CAPES / O processo de digestão anaeróbia é muito importante no tratamento dos esgotos sanitários, por ser eficiente, simples e de baixo custo de implantação, operação e manutenção. Embora o Brasil tenha à disposição processos anaeróbios consolidados, o saneamento básico ainda é deficiente no país, e a otimização de reatores anaeróbios tem o intuito de melhorar a viabilidade, efetividade e ampliação dos sistemas de tratamento dos esgotos sanitários. O objetivo deste projeto foi avaliar o desempenho através do comportamento dinâmico e hidrodinâmico de reator anaeróbio híbrido (UAHB), com variação do tempo de detenção hidráulica (TDH) de 4 a 12 h e da DQO (amostras brutas) de 250 a 1250 mgO2L-1. O reator, com volume útil de 22,1 L, foi operado com meio suporte de anéis corrugados de Policloreto de Polivinila (PVC) e mantido a temperatura ambiente, sendo o afluente de alimentação, sintético simulando o esgoto sanitário. Foram analisados os parâmetros físico-químicos: temperatura do líquido e do ar, pH, alcalinidade total (AT), alcalinidade a bicarbonato (AB), ácidos voláteis (AV), demanda química de oxigênio (DQO), demanda bioquímica de oxigênio (DBO520), Turbidez, Sólidos Totais (ST), Sólidos Suspensos Totais (SST), nitrogênio total kjeldahl (N-NTK), nitrogênio amoniacal (Namon), nitrito(N-NO2-), nitrato (N-NO3-) e fósforo total (P). Foi avaliado o comportamento hidrodinâmico e verificada a existência de anomalias hidráulicas, pela técnica de estímulo-resposta tipo pulso com injeção do traçador eosina Y. Ao final dos experimentos, foi realizada a análise estatística para encontrar a condição operacional ótima, bem como os modelos estatísticos para validação dos experimentos. Em todas as condições operacionais foi possível observar que o reator UAHB entrou em equilíbrio dinâmico aparente (EEDA) com produção de alcalinidade para neutralizar os ácidos voláteis produzidos no processo de acidogênese e acetogênese da digestão anaeróbia. O aumento da carga orgânica volumétrica acarretou no aumento das eficiências de remoção em DQO (amostras brutas e filtradas), DBO520 e Turbidez, mas reduziu as remoções de Sólidos Totais e Sólidos Suspensos Totais. A diminuição do TDH reduziu as eficiências de remoção dos parâmetros DQO (amostras brutas e filtradas), DBO520, Sólidos Totais, Sólidos Suspensos Totais e Turbidez. Em relação à hidrodinâmica, em todas as condições operacionais foi observado o efeito de cauda longa, o regime de escoamento no interior do reator UAHB foi classificado como de tanques de mistura completa em série (NCSTR). Foi verificada a presença de zonas mortas no reator, a eficiência hidráulica foi em média 65% para as três condições e não foi possível observar a presença de curtos-circuitos para os três TDH testados. Pela análise estatística do delineamento composto central rotativo (DCCR), a condição ótima de operação para o reator foi para o TDH 12 h e DQO (amostras brutas) 553 mgO2.L-1. / The anaerobic digestion process is very important in the treatment of sewage, as it is an efficient, simple process and low cost of implementation, operation and maintenance. Although Brazil has provided consolidated anaerobic processes, sanitation is still poor in the country, and the optimization of anaerobic reactors aims to improve the viability, effectiveness and expansion of treatment systems for sewage. The aim of this research project is to evaluate the reactor's performance through dynamic and hydrodynamic behavior of hybrid anaerobic reactor (UAHB) with a range of hydraulic retention time (HRT) of 4 to 12 hours and COD (gross samples) 250 - 1250 mgO2L -1. The reactor, with a volume of 22.1 L was operated with support means corrugated rings of Polyvinyl chloride (PVC) and kept at room temperature, the influent feed, simulating the synthetic