The increased demand for wood and fiber from a continually shrinking land base has resulted in the use of intensively managed forest plantations. The concentration of timber production on the most suitable sites allows the world's demand for forest products to be met on less land and enable native forests to be conserved. Because much of the water flowing in rivers in the U.S. originates as precipitation in forests, there is a justified concern about the impacts of forest management on water quality. Nutrient concentrations were measured in eight streams from October 2002 to September 2011 to assess nutrient response to contemporary forest practices at the Hinkle Creek Paired Watershed Study in the Oregon Cascades. This period of time included a two-year pre-treatment calibration between control and treatment watersheds, a fertilization treatment of both basins in October 2004, and a post-treatment period from 2005 to 2011. A treatment schedule comprised of two temporally explicit harvest entries was used to assess the effects of clearcutting at the non-fish-bearing headwater scale and the fish-bearing watershed scale. Stream water samples were analyzed for nitrogen, phosphorus, calcium, sodium, potassium, magnesium, sulfate, chloride, and silicon as well as specific conductance, pH, and alkalinity. Programmable water samplers were used to take water samples during fall freshets in November 2009 to assess the stream water discharge versus NO₃ + NO₂ concentration relationship. All treatment watersheds showed a statistically significant increase in NO₃ + NO₂ concentrations after clearcutting (p < 0.001). The slope of the streambed through the disturbance was a stronger predictor of the magnitude of the response than was the magnitude of disturbance. Ammonia and organic nitrogen displayed notable increases after harvest treatment, but these increases were attributed to increases in the control watersheds. Phosphorus showed a response to timber harvest in one headwater stream. The remaining nutrients showed a small decrease in the control and treatment watersheds for the period after harvest. There was some evidence to suggest that the addition of urea nitrogen to both basins may have caused an increase in in-stream biota uptake of these nutrients. The storm response results showed that NO₃ + NO₂ concentrations in stream water increase with discharge during small storms that occur after periods of negligible precipitation. Concentrations of NO₃ + NO₂ observed during the calibration period were similar to concentrations observed in an old-growth forest in the H.J. Andrews, suggesting that nutrient processing within the Hinkle Creek watershed had returned to levels that existed prior to its initial harvest sixty years ago. This finding helps to assess long-term impacts of shorter rotation timber harvest of regenerated Douglas-fir stands characteristic of industrialized timber harvest in Oregon. / Graduation date: 2012

Minimising the potential impact of forest management requires an understanding of the key elements that maintain forest diversity and its role in ecological processes. Invertebrates are the most diverse of all biota and play important roles in maintaining forest processes. However, little is known about invertebrates in New Zealand's beech forests or the degree to which selective beech harvest might impact on their diversity and ability to carry out ecosystem processes. Studying ecosystem responses to disturbance is considered vital for understanding how ecosystems are maintained. One of the main objectives of this research was to assess whether litter-dwelling invertebrates were susceptible to the impacts of selective harvest and, if so, whether they could be used as indicators of forest health. Changes in invertebrate diversity could have important implications for nutrient cycling and primary production in forests. Litter-dwelling invertebrates contribute to the process of decomposition by increasing the surface area of the leaves, mixing soil organic matter and by infecting leaf particles with soil microbes. This investigation into the function of invertebrates in beech forest was carried out in the context of ecological theories which relate diversity to ecosystem stability and resilience. A replicated study was established in Maruia State Forest (South Island, New Zealand) to assess the potential biotic and abiotic impacts of sustainable beech harvest. Litter-dwelling invertebrates and environmental factors were monitored during 1997, before harvest, to determine how much variability there was between study sites. Specifically, litter pH, light intensity, litter fall, litter temperature, moisture as well as invertebrate abundance and diversity were compared before and after selective harvest. On 17 January 1998, two to three trees were selectively harvested from three of the nine study sites. On 15 February 1998 a similar number of trees were winched over or felled manually to create artificial windthrow sites. The remaining three undisturbed sites were used as controls. Invertebrates belonging to the detritivore guild were assessed from litter samples and a series of litter-bags containing pre-weighed leaf litter which were placed in each of the sites