It is widely known that surfaces play an important role in numerous biological processes and technological applications. Thus, being able to modify surface properties provides an opportunity to control many phenomena occurring at interfaces. One way of controlling surface properties is to adsorb a polymer film onto the surface, for example through layer-by-layer (LbL) deposition of polyelectrolytes. This simple but versatile technique enables various polymers, proteins, colloidal particles etc. to be incorporated into the film, resulting in a multifunctional coating. Due to recent legislations and a consumer demand for more environmentally friendly products, we have chosen to use natural polymers (biopolymers) from renewable resources. The focus of this thesis has been on the adsorption of biopolymers and their layer-by-layer formation at solid-liquid interfaces; these processes have been studied by a wide range of techniques. The main method was the quartz crystal microbalance with dissipation monitoring (QCM-D), which measures the adsorbed mass, including trapped solvent and the viscoelastic properties of an adsorbed film. This technique was often complemented with an optical method, such as ellipsometry or dual polarization interferometry (DPI), which provided information about the “dry” polymer or protein adsorbed mass. From this combination, the solvent content and density of the layers was evaluated. In addition, the surface force apparatus (SFA), X-ray photoelectron spectroscopy (XPS), total internal reflection fluorescence (TIRF), and fluorescence resonance energy transfer (FRET) were utilized, providing further information about the film structure, chemical composition, and polymer inter-layer diffusion. Adsorption studies of the glycoprotein mucin, which has a key role in the mucousal function, showed that despite the net negative charge of mucin, it adsorbed on negatively charged substrates. The adsorbed layer was highly hydrated and the segment density on the substrate was low. We showed the importance of characterizing the mucin used, since differences in purity, such as the presence of albumin, gave rise to different adsorption behaviours in terms of both adsorbed amount and structure. The adsorbed mucin layer was to a large extent desorbed upon exposure to the anionic surfactant sodium dodecyl sulfate (SDS). In order to prevent desorption, we demonstrated that a protective layer of the cationic polysaccharide chitosan could be adsorbed onto the mucin layer and that the mucin-chitosan complexes resisted the desorption normally induced by association with SDS. Moreover, the association between chitosan and SDS was examined at the solid-liquid interface, in the bulk, and at the air-water interface. In all these environments chitosan-SDS complexes were formed and a net charge reversal of the complexes from positive to negative was observed when the concentration of SDS was increased. Furthermore, the LbL deposition method could be used to form a multilayer-like film by alternate adsorption of mucin and chitosan on silica substrates. The LbL technique was also applied to two proteins, lysozyme and β-casein with the aim of building a multilayer film consisting entirely of proteins. These proteins formed complexes at the solid-liquid interface, resulting in a proteinaceous layer, but the build-up was highly irregular with an increase in adsorbed amount per protein deposition cycle that was far less than a monolayer.Continuing with chitosan, known to have antibacterial properties we assembled multilayers with an anti-adhesive biopolymer, heparin, to evaluate the potential of this system as a coating for medical implants. Multilayers were assembled under various solution deposition conditions and the film structure and dynamics were studied in detail. The chitosan-heparin film was highly hydrated, in the range 60-80 wt-% depending on the deposition conditions. The adsorbed amount and thickness of the film increased exponential-like with the number of deposition steps, which was explained by inter-diffusion of chitosan molecules in the film during the build-up. In a novel approach, we used the distant dependent FRET technique to prove the inter-layer diffusion of fluorescent-labelled chitosan molecules within the film. The diffusion coefficient was insignificantly dependent on the deposition pH and ionic strength, and hence on the film structure. With the use of a pH sensitive dye buried under seven chitosan-heparin bilayers, we showed that the dye remained highly sensitive to the charge of the outermost layer. From complementary QCM-D data, we suggested that an increase in the energy dissipation does not necessarily indicate