wastewater. the physicochemical parameters were analyzed: temperature of the liquid and air, pH, total alkalinity (TA), bicarbonate alkalinity (BA), volatile acids (VA), chemical oxygen demand (COD), biochemical oxygen demand (BOD ), Turbidity, Total Solids (TS), total suspended solids (TSS), nitrogen Total Kjeldahl (NTK-N), ammonia nitrogen (amon-N), nitrite (NO2-N), nitrate (NO3-N) and Total phosphorus (P). It evaluated the hydrodynamic behavior and the determination of hydraulic anomalies, the stimulus-response pulse technique with injection of the tracer eosin Y. At the end of the experiments, statistical analysis was performed to find the optimal operating condition as well as the statistical models for validation experiments. In all operating conditions it was observed that the UAHB Reactor became apparent dynamic equilibrium (ADE) with alkalinity production to neutralize the volatile acids produced in acetogenesis process of anaerobic digestion. The increased of organic loading rate resulted in increased efficiencies in the removal of COD (gross and filtered samples), BOD and Turbidity, but reduced removals of Total Solids and Total Suspended Solids. The decrease in HRT reduced the removal efficiencies of COD parameters (grosss and filtered samples), BOD, Total Solids, Total Suspended Solids and Turbidity. Regarding the hydrodynamic in all operating conditions was observed long tail effect, the flow regime inside the reactor UAHB was rated as complete mixing tanks in series (N-CSTR). The presence of dead zones in the reactor was checked, the hydraulic efficiency was averaged 65% for the three conditions and it was not possible to observe the presence of short circuits for the three HRT tested. For the statistical analysis of the central rotary compound design (CRCD), the optimum operating condition for the reactor was to HRT 12 h and COD (gross samples) 553 mgCOD.L-1.

CAPES / O processo de digestão anaeróbia é muito importante no tratamento dos esgotos sanitários, por ser eficiente, simples e de baixo custo de implantação, operação e manutenção. Embora o Brasil tenha à disposição processos anaeróbios consolidados, o saneamento básico ainda é deficiente no país, e a otimização de reatores anaeróbios tem o intuito de melhorar a viabilidade, efetividade e ampliação dos sistemas de tratamento dos esgotos sanitários. O objetivo deste projeto foi avaliar o desempenho através do comportamento dinâmico e hidrodinâmico de reator anaeróbio híbrido (UAHB), com variação do tempo de detenção hidráulica (TDH) de 4 a 12 h e da DQO (amostras brutas) de 250 a 1250 mgO2L-1. O reator, com volume útil de 22,1 L, foi operado com meio suporte de anéis corrugados de Policloreto de Polivinila (PVC) e mantido a temperatura ambiente, sendo o afluente de alimentação, sintético simulando o esgoto sanitário. Foram analisados os parâmetros físico-químicos: temperatura do líquido e do ar, pH, alcalinidade total (AT), alcalinidade a bicarbonato (AB), ácidos voláteis (AV), demanda química de oxigênio (DQO), demanda bioquímica de oxigênio (DBO520), Turbidez, Sólidos Totais (ST), Sólidos Suspensos Totais (SST), nitrogênio total kjeldahl (N-NTK), nitrogênio amoniacal (Namon), nitrito(N-NO2-), nitrato (N-NO3-) e fósforo total (P). Foi avaliado o comportamento hidrodinâmico e verificada a existência de anomalias hidráulicas, pela técnica de estímulo-resposta tipo pulso com injeção do traçador eosina Y. Ao final dos experimentos, foi realizada a análise estatística para encontrar a condição operacional ótima, bem como os modelos estatísticos para validação dos experimentos. Em todas as condições operacionais foi possível observar que o reator UAHB entrou em equilíbrio dinâmico aparente (EEDA) com produção de alcalinidade para neutralizar os ácidos voláteis produzidos no