In this study, optical behavior of metal nanoparticles having dimensions smaller than the wavelength of visible light is studied experimentally and numerically. Gold (Au) and silver (Ag) nanoparticles are studied due to their superior optical properties when compared to other metals. A compact code based on Discrete Dipole Approximation (DDA) is developed to compute extinction efficiencies of nanoparticles with various different properties such as material, dimension and geometry. To obtain self consistent nanoparticle arrays with well defined geometries and dimensions, Electron Beam Lithography (EBL) technique is mainly used as the manufacturing method. Dose parameters required to produce nanoparticles with dimensions down to 50 nm over substrates with different electrical conductivities are determined. Beam current is found to affect the doseV size relation. The use of thin Au films as antistatic layer for e-beam patterning over insulating substrates is considered and production steps, involving instabilities due to contaminants introduced to the system during additional removal steps, are clarified. 4 nm thick Au layer is found to provide sufficient conductivity for e-beam patterning over insulating substrates. An optical setup capable of performing transmittance and reflectance measurements of samples having small areas patterned with EBL is designed. Sizes of the metal nanoparticles are determined by scanning electron microscope (SEM) and spectral data obtained using the optical setup is analyzed to find out the parameters affecting the localized surface plasmon resonances (LSPR). Arrays of particles with diameters between 50 &ndash / 200 nm are produced and optically analyzed. Size and shape of the nanoparticles are found to affect the resonance behavior. Furthermore, lattice constants of the particle arrays and surrounding medium are also shown to influence the reflectance spectra. Axes with different lengths in ellipsoidal nanoparticles are observed to cause distinguishable resonance peaks when illuminated with polarized light. Peak intensities obtained from both polarizations are observed to decrease under unpolarized illumination. Binary systems consisting of nanosized particles and holes provided better contrast for transmitted light.

Electrochemical biosensors are cost effective, fast and portable devices, which can determine the existence and amounts of chemicals in a specific medium. These devices have many potential applications in many fields such as determination of diseases, process and product control, environmental monitoring, and drug research. To realize these potentials of the devices, many studies are being carried out to increase their sensitivity, selectivity and long term stabilities. Surface modification studies with various types of particles (metal nano particles, carbon nano tubes etc.) can be count among these studies. Although zeolites and zeo-type materials are investigated for many years, they still hold interest on them due to their capabilities. By means of their chemical resistances, large surface areas, tailorable surface properties, and porous structures they can be applied in many applicational fields. In some recent studies, these properties are intended to be used in the field of biosensors. The purpose of the current study was to investigate the effect of zeolite nanoparticles on electrochemical biosensor performances. Firstly, several different procedures were investigated in order to find the best and optimum methodology to attach previously synthesized zeolites on Si wafer substrates for the first time. For this purpose, the ultrasonication, spin coating and direct attachment methods were used and their efficiencies were compared. Perfectly oriented, fully covering, zeolite monolayers are produced by direct attachment method. Successively produced zeolite thin films were then patterned with the help of Electron Beam Lithography technique to show the compatibility of coating methods to the CMOS technology. Combination of Direct Attachment and EBL techniques resulted well controlled zeolite monolayer patterns. Then zeolite modified electrochemical biosensors were tested for their performances. With these experiments it was intended to improve the selectivity, sensitivity and storage stabilities of standard electrochemical biosensors. Experiments, conducted with different types of zeolites, showed that zeolites have various effects on the performances of electrochemical biosensors. Amperometric biosensor response magnitudes have been doubled with the addition of Silicalites. Faster conductometric electrode responses were achieved with enzyme immobilization on zeolite film technique. Also it is seen that Beta type zeolites modified through different ion exchange procedures, resulted different responses in IS-FET measurements.