that the layer structure becomes less rigid. / Det är välkänt att ytor spelar en viktig roll i många biologiska processer och tekniska tillämpningar. Att kunna modifiera en ytas egenskaper ger därför en möjlighet att kunna kontrollera många fenomen som sker på ytor. Ett sätt att kontrollera ytegenskaperna är genom att adsorbera en polymerfilm på ytan, till exempel genom att växelvis adsorbera olika polyelektrolyter (LbL-teknik). Denna enkla men mångsidiga teknik möjliggör att många olika material kan införlivas i filmen, vilket resulterar i en multifunktionell beläggning. På grund av dagens lagstiftning och konsumenters ökade efterfrågan på miljövänliga material beslutade vi oss för att använda biologiska polymerer (biopolymerer) i detta projekt. Fokus i den här avhandlingen har varit på adsorption av biopolymerer och deras LbL-formation på gränsytan vätska-fast fas, där adsorptionsförloppet och det adsorberade skiktet bestående av biopolymerer studerats med en mängd olika tekniker. Huvudtekniken var kvartskristallmikrovåg med energidissipations-registrering (QCM-D), som mäter massan inklusive inkorporerat vatten, samt de viskoelastiska egenskaperna hos ett adsorberat skikt. Som komplement till denna teknik användes ofta optiska metoder, till exempel ellipsometri och ”dubbel polarisationsinterferometri (DPI)”, två tekniker som endast mäter massan av de adsorberade biopolymererna. Genom denna kombination av metoder kunde massan av inkorporerat vatten i filmen och filmens densitet bestämmas. Dessutom användes ytkraftsapparaten (SFA), röntgenfotoelektronspektrometri (XPS), och fluorescens-spektroskopiteknikerna TIRF och FRET i några undersökningar för att erhålla information om skiktens struktur, kemiska sammansättning och polymerernas diffusion inom skiktet.Adsorptionsstudier av glycoproteinet mucin, som har en central roll i funktionen av slemhinnan, avslöjade att trots att mucinet har en negativ nettoladdning adsorberade det ändå på negativt laddade substrat. Det adsorberade lagret var väldigt hydratiserat och hade en låg andel mucin i direkt kontakt med ytan. Vi påvisade vikten av att noga undersöka mucinet som användes, eftersom olika renhet, till exempel i form av förekomsten av albumin gav upphov till olika adsorptionsbeteende gällande både adsorberad mängd och struktur. En stor andel av det adsorberade mucinlagret desorberade när det exponerades för den anjoniska tensiden natriumdodecylsulfat, SDS. Vi visade att ett skyddande lager av den katjoniska polysackariden chitosan kunde adsorberas på mucinet och att mucin-chitosan-komplexen inte desorberade när SDS tillsattes. Därtill studerades växelverkan mellan chitosan och SDS på gränsytan vätska-fast fas, i bulken och på luft-vattengränsytan. Komplex av chitosan-SDS bildades i samtliga miljöer och en nettoladdningsomsvängning från positiv till negativ observerades när koncentrationen av SDS ökades.Vidare kunde LbL-tekniken nyttjas för att skapa ett multilagerlikt skikt genom att alternerande adsorbera mucin och chitosan på kiseldioxidsubstrat. Denna teknik användes även med två proteiner, lysozym och β-kasein, med målet att skapa ett multilager bestående av endast proteiner. Dessa proteiner bildade komplex på gränsytan vätska-fast fas i form av ett blandat proteinlager, men uppbyggnaden var väldigt oregelbunden med en ökning i adsorberad mängd per proteindeponeringscykel som var avsevärt mindre än ett monolager.Inom området för biomaterial utgör de antibakteriella och antihäftande egenskaperna hos chitosan respektive heparin en lovande blandning för beläggningar av medicinska implantat. Baserat på detta konstruerade vi multilagerfilmer av chitosan och heparin med olika deponeringslösningar och undersökte dynamiken och filmens struktur i detalj. Chitosan-heparin-filmen var starkt hydratiserad, bestående av cirka 60-80 vikt-% vatten beroende på deponeringsbetingelserna. Den adsorberade mängden och tjockleken på filmen ökade nästan exponentiellt med antal deponeringar, vilket förklarades med chitosanets förmåga att diffundera genom filmen under uppbyggnaden. Med ett nytt angreppssätt använde vi FRET för att bevisa diffusionen av fluorescerande färgmärkt chitosan i filmen under uppbyggnaden. Diffusionskoefficienten var i princip oberoende av pH och jonstyrka under deponeringen och följaktligen av filmens struktur. Genom att använda ett pH-känsligt färgämne begravt under sju biskikt av chitosan-heparin visade vi att färgämnet i hög grad påverkades av laddningen på det yttersta lagret. Från QCM-D-data lade vi fram teorin om att en ökning av energidissipationen för ett lager inte nödvändigtvis indikerar att lagrets struktur har blivit mindre styvt. / QC 20100729

