<p>The dissertation is a study of the poetics of haikai in eighteenth-century Japan. It is more specifically concerned with the works of Yosa Buson and some of his followers. Rather than being a study of certain poems, it is an investigation of theories of aesthetics and composition, and of criticism. Most studies of haikai focus on the short haiku (or hokku) form, but the present study is more concerned with the core form of this poetry, the long chains of verses called "renku" or "haikai no renga".</p><p>One important object of this study is to challenge some of the established views of haikai found in modern scholarship. For this purpose, many standpoints of haikai theory have been found useful, since they often approach questions of interpretation from new and unexpected angles. Theoretical stances that stress convention and traditionalism are criticized and the spirit of haikai is found to be more in concord with theories of cognitive poetics.</p><p>The dissertation consists of three parts. The first is a study of general haikai theory. In this part are discussed theories of aesthetics, theories of creativity, and a few questions related to the interpretation of this kind of poetry. This discussion focuses on those questions that are central in Buson’s own writing on poetics and puts them into a broader context.</p><p>The second part deals with practical theories of renku composing. An introductory chapter gives a historical background to many concepts used in Buson’s age, and this is followed by a full translation and critical study of a renku treatise written by his disciple Takai Kitō.</p><p>The last part is an investigation of modern criticism written on Buson’s renku. All existing full-length studies of these poems are discussed in comparison. The absence of a long critical tradition concerning Buson’s renku has, in many cases, prevented the formation of established interpretations, and this is ideal for a study of this kind.</p>

Stories, themes, concepts and references are organized structurally and purposefully in most books. A person reading a book needs to understand themes and concepts within the context. Schank’s Dynamic Memory theory suggested that building on existing memory structures is essential to cognition and learning. Pirolli and Card emphasized the need to provide people with an independent and improved ability to access and understand information in their information seeking activities. Through a review of users’ reading behaviours and of existing e-Book user interfaces, we found that current e-Book browsers provide minimal support for comprehending the content of large and complex books. Readers of an e-Book need user interfaces that present and relate the organizational and narrative structures, and moreover, reveal the thematic structures. This thesis addresses the problem of providing readers with effective scaffolding of multiple structures of an e-Book in the user interface to support reading for comprehension. Recognising a story or topic as the basic unit in a book, we developed novel story segmentation techniques for discovering narrative segments, and adapted story linking techniques for linking narrative threads in semi-structured linear texts of an e-Book. We then designed an e-Book user interface to present the complex structures of the e-Book, as well as to assist the reader to discover these structures. We designed and developed evaluation methodologies to investigate reading and comprehension in e-Books, in order to assess the effectiveness of this user interface. We designed semi-directed reading tasks using a Story-Theme Map, and a set of corresponding measurements for the answers. We conducted user evaluations with book readers. Participants were asked to read stories, to browse and link related stories, and to identify major themes of stories in an e-Book. This thesis reports the experimental design and results in detail. The results confirmed that the e-Book interface helped readers perform reading tasks more effectively. The most important and interesting finding is that the interface proved to be more helpful to novice readers who had little background knowledge of the book. In addition, each component that supported the user interface was evaluated separately in a laboratory setting and, these results too are reported in the thesis.