processo de acidogênese e acetogênese da digestão anaeróbia. O aumento da carga orgânica volumétrica acarretou no aumento das eficiências de remoção em DQO (amostras brutas e filtradas), DBO520 e Turbidez, mas reduziu as remoções de Sólidos Totais e Sólidos Suspensos Totais. A diminuição do TDH reduziu as eficiências de remoção dos parâmetros DQO (amostras brutas e filtradas), DBO520, Sólidos Totais, Sólidos Suspensos Totais e Turbidez. Em relação à hidrodinâmica, em todas as condições operacionais foi observado o efeito de cauda longa, o regime de escoamento no interior do reator UAHB foi classificado como de tanques de mistura completa em série (NCSTR). Foi verificada a presença de zonas mortas no reator, a eficiência hidráulica foi em média 65% para as três condições e não foi possível observar a presença de curtos-circuitos para os três TDH testados. Pela análise estatística do delineamento composto central rotativo (DCCR), a condição ótima de operação para o reator foi para o TDH 12 h e DQO (amostras brutas) 553 mgO2.L-1. / The anaerobic digestion process is very important in the treatment of sewage, as it is an efficient, simple process and low cost of implementation, operation and maintenance. Although Brazil has provided consolidated anaerobic processes, sanitation is still poor in the country, and the optimization of anaerobic reactors aims to improve the viability, effectiveness and expansion of treatment systems for sewage. The aim of this research project is to evaluate the reactor's performance through dynamic and hydrodynamic behavior of hybrid anaerobic reactor (UAHB) with a range of hydraulic retention time (HRT) of 4 to 12 hours and COD (gross samples) 250 - 1250 mgO2L -1. The reactor, with a volume of 22.1 L was operated with support means corrugated rings of Polyvinyl chloride (PVC) and kept at room temperature, the influent feed, simulating the synthetic wastewater. the physicochemical parameters were analyzed: temperature of the liquid and air, pH, total alkalinity (TA), bicarbonate alkalinity (BA), volatile acids (VA), chemical oxygen demand (COD), biochemical oxygen demand (BOD ), Turbidity, Total Solids (TS), total suspended solids (TSS), nitrogen Total Kjeldahl (NTK-N), ammonia nitrogen (amon-N), nitrite (NO2-N), nitrate (NO3-N) and Total phosphorus (P). It evaluated the hydrodynamic behavior and the determination of hydraulic anomalies, the stimulus-response pulse technique with injection of the tracer eosin Y. At the end of the experiments, statistical analysis was performed to find the optimal operating condition as well as the statistical models for validation experiments. In all operating conditions it was observed that the UAHB Reactor became apparent dynamic equilibrium (ADE) with alkalinity production to neutralize the volatile acids produced in acetogenesis process of anaerobic digestion. The increased of organic loading rate resulted in increased efficiencies in the removal of COD (gross and filtered samples), BOD and Turbidity, but reduced removals of Total Solids and Total Suspended Solids. The decrease in HRT reduced the removal efficiencies of COD parameters (grosss and filtered samples), BOD, Total Solids, Total Suspended Solids and Turbidity. Regarding the hydrodynamic in all operating conditions was observed long tail effect, the flow regime inside the reactor UAHB was rated as complete mixing tanks in series (N-CSTR). The presence of dead zones in the reactor was checked, the hydraulic efficiency was averaged 65% for the three conditions and it was not possible to observe the presence of short circuits for the three HRT tested. For the statistical analysis of the central rotary compound design (CRCD), the optimum operating condition for the reactor was to HRT 12 h and COD (gross samples) 553 mgCOD.L-1.

