Bus stops are key links in the journeys of transit patrons with disabilities. Inaccessible bus stops prevent people with disabilities from using fixed-route bus services, thus limiting their mobility. The Americans with Disabilities Act (ADA) of 1990 prescribes the minimum requirements for bus stop accessibility by riders with disabilities. Due to limited budgets, transit agencies can only select a limited number of bus stop locations for ADA improvements annually. These locations should preferably be selected such that they maximize the overall benefits to patrons with disabilities. In addition, transit agencies may also choose to implement the universal design paradigm, which involves higher design standards than current ADA requirements and can provide amenities that are useful for all riders, like shelters and lighting. Many factors can affect the decision to improve a bus stop, including rider-based aspects like the number of riders with disabilities, total ridership, customer complaints, accidents, deployment costs, as well as locational aspects like the location of employment centers, schools, shopping areas, and so on. These interlacing factors make it difficult to identify optimum improvement locations without the aid of an optimization model. This dissertation proposes two integer programming models to help identify a priority list of bus stops for accessibility improvements. The first is a binary integer programming model designed to identify bus stops that need improvements to meet the minimum ADA requirements. The second involves a multi-objective nonlinear mixed integer programming model that attempts to achieve an optimal compromise among the two accessibility design standards. Geographic Information System (GIS) techniques were used extensively to both prepare the model input and examine the model output. An analytic hierarchy process (AHP) was applied to combine all of the factors affecting the benefits to patrons with disabilities. An extensive sensitivity analysis was performed to assess the reasonableness of the model outputs in response to changes in model constraints. Based on a case study using data from Broward County Transit (BCT) in Florida, the models were found to produce a list of bus stops that upon close examination were determined to be highly logical. Compared to traditional approaches using staff experience, requests from elected officials, customer complaints, etc., these optimization models offer a more objective and efficient platform on which to make bus stop improvement suggestions.

Liquid biofuels produced from biomass have the potential to partly replace gasoline. One of the most promising biofuels is butanol which is produced in acetone-butanol-ethanol (ABE) fermentation. The ABE fermentation is characterized by its low butanol concentration in the final fermentation broth. In this research, the simulation of three in situ recovery methods, namely, vacuum fermentation, gas stripping and pervaporation, were performed in order to increase the efficiency of the continuous ABE fermentation by decreasing the effect of butanol toxicity. The non-integrated and integrated butanol production systems were simulated and optimized based on a number of objectives such as maximizing the butanol productivity, butanol concentration, and butanol yield. In the optimization of complex industrial processes, where objectives are often conflicting, there exist numerous potentially-optimal solutions which are best obtained using multi-objective optimization (MOO). In this investigation, MOO was used to generate a set of alternative solutions, known as the Pareto domain. The Pareto domain allows to view very clearly the trade-offs existing between the various objective functions. In general, an increase in the butanol productivity resulted in a decrease of butanol yield and sugar conversion. To find the best solution within the Pareto domain, a ranking algorithm (Net Flow Method) was used to rank the solutions based on a set of relative weights and three preference thresholds. Comparing the best optimal solutions in each case study, it was clearly shown that integrating a recovery method with the ABE fermentation significantly increases the overall butanol concentration, butanol productivity, and sugar conversion, whereas butanol yield being microorganism-dependent, remains relatively constant.

Optimizing supply chain is the most successful key for manufacturing systems to be competitive. Supply chain (SC) has gotten intensive research works at all levels: strategic, tactical, and operational levels. These levels, in some researches, have integrated with each other or integrated with other planning issues such as inventory. Optimizing inventory location and level of safety stock at all supply chain partners is essential in high competitive markets to manage uncertain demand and service level. Many works have been developed to optimize the location of safety stock along supply chain, which is important for fast response to fluctuation in demand. However, most of these studies focus on the design stage of a supply chain. Because demand at different horizon times may vary according to different reasons such as the entry of different competitors on market or seasonal demand, safety stock should be optimized accordingly. At the planning (tactical) level, safety stock can be controlled according to each planning horizon to satisfy customer demand at lower cost instead of being fixed by a decision taken at the strategic level. On the other hand, most studies that consider safety stock optimization are tied to a specific system structure such as serial, assembly, or distribution structure. This research focuses on formulating two different models. First, a multi- echelon safety stock optimization (MESSO) model for general supply chain topology is formulated. Then, it is converted into a robust form (RMESSO) which considers all possible fluctuation in demand and gives a solution that is valid under any circumstances. Second, the safety stock optimization model is integrated with tactical supply chain planning (SCP) for manufacturing systems. The integrated model is a multi-objective mixed integer non-linear programming (MINLP) model. This model aims to minimize the total cost and total time. A case study for each model is provided and the numerical results are analyzed.