to assess rates of litter decomposition. Millipedes (Diplopoda: Polyzoniidae, Schedotrigonidae, Dalodesmidae, Habrodesmidae, Sphaerotheridae), earthworms (Oligochaeta: Annelida), tipulid larvae (Diptera: Tipulidae), weevils (Coleoptera: Curculionidae), moth larvae (Lepidoptera: Oecophoridae, Tortricidae and Psychidae), slaters (Isopoda: Styloniscidae), Oribatid mites (Acarina: Cryptostigmata) and landhoppers (Crustacea: Amphipoda) were extracted from the litter-bags and their abundance and diversity was compared between the three treatments. Weight loss from the litter-bags and the carbon and nitrogen content of litter were used to measure the rate of decomposition in each treatment. An additional study investigated whether exclusion of invertebrates from leaf litter resulted in reduced rates of decomposition. The results indicated that there was an increase in light intensity and a small increase in temperature following selective harvest and artificial windthrow. There was no significant difference in litter moisture or the amount of litter fall between the treatments. Invertebrate abundances were significantly affected by season but did not appear to be affected by selective harvest or artificial windthrow. The diversity of invertebrates remained relatively constant throughout the year, as did the rate of decomposition. When invertebrates were excluded from the leaf litter there was no consequential effect on the rate of litter decomposition. This suggests that there may be compensatory mechanisms taking place between the trophic levels of the food web to maintain processes and that direct links between invertebrates and decomposition are relatively weak. In conclusion, it appears that the effects of selective beech harvest on forest-floor processes were minimal and are comparable to those created by natural windthrow disturbance. It also appears that macroclimatic effects such as seasonal climatic effects have a large effect on forest biota. As none of the invertebrates studied appeared to be detrimentally affected by selective harvest and as there was no direct link demonstrated with decomposition, it was considered inappropriate to advocate the use of this group of invertebrates as indicators of sustainable forest management. The results from this study provide information which may help inform decisions on the future management of diversity in beech forest ecosystems.

[Truncated abstract] This ethnoecological study examines land uses by modern Martu Aboriginal people on their country. They occupy very remote settlements—Parnngurr, Punmu and Kunawarritji—in the Great and Little Sandy Deserts. In 1990, their country included Crown Lands and Rudall River National Park. The study investigated the proposition that the knowledge and practices of Martu were of direct relevance to ecosystem processes and national park management. This research commenced in the wider Australian research context of the late 1980s – early 90s when prevailing questions were about the role of customary harvest within contemporary Aboriginal society (Altman 1987; Devitt 1988) and the sustainability of species-specific harvests by Australian indigenous people (Bomford & Caughley 1996). Separately, there was a national line of enquiry into Aboriginal roles in natural resource and protected area management (Williams & Hunn 1986; Birckhead et al. 1992). The field work underpinning this study was done in 1986–1988 and quantitative data collected in 1990 whilst the researcher lived on Martu settlements. Ethnographic information was gathered from informal discussions, semi-structured interviews and participant observation on trips undertaken by Martu. A variety of parameters was recorded for each trip in 1990. On trips accompanied by the researcher, details on the plant and animal species collected were quantified. Martu knowledge and observations of Martu behaviour are interpreted in terms of the variety of land uses conducted and transport strategies including vehicle use; the significance of different species collected; socio-economic features of bush food collection; spatio-temporal patterns of foraging; and, the 'management' of species and lands by Martu. The research found that in 1990, hunting and gathering were major activities within the suite of land uses practiced by Martu. At least 40% of trips from the settlements were principally to hunt. More than 43 animal species and 37 plant food species were reported to be collected during the study; additionally, species were gathered for firewood, medicines and timber artefacts. Customary harvesting persisted because of the need for sustenance, particularly when there were low store supplies, as well as other reasons. The weight of bush meats hunted at least equalled and, occasionally, was three times greater than the weights of store meats available to Parnngurr residents. ... Paradoxically, hunting was a subject of significant difference despite it being the principal activity driving Martu expertise and practice. There is potential for comanagement in the National Park but it remains contingent on many factors between both Martu and DEC as well as external to them. The dissertation suggests practical strategies to enhance co-management.

