京都大学 / 新制・課程博士 / 博士(工学) / 甲第24628号 / 工博第5134号 / 新制||工||1981(附属図書館) / 京都大学大学院工学研究科物質エネルギー化学専攻 / (主査)教授 陰山 洋, 教授 阿部 竜, 教授 藤原 哲晶 / 学位規則第4条第1項該当 / Doctor of Philosophy (Engineering) / Kyoto University / DFAM

The complex, IrH₂(PMe₃)₃Cl (1), was previously found to be, not only unexpectedly water-soluble but also an effective homogeneous catatyst for the hydrogenation of unsaturates in water. The results of extensive ³¹P NMR studies on the aqueous system of (1) indicate that (1) is in equilibrium with the iridium(III) dihydrido “aquo” complex, [IrH₂(PMe₃)₃(H₂O)]⁺, and not the μ-chloro bridged complex, { [IrH₂(PMe₃)₃]₂Cl}⁺ (2), as previously reported. The calculated K_eq value for the aqueous equilibrium is (0.0037 ± 0.0003) M. Thermodynamic data (ΔH = 30.8 kJ/mol, ΔS = 56.0 J/(Kmol), and ΔG = 14.1 kJ/mol) obtained from variable temperature ³¹P NMR studies are consistent with the proposed equilibrium system. The complexes IrH₂(PMe₃)₃X (X = O₂CPh (3), I (4), and Br (6) were synthesized and examined. The complexes IrH₂(PMe₃)₃X (X = H₂O and F) could not be isolated. (3) was determined to dissociate completely in water to form the iridium(III) dihydrido “‘aquo” complex, [IrH₂(PMe₃)₃(H₂O)]⁺, seemingly explaining the greater catalytic activity of (3). Solubility of the halo complexes decreased from moderately soluble (1), to slightly soluble (6), to very slightly soluble (4). The solubilities of (4) and (6) were too low to allow quantification of their equilibria. Finally it was observed that linear relationships exist between the electronegativity of the ligand, X, and the ¹H and ³¹P NMR chemical shifts of the hydrides and the phosphines for the complexes, IrH₂(PMe₃)₃X. These relationships are consistent with the findings of Birnbaum. / Ph. D.

Die Speicherung von Wasserstoff in Form von Hydriden im festen Aggregatzustand hat den Vorteil einer hohen volumetrischen und gravimetrischen Wasserstoffspeicherdichte, die sowohl für die stationäre als auch die mobile Anwendung nötig ist. Um die Anforderungen dieser Anwendungen erfüllen zu können, müssen die Speichereigenschaften dieser Materialien weiter verbessert werden. Als zentrales Konzept dieser Dissertation wird die Nanostrukturierung verfolgt, die eine vielversprechende Strategie zur Modifizierung der thermodynamischen und kinetischen Eigenschaften von Hydriden darstellt. Die Transmissionselektronenmikroskopie (TEM) stellt dabei eine unverzichtbare Untersuchungsmethode solch nanoskopischer Materialien dar. Als problematisch erweist sich dabei die durch Radiolyse hervorgerufene Zersetzung der meisten Hydride bei der Beleuchtung mit dem abbildenden Elektronenstrahl. Im ersten Teil dieser Arbeit wird eine Methodik entwickelt um dieses Phänomen quantitativ mit Hilfe von Valenzelektronenenergieverlustspektroskopie zu untersuchen. Hierzu kommt kugelgemahlenes MgH2 als Modellsystem zum Einsatz. Die Dehydrierung kann quantitativ durch die inelastische Streuung der hochenergetischen Elektronen am MgH2-Plasmon erklärt werden. Eine Lösung dieses grundlegenden Problems wird theoretisch an Hand von Multislice TEM-Kontrastsimulationen untersucht. Hierbei wird ein TEM Experiment unter Wasserstoff bei Umgebungsdruck anstatt unter Vakuum simuliert, was mit Hilfe eines speziellen TEM Halters, in dem das Gas durch elektronentransparente Fenster eingeschlossen ist, realisiert werden kann. Im zweiten Teil