rough and porous morphology of the shells, the plasmon resonance of the core-shell structure is determined by the overall spherical shell structure and is tunable through variations in the shell thickness. Preliminary investigations into the electrical transport properties of aggregates of silver coated spheres suggest similarities in the influence scale, geometry, and microstructure to silver films on flat substrates. The aggregates of shells also exhibit pressure related resistance behavior due to the composite structure. / Adviser: Miriam Deutsch

The effects of optical heating via infrared free carrier absorption on the electron magneto-transport properties of n-InSb at helium temperatures have been studied for the first time. Oscillatory photoconductivity (OPC) type structure is seen in the photon energy dependence of the transport properties. A C0₂ laser (hω = 115 to 135 meV) was used as the optical source. Concentrations between 1 x 10¹⁵ cm⁻³ and 2 x 10¹⁶ cm⁻³ were studied. The conclusions of this study are that the energy relaxation of high energy photoexcited electrons, generated by free carrier absorption of C0₂ laser radiation in degenerate n-InSb at liquid helium temperatures, is by emission of a maximum number of optical phonons, and that this relaxation mechanism produces OPC type structure in the photon energy dependence of the electron temperature of the conduction band electron gas. This structure is seen, therefore, in the transport properties of the sample, including the Shubnikovde Haas effect, the effective absorption coefficient, and the photoconductivity (mobility) response (lower concentrations only). In addition, the highest concentration studied, nₑ = ~2 x 10¹⁶ cm⁻³, sets an experimental lower limit on the concentration at which electron-electron scattering will become the dominant energy relaxation mechanism for the photoexcited electrons, since OPC effects were present in this sample.