Une nouvelle notion d'enlacement pour les paires d'ensembles $A\subset B$, $P\subset Q$ dans un espace de Hilbert de type $X=Y\oplus Y^{\perp}$ avec $Y$ séparable, appellée $\tau$-enlacement, est définie. Le modèle pour cette définition est la généralisation de l'enlacement homotopique et de l'enlacement au sens de Benci-Rabinowitz faite par Frigon. En utilisant la théorie du degré développée dans un article de Kryszewski et Szulkin, plusieurs exemples de paires $\tau$-enlacées sont donnés. Un lemme de déformation est établi et utilisé conjointement à la notion de $\tau$-enlacement pour prouver un théorème d'existence de point critique pour une certaine classe de fonctionnelles sur $X$. De plus, une caractérisation de type minimax de la valeur critique correspondante est donnée. Comme corollaire de ce théorème, des conditions sont énoncées sous lesquelles l'existence de deux points critiques distincts est garantie. Deux autres théorèmes de point critiques sont démontrés dont l'un généralise le théorème principal de l'article de Kryszewski et Szulkin mentionné ci-haut. / A new notion of linking for pairs of sets $A\subset B$, $P\subset Q$ in a Hilbert space of the form $X=Y\oplus Y^{\perp}$ with $Y$ separable, called $\tau$-linking, is defined. The model for this definition is the generalization of homotopical linking and linking in the sense of Benci-Rabinowitz made by Frigon. Using the degree theory developped in an article of Kryszewski and Szulkin, many examples of $\tau$-linking pairs are given. A deformation lemma is established and used jointly with the notion of $\tau$-linking to prove an existence theorem for critical points of a certain class of functionals defined on $X$. Moreover, a characterization of a minimax nature for the corresponding critical value is given. As a corollary of this theorem, conditions are stated under which the existence of two distinct critical points is guaranteed. Two other critical point theorems are demonstrated, one of which generalizes the main theorem of the article of A new notion of linking for pairs of sets $A\subset B$, $P\subset Q$ in a Hilbert space of the form $X=Y\oplus Y^{\perp}$ with $Y$ separable, called $\tau$-linking, is defined. The model for this definition is the generalization of homotopical linking and linking in the sense of Benci-Rabinowitz made by Frigon~\cite{frigon:1}. Using the degree theory developped in~\cite{szulkin:1}, many examples of $\tau$-linking pairs are given. A deformation lemma is established and used jointly with the notion of $\tau$-linking to prove an existence theorem for critical points of a certain class of functionals defined on $X$. Moreover, a characterization of a minimax nature for the corresponding critical value is given. As a corollary of this theorem, conditions are stated under which the existence of two distinct critical points is guaranteed. Two other critical point theorems are demonstrated, one of which generalizes the main theorem of the article by Kryszewski and Szulkin cited above.

DCL-1 (CD302) is a type I transmembrane C-type lectin receptor, which is expressed on monocytes, macrophages, granulocytes and dendritic cells. However, its extracellular domain lacks the amino acids motives essential for carbohydrate binding in the presence of calcium ions, suggesting that it does not have the classic binding capacity found in other C-type lectin receptors such as the mannose receptor. No exogenous or endogenous ligands have been identified yet, though. Due to internal colocalization with F-actin we can assume, that this unconventional lectin receptor plays a role not only in endocytosis and phagocytosis but also in the cell adhesion and migration. The receptor DCL-1 was first identified as a genetic fusion partner of human DEC-205 multilectin receptor in Hodgkin's lymphoma cell lines. The experimental part of this thesis deals with the characterization of disulfide bonds and data acquisition for validation of DCL-1 crystal structure. First the production and refolding conditions were optimized to obtain the highest amount of DCL-1 protein, precisely its extracellular domain. These optimal conditions were used to prepare the protein for in-gel digestion using specific endopeptidases in the presence of cystamine followed by LC-MS analysis. DCL-1 disulfide bonds were determined by comparing...

[pt] Esta pesquisa propõe uma nova forma de análise dos verbos de ligação em Língua Portuguesa. A Gramática Tradicional considera que este grupo de verbos possui apenas uma função sintática, sem atenção ao seu significado. Na verdade, os verbos de ligação e seus complementos constituem uma expressão por si só significativa. Esta característica nos permite compará-los aos verbos-suporte, já que eles têm o mesmo tipo de comportamento. / [en] This research proposes a new way of analising verbos de ligação (copulae) in Portuguese. Traditional Grammar considers this group of verbs as having a purely syntactic function, paying no attention to their meaning. In fact, these verbs and their complements constitute an expression with meaning of its own. This characteristic enables us to compare verbos de ligação to light verbs, since they have the same kind of behavior.

A comprehensive understanding of physiological role of proteins requires knowledge of their three-dimensional structure, dynamics and protein-protein interactions. Chemical cross-linking in combination with mass spectrometry represents an alternative approach to standard methods for protein structure elucidation (X-ray crystalography, NMR spectroscopy) and enables characterization of interaction interface within protein complexes in their native states. The presented thesis is mainly focused on novel cross-linking methodology based on the in vivo incorporation of methionine analog with photo-reactive functional group (photo-Met) into the sequence of studied protein (so called protein photo-nanoprobe). Interaction between two molecules of 14-3-3zeta protein was used as a model to test and optimize the protein photo-nanoprobe production. The findings confirmed usefulness of this approach for mapping the protein-protein interactions. The photo-initiated cross-linking was used to detect the heterooligomeric membrane structures of cytochromes P450 2B4 and b5 and the molar ratio of cytochromes within individual complexes was assessed. The chemical cross-linking in combination with mass spectrometry was employed to characterize the interaction of their catalytic domains and two mutual orientations of...