wird der Einfluss des Nanoconfinements (Nanoeinschließung), einer speziellen Form der Nanostrukturierung, des komplexen Hydrids LiBH4 auf dessen Wasserstoffspeichereigenschaften untersucht, wofür eine neuartige nanoporöse aerogel-ähnliche Kohlenstoff-Gerüststruktur zum Einsatz kommt. Diese wird durch Salt Templating synthetisiert - einer simplen und nachhaltigen Methode zur Herstellung nanoporöser kohlenstoffbasierter Materialien mit großen Porenvolumina. Es wird gezeigt, dass durch das Nanoconfinement die Wasserstoffdesorptionstemperatur, die für makroskopisches LiBH4 bei über 400 °C liegt, auf 310 °C sinkt und die Desorption bereits bei 200 °C einsetzt. Eine teilweise Rehydrierung ist unter moderaten Bedingungen (100 bar und 300 °C) möglich, wobei die Reversibilität durch eine partielle Oxidation des amorphen Bor gehemmt ist. Im Gegensatz zu Beobachtungen einer aktuellen Veröffentlichung von in hoch geordnetem, nanoporösen Kohlenstoff eingebetteten LiBH4 deuten die in-situ TEM-Heizexperimente der vorliegenden Arbeit darauf hin, dass beide Reaktionsprodukte (B und LiH) in den Poren des aerogel-ähnlichen Kohlenstoffs verbleiben. / Storing hydrogen in solid hydrides has the advantage of high volumetric and gravimetric hydrogen densities, which are needed for both stationary and mobile applications. However, the hydrogen storage properties of these materials must be further improved in order to meet the requirements of these applications. Nanostructuring, which represents one of the central approaches of this thesis, is a promising strategy to tailor the thermodynamic and kinetic properties of hydrides. Transmission electron microscopy (TEM) is an indispensable tool for the structural characterization of such nanosized materials, however, most hydrides degrade fast upon irradiation with the imaging electron beam due to radiolysis. In the first part of this work, a methodology is developed to quantitatively investigate this phenomenon using valence electron energy loss spectroscopy on ball milled MgH2 as a model system. The dehydrogenation can be quantitatively explained by the inelastic scattering of the incident high energy electrons by the MgH2 plasmon. A solution to this fundamental problem is theoretically studied by virtue of multislice TEM contrast simulations of a windowed environmental TEM experiment, which allows for performing the TEM analysis in hydrogen at ambient pressure rather than vacuum. In the second part, the effect of the nanoconfinement of the complex hydride LiBH4 on its hydrogen storage properties is investigated. For this, a novel nanoporous aerogel-like carbon scaffold is used, which is synthesized by salt templating - a facile and sustainable technique for the production of nanoporous carbon-based materials with large pore volumes. It is shown that the hydrogen desorption temperature, which is above 400 °C for bulk LiBH4, is reduced to 310 °C upon this nanoconfinement with an onset temperature as low as 200 °C. Partial rehydrogenation can be achieved under moderate conditions (100 bar and 300 °C), whereby the reversibility is hindered by the partial oxidation of amorphous boron. In contrast to recent reports on LiBH4 nanoconfined in highly ordered nanoporous carbon, in-situ heating in the TEM indicates that both decomposition products (B and LiH) remain within the pores of the aerogel-like carbon.

