The aim of this master‘s thesis was design a new communication interface for spectral analyzer Seaward EMC Spectrum Receiver, which instead of the RS 232 interface is connected to a computer via the USB interface. This thesis contains both hardware and software solution based on the analysis and comprehensive understanding of communication between the spectrum analyzer and the computer. Further it contains the whole realization of communication interface and an example of measurement of the EMC problems too. Last part of this thesis was a realization of the automatic measurement via the development environment MATLAB and Agilent VEE, which was used for measurement of noise background.

Drei numerische Feldberechnungsverfahren - die Momentenmehtode, die Einheitliche Geometrische Beugungstheorie und die Verallgemeinerte Multipoltechnik - werden schrittweise zu einer Erweiterten Hybridmethode (EHM) kombiniert. Dabei wird jeder einzelne Kombinationsschritt anschaulich anhand von Beispielen erläutert, die den Vorteil der EHM verdeutlichen: Mit diesem Verfahren lassen sich bestimmte Anordnungen äußerst effektiv analysieren.

Folien aus mehrwandigen Kohlenstoffnanoröhren, auch Buckypaper genannt, stellen eine vielversprechende Alternative zu herkömmlichen Schirmmaterialien für elektromagnetische Strahlung dar. Zum Aufbau eines grundlegenden Verständnisses und zur Verbesserung der Verarbeitbarkeit gegenüber kommerziell erhältlichem Buckypaper, wurden nach Auswahl eines geeigneten Herstellungsverfahrens Buckypaper aus unterschiedlichen Nanomaterialien hergestellt. Zur Untersuchung der Auswirkung ausgewählter Herstellungsparameter erfolgte dabei eine Parametervariation mittels statistischer Versuchsplanung. Zusätzlich wurden im Vorfeld weitere Einflussfaktoren betrachtet. Dadurch konnten unterschiedliche Einwaagemengen und Rohmaterialien, verschiedene Lösungsmittel und Konzentrationen der Nanomaterialien sowie diverse Prozessparameter des angewandten Nassprozesses untersucht werden. Im Rahmen der Charakterisierung der hergestellten Proben, mittels unter anderem Vierleiter- und Schirmdämpfungsmessung sowie Rasterelektronenmikroskopie, wurden die signifikanten Einflüsse der untersuchten Parameter identifiziert und beschrieben. Es konnten dadurch sehr homogene Buckypaper mit hoher Leitfähigkeit und guter Schirmungseffektivität hergestellt werden, die eine verbesserte Grundlage für die weitere Entwicklung mikrostrukturierter Schutzfolien bilden. Aus dem Ergebnis der Arbeit lassen sich optimale Herstellungsparameter von Buckypaper für den Einsatz als Schirmmaterial im Bereich der elektromagnetischen Verträglichkeit ermitteln. / Freestanding multiwalled carbon nanotube sheets, also known as buckypaper, represent a promising alternative for various applications, especially for electromagnetic interference shielding. In order to develop a fundamental understanding and improve the processability compared to commercially available buckypaper, sheets from different nanotube materials were produced after a suitable manufacturing process had been selected. Design of experiments was used to investigate the effects of various manufacturing parameters. Other influencing factors were considered in advance. Several raw materials of different weights, varying solvents and concentrations of the nanomaterials as well as various processing parameters of the applied wet process were thereby examined. Significant influences on the properties of produced buckypaper were identified during characterization by, among other means, four-point probe, shielding attenuation measurements and scanning electron microscopy. From the result, optimal manufacturing parameters can be determined. Thus, very homogeneous buckypaper with high electrical conductivity as well as good mechanical strength and shielding effectiveness could be produced. This provides a solid foundation for further development of frequency selective electromagnetic interference shields.

