Properties of magnetic thin film devices cannot be understood without detailed knowledge of their structure. For this purpose, a variety of thin film and multilayer systems have been studied. Both reciprocal space (low energy electron diffraction, reflection high energy electron diffraction, X-ray diffraction and reflectometry) and direct space (transmission electron microscopy) as well as Rutherford backscattering spectrometry have been applied. To gain understanding of an oxidation procedure for the growth of magnetite layers, thermal stability of iron layers on molybdenum seed layers has been investigated. Following the mosaicity and the out-of-plane coherence length over different ratios between the constituting layers allowed a deeper understanding of the limits of metallic superlattices. This, together with an approach to use hydrogen in the process gas during magnetron sputter epitaxy, opens routes for the growth of metallic superlattices of superior quality. A non-isostructural multilayer/superlattice system, Fe/MgO, has been investigated. In turn, this gave more understanding how superlattice diffraction patterns are suppressed by strain fields. As an alternative route to single-crystalline superlattices, amorphous multilayers present interesting opportunities. In this context, crystallization effects of iron/zirconium layers on alumiunium oxide were studied. Understanding these effects enables significant improvement in the quality of amorphous multilayers, and allows avoiding these, growing truly amorphous layers. Both the substantial improvement in quality of metallic superlattices, approaching true single-crystallinity, as well as the improvements in the growth of amorphous multilayers give rise to opportunities in the field of magnetic coupling and superconducting spin valves.

Organic solar cells offer attractive properties for novel applications and continuous advances in material and concept development have led to significant improvements in device performance. To exploit their full potential (roll-to-roll production of flexible and top-illuminated devices, using e.g. opaque metal foil or textile as substrate), highly transparent, conductive, mechanically flexible, and cost-efficient top electrodes are of great importance. The current standard material indium tin oxide (ITO) is rigid, expensive and requires a high energy / high temperature deposition process, limiting ITO (and other transparent conductive oxides) to bottom electrode applications. This work presents fundamental investigations to understand and control the properties of transparent conductors and documents four different approaches to prepare transparent electrodes on top of efficient small molecule organic solar cells, with the aim to replace ITO. Fullerene C60 layers are investigated as completely carbon-based electrodes. For an optimized doping concentration, sheet resistance and transmittance are improved and efficient solar cells are realized. Since the lateral charge transport is still limited, a combination with a microstructured conductor is suggested. Pulsed laser deposition allows for the first time a damage-free preparation of gallium doped zinc oxide (ZnO:Ga) layers on top of organic devices by careful optimization of the deposition atmosphere. ZnO:Ga electrodes with a transmittance of Tvis = 82.7 % and sheet resistance Rs = 83 Ohm/sq are obtained. The formation of local shunts due to ZnO:Ga droplets is identified and then prevented by a shadow mask between the target and the sample, enabling solar cells with similar efficiency (2.9 %) compared to a reference device using a state-of-the-art metal top contact. Another very promising alternative are intrinsically flexible, ultra-thin silver layers. By introducing an oxide interlayer, the adverse interpenetration of silver and organic materials is prevented and the charge extraction from the solar cells is improved. With a second oxide layer on top, the silver electrode is significantly stabilized, leading to an increased solar cell lifetime of 4500 h (factor of 107). Scanning electron micrographs of Ag thin films reveal a poor wetting on organic and oxide substrates, which strongly limits the electrode performance. However, it is significantly improved by a 1 nm thin seed layer. An optimized Au/Ag film reaches Tvis = 78.1 % and Rs = 19 Ohm/sq, superior to ITO. Finally, silver electrodes blended with calcium show a unique microstructure which enables unusually high transmittance (84.3 % at 27.3 Ohm/sq) even above the expectations from bulk material properties and thin film optics. Such values have not been reached for transparent electrodes on top of organic material so far. Solar cells with a Ca:Ag top electrode achieve an efficiency of 7.2 %, which exceeds the 6.9 % of bottom-illuminated reference cells with conventional ITO electrodes and defines a new world record for top-illuminated organic solar cells. With these electrodes, semi-transparent and large-area devices, as well as devices on opaque and flexible substrates are successfully prepared. In summary, it is shown that ZnO:Ga and thin metal electrodes can replace ITO and fill the lack of high performance top electrodes. Moreover, the introduced concepts are not restricted to specific solar cell architectures or organic compounds but are widely applicable for a variety of organic devices.