Call number: LD2668 .T4 1985 S335 / Master of Science

The work in this thesis relates to the preparation and structural and electrical characterisation of calcium and strontium hydrides, imides and nitride hydrides. Conventional solid state methods in controlled atmospheres were used to synthesise these materials. High temperature neutron diffraction, thermal analysis and conductivity studies performed on calcium and strontium hydride suggest an order – disorder transition in these materials at 350 – 450°C. Disordering is believed to involve rapid exchange of hydride ions across two crystallographic sites. This manifests itself in a lowering of the activation energy for bulk hydride ion conduction. The hydride ion conduction is good in these undoped materials: σ[total]subscript = 0.01 S/cm for CaH₂ at 1000K; for SrH₂, σ[total]subscript = 0.01 S/cm at 830K. Doping of SrH₂ with NaH causes a significant increase in the low temperature conductivity, due to presence of extrinsic defects. The high temperature conductivity is negatively affected by NaH doping. Calcium nitride hydride (Ca₂NH) was obtained as a single phase material by reacting either calcium metal or calcium hydride (CaH₂) in an argon atmosphere containing 5 – 7% H₂ and 1 – 7% N₂. Imide ions substituting for hydride and nitride ions constitute a major chemical defect in this material. Long range ordering of the nitride and hydride ions occurs, giving rise to a double cubic crystal symmetry. This order breaks down at 600 – 650°C. Applying the same reaction conditions to strontium metal results in a mixed phase of strontium nitride hydride and imide. No long range order in the nitride hydride phase could be observed. Doping Ca₂NH with lithium hydride (LiH) causes the appearance of a second calcium imide phase, whereas doping with sodium hydride (NaH) increases the amount of imide ions as a defect in the nitride hydride structure, thereby decreasing the long range ordering of nitride and hydride ions.

Die Speicherung von Wasserstoff in Form von Hydriden im festen Aggregatzustand hat den Vorteil einer hohen volumetrischen und gravimetrischen Wasserstoffspeicherdichte, die sowohl für die stationäre als auch die mobile Anwendung nötig ist. Um die Anforderungen dieser Anwendungen erfüllen zu können, müssen die Speichereigenschaften dieser Materialien weiter verbessert werden. Als zentrales Konzept dieser Dissertation wird die Nanostrukturierung verfolgt, die eine vielversprechende Strategie zur Modifizierung der thermodynamischen und kinetischen Eigenschaften von Hydriden darstellt. Die Transmissionselektronenmikroskopie (TEM) stellt dabei eine unverzichtbare Untersuchungsmethode solch nanoskopischer Materialien dar. Als problematisch erweist sich dabei die durch Radiolyse hervorgerufene Zersetzung der meisten Hydride bei der Beleuchtung mit dem abbildenden Elektronenstrahl. Im ersten Teil dieser Arbeit wird eine Methodik entwickelt um dieses Phänomen quantitativ mit Hilfe von Valenzelektronenenergieverlustspektroskopie zu untersuchen. Hierzu kommt kugelgemahlenes MgH2 als Modellsystem zum Einsatz. Die Dehydrierung kann quantitativ durch die inelastische Streuung der hochenergetischen Elektronen am MgH2-Plasmon erklärt werden. Eine Lösung dieses grundlegenden Problems wird theoretisch an Hand von Multislice TEM-Kontrastsimulationen untersucht. Hierbei wird ein TEM Experiment unter Wasserstoff bei Umgebungsdruck anstatt unter Vakuum simuliert, was mit Hilfe eines speziellen TEM Halters, in dem das Gas durch elektronentransparente Fenster