Submitted by Mery Piedad Zamudio Igami (mery@ipen.br) on 2017-03-10T16:45:35Z No. of bitstreams: 0 / Made available in DSpace on 2017-03-10T16:45:35Z (GMT). No. of bitstreams: 0 / Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP) / O presente estudo foi realizado para verificar a possibilidade de redução do núcleo do reator IEA-R1 do IPEN/CNEN-SP. Cálculos neutrônicos foram desenvolvidos para um conjunto de novas configurações para que, a posteriori, a análise termo-hidráulica e de segurança pudessem ser realizadas. As novas configurações analisadas são menores por diversos motivos, como obter uma melhor utilização do combustível, melhor distribuição dos fluxos de nêutrons, dentre outros. Para que se possa atingir tais configurações, a densidade de Urânio no combustível deve ser aumentada. Neste estudo, combustíveis de U3Si2-Al com 4,8gU/cm3 foram testados e novos núcleos para o reator IEA-R1 foram propostos e discutidos. A análise neutrônica não impõe restrições aos núcleos estudados. A análise termohidráulica mostrou que as margens de segurança e os perfis de temperatura ao longo das placas combustíveis não excedem os limites de projeto. Os coeficientes de temperatura obtidos para os novos núcleos, no caso isotérmico, são todos negativos, conforme desejado. A queima mostrou que núcleos supercompactos não apresentam excesso de reatividade suficiente para o funcionamento dos mesmo, ao se utilizar combustíveis com 4,8gU/cm3. Um APR (Acidente de Perda de Refrigerante) foi simulado para os núcleos remanescentes. A ruptura da fronteira do primário se mostrou o acidente mais crítico, devido ao curto tempo para o esvaziamento completo da piscina do reator. As temperaturas atingidas após o descobrimento foram calculadas e não excedem aquelas cujos valores propiciam empolamento nas placas combustíveis (475 °! a 550 °!), uma vez que se obedeça os tempos de esvaziamento seguro da piscina para as novas configurações. / Tese (Doutorado em Tecnologia Nuclear ) / IPEN/D / Instituto de Pesquisas Energéticas e Nucleares - IPEN-CNEN/SP / FAPESP: 11/17090-7

O desempenho de uma unidade de flotação por ar dissolvido (FAD) em escala piloto, tratando água destinada ao abastecimento contendo 50 uC e 05 uT, foi investigada sob o ponto de vista das partículas presentes (micro-bolhas e flocos) e da hidrodinâmica. A análise centrou-se na zona de reação da unidade de FAD onde foi desenvolvido o modelo matemático proposto por Reali (1991). A determinação das partículas foi realizada por método que emprega a análise de imagem. A condição hidrodinâmica foi avaliada por meio de ensaios de estímulo e resposta, combinada com a análise tridimensional do escoamento feita através de mapeamento utilizando equipamento que emprega ultra-som (sonda micro-ADV). Para a consecução do trabalho foram desenvolvidos dois métodos. Um para aquisição, tratamento e obtenção da distribuição de tamanho de micro-bolhas e flocos utilizando a análise de imagem digital em instalação com escoamento contínuo, sem a extração de amostras. Outro, envolvendo o desenvolvimento de programa (VelDigital3D) para tratamento dos dados da sonda utilizada. Inicialmente, foram realizados os ensaios de validação da utilização da sonda micro-ADV em água contendo micro-bolhas de ar e os ensaios de mapeamento da unidade utilizando a referida sonda conjugada ao programa VelDigital3D. Posteriormente, foram investigados alguns possíveis agentes na aglutinação das micro-bolhas após a despressurização tais como: i) as condições de mistura expressas em termos da taxa de aplicação superficial (TAS) e tempo de detenção na zona de reação (Tdz.r), ii) razão de recirculação (p), iii) a variação de pH e, iv) a dosagem de coagulante (\'AL POT.+3\'). Finalmente, a sensibilidade do modelo matemático proposto por Reali (1991) para a zona de reação de unidades de FAD convencional foi verificada com base nos parâmetros de projeto: tempo de detenção da zona de reação (Tdz.r) e taxa de aplicação superficial na zona de clarificação TASap. (downflow); e com base nos parâmetros operacionais: distribuição de tamanho de partículas (micro-bolhas e flocos) e razão de recirculação (p). As principais conclusões foram: i) a sonda micro-ADV pode ser utilizada para obtenção do perfil de velocidade em águas contendo micro-bolhas de ar, nas vazões investigadas; ii) o escoamento no interior da zona de reação apresentou um padrão bem definido de recirculação ao longo da altura, confirmando os resultados obtidos com os ensaios estímulo e resposta; iii) a variação do diâmetro médio das micro-bolhas foi muito pequena (de 20 a 30 \'mü\'m), embora tenha havido ressalvas e iv) o modelo proposto por Reali (1991) foi sensível aos parâmetros investigados e responde coerentemente com o desempenho da unidade piloto de FAD. / This work investigated the performance of a dissolved air flotation (DAF) pilot plant, used to treat drinking water containing 05 Tu and 50 Cu. The particles (micro-bubbles and flocs) and hydraulic characteristics were taken into account. The focus was given in the reaction zone as hypothesized by Reali\'s mathematic model (REALI, 1991). An image analyses was used to assess particles distribution sizes. The hydraulics of the DAF tank was assessed by using a pulse stimulus-response test combined with the three-dimensional flow analyses carried-out with equipment that applied ultra sound (microADV). Therefore, two methods were developed; one for the acquisition, treatment and also to obtain the micro-bubbles and flocs sizes distribution, without the need of extracting samples and another, involved the development of a software (VelDigital3D) in order to treat the microADV data. Initially, the application of the microADV in the DAF process was evaluated. After, the data collection was made and the result was treated by using the VelDigital3D software. Sequentially, the effects of some agents for micro-bubbles coalescence after the releasing point were investigated: i) mixture conditions in terms of hydraulic loading rate (HLR) and detention time (DT); ii) recirculation rate (p); iii) pH variation and, iv) coagulant dosage (\'AL POT.