As espumas de polietileno são amplamente utilizadas. Suas aplicações vão de aparelhos domésticos a artefatos médicos, incluindo aplicações nas indústrias de construção civil e automobilística. As propriedades das espumas dependem da densidade e da sua estrutura celular, em outras palavras, da quantidade de células abertas e fechadas, da distribuição e do tamanho das células. Os métodos de produção de espumas de polietileno reticulado são classificados em dois tipos, de acordo com o método de reticulação. Um dos métodos é a reticulação química, que utiliza peróxidos como agente reticulante, O outro método é a reticulação por irradiação, utilizando feixe de elétrons. As espumas obtidas a partir do polietileno reticulado pelo processo de irradiação apresentam superfície lisa e homogênea, e são formadas basicamente por células fechadas. O objetivo deste trabalho foi utilizar a radiação ionizante para a formação de ligações cruzadas entre as moléculas de polietileno de baixa densidade (LDPE), que permitiu a obtenção das espumas. As suas propriedades mecânicas, térmicas e morfológicas foram avaliadas. As amostras de polietileno com densidade de 0,946 g/cm3, contendo 5% de azodicarbonamida (ADCA), agente expansor, foram irradiadas com feixe de elétrons de alta energia com doses de radiação de 10, 20, 30, 40, 50, 60, 80 e 100 kGy. Após a irradiação, as amostras de LDPE foram colocadas em um forno para expansão térmica e formação das espumas. Foi determinado o grau de reticulação das espumas. Algumas amostras também foram envelhecidas termicamente. O desempenho mecânico das amostras de espumas foi avaliado por meio de ensaios de tração e deformação, dureza, deformação permanente por compressão e resiliência. Também foram realizados ensaios de termogravimetria (TGA) e de microscopia eletrônica de varredura (MEV). Os resultados mostraram que no intervalo de doses de radiação estudadas, a resistência à tração aumenta com o aumento do grau de reticulação. Nos ensaios de resistência à compressão, a partir da dose de radiação de 40 kGy, observou-se um decréscimo nos valores obtidos. Já a resiliência sofreu pouca aheração. De acordo com a análise morfológica pode-se concluir que a dose de radiação de 30 kGy foi a que promoveu a formação de espumas com estrutura celular fechada e mais homogênea. / The polyethylene foams are widely used. Their main applications are used for both home appliances to medical equipments. Beside that, they have applications in building and automotive industries. The foam properties depend on the density and its cellular structure, that is, the amount of open and closed cells, of the distribution and size of them. The methods of the crosslinking polyethylene foam production are classified in two types, according to the crosslinking method. One method is based on the chemical crosslinking, which utilizes peroxide as crosslinking agent. In the other method, the crosslinking is induced by electron beam radiation. The foams obtained from the crosslinking polyethylene by irradiation process presented a smooth and the homogeneous surface, and are formed basically by closed cells. The aim of this study was to apply the ionizing radiation from electron beam to crosslink low density polyethylene (LDPE), to obtain foams. Their morphological, thermal and mechanical properties were studied to evaluate the obtained samples. The samples of low density polyethylene (0,946 g/cm3), containing 5% of azodicarbonamide (ADCA), as expander agent, were irradiated with electron beam with doses of 10, 20, 30, 40, 50, 60, 80 and 100 kGy. After the irradiation, these LDPE samples were put into an oven to obtain the foams. It was determined the crosslinking degree of the foams. Some samples were also thermically aged. The mechanical performance of the foams samples was evaluated by means of the tensile strenght, compression, hardness, permanent deformation by compression and resilience. It was also carried out thermogravimetry and scanning electron microscopy (SEM). The results have shown that, in the interval of radiation doses studied, that the tensile strength increases with the increase of the crosslinking degree. The compression resistance results obtained from with samples with to radiation dose of 40 kGy showed significant decreasing. The resilience measurements have shown only little variations. According to the morphological analysis it can be concluded that foams with radiation dose of 30 kGy have closed cellular structure more homogeneous and smooth morphology.

