Les modèles de prévision opérationnelle du temps résolvent numériquement les équations de la mécanique des fluides en calculant l'évolution de champs (pression, température, humidité, vitesses) définis comme moyennes horizontales à l'échelle des mailles d'une grille (et à différents niveaux verticaux).<p><p>Les processus d'échelle inférieure à la maille jouent néanmoins un rôle essentiel dans les transferts et les bilans de chaleur, humidité et quantité de mouvement. Les paramétrisations physiques visent à évaluer les termes de source correspondant à ces phénomènes, et apparaissant dans les équations des champs moyens aux points de grille.<p><p>Lorsque l'on diminue la taille des mailles afin de représenter plus finement l'évolution des phénomènes atmosphériques, certaines hypothèses utilisées dans ces paramétrisations perdent leur validité. Le problème se pose surtout quand la taille des mailles passe en dessous d'une dizaine de kilomètres, se rapprochant de la taille des grands systèmes de nuages convectifs (systèmes orageux, lignes de grain).<p><p>Ce travail s'inscrit dans le cadre des développements du modèle à mailles fines ARPÈGE ALADIN, utilisé par une douzaine de pays pour l'élaboration de prévisions à courte échéance (jusque 48 heures).<p><p>Nous décrivons d'abord l'ensemble des paramétrisations physiques du modèle.<p>Suit une analyse détaillée de la paramétrisation actuelle de la convection profonde. Nous présentons également notre contribution personnelle à celle ci, concernant l'entraînement de la quantité de mouvement horizontale dans le nuage convectif.<p>Nous faisons ressortir les principaux points faibles ou hypothèses nécessitant des mailles de grandes dimensions, et dégageons les voies pour de nouveaux développements.<p>Nous approfondissons ensuite deux des aspects sortis de cette discussion: l'usage de variables pronostiques de l'activité convective, et la prise en compte de différences entre l'environnement immédiat du nuage et les valeurs des champs à grande échelle. Ceci nous conduit à la réalisation et la mise en œuvre d'un schéma pronostique de la convection profonde.<p>A ce schéma devraient encore s'ajouter une paramétrisation pronostique des phases condensées suspendues (actuellement en cours de développement par d'autres personnes) et quelques autres améliorations que nous proposons.<p>Des tests de validation et de comportement du schéma pronostique ont été effectués en modèle à aire limitée à différentes résolutions et en modèle global. Dans ce dernier cas l'effet du nouveau schéma sur les bilans globaux est également examiné.<p>Ces expériences apportent un éclairage supplémentaire sur le comportement du schéma convectif et les problèmes de partage entre la schéma de convection profonde et le schéma de précipitation de grande échelle.<p><p>La présente étude fait donc le point sur le statut actuel des différentes paramétrisations du modèle, et propose des solutions pratiques pour améliorer la qualité de la représentation des phénomènes convectifs.<p><p>L'utilisation de mailles plus petites que 5 km nécessite enfin de lever l'hypothèse hydrostatique dans les équations de grande échelle, et nous esquissons les raffinements supplémentaires de la paramétrisation possibles dans ce cas.<p><p> / Doctorat en sciences appliquées / info:eu-repo/semantics/nonPublished

Abstract The contemporary information age is equipped with rich and affordable telecommunication services. In the future, people have even more flexibility when true wireless Internet and real-time multimedia are provided seamlessly over heterogeneous wireless networks. Optimally combining the capacity and services of the current and emerging networks requires a holistic view of mobility, resource and service management. This thesis contributes to the research and development of these hybrid systems with three main contributions. Firstly, a system architecture for vertical handoff in location-aware heterogeneous wireless networks is proposed. The proposed architecture enables the mobile node to prepare for approaching vertical handoffs and wake-up a hotspot interface. The needed communication procedures are discussed, and inter-related issues of mobility and geolocation information are considered in proportion to usability, advantages and limitations. Secondly, a framework for the analysis of vertical handoff algorithm sensitivity to various mobility parameters including velocity, handoff delay and dwell time is introduced. Handoff smoothing with a dwell-timer is analyzed as one potential scheme for optimizing vertical handoff locally. It is compared to a power based algorithm to find out its sensitivity to the changes in effective data rates, velocity of the terminal and the amount of handoff delay. The analysis focuses on the transition region, having case studies on both moving-in and moving-out scenarios. An optimal value for dwell-timer is found through simulations, showing a performance gain over power based algorithm as a function of mean throughput. The analysis is extended also to a multiple network scenario. Thirdly, experimental results on the behaviour of protocols used in wireless IP networks are presented. Prototype systems demonstrate results of using Mobile IP with a fuzzy logic algorithm for vertical handoff in a heterogeneous network environment and the role of IPv6 when using a voice application in a wireless LAN environment. Latest contributions include developing plug-and-play middleware functionalities for Symbian mobile devices, extending the use of the earlier results to state-of-the-art mobile devices.