+3\'). Finally, the mathematic model behavior proposed by Reali (1991) was investigated by varying some parameters in the design, such as: detention time in the reaction zone (DTr.z) and hydraulic loading rate in the clarification zone HLRc.z (dowflow); and by varying some operational parameters, such as: particles sizes distribution (micro-bubbles and flocs) and recirculation rate (p). The main conclusions were: i) the microADV probe can be used to obtain the velocity flow profile in water containing micro-bubbles; ii) the flow within the reaction zone showed a well defined pattern of recirculation throughout the height of the unit, confirming the obtained results by using the stimulus-response tests; iii) the variation of micro-bubbles medium size was low (from 20 to 30 \'mü\'m) but some points regarding this aspect were discussed and, iv) the behavior of the mathematical model proposed by Reali (1991) showed a significant adjustment to the experimental data proving that it can be applied to analyzed design parameters.

Bien que l’écologie de la truite (Salmo trutta) ait déjà été bien étudiée, les processus expliquant la dynamique spatio-temporelle des populations restent à caractériser. L’objectif de cette thèse était d’identifier les processus démographiques (ex. survie ou déplacements) et l’influence des processus biotiques (interactions entre individus) et abiotiques (conditions environnementales) qui structurent dans le temps et dans l’espace les différentes classes d’âge (alevins, juvéniles et adultes) de ces populations. J’ai étudié l’influence sur la survie apparente de (1) la densité-dépendance et (2) des conditions environnementales vécues directement par les truites (habitat hydraulique et température de l’eau). Pour évaluer la transférabilité des résultats, j’ai évalué (3) l’échelle spatiale (globale ou locale) à laquelle opéraient les processus et (4) si ces processus variaient entre populations (approche hiérarchique). J’ai considéré la dynamique de 45 populations de truites dont 22 sont situées à l’aval d’un ouvrage hydroélectrique. A large échelle, il est apparu que le recrutement de populations séparées par des distances allant jusqu’à 75km peut être synchronisé par de fortes crues lors de l’émergence des alevins ou des déplacements du substrat de ponte. Nous avons synthétisé les résultats de l’application d’un modèle déterministe de dynamique de population, calibrés localement sur neuf stations aux conditions environnementales bien caractérisées. Cette synthèse a montré que des processus locaux influençaient directement la dynamique des populations. Enfin, la construction d’un modèle hiérarchique a montré le rôle structurant de la mortalité densité-dépendante des juvéniles et des adultes, dont l’intensité augmentait en l’absence d’abris (<2% de la surface) ou variait avec la température de l’eau (diminution pour les juvéniles et augmentation pour les adultes). Ce travail fournit des bases scientifiques aux gestionnaires d’ouvrages hydro-électriques pour leur permettre de limiter leur influence sur les populations de poissons et répondre ainsi aux demandes réglementaires / Brown trout (Salmo trutta) ecology was largely studied. However, the process structuring the spatiotemporal patterns of population dynamics remains unclear. The objective of this thesis was to identify the demographic processes (e.g. survival or displacements) and the influence of biotic (between-individuals interactions) and abiotic (environmental conditions) processes structuring the age-stages (fry, juveniles and adults) of these populations in time and space.I studied (1) the role of density-dependence on survival and (2) the influence of environmental conditions experienced by trouts (hydraulics and water temperature). To assess the results’ transferability, I studied (3) the spatial scale (global or local) of influence of the processes and (4) if those processes varied among populations (hierarchical approach).I considered the dynamics of 45 trout populations, 22 being located downstream a hydropower facility. At a large scale, the recruitment of distant populations (up to 75 km apart) may be synchronized by large floods during emergence of fry or by spawning substratum displacements. We summarized the results of a determinist population dynamics models, locally calibrated on nine reaches showing well-described environmental conditions. This summary revealed the influence of various local drivers on population dynamics. Finally, a hierarchical model showed that density-dependent mortality among juveniles and adults was a key biotic process. The strength of the competition was greater in absence of shelter (<2% of the surface) and varied with water temperature (decreasing for juveniles and increasing for adults).The results of this work will provide scientific basis to hydropower facility managers. This will help them to reduce their influence on trout populations and respond to regulatory demands

