Although wood floor production does not use water in the production process, water consumptionis related to cleaning and washing of floor and machineries in different steps of the process line,which generate a number of small flows that are highly polluted.Besides this, the industry has a need to store large amounts of wood outside to be able to havecontinuity in the production. This takes up a lot of space outdoors and once it rains the water thathas been in contact with wood, oil and metals forms stormwater, which transports pollutants.Stormwater has for a long time not been seen as a problem and has often been discharged intorecipient water bodies without any treatment. During cold seasons, this also involves snowmelt thatcan transport high concentrations of different pollutants.This report describes the composition of process- and stormwater from a wood floor industry inNybro, Sweden regarding parameters such as COD, phenol, tannin and lignin. The concentrationsof phenols in the stormwater were found in a range considered toxic to marine life.Regarding the process water, high values was found for COD (Chemical Oxygen Demand) and forother substances and elements potentially toxic (e.g. formaldehyde, wood resins, detergents andmetals). If these waters are directly released to a sewage treatment plant without any pre-treatmentprocess it can disturb the plant treatment efficiency; if released to a recipient water body, it cancause oxygen deficiency and consequently, death to marine life.The possibility of reducing the levels of pollutants through the use of electrocoagulation has beenexamined in this study. This has been done both for process water and stormwater from the woodfloor industry. A 250 ml batch unit for electrocoagulation EC was setup with iron (Fe) andaluminium (Al) electrodes for treating process water and stormwater. The results show that the ECprocess can reduce COD concentration from stormwater at least 70%. On the other hand, lessefficiency of EC for treating process water was observed.A method for simulating a snowmelt period in lab scale was also developed. Snow collected from awood floor industry was melted according to real temperature and the quality of these samples hasthen been compared to on-site samples of stormwater / Development of an integrated approach for industrial wastewater and stormwater management in the wood-industry sector

This work explores the usefulness of fish bile analysis in combination with biomarkers for identifying and evaluating new environmental contaminants in the aquatic environment. It illustrates how bile analysis can be used together with biomarkers to assess the causes of estrogenic effects, to identify chemicals in the aquatic environment that are taken up by fish, and to monitor environmental exposure. In a first application, fish exposed to sewage treatment plant effluent were studied. Elevated levels of vitellogenin in the exposed fish demonstrated that estrogenic effects occurred. Several estrogen disrupting substances were identified in the fish bile, and analysis of water samples confirmed that these substances were present in the effluent. The synthetic estrogen 17a-ethinylestradiol, which is known to be present in sewage treatment plant effluent, was shown for the first time to be taken up by fish. Considering the reported potencies of the detected substances, it was concluded that 17a-ethinylestradiol was the major contributor to the estrogenic effects. Chemical analysis of bile was used to identify rubber additives that were released from tires immersed in water. The bile of rainbow trout held in the water contained high levels of metabolites of PAHs and aromatic nitrogen compounds. Several biomarkers were also measured in the exposed fish, and EROD induction and oxidative stress were observed. Based on the bile analysis observations together with knowledge of toxicological mechanisms, it was postulated that the EROD induction was due to the PAHs, while aromatic nitrogen compounds caused the oxidative stress. Resin acids in fish bile proved to be a good indicator of exposure in a chronic long-term study of rainbow trout exposed to effluent from a total chlorine free (TCF) pulp mill. Elevated levels of GST (gluthatione-S-transferase) and GR (gluthatione reductase) activity, and the presence of DNA adducts after a two month recovery period, indicated that compounds in the pulp mill effluents have persistent effects. In addition to characterising the exposure of the fish to the effluent, the analysis of the resin acids in the bile provided evidence of accidents in the pulp mill that the existing process monitoring system had not detected. Resin acids in bile were also found to be a valuable indicator of exposure to pulp mill effluents for eelpout living in the Baltic Sea. A correlation between resin acid levels in bile and skewed sex ratios provided an important link in the chain of evidence that substances in the pulp mill effluents cause male bias of the eelpout embryos. A particularly good example of the potential of bile analysis was the identification of a previously unknown environmental contaminant. A large peak was observed in the bile extracts of fish that had been exposed to sewage treatment plant effluent. This peak was identified as triclosan, which demonstrated its presence in sewage treatment plant effluent. Other work went on to show that it is a common contaminant of the aquatic environment. The ability of fish to concentrate contaminant metabolites in bile to levels very much higher than in the environment, and the comparatively low levels of analytic interferences, make bile a particularly attractive matrix to search for new, unknown organic pollutants