With the rapid adoption of multimedia network technologies, a number of companies and standards bodies are introducing technologies that enhance user experience in networked multimedia environments. These technologies focus on device discovery, connection management, control, and monitoring. This study focused on control and monitoring. Multimedia networks make it possible for devices that are part of the same network to reside in different physical locations. These devices contain parameters that are used to control particular features, such as speaker volume, bass, amplifier gain, and video resolution. It is often necessary for changes in one parameter to affect other parameters, such as a synchronised change between volume and bass parameters, or collective control of multiple parameters. Thus, relationships are required between the parameters. In addition, some devices contain parameters, such as voltage, temperature, and audio level, that require constant monitoring to enable corrective action when thresholds are exceeded. Therefore, a mechanism for monitoring networked devices is required. This thesis proposes relationships that are essential for the proper functioning of a multimedia network and that should, therefore, be incorporated in standard form into a protocol, such that all devices can depend on them. Implementation mechanisms for these relationships were created. Parameter grouping and monitoring capabilities within mixing console implementations and existing control protocols were reviewed. A number of requirements for parameter grouping and monitoring were derived from this review. These requirements include a formal classification of relationship types, the ability to create relationships between parameters with different underlying value units, the ability to create relationships between parameters residing on different devices on a network, and the use of an event-driven mechanism for parameter monitoring. These requirements were the criteria used to govern the implementation mechanisms that were created as part of this study. Parameter grouping and monitoring mechanisms were implemented for the XFN protocol. The mechanisms implemented fulfil the requirements derived from the review of capabilities of mixing consoles and existing control protocols. The formal classification of relationship types was implemented within XFN parameters using lists that keep track of the relationships between each XFN parameter and other XFN parameters that reside on the same device or on other devices on the network. A common value unit, known as the global unit, was defined for use as the value format within value update messages between XFN parameters that have relationships. Mapping tables were used to translate the global unit values to application-specific (universal) units, such as decibels (dB). A mechanism for bulk parameter retrieval within the XFN protocol was augmented to produce an event-driven mechanism for parameter monitoring. These implementation mechanisms were applied to an XFN-protocol-compliant graphical control application to demonstrate their usage within an end user context. At the time of this study, the XFN protocol was undergoing standardisation within the Audio Engineering Society. The AES-64 standard has now been approved. Most of the implementation mechanisms resulting from this study have been incorporated into this standard.

Topology design of distributed local area networks (DLANs) can be classified as an NP-hard problem. Intelligent algorithms, such as evolutionary and swarm intelligence techniques, are candidate approaches to address this problem and to produce desirable solutions. DLAN topology design consists of several conflicting objectives such as minimization of cost, minimization of network delay, minimization of the number of hops between two nodes, and maximization of reliability. It is possible to combine these objectives in a single-objective function, provided that the trade-offs among these objectives are adhered to. This thesis proposes a strategy and a new aggregation operator based on fuzzy logic to combine the four objectives in a single-objective function. The thesis also investigates the use of a number of evolutionary algorithms such as stochastic evolution, simulated evolution, and simulated annealing. A number of hybrid variants of the above algorithms are also proposed. Furthermore, the applicability of swarm intelligence techniques such as ant colony optimization and particle swarm optimization to topology design has been investigated. All proposed techniques have been evaluated empirically with respect to their algorithm parameters. Results suggest that simulated annealing produced the best results among all proposed algorithms. In addition, the hybrid variants of simulated annealing, simulated evolution, and stochastic evolution generated better results than their respective basic algorithms. Moreover, a comparison of ant colony optimization and particle swarm optimization shows that the latter generated better results than the former. / Thesis (PhD)--University of Pretoria, 2009. / Computer Science / unrestricted

