Kyoto University (京都大学) / 0048 / 新制・論文博士 / 博士(工学) / 乙第12459号 / 論工博第4041号 / 新制||工||1497(附属図書館) / 28069 / (主査)教授 平尾 一之, 教授 横尾 俊信, 教授 田中 勝久 / 学位規則第4条第2項該当

Improved imaging and detection of objects through turbid obscurants is a vital problem of current interest to both military and civilian entities. Image quality is severely degraded when obscurant fields such as fog, smoke, dust, etc., lie between an object and the light-collecting optics. Conventional intensity imaging through turbid media suffers from rapid loss of image contrast due to light scattering from particles (e.g. in fog) or random variations of refractive index (e.g. in medical imaging). Intensity imaging does not differentiate between rays scattered off particles in the obscurant field and those reflected off objects within the field. Scattering degrades image quality in all spectral bands (UV, visible, and IR), although the amount of degradation is wavelength dependent. This dissertation features the development of innovative system designs and techniques that utilize scattered radiation's deterministic polarization state evolution to greatly enhance the image contrast of stand-off objects within obscurant fields such as smoke, fog, or dust using active polarized illumination in the visible. The produced sensors acquire and process image data in real time using computationally non-intensive algorithms that differentiate between radiation that scatters or reflects from obscured objects and the radiation from the scattering media, improving image contrast by factors of ten or greater for dense water vapor obscurants.

This dissertation investigates challenges associated with optics in the 10-500 wavelength size regime. For the visible spectrum, this size range (5-250um) is classified as micro-optics, but is set apart from other size ranges by a noticeable lack of suitable simulation and metrology tools. Optics of this size are gaining popularity in applications such as solid immersion lenses (SIL) and laser beam shaping, but require more research into simulation, testing, fabrication, and assembly in order to be easily integrated into commercial applications.A survey of previous work on SILs and micro-optics simulation/testing is given, including past work with gallium phosphide (GaP) microlenses. A new SIL aberration treatment is described using spherical-parent 3rd order aberrations. Agreement is shown with previous work, and the lack of hemisphere approximations gives a broader understanding of aberrations for varying SIL thicknesses. Results show that aberration reduces with lens radius, but thickness tolerances become tighter as dimensions shrink. A study of GaP intrinsic birefringence and the theoretical impact on the induced polarization signal is also given.A survey of beam propagation simulators is given and a sequential piece-wise diffraction (SPWD) simulator is developed for arbitrary optical systems that overcomes the difficulties of simulation in the 10-500 wavelength size regime. A discussion of a future extension to the work to determine reflected and transmitted field amplitudes with a non-sequential method is presented with specific discussion on the challenges of electric field surface transfer.The design and operation of a micro-interferometer is discussed and testing results from the first sub-100um diameter GaP SILs are shown. A novel method for determining the shape profile of aspheric surfaces using information from annular fringes is presented. Theoretical beam shaping applications for micro GaP lenses is also discussed with results using the SPWD method. Experimental results are also shown for a 1x1x0.3mm beam shaper package that images a laser diode beam to an approximate size of 60um at a working distance of 4mm.Finally, designs and experimental results are shown for the integration of GaP micro-optics into conventional systems as SILs or beam-shaping elements including methods and equipment for lapping and polishing GaP.

3D printing, also known as ”additive manufacturing”, indicates a set of fabrication techniques that build objects by adding material, typically layer by layer. The main advantages of 3D printing are unlimited shapes and geometry, fast prototyping, and cost-effective small scale production. Two-photon lithography (TPL) is a laserbased 3D printing technique with submicron resolution, that can be used to create miniaturized structures. One of the most compelling applications of TPL is the 3D printing of miniaturized optical elements with unprecedented complexity, small-scale and precision. This could be potentially beneficial in biophotonics, a multidisciplinary research field in which light-based techniques are used to study biological processes. My research has been aimed at demonstrating novel applications of 3D printing based on TPL to different biophotonic applications. In particular, here we show 3D printed micro-optical structures that enhance and/or enable novel functions in advanced biophotonics methods as two-photon microendoscopy, optical trapping and Stimulated Raman Scattering microscopy. Remarkably, the micro-optical structures presented in this thesis enable the implementation of advanced techniques in existing or simpler microscopy setups with little to no modification to the original setup. This possibility is essentially allowed by the unique miniaturization and in-situ 3D printing capabilities offered by TPL.

No description available.