In some environmental situations, environmental effects caused by elevated metals resulting from past mining and smelting activities can be observed in nearby receiving water bodies several decades after mine and smelter closure. There is a growing need for managing the hazardous solid wastes such as mining wastes as well as for assessing water quality and for sustainable management of sediment quality. The work presented in this thesis examined the mobilization of metals from two metal sources: mining wastes from a mine site in Vietnam and sediments from a contaminated lake in Sweden in order to test the hypothesis that mobilization of metals will be increased, when the environmental conditions change by e.g. exposure of mining wastes to oxidative weathering, change of redox conditions at the water-sediment interface and resuspension of sediments. The results from this work under field and laboratory conditions have verified the hypothesis. The exposure of sulphidic mining wastes in oxidative weathering conditions may cause long-term production of ARD and the resultant long-term mobility of metals. The oxidation/resuspension of sediments is an important factor for the release of trace metals Zn, Cu and Cd into the solution and substantial amounts of particles and, hence, associated metals into overlying water. The concomitant changes in pH during oxidation/resuspension of sediment play a significant role in the metal release both to redox sensitive elements Fe and Mn and trace elements Zn, Cu and Cd. The concomitant change in DOC during oxidation/resuspension can also contribute to the increased mobility of study metals. The field study was coupled to intermittent operation of a hydropower plant. The mobility of the metals was higher under operation compared to non-operation and, thus, the potential impacts on dispersal of metal pollution to downstream aquatic environments. The sudden increase in water flow upon the hydropower plant upon shifts from inactive to active state could cause immediate release of particles and thus particulate metals in the overlying water. However, the magnitude and its integrated effects in fluxes of metals over the season call for further research. There is a need to further investigate the impacts of hydropower generation in a longer period of time and at a higher frequency of observations at the very start of the hydropower operation. The results from this multidisciplinary approach would give a basis for an optimal operation of the hydropower plant to minimize the metal pollution associated with the water flow. / <p>The series number is changed from 410 to 430 and the ISBN is changed from 978-91-85895-56-4 to 978-91-7393-926-3.</p>

Human exposure to harmful compounds in the environment, from intake via food, occupational exposures or other sources, could have health implications. Exposure to reactive compounds/metabolites can be identified and quantified as hemoglobin (Hb) adducts by mass spectrometry. This thesis aimed at improved synthetic pathways for reference standards, and improved analytical methods for adducts to N-terminal valine in Hb from a range of reactive compounds; isocyanates, aldehydes, methyl vinyl ketone (MVK), and diepoxybutane (DEB). Isocyanates form urea adducts with N-terminal valine by carbamoylation, which are detachable as hydantoins by hydrolysis. A new synthetic pathway for reference standards of adducts from isocyanates and a method for their analysis by liquid chromatography/mass spectrometry (LC/MS) were developed. Aldehydes form reversible imines (Schiff bases) with N-termini in Hb. After stabilisation by reduction and detachment by isothiocyanates using modified Edman methods, these adducts could be analysed by gas chromatography/mass spectrometry (GC/MS) or LC/MS. 5-Hydroxymethylfurfural, its metabolites, and other aldehydes related to exposure via food, were studied with regard to analysis by these methods with synthesised standard references. A considerably improved analytical method for imines was developed. Many of the studied adducts are too short-lived in vivo or in vitro to be used for long-term biomonitoring. However, different approaches for the analysis were evaluated. Through synthesised reference standards, an observed unknown adduct in blood was verified as the adduct from MVK. There exist both natural and anthropogenic sources for MVK. DEB, metabolite of butadiene, forms a cyclic adduct to valine-N. A new approach using hydrazinolysis of protein and enrichment by molecularly imprinted solid-phase extraction was tested on synthesised reference DEB-adduct and gave promising results. Synthesised standards were characterized by NMR, LC/MS and GC/MS. / <p>At the time of the doctoral defense, the following papers were unpublished and had a status as follows: Paper 1: Submitted. Paper 3: Submitted. Paper 4: Submitted.</p>