A redução da cobertura florestal e o uso agrícola intensivo do solo resultam na necessidade de adoção de intervenções de restauração bastante onerosas, o que restringe a expansão dessa atividade e a mitigação dos impactos das atividades humanas na biodiversidade e nos serviços ecossistêmicos. Nesse sentido, a exploração de madeira em florestas em processo de restauração pode ser uma alternativa para a viabilização econômica dessa atividade. Em particular, merece destaque as oportunidades oferecidas pela exploração de espécies arbóreas exóticas de ciclo curto, que antecipam o retorno econômico da restauração e podem auxiliar na amortização dos custos de implantação dos reflorestamentos. No entanto, embora o cultivo intercalado de árvores exóticas seja autorizado pela legislação ambiental como um método de recomposição ambiental, pouco se sabe sobre os efeitos negativos do uso dessas espécies nos modelos de restauração. Nesse contexto, o objetivo deste trabalho foi avaliar o impacto ecológico e silvicultural do uso e colheita de eucalipto consorciado com espécies arbóreas nativas para a restauração da Mata Atlântica. Avaliamos três experimentos implantados nos estados da Bahia e Espírito Santo, os quais adotaram o eucalipto como espécie pioneira comercial, utilizada para gerar renda no primeiro ciclo de corte (em torno de 4 a 5 anos) e ser então removida da floresta em restauração. Em geral, o uso do eucalipto nesses experimentos foi menos prejudicial do que o esperado. Não houve influência negativa do consórcio de eucalipto com espécies nativas, em comparação com plantios exclusivos de espécies nativas, na sobrevivência e crescimento de espécies nativas madeireiras, bem como na regeneração natural de espécies nativas no sub-bosque dos plantios. Nós avaliamos também os impactos da exploração da madeira do eucalipto em dois desses experimentos, onde verificamos que a operação de colheita do eucalipto gera danos nas árvores nativas plantadas e uma abertura significativa do dossel florestal (considerando que o eucalipto representa 50% dos indivíduos plantados e 90% da área basal nos modelos avaliados), porém esses danos já foram parcialmente minimizados em apenas quatorze meses após a colheita. Assim, concluímos que para as condições ambientais avaliadas, o uso do eucalipto em modelos de restauração florestal não prejudicou o desenvolvimento das árvores de espécies nativas plantadas em consórcio e não prejudicou a expressão da regeneração natural, o que torna seu uso válido para essas condições. Mais estudos são necessários, no entanto, para que se acompanhe as trajetórias sucessionais de modelos de restauração florestal a médio e longo prazo, a fim de validar a recomendação do seu uso a partir de bases científicas mais consolidadas. / The reduction of forest cover and the intensive agricultural use of the soil result in the necessity of adopting expensive restoration interventions, which restrict the expansion of this activity and the mitigation of the impacts of human activities on biodiversity and ecosystem services. Thus, the exploitation of wood in restoration forests may be an alternative for the economic viability of this activity. Particularly noteworthy are the opportunities offered by the exploitation of short rotation exotic tree species, which anticipate the profit obtained from restoration and may contribute to the amortization of implantation costs. However, even though the intercropping with exotic trees is authorized by the current environmental legislation as a method for forest restoration, little is known concerning the possible negative effects of the use of these species in restoration models. This research aimed to evaluate the ecological and silvicultural impacts of the use and harvest of Eucalyptus temporarily mixed with native tree species in the restoration of the Atlantic Forest. We evaluated three experiments in the states of Bahia and Espírito Santo, which used Eucalyptus as a commercial pioneer species to generate income after the first rotation (around 4-5 years) and then removed from the system. Eucalyptus had no negative influence over native species\' survival and growth when compared to pure native species plantations, as well as over natural regeneration of native species in the understory. We also evaluated the impacts of harvesting Eucalyptus in two of these three experiments and found that the Eucalyptus harvesting operation causes significant damage to planted native trees and results in opening of the forest canopy (considering that Eucalyptus represents 50% of the individuals planted and 90% of the basal area), but these damages were partially minimized within only 14 months after harvesting. Thus, we conclude that for the environmental conditions evaluated, the mixture with Eucalyptus in this alternative forest restoration approach did not affect the development of native tree species neither the expression of natural regeneration, which makes its use valuable. Further studies are necessary, however, to follow the succession trajectories of forest restoration models in the medium and long runs, to validate the recommendation of their use with more consolidated scientific basis.