In this study, a laminated glass unit which consists of two glass sheets bonded together by PVB is analyzed as a curved beam and as a cylindrical shell. Laminated glass curved beams and shells are used in architecture, aerospace, automobile and aircraft industries. Curved beam and shell structures differ from straight structures because of their initial curvature. Because of mathematical complexity most of the studies are about linear behavior rather than nonlinear behavior of curved beam and shell units. Therefore it is necessary to develop a mathematical model considering large deflection theory to analyze the behavior of curved beams and shells. Mechanical behavior of laminated glass structures are complicated because they can easily perform large displacement since they are very thin and the materials with the elastic modulus have order difference. To be more precise modulus of elasticity of glass is about 7*104 times greater than the modulus of elasticity of PVB interlayer. Because of the nonlinearity, analysis of the laminated glass has to be performed by considering large deflection effects. The mathematical model is developed for curved beams and shells by applying both the variational and the minimum potential energy principles to obtain nonlinear governing differential equations. The iterative technique is employed to obtain the deflections. Computer programs are developed to analyze the behavior of cylindrical shell and curved beam. For the verification of the results obtained from the developed model, the results from finite element models and experiments are used. Results used for verification of the model and the explanation of the bahavior of the laminated glass curved beams and shells are presented in figures.

The Compact Muon Solenoid (CMS) Experiment operates at the Large Hadron Collider (LHC) which is the highest energy particle accelerator in the world. CMS is a general purpose detector designed to investigate a wide range of physics, including the search for the Higgs boson. The measurement of photon production in the CMS experiment is crucial since it represents an irreducible background for many new physics searches, such as decay of Higgs to two photon, supersymmetry and extra-dimensions. The study of beam halo contamination is important for the correct measurement of photon production. This thesis presents a way to identify and remove this contamination by using the timing and the shower shape of the photons.

Zeolites are crystalline aluminosilicates which have highly ordered pore structures and high surface area. Also the tailorable surface properties, high ion-exchange capability, high chemical, thermal, and mechanical strength make these particles an important candidate for various application such as sensors, catalysis, dielectric materials, separation, and membrane technologies. Although zeolites have these unique properties, applications where zeolites are integrated into devices according to their application areas, are limited due to the powder form of the material. The purpose of the current study was to investigate the effect of zeolite nanoparticles on conductometric biosensor performance and cell viability measurements. Firstly, zeolite attachment on silicon surfaces was investigated by attaching silicalite and zeolite A nanoparticles onto the silicon substrates by direct attachment methodology in a closely packed monolayer form with perfect orientation and full coverage without using any chemical linker. Furthermore, the ability to pattern these zeolite crystals on silicon substrates with electron beam lithography and photolithography techniques was investigated. With the combination of electron beam lithography and direct attachment methodology, zeolite patterns were produced with feature sizes as small as a single silicalite nanoparticle thick line, that is approximately 500 nm. This approach has the ability of patterning very small features on silicon substrate, but the drawback is the long patterning time and lack of electron beam stability during long pattern formation process. Accordingly, it is almost impossible to form large patterns with electron beam lithography systems. Afterwards, to have full control on surfaces with differentiated areas on solid substrates, patterns of one type of zeolite crystals was formed on the monolayer of another type of zeolite layer with electron beam lithography for the first time. The same closed packed and highly oriented silicalite patterns were successfully formed on zeolite A monolayers and vice versa. Then photolithography technique was combined with direct attachment methodology to overcome the problem of the lack of total patterned area. With this technique, it was possible to pattern the whole silicon wafer in a couple of seconds, however the feature size of the zeolite patterns was limited with the infrastructures of the mask fabricated for photolithography studies. In this particular study, zeolite lines patterns with a minimum of 5 &micro / m thickness were prepared and the total patterned area was kept constant at 1 cm2. Similar to what was obtained by electron beam lithography study, zeolite A patterns were formed on silicalite monolayers with the minimum feature size of 5 &micro / m and vice versa. In the second part of the study, zeolite films were prepared on the transducers of conductometric biosensors using dip coating technique and named as Zeolite Coated Transducers (ZCT). Electrodes prepared using a mixture of zeolite and enzyme solution and then subjected to casting using glutaraldehyde were called Zeolite Membrane Transducers (ZMT). The operational and storage stabilities were determined to be in an acceptable range using ZCTs for conductometric urea biosensors. It was observed that using electrodes fabricated by the ZCT technique enhanced the biosensor signals up to two times and showed a rapid response after the addition of urea to the medium when it was compared with Standard Membrane Transducers (SMT). This enhancement can be explained by the lack of GA layer on top of the film, which acts as a diffusion barrier and inhibits the activity of the enzyme. On the second part of this conductometric biosensor study, effect of zeolite modification with methyl viologen (MV) and silver nanoparticles (Ag+ and Ag0), as well as the effect of changing Si/Al ratio was investigated with three different zeolite Beta particles which have Si/Al ratios of 40, 50, and 60. There were no significant effect of MV modification on ZMTs and there was no response observed with Ag+ and Ag0 modified zeolites. However, it was observed that conductometric responses increased with increasing Si/Al ratio for ZMTs. This behavior can be due to an increased hydrophobicity and/or the increasing acidic strength with the increasing Si/Al ratio within the zeolite crystals. Also ZCTs showed higher responses with respect to both SMTs and ZMTs. When compared with SMTs and ZMTs, ZCTs had higher reproducibility due to the controlled thickness of zeolite thin film by dip coating, and the controlled amount of enzyme adsorbed on this film. In the third part of the study, effect of zeolites on cell proliferation with MG63 osteoblast cells and NIH3T3 fibroblast cells were investigated. For that purpose, zeolite A, silicalite, and calcined forms of these zeolites were patterned with photolithography technique onto silicon wafers. Three different patterns prepared for this particular study, which has 0.125cm2, 0.08825cm2, and 0.04167cm2 zeolite patterned areas on 1 cm2 samples. In that way, not only the zeolite type and effect of calcination of zeolites, but also the effect of zeolite amount on MG63 osteoblast cells and NIH3T3 fibroblast cells were investigated. Silicalite coated samples were observed to have higher amount of cells than zeolite A coated samples after 24, 48, and 72 hours of incubation. This may be referred to the hydrophilic/hydrophobic properties, surface charge, and/or particle size of zeolites. Also it is observed that higher zeolite amount on samples resulted in an increase in the number of cells attached to the samples. There was also a significant increase in the number of cells upon using calcined silicalite samples. Accordingly, it can be hypothesized that zeolite pores result in an enhancement of protein adsorption and proliferation, even if this only occurs at the pore openings. On the other hand, there was no positive effect of calcining zeolite A. This result was expected since there is no structure directing agent used in synthesis procedure of zeolite A, which again supports the fact that pores might have some role in cell attachment.