Chlorinated paraffins (CPs) are ubiquitous environmental contaminants. They fulfill all of the criteria (persistent, toxic, and subject to long-range transport) for persistent organic pollutants (POPs) according to the United Nations Economic Commission for Europe (UNECE). CPs are also under consideration for inclusion in the Stockholm Convention on POPs. Their presence has been shown in various environmental matrices in the industrialized parts of the world, as well as in remote regions such as the Arctic. The aim of this thesis was to increase the limited knowledge of the presence of CPs in the environment, their sources to the environment, and the resulting human exposure. An analytical procedure for the determination of CPs in environmental samples based on gas chromatography coupled to electron capture detection (GC-ECD) has been developed. GC-ECD is a relatively inexpensive instrument that is fast and easy to operate. These advantages open up the possibility for a comprehensive screening of the occurrence of CPs in the environment, including developing countries. Furthermore, the occurrence of CPs in ambient air and in indoor air and dust was studied. Elevated CP concentrations in indoor air (&lt;5-210 ng/m3) were observed compared to ambient air (0.7-33 ng/m3), which is indicative of the presence of indoor emission sources. Indoor air and dust concentrations were used to estimate the human exposure to CPs via the indoor environment. Comparison of the estimates to available dietary intake estimates indicated that the indoor exposure pathways are not negligible. CP concentrations in ambient air from urban Stockholm were higher than in rural Aspvreten, Sweden. This indicates the presence of additional (emission) sources in urban areas compared to rural sites. Additionally, a seasonal variation of air concentrations was observed at both locations, suggesting temperature dependent emission sources for CPs. These observations were supported by a substance flow analysis of CPs performed for Stockholm. This study estimated the major emission sources of CPs to the Stockholm environment to be emissions from painted surfaces and in-place sealants. / At the time of the doctoral defense, the following papers were unpublished and had a status as follows: Paper 2: Manuscript. Paper 3: Manuscript. Paper 4: Manuscript.

<p>Although wood floor production does not use water in the production process, water consumptionis related to cleaning and washing of floor and machineries in different steps of the process line,which generate a number of small flows that are highly polluted.Besides this, the industry has a need to store large amounts of wood outside to be able to havecontinuity in the production. This takes up a lot of space outdoors and once it rains the water thathas been in contact with wood, oil and metals forms stormwater, which transports pollutants.Stormwater has for a long time not been seen as a problem and has often been discharged intorecipient water bodies without any treatment. During cold seasons, this also involves snowmelt thatcan transport high concentrations of different pollutants.This report describes the composition of process- and stormwater from a wood floor industry inNybro, Sweden regarding parameters such as COD, phenol, tannin and lignin. The concentrationsof phenols in the stormwater were found in a range considered toxic to marine life.Regarding the process water, high values was found for COD (Chemical Oxygen Demand) and forother substances and elements potentially toxic (e.g. formaldehyde, wood resins, detergents andmetals). If these waters are directly released to a sewage treatment plant without any pre-treatmentprocess it can disturb the plant treatment efficiency; if released to a recipient water body, it cancause oxygen deficiency and consequently, death to marine life.The possibility of reducing the levels of pollutants through the use of electrocoagulation has beenexamined in this study. This has been done both for process water and stormwater from the woodfloor industry. A 250 ml batch unit for electrocoagulation EC was setup with iron (Fe) andaluminium (Al) electrodes for treating process water and stormwater. The results show that the ECprocess can reduce COD concentration from stormwater at least 70%. On the other hand, lessefficiency of EC for treating process water was observed.A method for simulating a snowmelt period in lab scale was also developed. Snow collected from awood floor industry was melted according to real temperature and the quality of these samples hasthen been compared to on-site samples of stormwater</p> / Development of an integrated approach for industrial wastewater and stormwater management in the wood-industry sector

Many modern products, especially electronic goods, are protected by brominated flame retardants (BFR). Some of the most common flame retardants are polybrominated diphenylethers (PBDE), tetrabromobisphenol-A (TBBP-A) and hexabromocyclododecane (HBCD). These compounds have been found in environmental samples and shown to have physiological effects on experimental animals. This thesis considers end-of-life aspects of brominated flame retardants. When spread in the environment, these compounds may be degraded into other forms. For example, if sludge contaminated with PBDE is used as an agricultural fertilizer, the PBDE could be degraded by sunlight to species of PBDE with lower degree of bromination and, to some extent, also form polybrominated dibenzofurans (PBDF). In addition, PBDF and polybrominated dibenzo-p-dioxins (PBDD) are formed during combustion of brominated flame retardants. When waste products with brominated flame retardants are co-combusted with household waste or other chlorinated fuel, polybrominated- chlorinated dibenzo-p-dioxins (PBCDD) and polybrominated- chlorinated dibenzofurans (PBCDF)will be formed. The bromin/chlorine composition of dioxins and furans is dependent on the bromine/chlorine ratio in the fuel, but the types of brominated flame retardants that are being combusted is less important. In the studies reported here, bromine levels higher than "normal" for household waste has been used. The results show that there is a pronounced increase in total dioxin levels in fluegas when when bromine is present, implying that waste containing brominated flame retardants should only be incinerated at combustion plants with effecient air pollution control devices.