Les nanotechnologies sont en train de révolutionner le domaine biomédical et plus particulièrement l’ingénierie tissulaire. Elles permettent aujourd’hui, non seulement de réparer mais aussi de régénérer les tissus. Cette nanomédecine régénérative est particulièrement adaptée pour répondre aux besoins importants liés aux maladies dégénératives, au vieillissement et aux traumatismes.Mon travail de thèse s’inscrit dans ce contexte et concerne l’élaboration de biomatériaux nanofibreux et microporeux actifs pour la régénération osseuse. Notre objectif essentiel est de réaliser un implant biodégradable nanostructuré permettant d’accélérer la réparation du tissu osseux. Notre stratégie innovante repose non seulement sur la mise en oeuvre de membranes par électrospinning mais aussi sur leur fonctionnalisation par des facteurs de croissance. Cette fonctionnalisation originale a consisté à enrober ces principes actifs dans des nanoréservoirs en utilisant la technique multicouche de polyélectrolytes. Des membranes de polycaprolactone (PCL) nanofibreuses et microporeuses ont été obtenues par électrospinning puis les fibres ont été enrobées de réservoirs contenant le facteur ostéoinducteur, la protéine morphogénique osseuse 2 (BMP-2). L’induction osseuse engendrée par ces réservoirs actifs a été mise en évidence in vitro après culture d’ostéoblastes humains primaires. Des expérimentations in vivo chez la souris ont permis de confirmer l’accélération de la régénération osseuse grâce à ces nanoréservoirs.Cette même stratégie a été validée in vivo, chez la souris, en utilisant des membranes de collagène d’origine animal commerciales utilisées en clinique. L’activité de ces membranes fonctionnalisées par des nanoréservoirs de BMP-2 est en cours d’analyse dans le cadre de tests précliniques pour une application maxillofaciale et parodontale. / Nanobiotechnology enables the emergence of entirely new classes of bioactive devices intended for targeted intracellular delivery for more efficiency and less toxicities. Tissue engineering is an interdisciplinary field that has attempted to implement a variety of processing methods for synthetic and natural polymers to fabricate tissue and organ regeneration scaffolds.We report here the first demonstration of bone regeneration by using a strategy based on a synthetic nanostructured membrane. This electrospun membrane is manufactured by using a FDA approved polymer, PCL, (polycaprolactone), and functionalized with nanoreservoirs of a growth factor (BMP-2). Our expected outcomes are the development of clinical applications in the field of tissue engineering and nanomedecine and particularly in bone regeneration.We propose the development of smart nanostructured active implants for regenerative medicine. Our strategycombines a synthetic biodegradable electrospun nanofibrous membrane based on PCL and a bioactive growth factor (BMP-2) entrapped into polymer nanoreservoirs built atop the nanofibers according to the layer-by-layer technology. In this study, by using primary osteoblasts, we have shown the capacity of these sophisticated implants to promote and accelerate not only in vitro bone induction; but also, in vivo, bone formation (mouse model).We have also validated our strategy, in vivo (mouse model), by using an already used in the clinic collagen membrane (animal origin) to accelerate bone regeneration. This unique strategy is used to entrap, protect and stabilize the therapeutic agent into polymer coating acting as nanoreservoirs enrobing fibers of membranes.

The electrostatic layer-by-layer (LbL) self-assembly of polyelectrolyte’s has shown applications in thin film coatings, micro patterning, nano-bioreactors and capsules for drug delivery. The film architecture can be precisely designed and controlled to nanometer scale precision with a range from 5 nm to a few microns. Both in vitro and in vivo studies indicate potential applications in biology, pharmaceutics, medicine, and other biomedical areas. This thesis work focused on the design and development of protocols to fabricate polyelectrolyte multi-layer patterns on a variety of substrates such as glass, metals and plastics such as acrylic and polycarbonate. The micro-scale polyelectrolyte patterns have applications in the creation of DNA, protein or cell based microarrays. This work also demonstrated the use of polyelectrolyte multi-layers in the enhancement of fluorescence signals from fluorophore-tagged molecules captured within the multi-layers. In-situ measurements using Fiber Bragg Gratings were carried out to study the kinetics of adsorption and desorption of polyelectrolytes participating in the layer buildup process under different process environmental conditions.