One of the emerging phenomena of global competition is the increasing participation of firms from emerging economies in various industries and across value chain activities. These MNCs from developing and emerging economies have recently shown an unprecedented increase in numbers (from only 19 firms in 1990 featured in the Fortune 500 list to 47 in 2005) (UNCTAD, 2006). While these Emerging Nation Multinational Companies (EMCs) are gaining a strong foothold in the global economy, some evidence also suggests that their foreign direct investments are being targeted towards advanced economies in both resource industries and higher-value adding activities. On the face of it, the disadvantages of being a late entrant seem overwhelming and based on the stages model of internationalization the EMCs may not be able to compete against global giants whose dominance is rooted in their first-mover status (Bartlett & Goshal, 2000). However, the success of EMCs like the Tata Motors, Lenovo, and the like raise an important research issue as to what are the strategies these EMCs pursue as they begin to compete in the global competitive landscape? In the past, scholars have conducted substantial research on internationalization, Multinational Companies (MNCs), and Foreign Direct Investment (FDI) which explain the behavior of first-mover MNCs from developed countries based on technological superiority. Those theories were developed within a specific environmental context and do an adequate job to explain a fairly specific set of observed firm behaviors. Each, within its context, may be fairly adequate at explaining those behaviors. However, the emergence of EMCs in the global economic environment highlights that times have changed and the incumbent MNCs (studied earlier) constantly face threats from these emerging giants. As the context changes, so has the ability of the prior internationalization theories to explain behaviors observed in this global economy diminished considerably. Lately, a few researchers have started a new line of research to uncover some distinct characteristics of these EMCs. However, very little is known about the foreign expansion strategies of these EMCs and warrants a need to explore this phenomenon in-depth. In order to bridge this gap in the literature this dissertation uses an inductive approach by conducting multiple case-studies to understand the foreign expansion strategies of sixteen companies that originate from two key emerging nations: India and China. This exploratory approach supported by computerized content analysis of longitudinal text data allows us to observe the significance of specific constructs, begin to detect patterns and regularities in the behavior of EMCs and compare EMCs originating from various emerging nations. Methodologically, the dissertation illustrates the usefulness of semantic network analysis tools, especially centering resonance analysis, in identifying and interpreting the concepts that provide coherence to set of textual data. Further, using factor analysis we identify some key themes that explain the foreign expansion strategies of these EMCs. The results of this study suggest that EMCs' expansion is, on one hand, based on their ability to acquire resources and absorb them to build their own advantage (supply side dynamics). On the other hand, it is also based on EMCs' ability to find some market niches, i.e., entering into markets untapped by traditional MNCs (demand side dynamics). Finally, based on our analysis of these in-depth case-studies we identify some propositions as anchors for further theory building. Specifically, we identify three major anchors, namely, EMCs' ability to `Lick the Dirt'; `Cash Rich Positions of EMCs' and `Strategic Partnerships with Developed Country Firms' that enhance their `Competitive Advantage in Developed Nations'. / Business Administration

Presented in this thesis are the following experimental and theoretical investigations carried out on the three-layer electromagnetically coupled (EMC) circular microstrip antennas and their arrays. 1.Three-Layer EMC Circular Microstrip Antenna A three-layer EMC circular microstrip antenna consists of a probe-fed circular microstrip patch having two parasitically excited circular microstrip patches (without ground planes) stacked above it, with air gaps in between successive substrates. In the "inverted" configuration, the parasitic patches are on the lower (nearer to the driven substrate) surface of the substrate. An exhaustive experimental study of the resonant frequencies, input impedance, impedance bandwidth and radiation characteristics of this antenna, has been carried out for both the "normal" and the "inverted" configurations. Based on this experimental study, the design and optimisation of the antenna have been discussed and experimentally tested. In the S-band, it is found that an impedance bandwidth as high as 20 percent coupled with good patterns, high gain and low cross-polarisation levels, have been obtained. 2.Three-Layer EMC Circular Microstrip Antenna Arrays Experimental work has also been carried out on linear arrays of three-layer EMC circular microstrip antennas. The design of a linear array both in the E- and H- planes, of the three-layer microstrip antennas in their "normal" as well as "inverted" configurations, has been discussed and realisation carried out. Impedance bandwidths of the arrays have been experimentally found to be the same as that of the three-layer antenna element High gain and good pattern shape with sidelobes as well as cross-polarisation levels better than -20 dB through a scan angle of 40°, have been realised. A study of the mutual coupling between two-layer as well as three-layer EMC circular patch elements has also been carried out for the useful range of interelement spacings. 3.Theoretical Analysis of Resonant Frequencies of Multilayer Patch Structures Theoretical investigations have been carried out on the resonance properties of single-layer and multilayer EMC patch structures employing the full-wave analysis based on spectral domain immittance approach. The impedance Green's functions for all these structures have been derived from the combination of equivalent transverse transmission lines concept Galerkin's method is employed in the spectral (Hankel) transform domain where two sets of disk current expansions are used for obtaining die characteristic equation. By solving the characteristic equation, the resonant frequencies are obtained for various values of the parameters of the layered antenna.

>Magister Scientiae - MSc

This paper deals with the determination of the capillary pore-size distribution (CPSD) and equilibrium moisture content (EMC) of untreated and thermally modified (TM) Norway spruce [Picea abies (L.) Karst.] by means of the pressure plate technique (PPT). Desorption experiments were conducted at very high values of relative humidity (RH) in the range between 99.2% and 100%. The thermal modification of spruce results in an alteration of the CPSD, owing to the formation of intercellular cracks in the middle lamella, as a result of cell-wall compression. The desorption curves for both untreated and TM spruce show an extremely upward bend at 99.97% RH. This step reflects an EMC of 38.1% for untreated spruce and 33.8% for TM spruce. None of the samples shrunk during the PPT measurements. Following desorption experiments at 97.4% RH, all samples shrunk. This step reflects an EMC of 27.9% for untreated spruce and 21.7% for TM spruce.