eingeschlossen ist, realisiert werden kann. Im zweiten Teil wird der Einfluss des Nanoconfinements (Nanoeinschließung), einer speziellen Form der Nanostrukturierung, des komplexen Hydrids LiBH4 auf dessen Wasserstoffspeichereigenschaften untersucht, wofür eine neuartige nanoporöse aerogel-ähnliche Kohlenstoff-Gerüststruktur zum Einsatz kommt. Diese wird durch Salt Templating synthetisiert - einer simplen und nachhaltigen Methode zur Herstellung nanoporöser kohlenstoffbasierter Materialien mit großen Porenvolumina. Es wird gezeigt, dass durch das Nanoconfinement die Wasserstoffdesorptionstemperatur, die für makroskopisches LiBH4 bei über 400 °C liegt, auf 310 °C sinkt und die Desorption bereits bei 200 °C einsetzt. Eine teilweise Rehydrierung ist unter moderaten Bedingungen (100 bar und 300 °C) möglich, wobei die Reversibilität durch eine partielle Oxidation des amorphen Bor gehemmt ist. Im Gegensatz zu Beobachtungen einer aktuellen Veröffentlichung von in hoch geordnetem, nanoporösen Kohlenstoff eingebetteten LiBH4 deuten die in-situ TEM-Heizexperimente der vorliegenden Arbeit darauf hin, dass beide Reaktionsprodukte (B und LiH) in den Poren des aerogel-ähnlichen Kohlenstoffs verbleiben.:List of Figures vi 1. Introduction 1 2. Fundamentals 5 2.1. Solid state hydrogen storage 5 2.2. Thermodynamics 7 2.3. Magnesiumhydride, MgH2 9 2.4. Lithiumborohydride, LiBH4 10 2.5. Nanoconfinement 12 2.5.1. Nanoconfinement of MgH2 13 2.5.2. Nanoconfinement of LiBH4 15 2.6. Radiation damage of hydrides in the TEM 17 3. Theoretical and Experimental Methods 19 3.1. Ball milling 19 3.2. X-ray diffraction analysis 19 3.3. Thermal Characterization 20 3.3.1. Differential Scanning Calorimetry 20 3.3.2. Coupled Thermogravimetry and Mass Spectroscopy 21 3.4. Melt infiltration of LiBH4 21 3.5. Solid State Nuclear Magnetic Resonance 21 3.6. Transmission Electron Microscopy 23 3.6.1. In-situ TEM Heating 25 3.6.2. Environmental TEM 26 3.6.3. Electron Energy Loss Spectroscopy 28 3.6.4. Multislice Simulations 33 4. Electron Beam induced Dehydrogenation of MgH2 38 4.1. Microscopic Model of Hydrogen Release 38 4.2. Determination of Characteristic Electron Doses 39 4.3. Beam Damage Mechanism 42 4.4. Thickness Dependence of the Electron Dose 43 4.5. Conclusions for the Electron Beam Induced Dehydrogenation 47 4.6. Multislice Simulations for ETEM Studies 47 4.6.1. Methods of the Multislice Simulations 48 4.6.2. Results and Discussion of the Multislice Simulations 50 4.6.3. Conclusions of the Multislice Simulations 54 5. Nanoconfinement of LiBH4 in Aerogel-Like Carbon 56 5.1. Nanoporous Carbon Scaffolds 56 5.2. DSC Analysis of Melt Infiltration 58 5.3. XRD Analysis 59 5.4. Thermogravimetry and Mass Spectrometry Analysis 60 5.4.1. Hydrogen Desorption Properties of Nanoconfined LiBH4 60 5.4.2. Rehydrogenation of Nanoconfined LiBH4 63 5.5. In-situ STEM Analysis 63 5.6. Solid State 11B NMR 67 6. Conclusions 69 A. Appendix 71 A.1. Derivation of the Fourier-Log Deconvolution 71 A.2. Derivation of Equation 4.2 73 Bibliography 75 / Storing hydrogen in solid hydrides has the advantage of high volumetric and gravimetric hydrogen densities, which are needed for both stationary and mobile applications. However, the hydrogen storage properties of these materials must be further improved in order to meet the requirements of these applications. Nanostructuring, which represents one of the central approaches of this thesis, is a promising strategy to tailor the thermodynamic and kinetic properties of hydrides. Transmission electron microscopy (TEM) is an