Neuer WWW-Server Metacomputing - neue Aufgabenverteilung im Netz Harvest Secure Shell Nutzung der WS-Pools SW-Umgebung Parsytec URZ auf der CeBit Software-News Dienste des URZ - Ueberblick

No description available.

Indiana University-Purdue University Indianapolis (IUPUI) / By start of the 1920s, the United States had seen nearly forty years of vast accumulations of wealth by a small group of people, substantial financial speculation and a mass change in the economic base from agricultural to industrial. All of this ended in 1929 in a crushing depression that spread not only across the country, but also around the world. Hard-Boiled detective fiction first reached the reading public early in the decade initially as adventure stories, but quickly became a way for authors to express the stresses these changes were causing on people and society. The detective is the center of the story with the task of reestablishing a certain degree of order or redemption. An important character hallmark of this genre is that he is seldom able to do this, or that the cost is so high a terrible burden remains. His decisions and judgments in this attempt are formed by his relationship with the people or community around him. The goal of this thesis is to look at the issues raised in the context of how the detective relates to a person or community in the story. For analysis, six books were chosen arranged from least level of personal relationship by the detective to the most intimate. The books are Red Harvest, by Dashiell Hammett, The Big Sleep, by Raymond Chandler, The Galton Case, by Ross MacDonald, Cotton Comes to Harlem, by Chester Himes, Devil in a Blue Dress, by Walter Mosley, and I, the Jury, by Mickey Spillane. In the study of these books, a wide range of topics are presented including political ideologies, corruption, racial discrimination and family strife. Each book provided a wealth of views on these and other subjects that are as relevant today as when they were written.

Recently, there has been a surge in the research and application of "Green energy" in the United States. This has been driven by the following three objectives: (1) to reduce the nation's reliance on foreign oil, (2) to mitigate emission of greenhouse gas, and (3) to create an economic stimulus within the United States. Switchgrass is the biomass of choice for the Southeastern United States. In this dissertation, we address a feedstock logistics problem associated with the delivery of switchgrass for conversion into biofuel. In order to satisfy the continual demand of biomass at a bioenergy plant, production fields within a 48-km radius of its location are assumed to be attracted into production. The bioenergy plant is expected to receive as many as 50-400 loads of biomass per day. As a result, an industrialized transportation system must be introduced as early as possible in order to remove bottlenecks and reduce the total system cost. Additionally, we assume locating multiple bioenergy plants within a given region for the production of biofuel. We develop mixed integer programming formulations for the feedstock logistics problem that we address and for some related problems, and we solve them either through the use of decomposition-based methods or directly through the use of CPLEX 12.1.0. The feedstock logistics problem that we address spans the entire system-from the growing of switchgrass to the transporting of bio-crude oil, a high energy density intermediate product, to a refinery for conversion into a final product. To facilitate understanding, we present the reader with a case study that includes a preliminary cost analysis of a real-life-based instance in order to provide the reader appropriate insights of the logistics system before applying optimization techniques for its solution. First, we consider the benefits of active versus passive ownership of the production fields. This is followed by a discussion on the selection of baler type, and then, a discussion of contracts between various business entities. The advantages of storing biomass at a satellite storage location (SSL) and interactions between the operations performed at the production field with those performed at the storage locations are then established. We also provide a detailed description of the operations performed at a SSL. Three potential equipment options are presented for transporting biomass from the SSLs to a utilization point, defined in this study as a Bio-crude Plant (BcP). The details of the entire logistics chain are presented in order to highlight the need for making decisions in view of the entire chain rather than basing them on its segments. We model the feedstock logistics problem as a combination of a 2-level facility location-allocation problem and a multiple traveling salesmen problem (mATSP). The 2-level facility location-allocation problem pertains to the allocation of production fields to SSLs and SSLs to one of the multiple bioenergy plants. The mATSP arises because of the need for scheduling unloading operations at the SSLs. To this end, we provide a detailed study of 13 formulations of the mATSP and their reformulations as ATSPs. First, we assume that the SSLs are always full, regardless of when they are scheduled to be unloaded. We, then, relax this assumption by providing precedence constraints on the availability of the SSLs. This precedence is defined in two different ways and, is then, effectively modeled utilizing all the formulations for the mATSP and ATSP. Given the location of a BcP for the conversion of biomass to bio-crude oil, we develop a feedstock logistics system that relies on the use of SSLs for temporary storage and loading of round bales. Three equipment systems are considered for handling biomass at the SSLs, and they are either placed permanently or are mobile, and thereby, travel from one SSL to another. We use a mathematical programming-based approach to determine SSLs and equipment routes in order to minimize the total cost incurred. The mathematical program is applied to a real-life production region in South-central Virginia (Gretna, VA), and it clearly reveals the benefits of using SSLs as a part of the logistics system. Finally, we provide a sensitivity analysis on the input parameters that we used. This analysis highlights the key cost factors in the model, and it emphasizes areas where biggest gains can be achieved for further cost reduction. For a more general scenario, where multiple BcPs have to be located, we use a nested Benders' decomposition-based method. First, we prove the validity of using this method. We, then, employ this method for the solution of a potential real-life instance. Moreover, we successfully solve problems that are more than an order of magnitude larger than those solved directly by CPLEX 12.1.0. Finally, we develop a Benders' decomposition-based method for the solution of a problem that gives rise to a binary sub-problem. The difficulty arises because of the sub-problem being an integer program for which the dual solution is not readily available. Our approach consists of first solving the integer sub-problem, and then, generating the convex hull at the optimal integer point. We illustrate this approach for an instance for which such a convex hull is readily available, but otherwise, it is too expensive to generate for the entire problem. This special instance is the solution of the mATSP (using Benders' decomposition) for which each of the sub-problems is an ATSP. The convex hull for the ATSP is given by the Dantzig, Fulkerson, and Johnson constraints. These constraints at a given integer solution point are only polynomial in number. With the inclusion of these constraints, a linear programming solution and its corresponding dual solution can now be obtained at the optimal integer points. We have proven the validity of using this method. However, the success of our algorithm is limited because of a large number of integer problems that must be solved at every iteration. While the algorithm is theoretically promising, the advantages of the decomposition do not seem to outweigh the additional cost resulting from solving a larger number of decomposed problems. / Ph. D.