Geometrical parameterisation has an important role in the aircraft design process due to its impact on the computational efficiency and accuracy in evaluating different configurations. In the early design stages, an aircraft geometrical model is normally described parametrically with a small number of design parameters which allows fast computation. However, this provides only a course approximation which is generally limited to conventional configurations, where the models have already been validated. An efficient parameterisation method is therefore required to allow rapid synthesis and analysis of novel configurations. Within this context, the main objectives of this research are: 1) Develop an economical geometrical parameterisation method which captures sufficient detail suitable for aerodynamic analysis and optimisation in early design stage, and2) Close the gap between conceptual and preliminary design stages by bringing more detailed information earlier in the design process. Research efforts were initially focused on the parameterisation of two-dimensional curves by evaluating five widely-cited methods for airfoil against five desirable properties. Several metrics have been proposed to measure these properties, based on airfoil fitting tests. The comparison suggested that the Class-Shape Functions Transformation (CST) method is most suitable and therefore was chosen as the two-dimensional curve generation method. A set of blending functions have been introduced and combined with the two-dimensional curves to generate a three-dimensional surface. These surfaces form wing or body sections which are assembled together through a proposed joining algorithm. An object-oriented structure for aircraft components has also been proposed. This allows modelling of the main aircraft surfaces which contain sufficient level of accuracy while utilising a parsimonious number of intuitive design parameters ... [cont.].

Production scheduling is one of the most important issues in the planning and operation of manufacturing systems. Customers increasingly expect to receive the right product at the right price at the right time. Various problems experienced in manufacturing, for example low machine utilization and excessive work-in-process, can be attributed directly to inadequate scheduling. In this dissertation a production scheduling algorithm is developed for Optimatix, a South African-based company specializing in supply chain optimization. To address the complex requirements of the customer, the problem was modeled as a flexible job shop scheduling problem with sequence-dependent set-up times, auxiliary resources and production down time. The algorithm development process focused on investigating the application of both particle swarm optimization (PSO) and differential evolution (DE) to production scheduling environments characterized by multiple machines and multiple objectives. Alternative problem representations, algorithm variations and multi-objective optimization strategies were evaluated to obtain an algorithm which performs well against both existing rule-based algorithms and an existing complex flexible job shop scheduling solution strategy. Finally, the generality of the priority-based algorithm was evaluated by applying it to the scheduling of production and maintenance activities at Centurion Ice Cream and Sweets. The production environment was modeled as a multi-objective uniform parallel machine shop problem with sequence-dependent set-up times and unavailability intervals. A self-adaptive modified vector evaluated DE algorithm was developed and compared to classical PSO and DE vector evaluated algorithms. Promising results were obtained with respect to the suitability of the algorithms for solving a range of multi-objective multiple machine scheduling problems. Copyright / Dissertation (MEng)--University of Pretoria, 2009. / Industrial and Systems Engineering / unrestricted

Orientadores: José Roberto de França Arruda, Pierre Lamary / Tese (doutorado) ¿ Universidade Estadual de Campinas, Faculdade de Engenharia Mecânica / Made available in DSpace on 2018-08-26T13:47:00Z (GMT). No. of bitstreams: 1 Pegoretti_ThaisdosSantos_D.pdf: 2527596 bytes, checksum: 4a887632523490eee648b59c0de7e4a2 (MD5) Previous issue date: 2014 / Resumo: Este trabalho tem como objetivo desenvolver uma metodologia capaz de adicionar critérios ambientais à fase de pré-projeto de um tratamento acústico veicular. Essa integração foi realizada através de uma otimização multiobjetivo baseada em um algoritmo genético. Um caso real foi analisado com a metodologia proposta. Ele consiste em um painel acústico multicamadas aplicado em um automóvel de passeio. O método da matriz de transferência é usado para o cálculo do comportamento acústico do painel. Neste método é