This work aims to implement 3D microstructures that generate light with orbital angular momentum towards applications in Biophotonics. Over the past few decades, 3D printing has established itself as the most versatile technology with effortless adaptability. Parallel to this, the concept of miniaturiza tion has seen tremendous growth irrespective of the field and has become an estab lished trend motivated by the need for compact, portable and multi-function devices. Therefore, when these two concepts get together, i.e., 3D printing of miniaturized objects, it could lead to an exciting path with endless opportunities. When it comes to optics, miniaturized 3D printing offers the potential to create compact optical micro-systems and exhibits a way to manufacture freeform µ-optics. In particular, two-photon lithography (TPL) is a cutting edge 3D printing technology that has re cently demonstrated groundbreaking solutions for optics as it offers high resolution with a great degree of flexibility. With a TPL 3D printer, it is possible to fabricate complex µ-optical elements and employ them for compelling applications. In recent years, light with orbital angular momentum (OAM), or ”twisted” light, has captured the interests of several researchers due to its inspiring applications. Tra ditionally, to generate OAM beams, one would require bulk, table-top optics, restrict ing their applications to over-the-table setup. An alternative approach of OAM beam generation is through µ-structures over the fiber, as they can open up new opportu nities, especially in Bioscience, and facilitate in-vivo operations. In particular, this probe-like setup can be used for processes such as optical trapping, high-resolution microscopy, etc. Hence, I propose the development of a novel approach with un precedented capabilities for generating OAM beams right from single-mode optical fibers, by transforming its Gaussian-like output beam by using complex 3D printed microstructures. In this document, I will showcase designs and results on generating Bessel beams (both zeroth- and high-order) and high-NA converging beams (with and without OAM) for optical trapping from the fiber. Remarkably, I achieved the first-ever fiber-based high-order Bessel beam generation and the first-ever fiber optical tweezers with OAM.

Although optical fibers and specialty waveguides are the base of majority of today's telecom and light delivery applications, fabrication deformation, nonlinearity and attenuation limit the bandwidth of the data being transmitted or the amount of power carried by these systems. One-way to overcome these limitations without changing the fibers design or fabrication is to engineer the input light in order to excite a certain mode or a group of modes with unique optical properties. Diffractive and micro optics are highly effective for selectively coupling light to specific modes. Using micro optics, mode selective coupling can be achieved through several matching schemes: phase only, phase and amplitude, or phase, amplitude and polarization. The main scope of this work is the design and fabrication of novel optical elements that overcome the limitations of these light delivery systems, as well as the characterization and analysis of their performance both experimentally and using numerical simulation

In the field of photolithography for micro-chip manufacturing, the photo-mask is used to print desired patterns on a proper photo-resist on wafer. The most common type of photo-mask is binary amplitude mask made an opaque layer of chrome. The principle and potential application of hybrid photo-mask with diffractive phase element and binary amplitude is presented in this dissertation paper from both numerical modeling and experimental research. The first important application is the characterization of aberration in the stepper system using hybrid diffractive photo-mask. By utilizing multiple diffractive illumination conditions, it is possible to characterize Zernike wave front aberration coefficients up to any desired order. And, the second application is the use of binary phase grating mask for analog micro-optics fabrication. This approach of using binary phase grating mask for fabricating analog micro-optics turned out to be a very effective alternative for gray-scale mask technology. Since this is a pure phase only mask, it doesn't cause any scattered noise light like half-tone mask and it results in smooth desired resist profile. The benefits and limitations of hybrid diffractive photo-mask approach for both applications are discussed.

Photonic crystals and nanophotonics have received a great deal of attention over the last decade, largely due to improved numerical modeling and advances in fabrication technologies. To this day, fabrication and optical behavior remain decoupled during the design phase and numerous assumptions are made about "perfect" geometry. As research moves from theory to real devices, predicting device behavior based on realistic geometry becomes critical. In this dissertation, a set of numerical tools was developed to model micro and nano fabrication processes. They were combined with equally capable tools to model optical performance of the simulated structures. Using these tools, it was predicted and demonstrated that 3D nanostructures may be formed on a standard mask aligner. A space-variant photonic crystal filter was designed and optimized based on a simple fabrication method of etching holes through hetero-structured substrates. It was found that hole taper limited their optical performance and a method was developed to compensate. A method was developed to tune the spectral response of guided-mode resonance filters at the time of fabrication using models of etching and deposition. Autocloning was modeled and shown that it could be used to form extremely high aspect ratio structures to improve performance of form-birefringent devices. Finally, the numerical tools were applied to metallic photonic crystal devices.

The present dual field of view flexible colonoscope can provide both forward view and radial or backward view of the colon to improve detection of cancerous polyps. The colonoscope has its own illumination that illuminates the parts of the colon viewed by imaging optics. The optical system, limited only by the diffraction effects at the exit pupil over the entire visible spectrum, can provide high resolution and is suitable for color imaging. The flexible colonoscope has an on-board sensor at the proximal end of the colonoscope to improve resolution. The proximal end of colonoscope measures only 8 mm in diameter and 20 mm in length. The present colonoscope has the potential to be scaled down to as small as 6 mm inner diameter from the present 8 mm.