As espumas de polietileno são amplamente utilizadas. Suas aplicações vão de aparelhos domésticos a artefatos médicos, incluindo aplicações nas indústrias de construção civil e automobilística. As propriedades das espumas dependem da densidade e da sua estrutura celular, em outras palavras, da quantidade de células abertas e fechadas, da distribuição e do tamanho das células. Os métodos de produção de espumas de polietileno reticulado são classificados em dois tipos, de acordo com o método de reticulação. Um dos métodos é a reticulação química, que utiliza peróxidos como agente reticulante, O outro método é a reticulação por irradiação, utilizando feixe de elétrons. As espumas obtidas a partir do polietileno reticulado pelo processo de irradiação apresentam superfície lisa e homogênea, e são formadas basicamente por células fechadas. O objetivo deste trabalho foi utilizar a radiação ionizante para a formação de ligações cruzadas entre as moléculas de polietileno de baixa densidade (LDPE), que permitiu a obtenção das espumas. As suas propriedades mecânicas, térmicas e morfológicas foram avaliadas. As amostras de polietileno com densidade de 0,946 g/cm3, contendo 5% de azodicarbonamida (ADCA), agente expansor, foram irradiadas com feixe de elétrons de alta energia com doses de radiação de 10, 20, 30, 40, 50, 60, 80 e 100 kGy. Após a irradiação, as amostras de LDPE foram colocadas em um forno para expansão térmica e formação das espumas. Foi determinado o grau de reticulação das espumas. Algumas amostras também foram envelhecidas termicamente. O desempenho mecânico das amostras de espumas foi avaliado por meio de ensaios de tração e deformação, dureza, deformação permanente por compressão e resiliência. Também foram realizados ensaios de termogravimetria (TGA) e de microscopia eletrônica de varredura (MEV). Os resultados mostraram que no intervalo de doses de radiação estudadas, a resistência à tração aumenta com o aumento do grau de reticulação. Nos ensaios de resistência à compressão, a partir da dose de radiação de 40 kGy, observou-se um decréscimo nos valores obtidos. Já a resiliência sofreu pouca aheração. De acordo com a análise morfológica pode-se concluir que a dose de radiação de 30 kGy foi a que promoveu a formação de espumas com estrutura celular fechada e mais homogênea. / The polyethylene foams are widely used. Their main applications are used for both home appliances to medical equipments. Beside that, they have applications in building and automotive industries. The foam properties depend on the density and its cellular structure, that is, the amount of open and closed cells, of the distribution and size of them. The methods of the crosslinking polyethylene foam production are classified in two types, according to the crosslinking method. One method is based on the chemical crosslinking, which utilizes peroxide as crosslinking agent. In the other method, the crosslinking is induced by electron beam radiation. The foams obtained from the crosslinking polyethylene by irradiation process presented a smooth and the homogeneous surface, and are formed basically by closed cells. The aim of this study was to apply the ionizing radiation from electron beam to crosslink low density polyethylene (LDPE), to obtain foams. Their morphological, thermal and mechanical properties were studied to evaluate the obtained samples. The samples of low density polyethylene (0,946 g/cm3), containing 5% of azodicarbonamide (ADCA), as expander agent, were irradiated with electron beam with doses of 10, 20, 30, 40, 50, 60, 80 and 100 kGy. After the irradiation, these LDPE samples were put into an oven to obtain the foams. It was determined the crosslinking degree of the foams. Some samples were also thermically aged. The mechanical performance of the foams samples was evaluated by means of the tensile strenght, compression, hardness, permanent deformation by compression and resilience. It was also carried out thermogravimetry and scanning electron microscopy (SEM). The results have shown that, in the interval of radiation doses studied, that the tensile strength increases with the increase of the crosslinking degree. The compression resistance results obtained from with samples with to radiation dose of 40 kGy showed significant decreasing. The resilience measurements have shown only little variations. According to the morphological analysis it can be concluded that foams with radiation dose of 30 kGy have closed cellular structure more homogeneous and smooth morphology.