indispensable tool for the structural characterization of such nanosized materials, however, most hydrides degrade fast upon irradiation with the imaging electron beam due to radiolysis. In the first part of this work, a methodology is developed to quantitatively investigate this phenomenon using valence electron energy loss spectroscopy on ball milled MgH2 as a model system. The dehydrogenation can be quantitatively explained by the inelastic scattering of the incident high energy electrons by the MgH2 plasmon. A solution to this fundamental problem is theoretically studied by virtue of multislice TEM contrast simulations of a windowed environmental TEM experiment, which allows for performing the TEM analysis in hydrogen at ambient pressure rather than vacuum. In the second part, the effect of the nanoconfinement of the complex hydride LiBH4 on its hydrogen storage properties is investigated. For this, a novel nanoporous aerogel-like carbon scaffold is used, which is synthesized by salt templating - a facile and sustainable technique for the production of nanoporous carbon-based materials with large pore volumes. It is shown that the hydrogen desorption temperature, which is above 400 °C for bulk LiBH4, is reduced to 310 °C upon this nanoconfinement with an onset temperature as low as 200 °C. Partial rehydrogenation can be achieved under moderate conditions (100 bar and 300 °C), whereby the reversibility is hindered by the partial oxidation of amorphous boron. In contrast to recent reports on LiBH4 nanoconfined in highly ordered nanoporous carbon, in-situ heating in the TEM indicates that both decomposition products (B and LiH) remain within the pores of the aerogel-like carbon.:List of Figures vi 1. Introduction 1 2. Fundamentals 5 2.1. Solid state hydrogen storage 5 2.2. Thermodynamics 7 2.3. Magnesiumhydride, MgH2 9 2.4. Lithiumborohydride, LiBH4 10 2.5. Nanoconfinement 12 2.5.1. Nanoconfinement of MgH2 13 2.5.2. Nanoconfinement of LiBH4 15 2.6. Radiation damage of hydrides in the TEM 17 3. Theoretical and Experimental Methods 19 3.1. Ball milling 19 3.2. X-ray diffraction analysis 19 3.3. Thermal Characterization 20 3.3.1. Differential Scanning Calorimetry 20 3.3.2. Coupled Thermogravimetry and Mass Spectroscopy 21 3.4. Melt infiltration of LiBH4 21 3.5. Solid State Nuclear Magnetic Resonance 21 3.6. Transmission Electron Microscopy 23 3.6.1. In-situ TEM Heating 25 3.6.2. Environmental TEM 26 3.6.3. Electron Energy Loss Spectroscopy 28 3.6.4. Multislice Simulations 33 4. Electron Beam induced Dehydrogenation of MgH2 38 4.1. Microscopic Model of Hydrogen Release 38 4.2. Determination of Characteristic Electron Doses 39 4.3. Beam Damage Mechanism 42 4.4. Thickness Dependence of the Electron Dose 43 4.5. Conclusions for the Electron Beam Induced Dehydrogenation 47 4.6. Multislice Simulations for ETEM Studies 47 4.6.1. Methods of the Multislice Simulations 48 4.6.2. Results and Discussion of the Multislice Simulations 50 4.6.3. Conclusions of the Multislice Simulations 54 5. Nanoconfinement of LiBH4 in Aerogel-Like Carbon 56 5.1. Nanoporous Carbon Scaffolds 56 5.2. DSC Analysis of Melt Infiltration 58 5.3. XRD Analysis 59 5.4. Thermogravimetry and Mass Spectrometry Analysis 60 5.4.1. Hydrogen Desorption Properties of Nanoconfined LiBH4 60 5.4.2. Rehydrogenation of Nanoconfined LiBH4 63 5.5. In-situ STEM Analysis 63 5.6. Solid State 11B NMR 67 6. Conclusions 69 A. Appendix 71 A.1. Derivation of the Fourier-Log Deconvolution 71 A.2. Derivation of Equation 4.2 73 Bibliography 75

No description available.