This thesis addresses the metal nanocluster growth process on prepatterned substrates, the development of atomistic simulation method with respect to an acceleration of the atomistic transition states, and the continuum model of the ion-beam inducing semiconductor surface pattern formation mechanism. Experimentally, highly ordered Ag nanocluster structures have been grown on pre-patterned amorphous SiO2 surfaces by oblique angle physical vapor deposition at room temperature. Despite the small undulation of the rippled surface, the stripe-like Ag nanoclusters are very pronounced, reproducible and well-separated. The first topic is the investigation of this growth process with a continuum theoretical approach to the surface gas condensation as well as an atomistic cluster growth model. The atomistic simulation model is a lattice-based kinetic Monte-Carlo (KMC) method using a combination of a simplified inter-atomic potential and experimental transition barriers taken from the literature. An effective transition event classification method is introduced which allows a boost factor of several thousand compared to a traditional KMC approach, thus allowing experimental time scales to be modeled. The simulation predicts a low sticking probability for the arriving atoms, millisecond order lifetimes for single Ag monomers and about 1 nm square surface migration ranges of Ag monomers. The simulations give excellent reproduction of the experimentally observed nanocluster growth patterns. The second topic specifies the acceleration scheme utilized in the metallic cluster growth model. Concerning the atomistic movements, a classical harmonic transition state theory is considered and applied in discrete lattice cells with hierarchical transition levels. The model results in an effective reduction of KMC simulation steps by utilizing a classification scheme of transition levels for thermally activated atomistic diffusion processes. Thermally activated atomistic movements are considered as local transition events constrained in potential energy wells over certain local time periods. These processes are represented by Markov chains of multi-dimensional Boolean valued functions in three dimensional lattice space. The events inhibited by the barriers under a certain level are regarded as thermal fluctuations of the canonical ensemble and accepted freely. Consequently, the fluctuating system evolution process is implemented as a Markov chain of equivalence class objects. It is shown that the process can be characterized by the acceptance of metastable local transitions. The method is applied to a problem of Au and Ag cluster growth on a rippled surface. The simulation predicts the existence of a morphology dependent transition time limit from a local metastable to stable state for subsequent cluster growth by accretion. The third topic is the formation of ripple structures on ion bombarded semiconductor surfaces treated in the first topic as the prepatterned substrate of the metallic deposition. This intriguing phenomenon has been known since the 1960s and various theoretical approaches have been explored. These previous models are discussed and a new non-linear model is formulated, based on the local atomic flow and associated density change in the near surface region. Within this framework ripple structures are shown to form without the necessity to invoke surface diffusion or large sputtering as important mechanisms. The model can also be extended to the case where sputtering is important and it is shown that in this case, certain "magic" angles can occur at which the ripple patterns are most clearly defined. The results including some analytic solutions of the nonlinear equation of motions are in very good agreement with experimental observation.

We report the possibility to control the tilting of nanoneedles and nanowires by using structured sapphire substrates. The advantage of the reported strategy is to obtain well oriented growth along a single direction tilted with respect to the surface normal, whereas the growth in other directions is suppressed. In our particular case, the nanostructures are tilted with respect to the surface normal by an angle of 58°. Moreover, we demonstrate that variation of the nanostructures shape from nanoneedles to cylindrical nanowires by using SiO2 layer is observed.