Tesis por compendio / [ES] Algunos productos se caracterizan por su falta de homogeneidad, lo que significa que productos con diferentes características pueden ser obtenidos de un mismo proceso de producción debido a factores incontrolables como la naturaleza de las materias primas o las condiciones ambientales durante la producción. Hay cuatro aspectos que caracterizan la falta de homogeneidad en el producto: los subtipos homogéneos que se obtienen de un mismo lote de producción, la cantidad de productos que componen cada subtipo, el valor de cada uno de los subtipos, y el estado de los productos. La falta de homogeneidad en el producto dificulta la gestión de los procesos de las empresas y cadenas de suministro en el momento en el que los clientes requieren homogeneidad entre las unidades de producto que adquieren. Un ejemplo de esto se produce en el sector de la cerámica, en el que los clientes requieren que todas las unidades que van a ser ensambladas juntas tengan el mismo color, espesor y calidad por razones estéticas y de seguridad. Otro ejemplo es el extraído del sector agroalimentario, en el que el mercado final requiere productos que cumplan con un tamaño mínimo, un color particular, o sabor en el caso de las frutas. Además, el sector agroalimentario tiene la complejidad añadida producida por el deterioro de los productos a lo largo del tiempo, y la necesidad de los mercados de ofrecer a los clientes productos con una mínima duración tras su venta. En esta Tesis, se define como productos heterogéneos a aquellos productos que se pueden clasificar en subtipos homogéneos con una cantidad variable, mientras que los productos perecederos son aquellos que, además de ser heterogéneos, tienen falta de homogeneidad en su estado. De acuerdo con estos conceptos, el sector cerámico comercializa productos heterogéneos mientras que el sector agroalimentario comercializa productos perecederos. Esta Tesis propone marcos conceptuales y modelos de Investigación Operativa que soporten la gestión de cadenas de suministro con productos heterogéneos y perecederos en la toma de decisiones centralizada y distribuidas relacionadas con los niveles de decisión estratégica, táctica y operativa. El objetivo es mejorar la competitividad, sostenibilidad y flexibilidad de la cadena de suministro para adaptarse a los requerimientos del mercado bajo condiciones de incertidumbre. Para esto, se han propuesto modelos de Investigación Operativa deterministas e inciertos, cuyos resultados se comparan concluyendo que los resultados obtenidos con los modelos inciertos se adaptan mejor al comportamiento real de las cadenas de suministros.Los modelos de Investigación Operativa propuestos han contribuido a tres áreas de investigación: problemas operativos en el sector cerámico, problemas estratégicos en el sector agroalimentario y problemas de planificación en el sector agroalimentario. Las principales novedades en los problemas operativos en el sector cerámico son el modelado de las características de las baldosas cerámicas, la consideración de los requerimientos de homogeneidad entre unidades de diferentes líneas de pedido, y la posibilidad de realizar entregas parciales y entregas con retraso. Esta Tesis contribuye a los problemas estratégicos en el sector agroalimentario al diseñar una cadena de suministro completa de productos agroalimentarios frescos considerando el aspecto perecedero de los productos e integrando decisiones tácticas, y determinando el impacto real que tiene considerar el aspecto perecedero de los productos durante el diseño de la cadena de suministro ... / [CA] Alguns productes es caracteritzen per la seua falta d'homogeneïtat, el que significa que productes amb diferents característiques poden ser obtinguts d'un mateix procés de producció degut a factors incontrolables com la naturalesa de les matèries primeres o les condicions ambientals durant la producció. Hi ha quatre aspectes que caracteritzen la falta d'homogeneïtat en el producte: els subtipus homogenis que s'obtenen d'un mateix lot de producció, la quantitat de productes que componen cada subtipus, el valor de cada un dels subtipus, i l'estat dels productes. La falta d'homogeneïtat en el producte dificulta la gestió dels processos de les empreses i cadenes de subministrament en el moment en què els clients requerixen homogeneïtat entre les unitats de producte que adquirixen. Un exemple d'açò es produïx en el sector de la ceràmica, en el que els clients requerixen que totes les unitats que seran acoblades juntes tinguen el mateix color, grossària i qualitat per raons estètiques i de seguretat. Un altre exemple és l'extret del sector agroalimentari, en el que el mercat final requerix productes que