Notre équipe a développé une stratégie innovante de fonctionnalisation d’implants nanofibreux synthétiques à base de nanoréservoirs actifs pour la médecine régénérative osseuse. Notre objectif essentiel est de proposer un implant synthétique, biodégradable, et nanostructuré permettant d’accélérer la réparation du tissu osseux. Ces nouveaux implants synthétiques représentent un choix alternatif aux membranes de collagène d’origine animale. Notre stratégie consiste à construire des nanoréservoirs de chitosane, contenant des facteurs ostéoinducteurs tels que la BMP-2 afin d’enrober les nanofibres de nos implants. L’implant synthétique et biomimétique a été conçu à partir du le poly(ε-caprolactone) (PCL),polymère biocompatible et biodégradable approuvé par la FDA, et élaboré grâce à la technique de l’electrospinning afin de mimer la matrice extracellulaire. L’optimisation de ce procédé a permis la mise en oeuvre d’implants d’épaisseurs différentes (jusqu’à 10mm). La double fonctionnalisation de l’implant a permis de le rendre bioactif et vivant en utilisant la combinaison de facteur de croissance et de cellules souches mésenchymateuses. L’efficacité de la double fonctionnalisation des implants de PCL a ainsi été mise en évidence par l’accélération de la régénération osseuse in vivo.L’activité de ces implants fonctionnalisés de nanoréservoirs bioactifs est en cours d’analyse dans le cadre de tests précliniques pour une application maxillo-faciale, parodontale et orthopédique en vu d’obtenir un marquage CE. De plus, une start-up (ARTiOS NanoMed) basée sur cette nanotechnologie a été crée. En conclusion, nous pensons que la technologie développée par notre laboratoire a permis une avancée dans le domaine de la régénération osseuse et que cette technologie présente un fort potentiel d’application en clinique. / Our team has developped a novel and unique strategy to functionnalize nanofibrous and synthetic implants based on active nanoreservoirs for bone regeneration. We propose a new synthetic biodegradable and nanostructured implant to accelarate restoration of bone tissue. These new implants could replace collagen membranes from animal origin. The nanoreservoirs are based on chitosan containing osteoinductive growth factors such as BMP-2. Poly(ε-caprolactone) (PCL) is a biodegradable and biocompatible polymer approved by FDA and has been used to produce the synthetic and biomimetic implants by electrospinning in order to mimic the bone extracellular matrix. Optimization of this process has allowed the elaboration of nanofibrous implants with different thicknesses reaching 10 mm. Using the combination of growth factors and mesenchymal stem cells in a double functionalization created a bioactive and living implant. This strategy has been validated in vitro and in vivo thanks to bone site implantation in murin model. Acceleration of bone regeneration in vivo has brought to light the efficiency of the double functionalization onto the PCL implants.The functionalized implants bioactivity is still currently in study for pre-clinical trials in order to obtain authorization for applications in maxillo-facial, parodontal, and orthopaedic fields. Moerover, astat-up (ARTiOS NanoMed) based on this nanotechnology has been founded.To conclude, we believe that our nanotechnology could lead to a new generation of engineered bone implants which has a great potential to be used in the clinic.

Ce travail de thèse a été consacré à l'élaboration d'un nouveau type de membranes de nanofiltration efficaces avec des propriétés améliorées (flux élevé et rétention élevée, et de bonnes propriétés mécaniques) en déposant un revêtement assemblé couche-par-couche (LbL) sur des supports poreux. Après avoir systématiquement étudié le mécanisme de croissance des films assemblés couche par couche des polyélectrolytes choisis et la relation entre les structures de ces films et les performances des membranes résultant, nous avons identifié avec succès les meilleures structures multicouches pour la construction de membranes de nanofiltration de référence avec des performances optimales. En outre, en prenant avantage de la technique LbL, nous avons introduit une couche de diffusion latérale assemblée soit de nanofibrilles de cellulose ou de nanotubes de carbone, qui permet d’augmenter le flux de 30% tout en conservant la même rétention par rapport à la membrane de référence. En plus, les films assemblés à base de chitosan et nanofibrils de cellulose ont montré une forte résistance à la traction allant jusqu’à 450 MPa et un module d’Young jusqu’à 50 GPa. / This thesis work was devoted to the development of a novel and efficient nanofiltration membrane with improved properties (high flux and high retention, good mechanical strength) by coating Layer-by-Layer (LbL) assembled films onto porous membrane support. After having systematically studied the growth mechanism of LbL-assembled films of chosen polyelectrolytes and the relationship between the structures of these films and the membrane performance of the resulting NF membranes, we successfully identified the best multilayer structures for constructing nanofiltration membranes (NF) of reference with optimal membrane performance. Furthermore, taking advantages of the LbL-assembly, we successfully introduced LbL-assembled lateral diffusion layer that is made of either cellulose nanofibrils or carbon nanotubes, which in turn led to membranes with 30% higher flux. In addition, the LbL-assembled films of chitosan and cellulose nanofibrils showed surprisingly strong tensile strength of up to 450 MPa and a high Young modulus of up to 50 GPa.