Organic solar cells offer attractive properties for novel applications and continuous advances in material and concept development have led to significant improvements in device performance. To exploit their full potential (roll-to-roll production of flexible and top-illuminated devices, using e.g. opaque metal foil or textile as substrate), highly transparent, conductive, mechanically flexible, and cost-efficient top electrodes are of great importance. The current standard material indium tin oxide (ITO) is rigid, expensive and requires a high energy / high temperature deposition process, limiting ITO (and other transparent conductive oxides) to bottom electrode applications. This work presents fundamental investigations to understand and control the properties of transparent conductors and documents four different approaches to prepare transparent electrodes on top of efficient small molecule organic solar cells, with the aim to replace ITO. Fullerene C60 layers are investigated as completely carbon-based electrodes. For an optimized doping concentration, sheet resistance and transmittance are improved and efficient solar cells are realized. Since the lateral charge transport is still limited, a combination with a microstructured conductor is suggested. Pulsed laser deposition allows for the first time a damage-free preparation of gallium doped zinc oxide (ZnO:Ga) layers on top of organic devices by careful optimization of the deposition atmosphere. ZnO:Ga electrodes with a transmittance of Tvis = 82.7 % and sheet resistance Rs = 83 Ohm/sq are obtained. The formation of local shunts due to ZnO:Ga droplets is identified and then prevented by a shadow mask between the target and the sample, enabling solar cells with similar efficiency (2.9 %) compared to a reference device using a state-of-the-art metal top contact. Another very promising alternative are intrinsically flexible, ultra-thin silver layers. By introducing an oxide interlayer, the adverse interpenetration of silver and organic materials is prevented and the charge extraction from the solar cells is improved. With a second oxide layer on top, the silver electrode is significantly stabilized, leading to an increased solar cell lifetime of 4500 h (factor of 107). Scanning electron micrographs of Ag thin films reveal a poor wetting on organic and oxide substrates, which strongly limits the electrode performance. However, it is significantly improved by a 1 nm thin seed layer. An optimized Au/Ag film reaches Tvis = 78.1 % and Rs = 19 Ohm/sq, superior to ITO. Finally, silver electrodes blended with calcium show a unique microstructure which enables unusually high transmittance (84.3 % at 27.3 Ohm/sq) even above the expectations from bulk material properties and thin film optics. Such values have not been reached for transparent electrodes on top of organic material so far. Solar cells with a Ca:Ag top electrode achieve an efficiency of 7.2 %, which exceeds the 6.9 % of bottom-illuminated reference cells with conventional ITO electrodes and defines a new world record for top-illuminated organic solar cells. With these electrodes, semi-transparent and large-area devices, as well as devices on opaque and flexible substrates are successfully prepared. In summary, it is shown that ZnO:Ga and thin metal electrodes can replace ITO and fill the lack of high performance top electrodes. Moreover, the introduced concepts are not restricted to specific solar cell architectures or organic compounds but are widely applicable for a variety of organic devices.

This thesis addresses the metal nanocluster growth process on prepatterned substrates, the development of atomistic simulation method with respect to an acceleration of the atomistic transition states, and the continuum model of the ion-beam inducing semiconductor surface pattern formation mechanism. Experimentally, highly ordered Ag nanocluster structures have been grown on pre-patterned amorphous SiO2 surfaces by oblique angle physical vapor deposition at room temperature. Despite the small undulation of the rippled surface, the stripe-like Ag nanoclusters are very pronounced, reproducible and well-separated. The first topic is the investigation of this growth process with a continuum theoretical approach to the surface gas condensation as well as an atomistic cluster growth model. The atomistic simulation model is a lattice-based kinetic Monte-Carlo (KMC) method using a combination of a simplified inter-atomic potential and experimental transition barriers taken from the literature. An effective transition event classification method is introduced which allows a boost factor of several thousand compared to a traditional KMC approach, thus allowing experimental time scales to be modeled. The simulation predicts a low sticking probability for the arriving atoms, millisecond order lifetimes for single Ag monomers and about 1 nm square surface migration ranges of Ag monomers. The simulations give excellent reproduction of the experimentally observed nanocluster growth patterns. The second topic specifies the acceleration scheme utilized in the metallic cluster growth model. Concerning the atomistic movements, a classical harmonic transition state theory is considered and applied in discrete lattice