Spelling suggestions: "subject:"ferromagnetic than films"" "subject:"ferromagnetic then films""
1 |
Observation of linear and nonlinear magnetostatic waves by Brillouin light scatteringBoyle, Jonathan William January 1995 (has links)
No description available.
|
2 |
Magnetization dynamics in NiFe thin filmsSantoni, Albert 12 April 2011 (has links)
The morphology, composition, and magnetic properties of NiFe thin films were characterized. Films with thicknesses up to 137 nm were deposited in an RF induction evaporator at high vacuum (10^-8 mbar). Time resolved magneto-optic Kerr effect microscopy (TR-MOKE) was used to measure the Gilbert damping constant, an important dynamic magnetic property with applications to magnetic data storage. The composition of each film was measured with energy-dispersive X-ray (EDX) microscopy and used to determine the weight percent of Ni and Fe in each film.
A trend of increased damping with increased thickness was found, in agreement with published results. Magnetic properties and roughness were found to differ significantly from previous films grown in the same vacuum chamber by Rudge, and are attributed to different growth modes produced by differing deposition conditions. However, the weight percent of Ni in each film was found to be inconsistent, deviating by up to 7% from the Ni80Fe20 evaporation source. Inconsistent composition, caused by the inability to control deposition parameters, prevents insight into Gilbert damping from being drawn from the analysis. / Graduate
|
3 |
TORQUE RESPONSE OF THIN-FILM FERROMAGNETIC PRISMS IN UNIFORM MAGNETIC FIELDS AT MACRO AND MICRO SCALESTorabi, Soroosh 01 January 2017 (has links)
The non-contact nature of magnetic actuation makes it useful in a variety of microscale applications, from microfluidics and lab-on-a-chip devices to classical MEMS or even microrobotics. Ferromagnetic materials like nickel are particularly attractive, because they can be easily deposited and patterned using traditional lithography-based microscale fabrication methods. However, the response of ferromagnetic materials in a magnetic field can be difficult to predict. When placed in a magnetic field, high magnetization is induced in these ferromagnetic materials, which in turn generates force and/or torque on the ferromagnetic bodies. The magnitude and direction of these forces are highly dependent on the type of material used, the volume and aspect ratio of the ferromagnetic material, as well as the spatial distribution and magnitude of the magnetic field. It is important to understand these complex interactions in order to optimize force and torque generated, particularly given common limitations found in microfabrication, where it is often challenging to deposit large volumes of ferromagnetic material using conventional microdeposition methods, and power availability is also often limited, which in turn limits the ability to generate strong electromagnetic fields for actuation.
This work represents a theoretical analysis and experimental validation in macro scale to determine best practices when designing ferromagnetic actuators for microscale applications. Specifically, the use of nickel thin film prisms actuated in spatially uniform electromagnetic fields. These constraints were chosen because uniform magnetic fields can be readily generated with a simple and inexpensive Helmholtz coil design, and the uniformity makes actuation force independent of location, minimizing the need for spatial precision in devices. Nickel can also be easily deposited using evaporation or sputtering, generally in forms of thin-films.