農林水産研究情報センターで作成したPDFファイルを使用している。

No description available.

No description available.

Abstract The purpose of the thesis is the research of metallurgical properties , mechanical properties and texture analyses of four magnesium-based materials during E-beam welding process. After rapid solidification, the welding properties of fusion zone of four materials are very well without obvious defects and hot cracking. The Surface and depth of the weld of three Mg alloys has stable performance without sputter with Al content increasing.

In the paper, the beam propagation method is used to analyze the characteristics and the applications of nonlinear optical waveguide structures. The nonlinear optical waveguide is a medium whose refractive index changes with the electric field intensity. Based on the mode theory, the propagating envelop of optical light waves in the three-layers nonlinear waveguide with the nonlinear cladding, the nonlinear substrate and the linear guiding film can be solved. Not only the dispersion relation curve is described, but also the affection of input power to the electric field distribution is observed. In the application of nonlinear optical waveguide structure, the three-layers nonlinear waveguide structure and the local nonlinear Mach-Zehnder waveguide interferometer structure will be discussed: In the three-layers nonlinear waveguide structure, by launching the symmetric and antisymmetric modes, various characteristics of spatial optical solitons will be observed. Based on the interaction property between spatial optical solitons, a new all-optical 1¡ÑN switching device will be proposed; In the local nonlinear Mach-Zehnder waveguide interferometer structure, by fixing the input signal power and changing the control power, output signal beam will show the switching property. Besides, by changing the local nonlinear distributions, the nonlinear Mach-Zehnder interferometer will show various logic functions. The numerical results show that the proposed structures could function as all-optical switch devices and all-optical logic gates.