Spelling suggestions: "subject:"heterojunction""
71 |
Ultra-wideband tunable circuit design using silicon-germanium heterojunction bipolar transistorsShankar, Subramaniam 20 May 2010 (has links)
This thesis explores the critical advantages of using silicon-germanium (SiGe) HBTs for RF front-end design. The first chapter looks at the SiGe BiCMOS technology platform and its important performance metrics. The second chapter discusses ultra-wide tuneability and the critical role that this functionality can have on real world applications. The third chapter presents simulated and measured results of two wideband ring oscillators (8-18 GHz) designed and fabricated in the Jazz 120 BiCMOS platform. A 7-22 GHz wideband VGA in the 8HP platform is also presented further exemplifying the wideband
capabilities of SiGe HBTs.
|
72 |
Development of III-nitride bipolar devices: avalanche photodiodes, laser diodes, and double-heterojunction bipolar transistorsZhang, Yun 28 July 2011 (has links)
This dissertation describes the development of III-nitride (III-N) bipolar devices for optoelectronic and electronic applications. Research mainly involves device design, fabrication process development, and device characterization for Geiger-mode gallium nitride (GaN) deep-UV (DUV) p-i-n avalanche photodiodes (APDs), indium gallium nitride (InGaN)/GaN-based violet/blue laser diodes (LDs), and GaN/InGaN-based npn radio-frequency (RF) double-heterojunction bipolar transistors (DHBTs). All the epitaxial materials of these devices were grown in the Advanced Materials and Devices Group (AMDG) led by Prof. Russell D. Dupuis at the Georgia Institute of Technology using the metalorganic chemical vapor deposition (MOCVD) technique.
Geiger-mode GaN p-i-n APDs have important applications in DUV and UV single-photon detections. In the fabrication of GaN p-i-n APDs, the major technical challenge is the sidewall leakage current. To address this issue, two surface leakage reduction schemes have been developed: a wet-etching surface treatment technique to recover the dry-etching-induced surface damage, and a ledged structure to form a surface depletion layer to partially passivate the sidewall. The first Geiger-mode DUV GaN p-i-n APD on a free-standing (FS) c-plane GaN substrate has been demonstrated.
InGaN/GaN-based violet/blue/green LDs are the coherent light sources for high-density optical storage systems and the next-generation full-color LD display systems. The design of InGaN/GaN LDs has several challenges, such as the quantum-confined stark effect (QCSE), the efficiency droop issue, and the optical confinement design optimization. In this dissertation, a step-graded electron-blocking layer (EBL) is studied to address the efficiency droop issue. Enhanced internal quantum efficiency (ɳi) has been observed on 420-nm InGaN/GaN-based LDs. Moreover, an InGaN waveguide design is implemented, and the continuous-wave (CW)-mode operation on 460-nm InGaN/GaN-based LDs is achieved at room temperature (RT).
III-N HBTs are promising devices for the next-generation RF and power electronics because of their advantages of high breakdown voltages, high power handling capability, and high-temperature and harsh-environment operation stability. One of the major technical challenges to fabricate high-performance RF III-N HBTs is to suppress the base surface recombination current on the extrinsic base region. The wet-etching surface treatment has also been employed to lower the surface recombination current. As a result, a record small-signal current gain (hfe) > 100 is achieved on GaN/InGaN-based npn DHBTs on sapphire substrates. A cut-off frequency (fT) > 5.3 GHz and a maximum oscillation frequency (fmax) > 1.3 GHz are also demonstrated for the first time. Furthermore, A FS c-plane GaN substrate with low epitaxial defect density and good thermal dissipation ability is used for reduced base bulk recombination current. The hfe > 115, collector current density (JC) > 141 kA/cm², and power density > 3.05 MW/cm² are achieved at RT, which are all the highest values reported ever on III-N HBTs.