|
4 |
Conception et réalisation de micro-capteurs à magnéto-impédance pour le contrôle non destructif / Design and realization of magneto-impedance microsensors for nondestructive testingPeng, Tao 16 December 2014 (has links)
La capacité à détecter des micro-défauts ou des défauts profonds dans les pièces métalliques constitue un enjeu important pour l'industrie de l'aéronautique ou du nucléaire. La technique de contrôle non destructif (CND) par courant de Foucault est souvent utilisée pour cette application. Cette thèse s’inscrit dans le cadre d'une collaboration ayant pour but la réalisation et l'intégration de micro-capteurs de champ magnétique basés sur l’effet de magnéto-impédance (MI) à des systèmes de détection par CND. Ces micro-capteurs de structure multicouche (ferromagnétique/conducteur/ferromagnétique) ont été élaborés en salle blanche par dépôt de films minces. Un traitement thermique sous champ magnétique a ensuite permis d’optimiser les propriétés du matériau et d’induire des anisotropies dans le plan des couches ferromagnétiques. Une méthode basée sur la double démodulation d’amplitude du signal de mesure a été proposée pour la caractérisation dynamique des capteurs. Les paramètres importants tel que la géométrie, l’anisotropie et la fréquence d’excitation ont été étudiés afin d’optimiser les caractéristiques. Les résultats ont montré la nécessité de polariser les capteurs en champ. Nous avons donc étudié la possibilité de réaliser, grâce à une technique de micromoulage épais, un microsolénoïde 3D et des travaux préliminaires sur l’intégration d'un capteur dans le microsolénoïde par transfert de film ont été effectués. Enfin, une étude théorique a été réalisée en tenant compte des résultats obtenus expérimentalement. Pour cela, le modèle de Landau-Lifshitz-Gilbert (LLG) a été implanté dans un code de calcul électromagnétique par éléments finis permettant de calculer l’impédance du capteur en fonction du champ magnétique appliqué. / The capability to detect micro-defects or buried flaws in the metallic parts is an important issue for the aerospace or nuclear industry. The technique of nondestructive testing (NDT) by eddy current is widely used for these applications. This thesis is part of collaboration project aimed at the realization and integration of magnetic field microsensors based on the magneto-impedance (MI) effect for the NDT detection systems. These multilayered structure microsensors (ferromagnetic/conductor/ferromagnetic) were realized in the clean room by thin film deposition method. A post-annealing step with magnetic field was then used to optimize the material properties and to induce magnetic anisotropy in the ferromagnetic layers. A method based on the double amplitude demodulation was proposed for the dynamic characterization of the sensors. The important parameters such as the geometry, the anisotropy and the driven frequency were studied in order to optimize the characteristics. The results showed that a bias field is necessary for the application. Therefore, we have investigated the possibility to realize, through thick micromoulding technique, a 3D microsolenoid and preliminary work on integrating a sensor in the microsolenoid by film transfer has been carried out. Finally, a theoretical study was investigated by taking into account the results obtained experimentally. For this purpose, the model of Landau-Lifshitz-Gilbert (LLG) has been implemented in an electromagnetic finite element calculation program in order to determine the impedance of the sensor as a function of the applied magnetic field.
|
5 |
Couches minces en Fe-N élaborées par implantation ionique : propriétés structurales et magnétiques / Fe-N thin films made by ion implantation : structural and magnetic propertiesGarnier, Louis-Charles 06 May 2019 (has links)
Les phases alpha'-Fe8N1-x et alpha''-Fe16N2 ont un fort potentiel d’application, en raison de leur anisotropie magnétocristalline uniaxiale et de leur grande aimantation à saturation. Cependant, les valeurs annoncées pour ces propriétés magnétiques restent sujettes à discussion. Les recherches menées au cours de cette thèse de doctorat ont été initiées dans le but de clarifier cette situation. L’élaboration des échantillons a principalement consisté en l’implantation ionique d’azote dans des couches minces de fer alpha épitaxiées sur ZnSe/GaAs (001). Entre autres, les effets de la température de la cible et de la fluence sur la structure cristalline des échantillons ont été analysés par diffractométrie des rayons X. La présence d’une anisotropie magnétique perpendiculaire a été mise en évidence dans les couches minces contenant les phases alpha'-Fe8N1-x ou alpha''-Fe16N2. La constante d’anisotropie a été évaluée par magnétométrie à échantillon vibrant et résonance ferromagnétique. À l’occasion de ces recherches, des domaines en rubans faibles ont été observés par microscopie à force magnétique dans certaines couches minces en Fe-N. Ceux-ci sont particulièrement rectilignes et des dislocations coin se trouvent au sein