feita a hipótese simplificadora de painel de área infinita, o que permite um custo computacional muito menor do que modelos de elementos finitos. Para a modelagem de materiais poroelásticos, utiliza-se o modelo de Johnson-Champoux-Allard, que inclui os fenômenos de dispersão de energia resultante da interação térmica e viscosa entre as fases sólida e fluida. O custo computacional menor do modelo é essencial para a otimização. Foram estabelecidos como objetivos da otimização a curva de perda de transmissão desejada e os resultados da análise do ciclo de vida do painel. Uma curva de perda de transmissão em função de bandas de oitava foi estabelecida como um critério de desempenho acústico mínimo. Para os critérios ambientais, o impacto de um painel existente foi estabelecido como máximo. A análise do ciclo de vida quantifica o impacto do produto em relação a diversos aspectos. Na metodologia proposta três critérios foram selecionados inicialmente: aquecimento global, destruição de recursos abióticos e toxicidade da água doce. Finalmente, apenas um deles foi utilizado na otimização, o aquecimento global, pois os critérios máximos estabelecidos para os demais eram facilmente atingidos ao longo da otimização. A otimização multiobjetivos gera como resultado uma frente de Pareto com um conjunto de soluções, e cabe ao projetista escolher a melhor opção, analisando-a em relação ao impacto ambiental e a outros aspectos, tais como disponibilidade e custo / Abstract: This work aims at developing a methodology capable of adding environmental criteria to the pre-design of a vehicular acoustic treatment. This integration was accomplished through a multi-objective optimization based on a genetic algorithm. A real case study was analyzed with the proposed methodology. It consists of a multilayered acoustic panel applied in passenger vehicles. The transfer matrix method is used to calculate the acoustic behavior of the panel. In this method the panel area is infinite. It provides a lower computational cost than finite element models, which can take into account the real dimensions of the panel. The Johnson-Champoux-Allard model was used for poroelastic material modeling. It includes the energy loss generated by the viscous and the thermal interactions between the solid and the fluid media. The lower computational cost of the model is essential for the optimization. The desired acoustic transmission and results of the life cycle analysis of the panel were established as the optimization objectives. A transmission loss curve in octave bands was defined as a minimum noise performance criterion. For the environmental criteria, an existing panel behavior was established as the maximum. The life cycle assessment quantifies the product impact with respect to many aspects. In the proposed methodology, three criteria were initially selected: global warming, abiotic depletion, and fresh water aquatic ecotoxicity. Finally, only one of them was used in the optimization, the global warming, because the maximum values established for the other criteria were easily achieved during the optimization. The multi-objective optimization provides a Pareto front solutions set, and it is up to the designer to choose the best option, analyzing the solution set with relation to environmental impact and other aspects, such as availability and cost / Doutorado / Mecanica dos Sólidos e Projeto Mecanico / Doutora em Engenharia Mecânica

O problema reconstrução filogenética têm como objetivo determinar as relações evolutivas das espécies, usualmente representadas em estruturas de árvores. No entanto, esse problema tem se mostrado muito difícil uma vez que o espaço de busca das possíveis árvores é muito grande. Diversos métodos de reconstrução filogenética têm sido propostos. Vários desses métodos definem um critério de otimalidade para avaliar as possíveis soluções do problema. Porém, a aplicação de diferentes critérios resulta em árvores diferentes, inconsistentes entre sim. Nesse contexto, uma abordagem multi-objetivo para a reconstrução filogenética pode ser útil produzindo um conjunto de árvores consideradas adequadas por mais de um critério. Nesta tese é proposto um algoritmo evolutivo multi-objetivo, denominado PhyloMOEA, para o problema de reconstrução filogenética. O PhyloMOEA emprega os critérios de parcimônia e verossimilhança que são dois dos métodos de reconstru ção filogenética mais empregados. Nos experimentos, o PhyloMOEA foi testado utilizando quatro bancos de seqüências freqüentemente empregados na literatura. Para cada banco de teste, o PhyloMOEA encontrou as soluções da fronteira de Pareto que representam um compromisso entre os critérios considerados. As árvores da fronteira de Pareto foram validadas estatisticamente utilizando o teste SH. Os resultados mostraram que o