Ce travail de thèse s'intéresse à l'effet d'une variation longitudinale de l'occupation du sol de la plaine d'inondation sur l'écoulement d'une rivière en débordement. Nous traitons le cas d'une transition entre une zone de prairie et une zone de forêt, et vice versa. Cette variation d'occupation du sol est associée à une transition de rugosité hydraulique entre une rugosité de fond (prairie fortement immergée) et des macro-rugosités émergées (arbres), modélisées respectivement par une moquette plastifiée et par un champ de cylindres. Ces écoulements sont étudiés en laboratoire dans un canal de dimension 18 m x 3 m. Dans un premier temps, nous considérons l'écoulement à travers un champ de cylindres émergents en lit simple, en étudiant l'effet du fond sur le sillage des cylindres et le phénomène de seiche (fortes oscillations de la surface libre). Dans un deuxième temps, nous nous penchons sur le développement vers l'uniformité d'un écoulement en lit composé de rugosité uniforme. La croissance asymétrique de la couche de mélange du lit composé, la propriété d'autosimilarité ainsi que l'organisation tridimensionnelle des structures turbulentes cohérentes associées à la couche de mélange sont analysées. Le troisième temps fait l'objet de la transition longitudinale de rugosité en lit composé, dont l'effet sur la couche de mélange et sur les structures cohérentes est discuté. Nous évaluons également les différentes contributions au transfert latéral de quantité de mouvement entre lit mineur et plaine d'inondation par diffusion turbulente, par échange de masse et par les courants secondaires / This PhD thesis investigates the effect of a longitudinal change in floodplain land use on an overflooding river flow. We consider a transition between a meadow and a woodland and vice versa. This change in land use is associated with a change in hydraulic roughness, between a bed roughness (highly submerged meadow) and emergent macro-roughnesses (trees), respectively modelled by a plastic artificial grass and an array of emergent cylinders. The flows are experimentally investigated in an 18 m x 3 m laboratory flume. In a first step, we investigate the flow through a cylinder array in a single channel, focusing on the effect of bed roughness on the cylinder wakes and on the seiche phenomenon (strong free surface oscillations). In a second step, we study the development towards flow uniformity of compound channel flows with a uniform hydraulic roughness on the floodplains. The asymmetrical growth of the compound channel mixing layer, the self-similarity property and the three-dimensional organisation of the turbulent coherent structures associated with the mixing layer are analysed. In a third step, we investigate the longitudinal change in roughness in compound channel configuration, which effects on mixing layer and on coherent structures are discussed. We also assess the contributions to lateral transfers of momentum between main channel and floodplain by turbulent diffusion, by mass exchange and by secondary currents

L’évaluation du débit en réseaux hydrauliques à surface libre est une problématique actuelle sur le plan scientifique, à forts enjeux technologiques, économiques et écologiques. Dans cette thèse, de nouvelles méthodologies d’instrumentation, basées sur une synergie entre mesures non intrusives de hauteur d’eau et modélisation numérique ont été développées. Celles-ci s’appliquent d’une part à des collecteurs dont le fonctionnement hydraulique est complexe et, d’autre part, à des ouvrages non-standard (Venturi, déversoirs d’orage). Ce travail de thèse multidisciplinaire vise une meilleure compréhension de l’écoulement pour en déduire des relations Q=f(hi) plus robustes, spécifiques à chaque site et associées à leurs incertitudes; mais également l’identification de possibles modifications du site de mesure afin d’améliorer l’estimation du débit. Au final, l’applicabilité des méthodologies développées a été éprouvée au travers de plusieurs études sur sites réels. / The evaluation of the flow rate in free surface water systems is a current scientific problem, related to high technological, economical and ecological issues. In this study, new methods of instrumentation based on a synergy between non-intrusive water level measurements and numerical modeling have been developed. These methods are applied first to sewer pipes with complex hydraulic conditions then to non-standard hydraulic structures (Venturi flumes, Combined Sewer Overflows). This multidisciplinary work aims at a better understanding of the flow to identify more robust site-specific Q=f(hi) relationships related to their uncertainties. It also aims at the identification of possible modification of the measurement site in order to improve the flow rate evaluation. Finally, the applicability of the developed methodologies has been tested through several real site studies.