de leur structure périodique. Des études ont alors été réalisées dans le but de contrôler avec précision la réorientation des domaines en rubans et le déplacement des dislocations magnétiques, à l’aide d’un champ magnétique. / The alpha'-Fe8N1-x and alpha''-Fe16N2 phases have a high potential of application, because of their uniaxial magnetocrystalline anisotropy and their large saturation magnetization. However, the values announced for these magnetic properties remain a subject of discussion. The research conducted during this PhD thesis was initiated in order to clarify this situation. Sample making consisted mainly of nitrogen ion implantation into alpha-Fe thin films, epitaxially grown on ZnSe/GaAs (001). Among others, the effects of target temperature and fluence on the crystal structure of the samples were analyzed by X-ray diffractometry. The presence of a perpendicular magnetic anisotropy was demonstrated in the thin films containing the alpha'-Fe8N1-x and alpha''-Fe16N2 phases. The anisotropy constant was evaluated by vibrating sample magnetometry and ferromagnetic resonance. In this research, weak stripe domains were observed by magnetic force microscopy in some Fe-N thin films. These are particularly straight and edge dislocations are found within their periodic structure. Studies were then carried out to precisely control the reorientation of the stripe domains and the displacement of the magnetic dislocations, using a magnetic field.
|
6 |
Investigations Of Magnetic Anisotropy In Ferromagnetic Thin Films And Its ApplicationsSakshath, S 07 1900 (has links) (PDF)
Physical systems having dimensions smaller than, or of the same order of magnitude as, the characteristic length scale relevant to a physical property are referred to as mesoscopic physical systems. Due to the dimensions of the system, several physical properties get affected and this could reveal interesting physics which would other-wise have not been apparent. In the recent times, a lot interesting applications have resulted from such studies.
The fundamental length scale in ferromagnetic systems is the exchange length. It is related to the magnetic anisotropy and exchange constants. Other length scales such as the size of a magnetic domain or a domain wall depends on the minimisation of energy associated with this length scale along with other factors such as zeeman energy, magnetostatic, magnetoelastic and anisotropy energies.
Ultrathin magnetic films have thickness smaller than the exchange length. In this thickness regime, the surface of the film plays an important role. The magnetic anisotropy energy would get a significant contribution from the surface of the film and if it dominates over the volume contribution, would eventually lead to magnetisation pointing out of the plane of the film as opposed to imposition of demagnetising fields. Examples for such cases are FePt(L10 phase) films and Co(0001) films. Such films are important in memory applications where perpendicularly magnetised recording media are desired. When the lateral dimensions of thin films are reduced, demagnetising fields become even more important. Depending on the anisotropy in the system, certain domain patterns get stabilised in the final structure. This has led to important applications in the field of magnonics. The use of angular momentum transfer from spin polarised electrons to change the configuration of magnetisation of structured magnetic films has led to interesting memory and oscillator applications. The underlying physical parameter that needs to be controlled and carefully studied in all these cases is the magnetic anisotropy. It is favourable to have uniaxial magnetic anisotropy for memory and oscillators. This thesis chiefly deals with Fe/GaAs(001) systems. The choice of the physical system follows interest in spintronics where spin injection is desired into a semiconductor from a ferromagnet. The thesis is organized into chapters as follows.
Chapter 1 attempts to introduce the reader to some of the basic concepts of mag-netism and some magnetic phenomena. The characteristic nature of a ferro-magnetic material is its spontaneous magnetisation due to long range ordering below the Curie temperature. But the moment is coupled, through some in-teractions, to spatial co-ordinates which leads to spatial variation of magnetic properties. Such interactions are also responsible for the formation of magnetic domains. The spatial variation of magnetic properties within a ferromagnet is called magnetic anisotropy. A major part of the thesis deals with the study of magnetic anisotropy of Fe thin films grown on GaAs(001) substrates. For a better understanding, the structure of the semiconductor is introduced first before discussing the influence of the structure of GaAs on the growth of Fe. A short description of the uniaxial magnetic anisotropy in Fe films is given before starting on an exploration of some possible reasons for it. Concepts of ferromagnetic resonance, spin torque effect and micromagnetic simulations are given.