PhyloMOEA encontrou um número de soluções intermediárias que são consistentes com as soluções obtidas por análises de máxima parcimônia e máxima verossimilhança realizados separadamente. Além disso, os graus de suporte dos clados pertencentes às árvores encontradas pelo PhyloMOEA foram comparadas com a probabilidade posterior dos clados calculados pelo programa Mr.Bayes aplicados aos quatro bancos de teste. Os resultados indicaram que há uma relação entre ambos os valores para vários grupos de clados. Em resumo, o PhyloMOEA é capaz de encontrar uma diversidade de soluções intermediárias que são estatisticamente tão boas quanto as melhores soluções de máxima parcimônia e máxima verossimilhança. Tais soluções apresentam um compromisso entre os dois objetivos / The phylogeny reconstruction problem consists of determining the evolutionary relationships (usually represented as a tree) among species. This is a very complex problem since the tree search space is huge. Several phylogenetic reconstruction methods have been proposed. Many of them defines an optimality criterion for evaluation of possible solutions. However, different criteria may lead to distinct phylogenies, which often conflict with each other. In this context, a multi-objective approach for phylogeny reconstruction can be useful since it could produce a set of optimal trees according to mdifficultultiple criteria. In this thesis, a multi-objective evolutionary algorithm for phylogenetic reconstruction, called PhyloMOEA, is proposed. PhyloMOEA uses the parsimony and likelihood criteria, which are two of the most used phylogenetic reconstruction methods. PhyloMOEA was tested using four datasets of nucleotide sequences found in the literature. For each dataset, the proposed algorithm found a Pareto front representing a trade-off between the used criteria. Trees in the Pareto front were statistically validated using the SH-test, which has shown that a number of intermediate solutions from PhyloMOEA are consistent with solutions found by phylogenetic methods using one criterion. Moreover, clade support values from trees found by PhyloMOEA was compared to clade posterior probabilities obtained by Mr.Bayes. Results indicate a correlation between these probabilities for several clades. In summary, PhyloMOEA is able to find diverse intermediate solutions, which are not statistically worse than the best solutions for the maximum parsimony and maximum likelihood criteria. Moreover, intermediate solutions represent a trade-off between these criteria

Despite the continuous evolution in computers and information technology, real-world combinatorial optimization problems are NP-problems, in particular in the domain of planning and scheduling. Thus, although exact techniques from the Operations Research (OR) field, such as Linear Programming, could be applied to solve optimization problems, they are difficult to apply in real-world scenarios since they usually require too much computational time, i.e: an optimized solution is required at an affordable computational time. Furthermore, decision makers often face different and typically opposing goals, then resulting multi-objective optimization problems. Therefore, approximate techniques from the Artificial Intelligence (AI) field are commonly used to solve the real world problems. The AI techniques provide richer and more flexible representations of real-world (Gomes 2000), and they are widely used to solve these type of problems. AI heuristic techniques do not guarantee the optimal solution, but they provide near-optimal solutions in a reasonable time. These techniques are divided into two broad classes of algorithms: constructive and local search methods (Aarts and Lenstra 2003). They can guide their search processes by means of heuristics or metaheuristics depending on how they escape from local optima (Blum and Roli 2003). Regarding multi-objective optimization problems, the use of AI techniques becomes paramount due to their complexity (Coello Coello 2006). Nowadays, the point of view for planning and scheduling tasks has changed. Due to the fact that real world is uncertain, imprecise and non-deterministic, there might be unknown information, breakdowns, incidences or changes, which become the initial plans or schedules invalid. Thus, there is a new trend to cope these aspects in the optimization techniques, and to seek robust solutions (schedules) (Lambrechts, Demeulemeester, and Herroelen 2008). In this way, these optimization problems become harder since a new objective function (robustness measure) must be taken into account during the solution search. Therefore, the robustness concept is being studied and a general robustness measure has been developed for any scheduling problem (such as Job Shop Problem, Open Shop Problem, Railway Scheduling