complisquen amb una grandària mínima, un color particular, o sabor en el cas de les fruites. A més, el sector agroalimentari té la complexitat afegida produïda pel deteriorament dels productes al llarg del temps, i la necessitat dels mercats d'oferir als clients productes amb una mínima duració després de la seua venda. En aquesta Tesi, es definix com a productes heterogenis a aquells productes que es poden classificar en subtipus homogenis amb una quantitat variable, mentres que els productes peribles són aquells que, a més de ser heterogenis, tenen falta d'homogeneïtat en el seu estat. D'acord amb aquests conceptes, el sector ceràmic comercialitza productes heterogenis mentres que el sector agroalimentari comercialitza productes peribles. Aquesta Tesi proposa marcs conceptuals i models d'Investigació Operativa que suporten la gestió de cadenes de subministrament amb productes heterogenis i peribles en la presa de decisions centralitzada i distribuïdes relacionades amb els nivells de decisió estratègica, tàctica i operativa. L'objectiu és millorar la competitivitat, sostenibilitat i flexibilitat de la cadena de subministrament per adaptar-se als requeriments del mercat sota condicions d'incertesa. Per a açò, s'han proposat models d'Investigació Operativa deterministes i incerts, els resultats es comparen concloent que els resultats obtinguts amb els models incerts s'adapten millor al comportament real de les cadenes de subministraments. Els models d'Investigació Operativa proposats han contribuït a tres àrees d'investigació: problemes operatius en el sector ceràmic, problemes estratègics en el sector agroalimentari i problemes de planificació en el sector agroalimentari. Les principals novetats en els problemes operatius en el sector ceràmic són el modelatge de les característiques de les rajoles ceràmiques, la consideració dels requeriments d'homogeneïtat entre unitats de diferents línies de comanda, i la possibilitat de realitzar lliuraments parcials i lliuraments amb retard. Aquesta Tesi contribueix als problemes estratègics en el sector agroalimentari al dissenyar una cadena de subministrament completa de productes agroalimentaris frescos considerant l'aspecte perible dels productes, integrant decisions tàctiques, i determinant l'impacte real que té considerar l'aspecte perible dels productes durant el disseny de la cadena de subministrament ... / [EN] Some products are characterised by their lack of homogeneity, what means that products with different characteristics can be obtained from the same production process due to uncontrollable factors such as the nature of raw materials or the environmental conditions during production. There are four aspects that characterize the lack of homogeneity in the product: the homogeneous subtypes to be obtained from a production lot, the quantity of products that belong to each subtype, the value related to each of the subtypes and the state of the products. The lack of homogeneity in the product hinders the management of the supply chain or company's processes at the time customers require the homogeneity among the acquired units of product. An example of this is produced in the ceramic tile sector, in which customers need all acquired ceramic tiles that are going to be jointly assembled to have the same colour, thickness and quality for aesthetic and safety reasons. Another example is the extracted from the agri-food sector, in which final markets require products that meet some characteristics such as a minimum size, a particular colour or flavour in the case of fruits. In addition, the agri-food sector has the added complexity produced by the deterioration of products over time, and the need of markets to offer to end consumers products with a minimum durability after sale. In this Thesis, heterogeneous products are defined as products for which different subtypes can be obtained in a variable quantity while perishable products are those that, apart from being heterogeneous, have a lack of homogeneity in their state. According to these concepts, ceramic sectors would commercialize heterogeneous products while the agri-food sector would do so with perishable products. This Thesis proposes conceptual frameworks and Operations Research models to support the management of supply chains with heterogeneous and perishable products in centralized and distributed decision-making processes related to strategic, tactical and operative decisional levels. The objective is to improve the supply chain competitiveness, sustainability and flexibility to adapt to market requirements under uncertain conditions. For this, both deterministic and uncertain Operations Research models have been proposed, whose results are compared