Le cisplatine est l’un des trois agents anticancéreux les plus utilisés en chimiothérapie contre les tumeurs solides. Cependant, les doses utilisées sont limitées par des effets secondaires importants et l’existence des résistances innées ou acquises vis-à-vis de cette drogue. Ce travail vise à augmenter l’index thérapeutique du cisplatine (réduire ses effets secondaires et augmenter son activité anti-tumorale). Pour cela des nanoparticules hautement chargées en cisplatine en couche par couche à base de nucléolipides ont été préparées. Les études physico-chimiques (TEM, DLS, XPS, microscopie à fluorescence, ICP-optique) ont révélé que les nanoparticules à double couche étaient plus stables en milieu biologique par rapport aux formulations en mono-couche. Les études biologiques réalisées sur deux lignées tumorales ovariennes (IGROV1 et SKOV3) ont montré que cette formulation améliore l’activité cytotoxique du cisplatine et inhibe le développement des résistances. L’étude du mécanisme d’action (internalisation, apoptose, génotoxicité, réplication de l’ADN) a confirmé que les nanoparticules à double couche augmentent le taux de cisplatine internalisé qui, une fois libéré dans les cellules, arrête la réplication de l’ADN et induit la mort cellulaire par apoptose. Aucune toxicité intrinsèque aux nano-objets n’est observée. Les études in vivo de ces nanoparticules à double couche après injection en intraveineuse de 5, 7 et 9 mg/Kg ont révélé que cette formulation augmente la dose maximale tolérée et présente une activité anti-tumorale vis-à-vis des lignées cellulaires PROb et GV1A1. Cette stratégie d’élaboration des nanoparticules en couche par couche de nucléolipides nous a permis d’insérer des PEG avec ou sans acide folique pour le ciblage et d’introduire une deuxième drogue lipophile, le paclitaxel. Les tests in vitro (cytotoxicité, internalisation) ont montré l’intérêt de ces modifications. / Cisplatin is one of the three most commonly used anticancer drugs in chemotherapy against solid tumors. However, the doses used are limited by significant side effects and the existence of resistance. The aim of this work is to increase the therapeutic index of cisplatin. For this purpose, highly charged nucleolipids nanoparticles “layer-by-layer” of cisplatin were prepared. The physico-chemical studies (TEM, DLS, XPS, ICP, Fluorescence microscopy) revealed that the bilayer nanoparticles were more stable in biological environment compared with mono-layer formulations. Biological studies carried in two ovarian carcinoma cells lines (IGROV1 and SKOV3) showed that this formulation enhances the cytotoxic activity of cisplatin and inhibits the development of resistance. The study of the mechanism of action (internalization, apoptosis, genotoxicity, DNA replication) demonstrated the nanoparticles with double layer increases the rate of cisplatin internalized then released into the cells, stops the replication of DNA and induces cell death by apoptosis. No intrinsic toxicity of nano-objects is observed. In vivo studies of these nanoparticles double layer after intravenous injection of 5, 7 and 9 mg/Kg in the rats showed this formulation increases the maximum tolerated dose and has an antitumor activity against PROb en GV1A1 cells lines. This strategy of developing layer-by-layer nucleolipids nanoparticles allows to insert PEG with or without folic acid for targeting and introducing second drug, a lipophilic paclitaxel. In vitro study (cytotoxicity, internalization) have shown the benefits of both modification.