cells with hierarchical transition levels. The model results in an effective reduction of KMC simulation steps by utilizing a classification scheme of transition levels for thermally activated atomistic diffusion processes. Thermally activated atomistic movements are considered as local transition events constrained in potential energy wells over certain local time periods. These processes are represented by Markov chains of multi-dimensional Boolean valued functions in three dimensional lattice space. The events inhibited by the barriers under a certain level are regarded as thermal fluctuations of the canonical ensemble and accepted freely. Consequently, the fluctuating system evolution process is implemented as a Markov chain of equivalence class objects. It is shown that the process can be characterized by the acceptance of metastable local transitions. The method is applied to a problem of Au and Ag cluster growth on a rippled surface. The simulation predicts the existence of a morphology dependent transition time limit from a local metastable to stable state for subsequent cluster growth by accretion. The third topic is the formation of ripple structures on ion bombarded semiconductor surfaces treated in the first topic as the prepatterned substrate of the metallic deposition. This intriguing phenomenon has been known since the 1960s and various theoretical approaches have been explored. These previous models are discussed and a new non-linear model is formulated, based on the local atomic flow and associated density change in the near surface region. Within this framework ripple structures are shown to form without the necessity to invoke surface diffusion or large sputtering as important mechanisms. The model can also be extended to the case where sputtering is important and it is shown that in this case, certain "magic" angles can occur at which the ripple patterns are most clearly defined. The results including some analytic solutions of the nonlinear equation of motions are in very good agreement with experimental observation.:1 Introduction: Atomistic Models 1 1.1 Density Functional Theory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1.1.1 Schroedinger equation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1.1.2 Density functional theory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1.2 Molecular Dynamics Simulation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 1.2.1 Lagrangian mechanics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 1.2.2 MD algorithms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 1.3 Lattice Monte Carlo simulation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 1.3.1 Thermodynamic variables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 1.3.2 Metropolis Algorithm and limit theorem . . . . . . . . . . . . . . . . . . . . . 15 1.3.3 Kinetic Monte Carlo Simulation . . . . . . . . . . . . . . . . . . . . . . . . . 18 1.3.4 Imaginary time reaction diffusion . . . . . . . . . . . . . . . . . . . . . . . . . 24 2 Cluster Growth on Pre-patterned Surfaces 29 2.1 Nanocluster growth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 2.1.1 Classical nucleation theory . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 2.1.2 Cluster growth on substrates . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 2.1.3 Experimental motivation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 2.2 Local flux and surface ad-monomer diffusion . . . . . . . . . . . . . . . . . . . . . . 35 2.2.1 Surface topography and local flux . . . . . . . . . . . . . . . . . . . . . . . . 35 2.2.2 Surface gas diffusion under inhomogeneous flux . . . . . . . . . . . . . . . . . 37 2.2.3 Surface migration of ad-monomers . . . . . . . . . . . . . . . . . . . . . . . . 40 2.2.4 Simulation vs. experimental gauge . . . . . . . . . . . . . . . . . . . . . . . . 45 2.3 Nucleation models: Surface gas condensation . . . . . . . . . . . . . . . . . . . . . . 46 2.3.1 Simulation setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 2.3.2 Simulation parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 2.3.3 Evolution of sticking probability . . . . . . . . . . . . . . . . . . . . . . . . . 49 2.3.4 Evolution of Ag cluster growth . . . . . . . . . . . . . . . . . . . . . . . . . . 54 2.3.5 Simulation time and system evolution . . . . . . . . . . . . . . . . . . . . . . 57 2.4 Extended cluster growth model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 2.4.1 Modified setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 2.4.2 Simulation result . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 2.4.3 Comparison with experiment . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 2.5 Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 3 A Markov chain model of transition states 63 3.1 Acceleration of thin film growth simulation . . . . . . . . . . . . . . . . . . . . . . . 63 3.2 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 3.3 Transition states of Markov chains . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 3.3.1 Local transition events . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 3.3.2 The Monte-Carlo method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 3.4 Effective transitions of objects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 3.4.1 Convergence of the local fluctuation . . . . . . . . . . . . . . . . . . . . . . . 