or Vehicle Routing Problem). To this end, in this thesis, some techniques have been developed to improve the search of optimized and robust solutions in planning and scheduling problems. These techniques offer assistance to decision makers to help in planning and scheduling tasks, determine the consequences of changes, provide support in the resolution of incidents, provide alternative plans, etc. As a case study to evaluate the behaviour of the techniques developed, this thesis focuses on problems related to container terminals. Container terminals generally serve as a transshipment zone between ships and land vehicles (trains or trucks). In (Henesey 2006a), it is shown how this transshipment market has grown rapidly. Container terminals are open systems with three distinguishable areas: the berth area, the storage yard, and the terminal receipt and delivery gate area. Each one presents different planning and scheduling problems to be optimized (Stahlbock and Voß 2008). For example, berth allocation, quay crane assignment, stowage planning, and quay crane scheduling must be managed in the berthing area; the container stacking problem, yard crane scheduling, and horizontal transport operations must be carried out in the yard area; and the hinterland operations must be solved in the landside area. Furthermore, dynamism is also present in container terminals. The tasks of the container terminals take place in an environment susceptible of breakdowns or incidences. For instance, a Quay Crane engine stopped working and needs to be revised, delaying this task one or two hours. Thereby, the robustness concept can be included in the scheduling techniques to take into consideration some incidences and return a set of robust schedules. In this thesis, we have developed a new domain-dependent planner to obtain more effi- cient solutions in the generic problem of reshuffles of containers. Planning heuristics and optimization criteria developed have been evaluated on realistic problems and they are applicable to the general problem of reshuffling in blocks world scenarios. Additionally, we have developed a scheduling model, using constructive metaheuristic techniques on a complex problem that combines sequences of scenarios with different types of resources (Berth Allocation, Quay Crane Assignment, and Container Stacking problems). These problems are usually solved separately and their integration allows more optimized solutions. Moreover, in order to address the impact and changes that arise in dynamic real-world environments, a robustness model has been developed for scheduling tasks. This model has been applied to metaheuristic schemes, which are based on genetic algorithms. The extension of such schemes, incorporating the robustness model developed, allows us to evaluate and obtain more robust solutions. This approach, combined with the classical optimality criterion in scheduling problems, allows us to obtain, in an efficient in way, optimized solution able to withstand a greater degree of incidents that occur in dynamic scenarios. Thus, a proactive approach is applied to the problem that arises with the presence of incidences and changes that occur in typical scheduling problems of a dynamic real world. / Rodríguez Molins, M. (2015). Optimization and Robustness in Planning and Scheduling Problems. Application to Container Terminals [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/48545 / TESIS

In view of the problem of uneven load distribution and energy consumption among nodes in a multi-hop wireless sensor network, this research constructs the routing schedule problem as a MOP (Multi-objective Optimization Problem), and proposed an energy-aware routing optimization scheme RDSEGA based on multi-objective optimization. In this scheme, in order to avoid the searching space explosion problem caused by the increase of nodes, KSP Yen's algorithm was applied to prune the searching space, and the candidate paths selected after pruning are recoded based on priority. Then adopted the improved strengthen elitist genetic algorithm to get the entire network routing optimization scheme with the best energy efficiency. At the same time, in view of the problem of routing discontinuity in the process of path crossover and mutation, new crossover and mutation method was proposed that based on the gene fragments connected by the adjacent node or the same node to maximize the effectiveness of the evolution result. The experimental results prove that the scheme reduced the energy consumption of nodes in the network, the load between nodes becomes more balanced, and the working time of the network has been prolonged nearly 40% after the optimization. This brings convenience to practical applications, especially for those that are inconvenient to replace nodes.