O ácido politiofeno acético (PTAA) é um derivado do politiofeno bastante versátil. Sua solubilidade em alguns solventes orgânicos e em soluções básicas aquosas lhe confere extensa processabilidade na forma de filmes finos, característica importante para dispositivos e sensores. Neste trabalho, investigou-se a formação de filmes de PTAA com as técnicas de automontagem e Langmuir-Blodgett (LB). Os filmes automontados foram preparados com dois policátions, hidrocloreto de poli-alilamina (PAH) e cloreto de poli-dialildimetilamônio (PDAC). O crescimento dos filmes depende do pH das soluções e do tipo de policátion, sugerindo dependência do mecanismo de crescimento com as interações específicas polímeropolímero. A conformação do PTAA em filme tem correlação com sua conformação em solução, apontando para um efeito de memória. Por outro lado, a energia de superfície destes filmes não sofre influência da arquitetura nem dessas diferenças conformacionais. Ou seja, embora o volume do filme possa ser distinto, as superfícies possuem propriedades semelhantes. A morfologia dos filmes foi caracterizada a partir de imagens de AFM utilizando conceitos de geometria fractal e estatística. A dimensão fractal dos filmes é semelhante, indicando o mesmo processo de crescimento dos filmes, independentemente das condições da deposição. Os filmes obtidos em pH ácido tinham tamanho de grão e comprimentos de correlação maiores, sugerindo a deposição de cadeias mais enoveladas. Foi possível fabricar filmes autossustentados sem degradação aparente do material a partir de filmes automontados de PAH/PTAA, entrecruzando termicamente os grupos ácido carboxílico e amina. Este é o primeiro relato de filmes deste tipo com derivado do politiofeno. Os filmes LB de PTAA foram obtidos sem adjuvantes, mas as condições de deposição precisam ser aprimoradas. Para explorar a elevada afinidade química entre compostos contendo enxofre e metais pesados, filmes foram utilizados para detecção espectroscópica e eletroquímica. Espectros de fotoluminescência e UV-Vis demonstraram que os metais interagem apenas com os estados excitados resultando na supressão da fluorescência; no entanto, sem especificidade e apenas para longos períodos de exposição. Espectros de FTIR mostraram a presença dos sais na matriz dos filmes. Por sua vez, voltametrias cíclicas permitiram detectar Pb+2 e Hg+2, mas a irreversibilidade dos processos eletroquímicos, causando alargamento dos picos de oxirredução, inviabiliza a detecção simultânea. / Polythiophene acetic acid (PTAA) is a versatile polythiophene derivative. Its solubility in some organic solvents and in basic aqueous solutions makes it attractive for processing thin films, an important feature for the fabrication of devices and sensors. In this thesis, we investigate the formation of PTAA films using the layer-by-layer (LbL) and the Langmuir- Blodgett (LB) techniques. The LbL films were prepared with poly(allylamine hydrochloride) (PAH) and poly(diallydimethylammonium chloride) (PDAC), with film growth depending on the pH of the solutions and type of polycation, thus indicating that the growth mechanism depends on polymer-polymer interactions. The conformation of the PTAA molecules in solid state was correlated with that in solution, in a kind of memory effect. The surface energy of the films was not affected by the film architecture or different conformations. The film morphology was characterized with AFM images using concepts of fractal geometry and statistics. The fractal dimension was similar for all films, and therefore the overall growth obeys the same process regardless of the deposition conditions. Nevertheless, films obtained at acidic pH exhibited larger grain size and correlation lengths than those produced at basic pHs, suggesting deposition of more coiled chains. It was also possible to fabricate selfsustained films without apparent PTAA degradation from the PAH/PTAA LbL films, upon thermal crosslinking of carboxylic acid and amine groups. This is the first report of such films with a polythiophene derivative. LB films of PTAA were obtained without co-spreading materials, but the deposition conditions need to be optimized. To explore the high chemical affinity between PTAA and compounds containing sulfur and heavy metals, some films were used for spectroscopic and electrochemical detection. The UV-Vis and photoluminescence spectra indicated that the metals affect only the excited states, leading to fluorescence quenching after long exposure times and without specificity for the metals. The FTIR spectra pointed to salts in the films. Pb+2 and Hg+2 ions could be detected using cyclic voltammetry, but their simultaneous detection was hampered by the irreversibility of the electrochemical processes which caused broadening of the oxi-reduction peaks.