This PhD thesis presents investigations of hydrogen incorporation in Zintl phases and transition metal oxides. Hydrogenous Zintl phases can serve as important model systems for fundamental studies of hydrogen-metal interactions, while at the same time hydrogen-induced chemical structure and physical property changes provide exciting prospects for materials science. Hydrogen incorporation in transition metal oxides leads to oxyhydride systems in which O and H together form an anionic substructure. The H species in transition metal oxides may be highly mobile, making these materials interesting precursors toward other mixed anion systems.  Zintl phases consist of an active metal, M (alkali, alkaline earth or rare earth) and a more electronegative p-block metal or semimetal component, E (Al, Ga, Si, Ge, etc.). When Zintl phases react with hydrogen, they can either form polyanionic hydrides or interstitial hydrides, undergo full hydrogenations to complex hydrides, or oxidative decomposition to more E-rich Zintl phases. The Zintl phases investigated here comprised the CaSi2, Eu3Si4, ASi (A= K, Rb) and GdGa systems which were hydrogenated at various temperature, H2 pressure, and dwelling time conditions. For CaSi2, a regular phase transition from the conventional 6R to the rare 3R took place and no hydride formation was observed. In contrast, GdGa and Eu3Si4 were very susceptible to hydrogen uptake. Already at temperatures below 100 ºC the formation of hydrides GdGaH2-x and Eu3Si4H2+x was observed. The magnetic properties of the hydrides (antiferromagnetic) differ radically from that of the Zintl phase precursor (ferromagnetic). Upon hydrogenating ASi at temperatures around 100 oC, silanides ASiH3 formed which contain discrete complex ion units SiH3-. The much complicated β – α order-disorder phase transition in ASiH3 was evaluated with neutron powder diffraction (NPD), 2H NMR and heat capacity measurements.  A systematic study of the hydride reduction of BaTiO3 leading to perovskite oxyhydrides BaTiO3-xHx was done. A broad range of reducing agents including NaH, MgH2, CaH2, LiAlH4 and NaBH4 was employed and temperature and dwelling conditions for hydride reduction examined. Samples were characterized by X-ray powder diffraction (XRPD), thermal gravimetric analysis and 1H NMR. The concentration of H that can be incorporated in BaTiO3-xHx was found to be very low, which is in contrast with earlier reports. Instead hydride reduction leads to a high concentration of O vacancies in the reduced BaTiO3. The highly O-deficient, disordered, phases - BaTiO3-xHy□(x-y) with x up to 0.6 and y in a range 0.05 – 0.2 and (x-y) &gt; y – are cubic and may represent interesting materials with respect to electron and ion transport as well as catalysis. / <p>At the time of the doctoral defense, the following papers were unpublished and had a status as follows: Paper 3: Manuscript. Paper 5: Manuscript.</p>

The main focus of the present work is the recovery process for spent fuels based on catalytic hydrogenation of liquid organic hydrides (LOH). To gain the knowledge about the possible hurdles of hydrogen loading process, the hydrogenation of 9-ethylcarbazole as a model compound was elected to be studied in more detail. The structures of the intermediates and products of this reaction were characterized for the first time using combined GC-MS and NMR analysis with reference to DFT calculations. The fully saturated product was found to be a mixture of stereoisomers. A reaction model was developed which agreed well with the experimental results. The combined theoretical and experimental approaches were also undertaken to identify catalytic sites on the metal surface and their role in the hydrogenation of 9-ethylcarbazole. Kinetically stable intermediate (Plus 8 [H]) containing a central unsaturated “pyrrole” ring was found to be accumulated in the solution over a ruthenium black catalyst. Its further hydrogenation was found to involve its unusual shuttling from terraced sites to higher indexed sites. The stability of Plus 8 [H] was found to be influenced by the type of active sites present on the surface of the catalyst, as well as by the electronic structure of the metal. In addition, the kinetics of the hydrogenation was analyzed experimentally and the activation energies were obtained for all of the intermediate steps. Further understanding of how the molecules interact with the catalyst surface was provided by examining the hydrogenation activity and selectivity of a series of LOH. The general factors involved in LOH structure- catalyst –activity trend were outlined. Overall, due to a number of defined challenges in the LOH spent fuel recharging, it is believed that this complex H2 storage strategy is not likely to meet the targets for wide scale applications.