Chapter 2 gives a brief description of some of the experimental apparatus that was setup during the course of the research along with an overview of the differ-ent sample preparation and characterisation techniques used. The chapter is organised according to the general functionality of the techniques. Some con-cepts such as the use of low energy electrons, nanostructuring etc are introduced along with the corresponding techniques since it is best understood along with the instrumentation.
Chapter 3 reports some surprising findings about the in-plane magnetic anisotropy in Fe films grown on an MgO underlayer. Until now, it has been understood that such films should exhibit only a four-fold magnetic anisotropy within the plane of the film. But the Fe/MgO/GaAs(001) films studied here exhibited an in-plane uniaxial magnetic anisotropy(IPUMA). IPUMA is dominant upto about 25 ML of Fe in case of Fe/MgO/GaAs(001) films whereas, in Fe/GaAs(001) films it is dominant only upto about 15 ML. Thus, the presence of the MgO film even appeared to enhance the uniaxial anisotropy as compared to the Fe/GaAs(001) films. In the ferromagnetic resonance (FMR) spectra, as many as three peaks were observed in Fe/GaAs(001) films of thickness 50 ML close to the hard axis of magnetisation. This means that three could be three energy minima possibly due to a competition between the anisotropies involved.
Chapter 4 elaborates the investigations of the effect of orientation and doping con-centration of the GaAs substrate on the magnetic anisotropy of Fe/GaAs(001) films. It is found that doping the substrate (n type) reduces the strength of the IPUMA in Fe/GaAs films. In the wake of the long-standing debate of electronic structure v/s stress as the origin of the IPUMA in Ferromagnet/Semiconductor films, this result is important because it implies that the electronic structure of the Fe/GaAs interface influences the magnetic anisotropy. But stress, as a cause of IPUMA cannot be ruled out. The influence of deposition techniques on magnetic anisotropy is also investigated.
Chapter 5 presents a way of manipulating magnetic anisotropy, and hence mag-netisation dynamics, by nanostructuring of epitaxial Fe films. It is based on the property that magnetic anisotropy of Fe films is thickness dependent. It is demonstrated that using techniques of nanostructuring, a 2 dimensional mag-netic system with controllable variation of local magnetic anisotropy is created. Such a system could be a potential magnonic crystal.
chapter 6 demonstrates the proof of concept of a new memory device where memory is stored in the magnetic domain configuration of a ring in relation to that of a nano-wire. Switching between the memory states is acheived through spin trasfer torque of an electric current passing through the device, whereas read-out of the memory state is through the measurement of resistance of the device. Devices are made using NiFe and Co; it is seen that the behaviour of the devices can be explained taking into account the anisotropic magnetoresistance of the material used.
Finally, the various results are summarised and a broad outlook is given. Some possible future research related to the topics dealt within this thesis is discussed.