Syftet med detta arbete är att undersöka vilka mängder av vanliga trafikrelaterade föroreningar Växjö kommuns sopsand innehåller och om återvinning av den använda sanden är ekonomiskt genomförbart. Provtagning gjordes avseende mikroplaster, metaller, kolväten, näringsämnen och konduktivitet för att få en uppfattning om sandens föroreningsgrad och vilken reningsmetod som är lämplig. Det utfördes även en kostnadsanalys baserat på uppgifter från Växjö kommun och kontakt med andra företag i form av intervjuer. Analysen av sopsand påvisar låga halter av föroreningar av tungmetaller och kolväten. Detta innebär att sanden kan tvättas för att sedan återanvändas alternativt användas inom andra områden. Analys av totalkväve och totalfosfor tyder på förhöjda halter i använd sand till skillnad från konduktiviteten vilken är högre i oanvänd sand. En mikroplastanalys bekräftar också att plastfragment, plastfibrer och partiklar finns i sopsanden.  Överlag har kontakterna med företagen gett uppfattningen att flertalet av de försök som gjorts tidigare har avslutats på grund av bristande lönsamhet. LCC-analys tyder på att en ekonomisk men framför allt miljömässig vinst kan uppnås under optimala förutsättningar. Slutsatsen av arbetet är att det blir svårt att etablera en fungerande lösning för sandtvätt i nuläget, men att det finns möjligheter att i framtiden kunna återanvända Växjö kommuns sopsand för att uppnå ekonomisk och miljömässig besparing.

<p>During pulp and papermaking process a huge amount of water is used. The wastewater contains a large amount of pollutants and has to be treated before it reaches the recipient. In March 2004 a new bleaching plant was started up at SCA Graphic Sundsvall AB, Ortviken’s paper mill using peroxide. The production of bleached thermo mechanical pulp and thus the load to the wastewater plant increased. During bleaching substances dissolve from the pulp and the amount of COD in the wastewater increase. To keep the efficiency of chemical and biological oxygen demand (COD, BOD) removal, the aerated lagoon is supplied by liquid oxygen. In November the same year a new pre-step including a pre-aeration, carrier and selector step was added to the existing wastewater plant. The COD-loading to the lagoon decreased and the supply of liquid oxygen was reduced.</p><p>This master thesis has been carried out at SCA Graphic Research AB, Sundsvall. The aim was to chemically characterize the wastewater with focus on the composition of carbohydrates, lignin and extractives and its influence on the biodegradability. Measurements have been carried out on total samples, suspended solids, colloidal and dissolved substances using GF/A and ultra filtration. Measurements were performed on process water from the bleaching plant and on water during the wastewater treatment process. The results show that the chemical composition of dissolved substances has a larger impact on the biodegradability than the total amount of COD. A large amount of lignin will make the wastewater harder to degrade. Suspended solids have lower biodegradability compared to the dissolved fraction. Analyzes of suspended material from the bleaching plant show a relative composition of around 41 % lignin. Analyzes done before on the dissolved fraction show a composition of 29 %. It seems that a larger amount of lignin is represented in suspended solids compared to the dissolved fraction. This can explain the low biodegradability, combined with the theory that the suspended solids are less accessible for the microorganisms. To reduce the outgoing COD the incoming flow of dissolved lignin and suspended solids to the active sludge plant has to decrease. COD in the outgoing wastewater to the recipient consists of around 90 % lignin. Extractives as saturated fatty acids, palmitic and stearic acid plus lignans (which is interpreted as a byproduct from lignin degradation) do not degrade remarkable during wastewater treatment. Flocculation of COD is one way to reduce the discharge to the recipient. Addition of 2,6 g/l PAX-18 (a high charged aluminum complex) to the wastewater from the bleaching plant gives a reduction of 40 % COD and 50 % lignin in laboratory scale and it is recommended to study further. Time related studies of BOD show that the microorganisms need five days to degrade organic material and the hydraulic retention time in the aerated lagoon has to be guaranteed.