Les nouvelles technologies sont de plus en plus demandeuses de sources de forte densité d’énergie respectueuses de l’environnement. Les accumulateurs lithium-ion semblent être la meilleure solution pour les applications mobiles et pour le domaine de l’automobile. Afin de répondre aux besoins en énergie de plus en plus importants, de nouveaux matériaux d’électrode négative sont nécessaires pour remplacer le carbone qui a désormais atteint son stade de maturité. En particulier, les composites silicium/carbone (Si/C) semblent être prometteurs pour augmenter la densité d’énergie des accumulateurs mais présentent de faibles rétentions de capacité au cours du cyclage. L’amélioration de la cyclabilité des composites Si/C fait l’objet de ce travail de thèse. La synthèse des composites par atomisation avec de l’alcool polyvinylique comme précurseur carboné suivie d’une pyrolyse est présentée. Les performances électrochimiques des matériaux résultants sont comparées à celles obtenues par d’autres composites, élaborés par lyophilisation et par broyage. Les propriétés intrinsèques des composites ont été modifiées par deux voies différentes afin d’améliorer leur cyclabilité. Dans un premiers temps, les effets de la réticulation de l’alcool polyvinylique ont été étudiés, puis ceux liés à l’ajout d’un catalyseur favorisant la graphitisation du carbone. La cyclabilité des composites Si/C peut également être améliorée en modifiant la nature du liant utilisé lors de la préparation des électrodes. L’intérêt bénéfique de l’emploi de l’acide polyacrylique en remplacement du fluorure de polyvinylidène couramment utilisé dans des électrodes à base de composites Si/C est démontré. / New technologies require more and more environment friendly sources of high energy density. Lithium-ion batteries seem to be the best solution for mobile and automotive applications. In order to meet the future energy requirements, new negative electrode materials are needed to replace carbon which has now reached a mature stage. Especially, silicon/carbon composites (Si/C) appear to be promising candidates to increase the energy density of batteries, but they still present poor capacity retention upon cycling. The improvement of Si/C composites cyclability is the subject of this thesis. The synthesis of Si/C composites by spray drying with polyvinyl alcohol as carbon precursor, followed by pyrolysis, is presented. The electrochemical performances are compared with those obtained for other composites, prepared by freeze drying and ball-milling. The intrinsic properties of the composites were modified in two different ways to improve their cyclability. First, we studied the effects of polyvinyl alcohol crosslinking, and then those related to the graphitization of carbon contained in these composites. The cyclability of Si/C composites can also be improved by changing the nature of the binder used during the electrodes preparation. The beneficial interest of using polyacrylic acid in replacement of polyvinylidene fluoride binder commonly used in Si/C based electrodes is shown.

Orientador: Josimeri Hebling / Resumo: Objetivo: Avaliar a estabilidade mecânica e a atividade proteolítica de interfaces produzidas pela apliação de um adesivo convencional simplificado sobre a dentina biomodificada e seca. Métodos: Superfícies planas de dentina coronária foram criadas em 64 molares hígidos. Os dentes foram divididos em 4 grupos de acordo com a solução aplicada sobre a dentina condicionada: extrato de semente de uva 5% (GSE), glutaraldeído 5% (GD), Gluma Desensitizer ou água (controle). As soluções foram aplicadas por 60s seguido de lavagem e secagem com papel absorvente. Os dentes foram então subdivididos em dois grupos, nos quais a dentina condicionada foi mantida úmida ou foi seca com ar por 60s. O adesivo Optibond foi aplicado e em seguida foi construído um cilindro de resina. Decorridas 24h, os dentes foram cortados em espécimes (0,81 mm2 ), submetidos ao ensaio de microtração imediatamente ou após 12 meses de envelhecimento. Os mesmos procedimentos adesivos foram realizados em 32 dentes adicionais. Esses dentes foram seccionados em fatias de 0,5 mm de espessura, preparadas para os ensaios de nanoinfiltração e zimografia in situ (EnzChek). Os dados de resistência de união foram submetidos aos testes de ANOVA e Tukey (p<0,05), e os ensaios de nanoinfiltração e zimografia in situ foram apresentados descritivamente. Resultados: Redução significante da resistência de união imediata (ca. 65%) e aumento da atividade proteolítica e nanoilfiltração foi observado em interfaces produzidas sobre a dent... (Resumo completo, clicar acesso eletrônico abaixo) / Abstract: Objective: To evaluate the mechanical stability and the proteolytic activity of bonds created by a one-step, etch-and-rinse adhesive applied to cross-linked and air-dried etched dentin. Methods: Flat coronal dentin surfaces were produced in 64 sound molars. The teeth were divided into 4 groups according to the solution applied on the etched dentin: 5% grape seed extract, 5% glutaraldehyde, Gluma Desensitizer or deionized water (control). Solutions were applied for 60s followed by rinse and blot drying. Then, the teeth were separated into two subgroups: the etched dentin was kept moist or air dried for 60s. Optibond was applied followed by a composite resin buildup. After 24h, the teeth were cut into beams (0.81 mm²) which were microtensile tested immediately or after 12mo of storage. Additional teeth (n=32) were bonded as described and cut into 0.5 mm-thick slabs. The slabs were prepared for nanoleakage and in situ zymography analyses (EnzChek). Bond strength data were submitted to ANOVA and Tukey tests (p<0.05) while nanoleakage and zymography data were descriptively reported. Results: Significant reduction in bond strength (ca. 65%) and increase of the proteolytic activity was seen when the etched dentin was air-dried without previous biomodification. Conversely, bond strengths did not differ from those produced on wet dentin when collagen was cross-linked before air-drying, irrespective of the solution. For both moist and air-dried etched dentin, collagen cross-linking res... (Complete abstract click electronic access below) / Mestre