This diploma thesis is devided into theoretic and practice parts. Theoretic part contains basic information about history and development of Artificial Neural Networks (ANN) from last century till present. Prove of the theoretic section is discussed in the practice part, for example learning, training each types of topology of artificial neural networks on some specifics works. Simulation of this networks and then describing results. Aim of thesis is simulation of the active networks element controlling by artificial neural networks. It means learning, training and simulation of designed neural network. This section contains algorithm of ports switching by address with Hopfield's networks, which used solution of typical Trade Salesman Problem (TSP). Next point is to sketch problems with optimalization and their solutions. Hopfield's topology is compared with Recurrent topology of neural networks (Elman's and Layer Recurrent's topology) their main differents, their advantages and disadvantages and supposed their solution of optimalization in controlling of network's switch. From thesis experience is introduced solution with controll function of ANN in active networks elements in the future.

Construed bachelor work features into problems hydrogen fuel articles and survey on low-temperature fuell elements with polymeric electrolyte (PEMFC). Basic sight work is study feature catalyzers on base MnOx on real fuel cell type PEMFC. Exit are then measured characteristic this way creation fuel cell.

Ce travail est consacré à la synthèse de nouveaux polymères donneurs de liaison Hydrogène et à leur utilisation comme partenaire dans la construction de nouveaux films multicouches préparés par le procédé d’élaboration en couche-par-couche (LbL). Plus particulièrement, une nouvelle réaction impliquant des mercaptoalcools non protégés et le poly(2,3,4,5,6-pentafluorostyrène) (PPFS) a été développé et appliquée à la synthèse de nouveaux polymères donneurs de liaisons H. Ce couplage régiosélectif et chimiosélectif de type « click » avec un thiol hétérofonctionnel peut être utilisée pour préparer une bibliothèque de polymères qui diffèrent de par leur degré de substitution (DS) et/ou leur fonctionnalité en groupements associatifs. Le contrôle de ces paramètres structuraux permet de moduler leur force d’interactions avec des partenaires accepteurs de liaison H variés, comme la poly(4-vinyl pyridine) (P4VP), le poly(acrylate de n-butyle) (PBA) et le poly(oxyde d'éthylène) (PEO), de telle façon que tous les types de mélanges binaires (mélange non miscible, partiellement ou totalement miscible, ou complexe interpolymère) peuvent être obtenus. Ensuite, les dérivés de PPFS donneurs de liaisons H ont été utilisés en partenariat avec le P4VP pour élaborer avec succès de nouveaux films multicouche dont la force motrice est l’établissement de liaisons H. L'influence de nombreux paramètres relatifs à la structure des polymères donneurs (DS, structure chimique du groupement associatif), au type de modification chimique subie par le substrat sur lequel est élaboré le film multicouche (monocouche auto-assemblée vs. polymère greffée en conformation de type brosse) ou encore des paramètres expérimentaux liés aux conditions de dépôt (concentration des solutions de dépôt, nature du partenaire adsorbé en premier) a été étudiée. Plus particulièrement, le mécanisme de croissance ainsi que les caractéristiques de surface du film ont été évalués. / This work deals with the design of novel hydrogen-bond donor polymers and their use as partner in new tailor-made multilayered films prepared by the layer-by-layer (LbL) process. In this context, a novel regioselective and chemoselective “click-type” reaction of unprotected mercaptoalcohols onto poly(2,3,4,5,6-pentafluoro-styrene) (PPFS) has been developed, and applied to the synthesis of new hydroxylated H-bond donor polymers. This coupling with heterofunctional thiol is used to prepare a library of polymers differing in the degree of substitution (DS) and/or functionality. The fine control of these parameters makes it possible to tune their interaction ability with various acceptor polymers such as poly(4-vinyl pyridine) (P4VP), poly(n-butyl acrylate) (PBA) and poly(ethylene oxide) (PEO), such that all possible scenarios (immiscible blend, partially or totally miscible blend or interpolymer complex) can be achieved. Subsequently, the resulting H-bond donor polymers (PPFS derivatives) were used to successfully build-up multilayered films with using P4VP as partner via layer-by-layer (LbL) through the dip deposition process. The influence of various parameters related to structure of the partners (DS, nature of the PPFS derivatives), the chemical structure of the surface onto which the film is built-up (self-assembled monolayer vs. polymer brush) and the deposition process (concentration of deposition solutions, nature of the first deposited partner) was in-depth evaluated, on both the growth mechanism and on the surface features of the multilayered films.