</p> / <p>Vid massa- och pappersframställning åtgår stora mängder vatten. Det processberörda avloppsvattnet innehåller mycket föroreningar varför det måste renas innan det släpps ut till recipienten. I mars 2004 startades ett nytt väteperoxidblekeri vid SCA Graphic Sundsvall AB, Ortvikens pappersbruk varvid produktionen av blekt termomekanisk massa ökade och den biologiska reningen belastades hårdare. Blekning löser ut vedämnen från massan och bidrar således till ökad mängd syreförbrukande ämnen i avloppet. För att upprätthålla reduktionen av syreförbrukande ämnen (COD, BOD) tillförs ren syrgas till den luftade dammen. I november samma år utökades den externa reningsanläggningen med ett biologiskt försteg, en s.k. multibioanläggning bestående av ett frisimmarsteg, ett bärarsteg samt ett selektorsteg. COD-belastningen in till den luftade dammen minskade och tillförseln av ren syrgas kunde reduceras.</p><p>Examensarbetet har utförts vid SCA Graphic Research AB, Sundsvall med syftet att kemiskt karaktärisera avloppsvattnets sammansättning av kolhydrater, lignin och extraktivämnen och dess inverkan på vattnets grad av biologisk nedbrytbarhet. Analyser har gjorts på totalprov, suspenderande ämnen samt kolloidalt och löst material via fraktionering med hjälp av GF/A- och ultrafiltrering. Analyser gjordes dels på processvatten från blekerierna och dels på avloppsvatten under reningsprocessen. Resultaten visar att den kemiska sammansättningen hos löst material har större inverkan på avloppsvattnets grad av nedbrytbarhet än den absoluta halten av syreförbrukande ämnen. En hög andel lignin ger ett mer svårnedbrytbart vatten. Suspenderat material är vidare mer svårnedbrytbart än de lösta fraktionerna. Analys av suspenderande substans hos blekpressat visar att andelen lignin är omkring 41 % medan arkiverade analysresultat på den lösta fasen visar ett innehåll på omkring 29 %. Det tyder alltså på en betydligt högre andel lignin i den partikulära fasen jämfört med den lösta, vilket i kombination med att materialet inte är lika lättillgängligt för mikroorganismerna kan förklara den låga bionedbrytbarheten. Om COD-utsläppet ska minskas bör inkommande flöde av löst lignin och suspenderande substans till den biologiska reningen reduceras. COD-halten i utgående avloppsvatten till recipienten utgörs av omkring 90 % lignin. De extraktivämnen som inte bryts ned är mättade fettsyror, exempelvis palmitin- och stearinsyra samt lignan, vilket antas bildas som restprodukt vid degradering av lignin. Flockning av syreförbrukande ämnen är ett sätt att gå till väga för att minska utsläppet av dessa till recipienten. Genom tillsats av 2,6 g/l PAX-18 (ett högladdat aluminiumkomplex) till blekeriavloppet kunde 40 % COD och 50 % lignin reduceras. Flockningsförsöket är gjort i laboratorieskala vid rumstemperatur och ytterligare utvärdering rekommenderas. Tidsstudier av BOD visar att mikroorganismerna behöver fem dagars uppehållstid för att hinna bryta ned organiskt material i avloppsvattnet, varför omloppstiden i den luftade lagunen inte bör understiga denna tidsrymd.</p>