|
73 |
Zinc oxide-silicon heterojunction solar cells by sputteringShih, Jeanne-Louise. January 2007 (has links)
Heterojunctions of n-ZnO/p-Si solar cells were fabricated by RF sputtering ZnO:Al onto boron-doped (100) silicon (Si) substrates. Zinc Oxide (ZnO) films were also deposited onto soda lime glass for electrical measurements. Sheet resistance measurements were performed with a four-point-probe on the glass samples. Values for samples evacuated for 14 hours prior to deposition increased from 7.9 to 10.17 and 11.5 O/□ for 40 W, 120 and 160 W in RF power respectively. In contrast, those evacuated for 2 hours started with a higher value of 22.5 O/□, and decreased down to 7.6 and 5.8 O/□. Vacuum annealing was performed for both the glass and the Si samples. Current-voltage measurements were performed on the ZnO/Si junctions in the dark and under illumination. Parameters such as open-circuit voltage, Voc; short-circuit current, Isc; fill factor, FF; and efficiency, eta were determined. A maximum efficiency of 0.25% among all samples was produced, with an I sc of 2.16 mA, Voc of 0.31V and a FF of 0.37. This was a sample fabricated at an RF power of 80 W. Efficiency was found to decline with vacuum annealing. Furthermore, interfacial state density calculated based on capacitance-voltage measurements showed an increase in the value with vacuum annealing. The results found suggest that the interface states may be due to an interdiffusion of atoms, possibly those of Zn into the Si surface. The Electron Beam Induced Current (EBIC) method was used to determine diffusion length to be at a value ∼40--80 mum and therefore a minority carrier lifetime calculated of 3 musec. It was also used to determine the surface recombination velocity (SRV) of the fractured surface of the Si bulk from the fabricated solar cells. An SRV of ∼500 cm/sec was determined from the fractured Si surface, at a point located at 30 and 20 mum away from the junction interface.
|
74 |
High-speed analog-to-digital conversion in SiGe HBT technologyLi, Xiangtao 19 May 2008 (has links)
The objective of this research is to explore high-speed analog-to-digital converters (ADCs) using silicon-germanium (SiGe) heterojunction bipolar transistors (HBTs) for wireless digital receiver applications. The stringent requirements of ADCs for the high-performance next-generation wireless digital receiver include (1) low power, (2) low cost, (3) wide input signal bandwidth, (4) high sampling rate, and (5) medium to high resolution. The proposed research achieves the objective by implementing high-performance ADC's key building blocks and integrating these building blocks into a complete sigma-delta analog-to-digital modulator that satisfies the demanding specifications of next-generation wireless digital receiver applications. The scope of this research is divided into two main parts: (1) high-performance key building blocks of the ADC, and (2) high-speed sigma-delta analog-to-digital modulator. The research on ADC's building blocks includes the design of two high-speed track-and-hold amplifiers (THA) and two wide-bandwidth comparators operating at the sampling rate > 10 GS/sec with satisfying resolution. The research on high-speed sigma-delta analog-to-digital modulator includes the design and experimental characterization of a high-speed second-order low-pass sigma-delta modulator, which can operate with a sampling rate up to 20 GS/sec and with a medium resolution. The research is envisioned to demonstrate that the SiGe HBT technology is an ideal platform for the design of high-speed ADCs.
|
75 |
Design of SiGe HBT power amplifiers for microwave radar applicationsAndrews, Joel 19 February 2009 (has links)
A novel modification to the standard cascode amplifier architecture is presented
in SiGe which allows for an optimal separation of gain and breakdown functions through
the mixed breakdown cascade architecture, opening the door for moderate power
amplifiers in SiGe. Utilizing this technique, a two-stage, high-gain amplifier operating at
X-Band is fabricated and measured. The 20 dB of gain per stage represents the highest
gain at X-Band at the time of publication. Additionally, a near one Watt power amplifier
is designed and fabricated at X-Band, which represents the highest output power in SiGe
at X-Band at time of publication. Related to the power amplifier design, thermal
considerations are also investigated. The validity of utilizing lumped mutual thermal
coupling in SiGe devices is presented. Using this finding, a thermal coupling model and
network which are compliant for use with commonly available HBT models and circuit
simulators is presented. This model and network is used to thermally optimize SiGe PA
cells based upon layout spacing.
|
76 |
Functional heterointerfaces via electromodulation spectroscopyKhong, Siong-Hee January 2010 (has links)
Functional heterojunctions in organic electronic devices are interfaces formed either between a conducting electrode and an organic semiconductor or between two different organic semiconductors in blended and multilayered structures. This thesis is primarily concerned with the energy level alignment and the interfacial electronic structures at functional heterojunctions encountered in electronic devices made with solution-processable semiconducting polymers. Investigations on the electronic structures across these heterointerfaces are performed with the combined use of electromodulation and photoemission spectroscopic techniques. Electromodulation and ultraviolet photoemission spectroscopic techniques enable direct determination of the surface work functions of electrodes at the electrode/semiconducting polymer interfaces. We overcame the inherent problems faced by electromodulation spectroscopy, which undermine accurate determination of interfacial electronic structures, by performing electroabsorption (EA) measurements at reduced temperatures. We showed in this thesis that low-temperature EA spectroscopy is a surface sensitive technique that can determine the interface electronic structures in electrode/polymer semiconductor/electrode diodes. Using this technique, we demonstrated that the energy level alignments in these solution-processed organic electronic devices are determined by the surface work functions of passivated metals rather than by those of clean metals encountered in ultrahigh vacuum. This thesis also discloses our studies on the electronic structures in polymeric diodes with type II donor-acceptor heterojunctions using the EA spectroscopy. We showed that minimising meausurement temperature and attenuating EA illumination intensity enable accurate determinations of the electronic structures in these devices. We demonstrated that the electronic structures and the performance characteristics of multilayered polymer light-emitting diodes are also determined by the surface work functions of passivated metals. Our investigations confirm that electronic doping of the organic active layers, rather than minimisation of the Schottky barriers at electrode/polymer contacts, holds the key in realising high-performance organic light-emitting devices.