>Magister Scientiae - MSc / The Kuils River Catchment is an urban river catchment that forms part of the larger Kuils-Eerste River system draining the eastern half of the Cape Metropolitan Authority area and Stellenbosch Municipality. Rapid urbanisation has resulted in the encroachment of residential and industrial areas into the river system through channelization and sewage disposal. This research project intends to assess the quality of surface runoff in the Kuils River catchment and determining non-point source pollutant loading rates in the catchment using GIS-based modelling. The study results show how modelled potential sources of surface runoff and NPS pollutants using desktop GIS analysis tools in a sequential process that involved different levels of software applications could explain the characteristics of the catchment. With the help of the Expected Mean Concentration (EMC) values associated with surface runoff from land use/covers, NPS pollutant loads were assessed downstream towards the Kuils River Catchment outlet using the Nonpoint Source Pollution and Erosion Comparison Tool (N-SPECT) based in ArcGIS. The outputs from this model consist of predicted annual pollutant loading (mg/mvyear) for each Kuils-Eerste River that occurs in the catchment. The results have shown clearly the spatial distribution of sources of particular pollutants in the catchment. Further or advanced processing knowhow with this model might provide far reaching insights into the problem and it is however recommended that these results produced using N-SPECT be compared to those of other hydrologic models using the same inputs.

The aim of the thesis is the design and realization of the oscilloscope module with wireless data transfer. One part of the thesis is a short overview of the different types of AD converters. The main part is focused on the hardware configuration that allows modification of the wireless module of the oscilloscope, and the possibility of using in the industrial zone. The design takes into account reducing of consumption and EMC compatibility.

Within the military there is great need for reliable communication between vehicles. During the planning and construction of a military RIB, Rigid-hulled Inflatable Boat, it is important to design an efficient antenna system that does not deteriorate out of disorder. It must also be ensured that the antennas transmitted power does not stay in the RIB boat. We have been given assignment to model and simulate a proposed antenna system and assess which tool is best suitable for the task. To analyze the antenna system we will look at the radiated electrical field together with the reflectionand EMC properties. The tool that we choose to use is a software called EMPro produced by Keysight Technologies. In this program we will create 3Dstructures for each individual object, the boat, the three antennas and the seawater. It’s also important to include each objects properties concerning material, so that they correctly reflect the reality. We are covering a broad spectrum with our antennas reaching from 1.6-30MHz, 30-88MHz and 100512MHz. The resulting simulation verifies that electromagnetic field would be powerful enough and that the antennas would not affect each other with the proposed placement. We could also confirm that our antennas reflected an inordinate amount of power but with cause that our models were not an exact replica of the antenna. The software EMPro is a suitable tool for this kind of projects concerning modeling and simulating antenna systems.Within the military there is great need for reliable communication between vehicles. During the planning and construction of a military RIB, Rigid-hulled Inflatable Boat, it is important to design an efficient antenna system that does not deteriorate out of disorder. It must also be ensured that the antennas transmitted power does not stay in the RIB boat. We have been given assignment to model and simulate a proposed antenna system and assess which tool is best suitable for the task. To analyze the antenna system we will look at the radiated electrical field together with the reflectionand EMC properties. The tool that we choose to use is a software called EMPro produced by Keysight Technologies. In this program we will create 3Dstructures for each individual object, the boat, the three antennas and the seawater. It’s also important to include each objects properties concerning material, so that they correctly reflect the reality. We are covering a broad spectrum with our antennas reaching from 1.6-30MHz, 30-88MHz and 100512MHz. The resulting simulation verifies that electromagnetic field would be powerful enough and that the antennas would not affect each other with the proposed placement. We could also confirm that our antennas reflected an inordinate amount of power but with cause that our models were not an exact replica of the antenna. The software EMPro is a suitable tool for this kind of projects concerning modeling and simulating antenna systems. / Inom militären finns stort behov av pålitlig kommunikation mellan fordon. Vid konstruktion av ett småfartyg i militärtoch bevakningssyfte är det viktigt att designa ett välfungerande antennsystem som inte försämras utav störningar, det ska även ses till att antennernas utsända effekt inte fastnar i småfartyget. Vi har fått en ritning av hur antennplaceringen är planerad, denna rapport går ut på att verifiera dess funktionalitet samt hitta en mjukvara som kan användas för att verifiera olika antennsystem. För att bedöma antennsystemet kommer denna rapport att undersöka att dess elektriska fält samt reflektionsoch EMC egenskaper, en uppgift som kan lösas med programvaran EMPro (Keysight). I programvaran skapas en 3Dstruktur som innehåller småfartyget, dess 3 stycken antenner samt omfattande havsvatten. Här tas hänsyn till objektens materialegenskaper, antennernas jordning samt de frekvenser antennerna arbetar på, 1.6-30MHz, 30-88MHz samt 100-512MHz. Simulering av systemet gav positiva resultat kring antennsystemets elektromagnetiskafält, antennerna kommer inte heller att störa varandra. Antennerna som vi har modellerat reflekterar orimligt mycket effekt, detta bortser vi från då vi inte haft tillgång till exakt avbildning av antennerna. EMPro är ett verktyg som är lämpligt att använda i detta samt liknande projekt. Dock krävs det att en kraftig dator finns tillgänglig då simuleringar av stora antennsystem baseras på stora uträkningar, som generellt tar lång tid.