The adoption of wireless broadband technologies to provide network and Internet connectivity in rural communities has conveyed the possibility to overcome the challenges caused by marginalization and many other characteristics possessed by these rural communities. With their different capabilities, these technologies enable communication for rural communities internally within the community and externally on a global scale. Deployment of these technologies in rural areas requires consideration of different factors - these are in contrast, to those considered when deploying these technologies in non-rural, urban areas. Numerous research show consideration of facts for deployment of broadband technologies in urban/ non-rural environments and a little has been done in considering facts for deployment in rural environments. Hence this research aims to define guidelines for selection of broadband technologies and make recommendations on which technologies are suitable for deployment in rural communities, thereby considering facts that are true only within these rural communities. To achieve this, the research determines the metrics that are relevant and important to consider when deploying wireless broadband technology in rural communities of South Africa. It further undertakes a survey of wireless broadband technologies that are suitable for deployment in such areas. The study first profiles a list of wireless communication technologies, determines and documents characteristics of rural communities in Africa, determines metrics used to declare technologies feasible in rural areas. The metrics and rural characteristics are then used to identify technologies that are better suited than others. Informed by this initial profiling, one technology: mobile WiMAX is then selected for deployment and further evaluation. A technical review of mobile WiMAX is then carried out by deploying it at our research site in the rural, marginalized community of Dwesa (Eastern Cape, South Africa). The final section of this research provides recommendations that mobile WiMAX, LTE and Wi-Fi are the best suitable technologies for deployment in rural marginalized environments. This has been supported by extensive research and real life deployment of both Wi-Fi and mobile WiMAX. This research also recommends consideration of the following facts when seeking deployment of these technologies in rural communities: the geographical setting of the target terrain, the distances between sources and target customers and distances between target communities, weather conditions of the area, applications to be deployed over the network, social well-being of the community and their financial freedom as well.

This Master’s thesis deals with project of blueprints for installation of data cabling in specific building following regulations. Theoretical part describes basic overview of used regulations and principles of data networks with focus on Ethernet and Wi-Fi standards. Separated chapters cover passive layer of data networks and computer-aided-design. Practical part contains implementational and architectural drawing of data network project in multipurpose building. According to these plans the project could be realized.

Wireless devices search for access points when they want to connect to a network. A devicechooses an access point based on the received signal strength between the device and theaccess point. That method is good for staying connected in a local area network but it doesnot always offer the best performance, which can result in a slower connection. This is thestandard method of connection for wireless clients, which will be referred to as the standardprotocol. Larger networks commonly have a lot of access points in an area, which increasesthe coverage area and makes loss of signal a rare occurrence. Overlapping coverage zonesare also common, offering multiple choices for a client. The company Inteno wanted an alternativeconnection method for their gateways. The new method that was developed wouldforce the client to connect to an access point depending on the bitrate to the master, as wellas the received signal strength. These factors are affected by many different parameters.These parameters were noise, signal strength, link-rate, bandwidth usage and connectiontype. A new metric had to be introduced to make the decision process easier by unifying theavailable parameters. The new metric that was introduced is called score. A score system wascreated based on these metrics. The best suited access point would be the one with the highestscore. The developed protocol chose the gateway with the highest bitrate available, while thestandard protocol would invariably pick the closest gateway regardless. The developed protocolcould have been integrated to the standard protocol to gain the benefits of both. Thiscould not be accomplished since the information was not easily accessible on Inteno’s gatewaysand had to be neglected in this thesis. / Trådlösa enheter söker efter accesspunkt när de vill ansluta till ett nätverk. En enhet väljer enaccesspunkt beroende på den mottagna signalstyrkan mellan enheten och accesspunkten.Denna metod medför en stabil uppkoppling i ett lokalt nätverk, men medför inte alltid bästamöjliga prestanda, vilket kan resultera i en långsammare anslutning till Internet. Detta ärstandard uppkopplings metod för trådlösa klienter, vilket kommer refereras som standardprotokollen. Större nätverk har vanligtvis en mängd olika accesspunkter i ett område, vilketgör att signalstyrkan sällan förloras. Överlappande täckningsområden är också vanliga ochger en klient flera alternativa accesspunkter att välja mellan. Företaget Inteno ville tacklaproblemet genom att skapa en ny anslutningsmetod för deras nätverksnoder. Den nya metodenskulle tvinga klienter att ansluta sig till en accesspunkt beroende på bithastigheten mothuvudnoden, så väl som den mottagna signalstyrkan. Faktorerna påverkas av många olikaparametrar. Parametrarna var, brus, signalstyrka, länkhastighet, dataanvändning och anslutningstyp.Ett nytt mått behövde införas för att göra beslutsprocessen enklare, genom att förenade tillgängliga parametrarna. Det nya måttet som infördes var poäng. Ett poängsystemskapades och baserades på de önskade värdena. Den accesspunkten med högst poäng erbjödden bästa uppkopplingen till huvudnoden. Det utvecklade protokollet valde nätverksnodenmed den högsta överföringshastighet som var tillgänglig, medan standardprotokollet alltidvalde den närmaste nätverksnoden utan hänsyn till andra faktorer. Den utvecklade protokolletkunde ha integrerats med standardprotokollet för att utnyttja fördelarna av bägge protokollen.Detta var inte möjligt eftersom informationen inte var lättåtkomlig på Intenos nätverksnoderoch fick försummas i avhandlingen.