|
77 |
Zinc oxide-silicon heterojunction solar cells by sputteringShih, Jeanne-Louise. January 2007 (has links)
No description available.
|
78 |
Reliability Study Of Ingap/gaas Heterojunction Bipolar Transistor Mmic Technology By Characterization, Modeling And SimulationLiu, Xiang 01 January 2011 (has links)
Recent years have shown real advances of microwave monolithic integrated circuits (MMICs) for millimeter-wave frequency systems, such as wireless communication, advanced imaging, remote sensing and automotive radar systems, as MMICs can provide the size, weight and performance required for these systems. Traditionally, GaAs pseudomorphic high electron mobility transistor (pHEMT) or InP based MMIC technology has dominated in millimeter-wave frequency applications because of their high fT and fmax as well as their superior noise performance. But these technologies are very expensive. Thus, for low cost and high performance applications, InGaP/GaAs heterojunction bipolar transistors (HBTs) are quickly becoming the preferred technology to be used due to their inherently excellent characteristics. These features, together with the need for only one power supply to bias the device, make InGaP/GaAs HBTs very attractive for the design of high performance fully integrated MMICs. With the smaller dimensions for improving speed and functionality of InGaP/GaAs HBTs, which dissipate large amount of power and result in heat flux accumulated in the device junction, technology reliability issues are the first concern for the commercialization. As the thermally triggered instabilities often seen in InGaP/GaAs HBTs, a carefully derived technique to define the stress conditions of accelerated life test has been employed in our study to acquire post-stress device characteristics for the projection of long-term device performance degradation pattern. To identify the possible origins of the post-stress device behaviors observed experimentally, a two iv dimensional (2-D) TCAD numerical device simulation has been carried out. Using this approach, it is suggested that the acceptor-type trapping states located in the emitter bulk are responsible for the commonly seen post-stress base current instability over the moderate base-emitter voltage region. HBT-based MMIC performance is very sensitive to the variation of core device characteristics and the reliability issues put the limit on its radio frequency (RF) behaviors. While many researchers have reported the observed stress-induced degradations of GaAs HBT characteristics, there has been little published data on the full understanding of stress impact on the GaAs HBTbased MMICs. If care is not taken to understand this issue, stress-induced degradation paths can lead to built-in circuit failure during regular operations. However, detection of this failure may be difficult due to the circuit complexity and lead to erroneous data or output conditions. Thus, a practical and analytical methodology has been developed to predict the stress impacts on HBTbased MMICs. It provides a quick way and guidance for the RF design engineer to evaluate the circuit performance with reliability considerations. Using the present existing EDA tools (Cadance SpectreRF and Agilent ADS) with the extracted pre- and post-stress transistor models, the electrothermal stress effects on InGaP/GaAs HBT-based RF building blocks including power amplifier (PA), low-noise amplifier (LNA) and oscillator have been systematically evaluated. This provides a potential way for the RF/microwave industry to save tens of millions of dollars annually in testing costs. v The world now stands at the threshold of the age of advanced GaAs HBT MMIC technology and researchers have been exploring here for years. The reliability of GaAs HBT technology is no longer the post-design evaluation, but the pre-design consideration. The successful and fruitful results of this dissertation provide methods and guidance for the RF designers to achieve more reliable RF circuits with advanced GaAs HBT technology in the future.
|
79 |
Study of Parasitic Barriers in SiGe HBTs Due to P-n Junction Displacement and Bias EffectsMathur, Nitish 11 October 2001 (has links)
No description available.
|
80 |
Étude par spectroscopie résolue en temps des mécanismes de séparation de charges dans des mélanges photovoltaïquesGélinas, Simon January 2009 (has links)
Mémoire numérisé par la Division de la gestion de documents et des archives de l'Université de Montréal.
|
Page generated in 0.0702 seconds