<p>In this study potential health risks for employees in connection with handling of bottom ash and bottom ash water at a Municipal Waste Incineration (MWI) plant have been investigated. Air surrounding the bottom ash and the bottom ash water has been examined. MWI is one of the primary ways to manage solid household waste, and bottom ash is the main solid residue produced by the incineration process. Bottom ash constitutes about 15-20% of the original waste. The bottom ash is extinguished in a water bath (bottom ash water).</p><p>The study was carried out in a MWI plant in Karlstad, Sweden. The plant is equipped with a grate furnace with a capacity of 7 tonnes per hour. Annually about 50 000 tonnes are incinerated at the plant.</p><p>Levels of airborne particles, metals present in the airborne particles, volatile organic compounds (VOC), and phosphine were measured in the air. Analysis of the bottom ash water including: pH, total phosphorus, ammonium, chemical oxygen demand (COD), suspended solids, and bacteria were also carried out. Further, a questionnaire was distributed to investigate how the workers at the MWI plant re°ected on health when working.</p><p>The results showed that the levels of airborne particles, metals and VOC did not pose any major health risks. The bacterial analysis demonstrated very low concentrations of bacteria in the water and thus that the bacteria posed no risk for the workers. The phosphine measurements did not result in levels exceeding the Swedish threshold limit value. However, the method used in this study was not well-tested in these sorts of environments and the results implied that higher levels of phosphine might be present. The conclusion from the questionnaire was that there is a concern about health risks in connection with certain tasks at the plant.</p> / <p>På Hedenverket, Karlstads Energi AB, förbränner man årligen cirka 50 000 ton hushålls- och verksamhetsavfall. En av restprodukterna av förbränningen kallas slagg (bottenaska) och utgör ca 15-20% av det inmatade avfallet. Slaggen släcks i ett vattenbad under själva pannan (slaggsläckningsbad) och matas sedan ut, via ett skakbord för reduktion av vatten, till containrar innan det slutligen körs på deponi.</p><p>Syftet med det här projekt var att utreda om det föreligger några hälsorisker vid arbete kring slaggen och slaggsläckningsvattnet. För att skapa en bild av möjliga hälsorisker gjordes en inledande studie av tidigare utredningar, mätningar gjorda på avfallsförbränningsanläggningar runt om i Svergie och vad kemiska och biologiska hälsorisker innebär. Även lagstiftning på området har berörts.</p><p>Med tidigare utredningar och mätningar samt diskussioner som grund utfördes mätningar av damm, metallhalter i damm, VOC och fosfin i luften samt en analys av slaggvattnet och bakterier i slaggvattnet. För att skapa en uppfattning av hur personalen, som arbetar med driften, upplever sin arbetssituation ur hälsorisksynpunkt genomfördes även en enkätundersökning.</p><p>Resultaten av undersökningarna på Karlstads Energi AB visade att varken damm, metaller eller VOC utgör någon hälsorisk. Bakterieprovtagningen av slaggsläckningsvattnet visade på mycket låga halter av bakterier och bakterier kan därför inte sägas utgöra någon hälsorisk.</p><p>Undersökningar av slaggvatten på andra anläggningar i Sverige visar däremot på höga metallhalter i slaggvattnet och det vore således inte särskilt hälsosamt att få i sig större mängder av detta. Resultaten av fosfinmätningen visar inte heller på några alarmerande nivåer, men metoden som användes är inte väl beprövad i den här typen av miljö. Resultaten kan tyda på att högre halter av fosfin förekommer, men hur höga de är inte möjligt att svara på. Fosfin är ett ämne som i små mängder kan ge upphov till bland annat illamående. I enkätundersökningen påtalades att obehag och illamående uppstºar vid längre arbeten över skakbordet och det är möjligt att fosfin kan vara en orsak till detta. Enkätundersökningen visade även att det finns en oro för hälsan vid vissa typer av arbeten på anläggningen och oro för att hälsan ska påverkas negativt på längre sikt.</p>