|
7 |
Ferromagnetic thin films of Fe and Fe 3 Si on low-symmetric GaAs(113)A substratesMuduli, Pranaba Kishor 24 April 2006 (has links)
In dieser Arbeit werden das Wachstum mittels Molekularstrahlepitaxie und die Eigenschaften der Ferromagneten Fe und Fe_3Si auf niedrig-symmetirschen GaAs(113)A-Substraten studiert. Drei wichtige Aspekte werden untersucht: (i) Wachstum und strukturelle Charakterisierung, (ii) magnetische Eigenschaften und (iii) Magnetotransporteigenschaften der Fe und Fe_3Si Schichten auf GaAs(113)A-Substraten. Das Wachstum der Fe- und Fe_3Si-Schichten wurde bei einer Wachstumstemperatur von = bzw. 250 °C optimiert. Bei diesen Wachstumstemperaturen zeigen die Schichten eine hohe Kristallperfektion und glatte Grenz- und Oberflächen analog zu [001]-orientierten Schichten. Weiterhin wurde die Stabilität der Fe_(3+x)Si_(1-x) Phase über einen weiten Kompositionsbereich innerhalb der Fe_3Si-Stoichiometry demonstriert. Die Abhängigkeit der magnetischen Anisotropie innerhalb der Schichtebene von der Schichtdicke weist zwei Bereiche auf: einen Beresich mit dominanter uniaxialer Anisotropie für Fe-Schichten = 70 MLs. Weiterhin wird eine magnetische Anisotropie senkrecht zur Schichtebene in sehr dünnen Schichten gefunden. Der Grenzflächenbeitrag sowohl der uniaxialen als auch der senkrechten Anisotropiekonstanten, die aus der Dickenabhängigkeit bestimmt wurden, sind unabhängig von der [113]-Orientierung und eine inhärente Eigenschaft der Fe/GaAs-Grenzfläche. Die anisotrope Bindungskonfiguration zwischen den Fe und den As- oder Ga-Atomen an der Grenzfläche wird als Ursache für die uniaxiale magnetische Anisotropie betrachtet. Die magnetische Anisotropie der Fe_3Si-Schichten auf GaAs(113)A-Substraten zeigt ein komplexe Abhängigkeit von der Wachstumsbedingungen und der Komposition der Schichten. In den Magnetotransportuntersuchungen tritt sowohl in Fe(113)- als auch in Fe_3Si(113)-Schichten eine antisymmetrische Komponente (ASC) im planaren Hall-Effekt (PHE) auf. Ein phänomenologisches Modell, dass auf der Kristallsymmetrie basiert, liefert ein gute Beschreibung sowohl der ASC im PHE als auch des symmetrischen, anisotropen Magnetowiderstandes. Das Modell zeigt, dass die beobachtete ASC als Hall-Effekt zweiter Ordnung beschreiben werden kann. / In this work, the molecular-beam epitaxial growth and properties of ferromagnets, namely Fe and Fe_3Si are studied on low-symmetric GaAs(113)A substrates. Three important aspects are investigated: (i) growth and structural characterization, (ii) magnetic properties, and (iii) magnetotransport properties of Fe and Fe_3Si films on GaAs(113)A substrates. The growth of Fe and Fe_3Si films is optimized at growth temperatures of 0 and 250 degree Celsius, respectively, where the layers exhibit high crystal quality and a smooth interface/surface similar to the [001]-oriented films. The stability of Fe_(3+x)Si_(1-x) phase over a range of composition around the Fe_3Si stoichiometry is also demonstrated. The evolution of the in-plane magnetic anisotropy with film thickness exhibits two regions: a uniaxial magnetic anisotropy (UMA) for Fe film thicknesses = 70 MLs. The existence of an out-of-plane perpendicular magnetic anisotropy is also detected in ultrathin Fe films. The interfacial contribution of both the uniaxial and the perpendicular anisotropy constants, derived from the thickness-dependent study, are found to be independent of the [113] orientation and are hence an inherent property of the Fe/GaAs interface. The origin of the UMA is attributed to anisotropic bonding between Fe and As or Ga at the interface, similarly to Fe/GaAs(001). The magnetic anisotropy in Fe_3Si on GaAs(113)A exhibits a complex dependence on the growth conditions and composition. Magnetotransport measurements of both Fe(113) and Fe_3Si(113) films shows the striking appearance of an antisymmetric component (ASC) in the planar Hall effect (PHE). A phenomenological model based on the symmetry of the crystal provides a good explanation to both the ASC in the PHE as well as the symmetric anisotropic magnetoresistance. The model shows that the observed ASC component can be ascribed to a second-order Hall effect.
|
Page generated in 0.125 seconds