67 3.4.2 The importance of individual local transitions . . . . . . . . . . . . . . . . . . 68 3.4.3 The modified algorithm for effective transition states . . . . . . . . . . . . . . 69 3.5 Cluster growth simulation models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 3.5.1 The configuration energy and migration barriers . . . . . . . . . . . . . . . . 72 3.5.2 Transition events . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 3.5.3 Comparison with Experiment . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 3.5.4 Cluster growth stability evaluation . . . . . . . . . . . . . . . . . . . . . . . . 78 3.6 Stability of modified convergence limit . . . . . . . . . . . . . . . . . . . . . . . . . . 80 3.6.1 Acceleration of convergence to Gibbs field . . . . . . . . . . . . . . . . . . . . 80 3.6.2 Relative convergence speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 3.6.3 1D Ag models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 3.6.4 Stability theorem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 3.7 Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 4 Ion beam inducing surface pattern formation 89 4.1 Ion-inducing pattern formation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 4.1.1 Bradley-Harper equation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 4.1.2 Nonlinear continuum models . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 4.1.3 Other approaches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 4.2 Simulation of surface defects induced by ion beams . . . . . . . . . . . . . . . . . . . 94 4.2.1 MD simulation of single ion impact . . . . . . . . . . . . . . . . . . . . . . . . 94 4.2.2 Monte-Carlo simulations of surface modification . . . . . . . . . . . . . . . . 96 4.2.3 Curvature dependent surface diffusion . . . . . . . . . . . . . . . . . . . . . . 102 4.3 Continuum model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 4.3.1 Equation of motion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 4.3.2 A travelling wave solution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108 4.3.3 Lyapunov stability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109 4.3.4 Comparison with experiment . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 4.3.5 Approximate solutions for other angles . . . . . . . . . . . . . . . . . . . . . . 110 4.4 Contribution of other effects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111 4.4.1 Surface diffusion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111 4.4.2 Surface Sputtering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113 4.5 Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116 5 Summary 119 Appendix 123 A The discrete reaction diffusion equation . . . . . . . . . . . . . . . . . . . . . . . . . 123 B The derivation of the solution (2.20) . . . . . . . . . . . . . . . . . . . . . . . . . . . 124 C Contribution of overlapping migration area . . . . . . . . . . . . . . . . . . . . . . . 125 D The RGL potential . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126 E Stability of the traveling wave solution . . . . . . . . . . . . . . . . . . . . . . . . . . 127

The role of sensor technology is obvious in improvement and optimization of many industrial processes. The sensor films, which are considered the core of chemical sensors, have the capability to detect the presence and concentration of a specific chemical substance. Such sensor films achieve selectivity by detecting the interaction of the specific chemical substance with the sensor material through selective binding, adsorption and permeation of analyte. This research focuses on development and verification of a comprehensive mathematical model of mixed metal oxide thin film growth using spray pyrolysis technique (SPT). An experimental setup is used to synthesize mixed metal oxide films on a heated substrate. The films are analyzed using a variety of characterization tools. The results are used to validate the mathematical model. There are three main stages to achieve this goal: 1) A Lagrangian-Eulerian method is applied to develop a CFD model of atomizing multi-component solution. The model predicts droplet characteristics in flight, such as spatial distribution of droplet size and concentration. 2) Upon reaching the droplets on the substrate, a mathematical model of multi-phase transport and chemical reaction phenomena in a single droplet is developed and used to predict the deposition of thin film. The various stages of droplet morphology associated with surface energy and evaporation are predicted. 3) The processed films are characterized for morphology and chemical composition (SEM, XPS) and the data are used to validate the models as well as investigate the influence of process parameters on the structural characteristics of mixed metal oxide films. The structural characteristics are investigated of nano structured thin films comprising of ZnO, SnO2, ZnO+In2O3 and SnO2+In2O3 composites. The model adequately predicts the size distribution and film thickness when the nanocrystals are well-structured at the controlled temperature and concentration.