[EN] Bridges, as an important component of infrastructure, are expected to meet all the requirements for a modern society. Traditionally, the primary aim in bridge design has been to achieve the lowest cost while guaranteeing the structural efficiency. However, concerns regarding building a more sustainable future have change the priorities of society. Ecological and durable structures are increasingly demanded. Under these premises, heuristic optimization methods provide an effective alternative to structural designs based on experience. The emergence of new materials, structural designs and sustainable criteria motivate the need to create a methodology for the automatic and accurate design of a real post-tensioned concrete bridge that considers all these aspects. For the first time, this thesis studies the efficient design of post-tensioned concrete box-girder road bridges from a sustainable point of view. This research integrates environmental, safety and durability criteria into the optimum design of the bridge. The methodology proposed provides multiple trade-off solutions that hardly increase the cost and achieve improved safety and durability. Likewise, this approach quantifies the sustainable criteria in economic terms, and evaluates the effect of these criteria on the best values of the variables. In this context, a multi-objective optimization is formulated to provide multiple trade-off and high-performing solutions that balance economic, ecologic and societal goals. An optimization design program selects the best geometry, concrete type, reinforcement and post-tensioning steel that meet the objectives selected. A three-span continuous box-girder road bridge located in a coastal region is selected for a case study. This approach provides vital knowledge about this type of bridge in the sustainable context. The life-cycle perspective has been included through a lifetime performance evaluation that models the bridge deterioration process due to chloride-induced corrosion. The economic, environmental and societal impacts of maintenance actions required to extend the service life are examined. Therefore, the proposed goals for an efficient design have been switch from initial stage to life-cycle consideration. Faced with the large computational time of multi-objective optimization and finite-element analysis, artificial neural networks (ANNs) are integrated in the proposed methodology. ANNs are trained to predict the structural response based on the design variables, without the need to analyze the bridge response. The multi-objective optimization problem results in a set of trade-off solutions characterized by the presence of conflicting objectives. The final selection of preferred solutions is simplified by a decision-making technique. A rational technique converts a verbal pairwise comparison between criteria with a degree of uncertainty into numerical values that guarantee the consistency of judgments. This thesis gives a guide for the sustainable design of concrete structures. The use of the proposed approach leads to designs with lower life-cycle cost and emissions compared to general design approaches. Both bridge safety and durability can be improved with a little cost increment by choosing the correct design variables. In addition, this methodology is applicable to any type of structure and material. / [ES] Los puentes, como parte importante de una infraestructura, se espera que reúnan todos los requisitos de una sociedad moderna. Tradicionalmente, el objetivo principal en el diseño de puentes ha sido lograr el menor coste mientras se garantiza la eficiencia estructural. Sin embargo, la preocupación por construir un futuro más sostenible ha provocado un cambio en las prioridades de la sociedad. Estructuras más ecológicas y duraderas son cada vez más demandadas. Bajo estas premisas, los métodos de optimización heurística proporcionan una alternativa eficaz a los diseños estructurales basados en la experiencia. La aparición de nuevos materiales, diseños estructurales y criterios sostenibles motivan la necesidad de crear una metodología para el diseño automático y preciso de un puente real de hormigón postesado que considere todos estos aspectos. Por primera vez, esta tesis estudia el diseño eficiente de puentes de hormigón postesado con sección en cajón desde un punto de vista sostenible. Esta investigación integra criterios ambientales, de seguridad estructural y durabilidad en el diseño óptimo del puente. La metodología propuesta proporciona múltiples soluciones que apenas encarecen el coste y mejoran la seguridad y durabilidad. Al mismo tiempo, se cuantifica