Real-time voice measurements were performed to assess whether there are significant problems with 802.11b wireless networks regarding real-time voice communication. We present an analysis of how the 802.11b MAC protocol and diverse environmental conditions affect the quality of real-time voice in terms of loss, delay, and jitter. We also reveal practical issues of wireless monitoring with passive sniffers for this type of analysis. The results obtained in our measurements show that in the majority of the experiments the quality was good, but under some circumstances the requirements for an acceptable voice communication were not met. / Realtidsröstmätningar gjordes för att testa om det finns problem med 802.11b trådlösa nätverk beträffande realtidsröstkommunikation. En analys presenteras av hur 802.11b MACs protokoll och olika tillstånd i omgivningen påverkar kvaliteten på realtidsrösten i form av förluster, fördröjningar och jitter. Även praktiska angelägenheter om trådlös övervakning med passiva sniffers visas. De erhållna resultaten visar att i en majoritet av fallen var kvaliteten acceptabel, men under vissa förhållanden blev inte kraven för röstkommunikation uppfyllda.

Metamaterials are humanly engineered artificial electromagnetic materials which produce electromagnetic properties that are unusual, yet can be observed readily in nature. These unconventional properties are not a result of the material composition but rather of the structure formed. The objective of this thesis is to investigate and design smaller and wideband metamaterial-inspired antennas for personal communication applications, especially for WiMAX, lower band and higher band WLAN applications. These antennas have been simulated using HFSS Structure Simulator and CST Microwave Studio software. The first design to be analysed is a low-profile metamaterial-inspired CPW-Fed monopole antenna for WLAN applications. The antenna is based on a simple strip loaded with a rectangular patch incorporating a zigzag E-shape metamaterial-inspired unit cell to enable miniaturization effect. Secondly, a physically compact, CSRR loaded monopole antenna with DGS has been proposed for WiMAX/WLAN operations. The introduction of CSRR induces frequency at lower WLAN 2.45 GHz band while the DGS has provided bandwidth enhancement in WiMAX and upper WLAN frequency bands, keeping the radiation pattern stable. The next class of antenna is a compact cloud-shaped monopole antenna consisting of a staircase-shaped DGS has been proposed for UWB operation ranges from 3.1 GHz to 10.6 GHz. The novel shaped antenna along with carefully designed DGS has resulted in a positive gain throughout the operational bandwidth. Finally, a quad-band, CPW-Fed metamaterial-inspired antenna with CRLH-TL and EBG is designed for multi-band: Satellite, LTE, WiMAX and WLAN.

Libyan Ministry of Higher Education. / The full text will be available at the end of the embargo: 28th Nov 2024 / Subtitle: Simulation and Measurement of Reconfigurable Antennas for Cognitive Radio, UWB Applications, Investigation of Antenna Gain and Efficiency, Frequency Tuneable Range, Antenna Radiation Performance and Antenna Design Optimization using Parametric Studies as well as using MIMO antenna for wireless body area networks