concluding that results obtained with uncertain models better fit with the behaviour of real supply chains. The proposed Operations Research models have contributed to three research areas: operational problems in the ceramic sector, strategic problems in the agri-food sector and planning problems in the agri-food sector. Main novelties in the ceramic operational problems are the modelling of the characteristics of ceramic tile products, the consideration of homogeneity requirements between units from different order lines, and the possibility of making partial deliveries and delayed deliveries. This Thesis contributes to strategic problems in agri-food products by designing an entire fresh agri-food supply chain considering the perishability of products and integrating tactical decisions, and by determining the real impact that considering the products' perishability has on the supply chain design process ... / This Thesis has been developed in the Research Centre of Management and Production Engineering (CIGIP, for its acronym in Spanish “Centro de Investigación en Gestión e Ingeniería de Producción”) of the Universitat Politècnica de València with the support of the predoctoral grant Programme of Formation of University Professors (FPU, for its acronym in Spanish “Formación de Profesorado Universitario”) from the Spanish Ministry of Science, Innovation and Universities (Ref. FPU15/03595). The supervisors of this Thesis are Dr. Angel Ortiz, and Dra. María del Mar Alemany Diaz that are Professors in the Research Centre of Management and Production Engineering (CIGIP) of the Universitat Politècnica de València. The FPU grant has been endorsed by the supervisor Dr. Ángel Ortiz. This Thesis has also been supported by the project ‘RUC-APS: Enhancing and implementing Knowledge based ICT solutions within high Risk and Uncertain Conditions for Agriculture Production Systems’ (Ref. 691249) funded by the EU under its funding scheme H2020-MSCA-RISE-2015, the project ‘Methods and models for operations planning and order management in supply chains characterised by uncertainty in production due to the lack of product uniformity’ (PLANGES-FHP) (Ref. DPI2011- 23597) funded by the Spanish Ministry of Economy and Competitiveness. The projects RUC-APS and PLANGES-FHP have been led by the one of the supervisors of this Thesis Dr. María del Mar Eva Alemany. In order to obtain the international mention for this Thesis, three months of research stages have been made in the research agency Agenzia Lucana di Sviluppo e di Innovazione in Agricoltora, located in Metaponto (Italy) / Esteso Álvarez, A. (2020). Operations research models for the management of supply chains of perishable and heterogeneous products in uncertain contexts. Application to the agri-food and ceramic sectors [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/141099 / Compendio

[For the Abstract, please see the PDF files below, namely "front.pdf"] CONTENTS. Chapter 1 Introduction. Chapter 2 Gross and microscopic visceral anatomy of the male Cape fur seal with reference to organ size and growth. Chapter 3 Age determination and growth in the male Cape fur seal: part one, external body. Chapter 4 Age determination and growth in the male Cape fur seal: part two, skull. Chapter 5 Age determination and growth in the male Cape fur seal: part three, baculum. Chapter 6 Suture age as an indicator of physiological age in the male Cape fur seal. Chapter 7 Sexual dimorphism in the adult Cape fur seal: standard body length and skull morphology. Chapter 8 Reproduction in the male Cape fur seal: age at puberty and annual cycle of the testis. Chapter 9 Diet and foraging behaviour of the Cape fur seal. Chapter 10(a) The Impact of the fur seal industry on the distribution and abundance of Cape fur seals. Chapter 10(b) South African Airforce wildlife rescue: Cape fur seal pups washed from Black Rocks, Algoa Bay, during heavy seas, December 1976. Chapter 11(a) Operational interactions between Cape fur seals and fisheries: part one, trawl fishing. Chapter 11(b) Operational interactions between Cape fur seals and fisheries: part two, squid jigging and line fishing. Chapter 11(c) Operational interactions between Cape fur seals and fisheries: part three, entanglement in man-made debris. Chapter 12 Concentrations of heavy metals (Cd, Cu, Pb, Ni & Zn) and organochlorine contaminants (PCBs, DDT, DDE & DDD) in the blubber of Cape fur seals. Chapter 13 Endoparasites of the Cape fur seal. Chapter 14(a) Preliminary investigations of shark predation on Cape fur seals. Chapter 14(b) Aggressive behaviour of an adult male Cape fur seal towards a great white shark Carcharodon carcharias. Chapter 15 Conclusions and future directions.