This article presents the hydraulic space of urban Lima in the 17th century, and the effortsof Lima’s cabildo (city council) to govern it. Based on a detailed analysis of the referencesto water in the Libros de cabildos de Lima from 1588-1700, the management of this naturalresource is examined through close consideration of the infrastructure installed andthe political authorities established. A three-pronged approach considers natural processes,infrastructure, and authorities together, to discuss three case studies: 1) the Rímac river, thelevees, and the levee commissioners, 2) the springs, the drinking water pipeline networkand the pipelines commissioners, and 3) the rains, religious processions, and San Marcelothe “lawyer of the city for the waters.” For each case study, the cabildo’s strategies for waterresource management are evaluated for success or failure. / Este artículo presenta el espacio hidráulico limeño urbano del siglo XVII y los esfuerzos delcabildo de Lima para gobernarlo. Con base en un análisis detallado de las menciones sobreel agua en los Libros de cabildos de Lima de 1588-1700 se examina el manejo de esterecurso natural a través de la instalación de infraestructura y la creación de autoridades políticas.Con una perspectiva tripartita se consideran los procesos naturales, la infraestructuray las autoridades en conjunto para discutir tres casos: 1) el río Rímac, los tajamares y loscomisarios de tajamares, 2) los puquios, la red de cañerías y los comisarios de cañerías,y 3) las lluvias, las procesiones religiosas y San Marcelo el “abogado de la ciudad para lasaguas”. En cada uno de los tres casos se evalúa la efi cacia de las estrategias del cabildopara administrar los recursos hídricos.

In the first part of master thesis is presented general introduction to district heating system (DHS) and hydraulic calculation for DHS. The next part deals with analysis operation of DHS and the pressure diagram for certain time interval. Subsequently, the thermohydraulic characteristics for the hydraulic main branch (comparing manual calculation with software calculation) and also the selected thermal and hydraulic characteristics for the whole DHS are shown. The last part is focused on the determination of the amount of heat supplied based on the ultrasonic flowmeter and the temperature probes. Subsequently, the computer simulation is also carried out, aiming at approximating the real heat supply from heat source to solved thermal network in winter.

This thesis presents a proposal of newly designed concept for travel hydraulic circuit of vibratory single drum roller ASC 110. The maximum machine gradeability was chosen as the main parameter for hydraulic circuit proposal. After selecting the new hydraulic travel concept, suitable hydraulic components have been selected. Length and local losses for two different machine speeds were calculated for sufficient hydraulic circuit design. Hydraulic losses have also been calculated for use in different climatic conditions. A new machine cooling concept has also been proposed. Heating and cooling curves of hydraulic circuit were calculated. For the purpose of comparing gradeability and energy balance of the newly designed travel concept compared to the existing one currently in mass production, both machines were fitted with measuring points. On both machines were measured for example, pressure, flow and temperature in each hydraulic circuit branch and others. From the time dependencies of the above-mentioned parameters it was possible to determine the energy efficiency of the newly designed concept. To assess the maximum gradeability, the slope of the hill was measured. Comparing the two machines, it has been found that the two hydraulic circuit solution has significantly improved traction properties in demanding machine applications, especially when driving uphill and downhill. This concept also affects less fuel consumption and places less demand on the hydraulic oil cooler due to its energy efficiency.