Zentrales Thema dieser Dissertation ist die Untersuchung anorganisch/organischer Hybridsysteme (HIOS) mit besonderem Fokus auf den speziellen Prozessen an der Grenzfläche beider Materialklassen. Organische Moleküle, in Verbindung mit anorganischen Halbleitern haben ein großes Potenzial für Anwendungen in zukünftigen optoelektronischen Hybridbauteilen, indem sie Vorteile zweier unterschiedlicher Welten kombinieren. Entscheidend für die Herstellung von hybriden Strukturen ist das Verständnis der Wechselwirkungen an der Grenzfläche zwischen organischem und anorganischem Material. In dieser Arbeit werden diese Wechselwirkungen analysiert, um eine Wachstumskontrolle an der Grenzfläche zwischen konjugierten organischen Molekül und anorganischem Halbleiter zu ermöglichen. Hierfür werden unterschiedliche Ansätze verfolgt: Im ersten Teil der Arbeit wird die Wechselwirkung des Modellsystems Sexiphenyl (6P) an der Grenzfläche zu ZnO untersucht, sowie das Wachstum des Moleküls mittels verschiedener Methoden kontrolliert. Das daraus gewonnene Wissen kann im zweiten Teil dazu verwendet werden einen hybriden ZnO/6P/ZnO-Stapel zu realisieren, bei dem die organische Schicht ohne Beeinträchtigung der Kristallstruktur, mit definierten Grenzflächen bis hin zur atomaren/molekularen Ebene, überwachsen werden kann. Der letzte Teil der Arbeit befasst sich mit der optischen Echtzeit-Beobachtung während des organischen Wachstums verschiedener Moleküle. Dadurch ist es möglich Veränderungen von Struktureigenschaften und Wechselwirkungen zwischen Molekülen und dem Substrat zerstörungsfrei zu bestimmen, während diese aufgewachsen werden. Hierdurch können schlussendlich mögliche Mechanismen aufgezeigt werden, um elektronische und optische Wechselwirkung an der Grenzfläche zwischen organischem Molekül und anorganischen Halbleitern zu analysieren, sowie Wachstumsprozesse weiter zu verstehen und kontrollieren. / The central subject of this thesis are hybrid inorganic/organic systems (HIOS) with a focus on the specific processes at the interface between the two material classes. Organic molecules used together with inorganic semiconductors, have a great potential for future optoelectronic applications in hybrid components, by combining the advantages of two dissimilar worlds. Decisive for the production of hybrid structures is the understanding of the interactions at the interface between organic and inorganic material. In this thesis, the interactions are analyzed to enable growth control at the interface between conjugated organic molecules and inorganic semiconductors. In the first part of the thesis, the interaction of the model system sexiphenyl (6P) at the interface with ZnO, as well as approaches to control the growth of the molecule are being investigated. The knowledge gained here is used in the second part to realize a hybrid ZnO/6P/ ZnO stack, in which the organic layer can be overgrown without affecting the crystal structure, exhibiting defined interfaces down to the atomic/molecular level. The last part of the thesis deals with real time optical observation during organic growth of different molecules. By this changes in structural properties and interactions between molecules and the substrate can be non-destructively determined as they are growing. Ultimately, a comprehensive insight into the optical and electronic interactions at the interface between organic molecules and inorganic semiconductors can be gained and possible control mechanisms are shown.

Aufgrund des weltweiten Trends zur Miniaturisierung, u. a. von elektronischen Bauteilen, von Sensoren, von Speichermedien, oder bei der gezielten Funktionalisierung von Nanopartikeln als Kontrastmittel in bildgebenden medizinischen Verfahren, nimmt die Erforschung von Nanosystemen eine interdisziplinäre Schlüsselrolle ein. Ein grundlegendes physikalisches, chemisches und biologisches Verständnis von Nanosystemen auf Grundlage von experimentellen und theoretischen Untersuchungen steht dabei ebenso im Fokus wie die konzeptionelle Entwicklung geeigneter Nanotechnologien zur kontrollierten Herstellung von Nanostrukturen über „bottom-up“ und „top-down“ Strategien. Getriebene Nanosysteme befinden sich fern vom thermischen Gleichgewicht. Zur ihrer Beschreibung gibt es bisher keine allgemein ausgearbeitete Theorie. Dies hat zur Konsequenz, dass getriebene Nanosysteme problemspezifisch modelliert und untersucht werden müssen. Die vorliegende Schrift ist in drei Themengebiete unterteilt: (i) konzeptionelle Beschreibung stochastischer Fluktuationen der Arbeit und der Wärme im Rahmen der stochastischen Thermodynamik, (ii) konzeptionelle Beschreibung von Vielteilchen-Transportproblemen mit repulsiven Nächste-Nachbarwechselwirkungen auf Grundlage der klassischen zeitabhängigen Dichtefunktionaltheorie und (iii) selbstorganisiertes Wachstum von metallischen und organischen Nanostrukturen.

No description available.