Cette thèse est consacrée à l'étude de composés riches en magnésium innovants destinés au stockage solide de l'hydrogène. Le but est de déstabiliser l'hydrure de Mg et d'accélérer sa cinétique de sorption par des effets d'alliage et de nano-structuration. La première famille de composés concerne les phases pseudo-binaires Mg6Pd1-xMTx (MT = Ni, Ag, Cu). Leurs propriétés structurales et les effets de substitution du Pd ont été étudiés par diffraction des rayons X, microscopie électronique à balayage et microsonde de Castaing. Les propriétés thermodynamiques et cinétiques d'hydrogénation de ces matériaux ont ensuite été déterminées par réaction solide-gaz. Différents mécanismes d'hydrogénation sont mis en jeu en fonction de l'élément de substitution. La nature des phases formées lors de la réaction d'hydrogénation modifie la stabilité des systèmes métal-hydrogène. Ainsi, la transformation de métal à hydrure est caractérisée par au moins deux plateaux de pression. Le premier plateau a lieu à une pression proche de celle de Mg/MgH2, alors que le second se produit à pression plus élevée. La détermination des valeurs d'enthalpie et d'entropie de réaction ont permis de quantifier la déstabilisation atteinte. Les meilleures cinétiques de désorption sont obtenues pour l'alliage au Ni, grâce à l'effet catalytique de la phase Mg2NiH4 formée lors de l'hydrogénation. La seconde approche vise à combiner les effets d'alliage et de nano-structuration. Des nanoparticules de Mg6Pd atteignant des tailles aussi petites que 3 nm sont confinées dans des matrices carbonées nano-poreuses. En comparant leurs propriétés d'hydrogénation à celles de l'alliage massif équivalent, on démontre non seulement que la cinétique de (dés)hydrogénation des nanoparticules est bien plus rapide, mais aussi que leur état hydrogéné est déstabilisé. Enfin, des nano-composites MgH2-TiH2 ont été synthétisés par broyage mécanique sous atmosphère réactive. L'ajout d'un catalyseur (TiH2) et la nano-structuration du Mg permettent de considérablement accélérer les cinétiques d'absorption et désorption d'hydrogène dans le Mg. Afin de comprendre le rôle de la phase TiH2 sur les propriétés cinétiques remarquables de ces nano-composites, leurs propriétés structurales ont été déterminées par diffraction des rayons X et des neutrons. L'existence d'une interface cohérente entre les phases Mg et TiH2 est d'importance majeure pour faciliter la mobilité de H au sein du nano-composite. De plus, il est démontré que les inclusions de TiH2 freinent la croissance de grain de Mg/MgH2, permettant ainsi de maintenir la nano-structuration des composés lors de leur cyclage / This thesis is dedicated to the study of novel magnesium-rich compounds for solid state hydrogen storage. The aim is to destabilize Mg hydride and accelerate its sorption kinetics by alloying and nanostructuration. The first family of compounds concerns the Mg6Pd1-xTMx (TM = Ni, Ag, Cu) pseudo-binary phases. Their structural properties and the effects of Pd substitution have been studied by X-ray diffraction, scanning electron microscopy and electron microprobe analyses. Their thermodynamics and kinetics of hydrogenation have been determined by solid-gas reaction. Different hydrogenation mechanisms take place depending on the substituting element. The stability of the metal-hydrogen system is altered by the nature of the phases formed during hydrogenation reaction. Thus, metal to hydride transformation is characterized by at least two absorption plateau pressures. The pressure of the first plateau is similar to that of Mg/MgH2 while the second one occurs at higher pressure. The enthalpy and entropy of reaction are determined to quantify the destabilizing effect of Pd by TM substitution. Best desorption kinetics are found for the Ni containing alloy thanks to the catalytic effect of the Mg2NiH4 phase formed on hydrogenation. The second approach aims to combine alloying with nanostructuration effects. Nanoparticles of Mg6Pd as small as 3 nm are confined into nanoporous carbon matrix. By comparing their hydrogenation properties with those of the bulk alloy, we demonstrate that not only the (de)hydrogenation kinetics are much faster for the nanoparticles, but also that their hydrided state is destabilized. Finally, MgH2-TiH2 nanocomposites were synthesized by mechanical milling under reactive atmosphere. The addition of a catalyst (TiH2) and Mg nanostructuration allow strongly accelerating the sorption kinetics of hydrogen in Mg. To understand the role of the TiH2 phase on the outstanding kinetics of these nanocomposites, their structural properties have been determined by X-ray and neutron diffraction. The existence of a coherent interface between Mg and TiH2 phases is of major importance to facilitate H-mobility within the nanocomposite. Furthermore, it is shown that the TiH2 inclusions inhibit the Mg/MgH2 grain growth, thus maintaining the composites nanostructure during their cycling