el enfoque sostenible en términos económicos, y se evalúa el efecto que tienen dichos criterios en el valor óptimo de las variables. En este contexto, se formula una optimización multiobjetivo que proporciona soluciones eficientes y de compromiso entre los criterios económicos, ecológicos y sociales. Un programa de optimización del diseño selecciona la mejor combinación de geometría, tipo de hormigón, armadura y postesado que cumpla con los objetivos seleccionados. Se ha escogido como caso de estudio un puente continuo en cajón de tres vanos situado en la costa. Este método proporciona un mayor conocimiento sobre esta tipología de puentes desde un punto de vista sostenible. Se ha estudiado el ciclo de vida a través de la evaluación del deterioro estructural del puente debido al ataque por cloruros. Se examina el impacto económico, ambiental y social que produce el mantenimiento necesario para extender la vida útil del puente. Por lo tanto, los objetivos propuestos para un diseño eficiente han sido trasladados desde la etapa inicial hasta la consideración del ciclo de vida. Para solucionar el problema del elevado tiempo de cálculo debido a la optimización multiobjetivo y el análisis por elementos finitos, se han integrado redes neuronales en la metodología propuesta. Las redes neuronales son entrenadas para predecir la respuesta estructural a partir de las variables de diseño, sin la necesidad de analizar el puente. El problema de optimización multiobjetivo se traduce en un conjunto de soluciones de compromiso que representan objetivos contrapuestos. La selección final de las soluciones preferidas se simplifica mediante una técnica de toma de decisiones. Una técnica estructurada convierte los juicios basados en comparaciones por pares de elementos con un grado de incertidumbre en valores numéricos que garantizan la consistencia de dichos juicios. Esta tesis proporciona una guía que extiende y mejora las recomendaciones sobre el diseño de estructuras de hormigón dentro del contexto de desarrollo sostenible. El uso de la metodología propuesta lleva a diseños con menor coste y emisiones del ciclo de vida, comparado con diseños que siguen metodologías generales. Los resultados demuestran que mediante una correcta elección del valor de las variables se puede mejorar la seguridad y durabilidad del puente con un pequeño incremento del coste. Además, esta metodología es aplicable a cualquier tipo de estructura y material. / [CAT] Els ponts, com a part important d'una infraestructura, s'espera que reunisquen tots els requisits d'una societat moderna. Tradicionalment, l'objectiu principal en el disseny de ponts ha sigut aconseguir el menor cost mentres es garantix l'eficiència estructural. No obstant això, la preocupació per construir un futur més sostenible ha provocat un canvi en les prioritats de la societat. Estructures més ecològiques i durables són cada vegada més demandades. Davall estes premisses, els mètodes d'optimització heurística proporcionen una alternativa eficaç als dissenys estructurals basats en l'experiència. L'aparició de nous materials, dissenys estructurals i criteris sostenibles motiven la necessitat de crear una metodologia per al disseny automàtic i precís d'un pont real de formigó posttesat que considere tots estos aspectos. Per primera vegada, esta tesi estudia el disseny eficient de ponts de formigó posttesat amb secció en calaix des d'un punt de vista sostenible. Esta investigació integra criteris ambientals, de seguretat estructural i durabilitat en el disseny òptim del pont. La metodologia proposada proporciona múltiples solucions que a penes encarixen el cost i milloren la seguretat i durabilitat. Al mateix temps, es quantifica l'enfocament sostenible en termes econòmics, i s'avalua l'efecte que tenen els dits criteris en el valor òptim de les variables. En este context, es formula una optimització multiobjetivo que proporciona solucions eficients i de compromís entre els criteris econòmics, ecològics i socials. Un programa d'optimització del disseny selecciona la millor geometria, tipus de formigó, armadura i posttesat que complisquen amb els objectius seleccionats. S'ha triat com a cas d'estudi un pont continu en calaix de tres vans situat en la costa. Este mètode proporciona un major coneixement sobre esta tipologia de ponts des d'un punt de vista sostenible. S'ha estudiat el cicle de vida a través de l'avaluació del deteriorament estructural del pont a causa de l'atac per clorurs. S'examina l'impacte econòmic, ambiental i social que produïx el manteniment necessari per a estendre la vida útil del pont. Per tant, els objectius proposats per a un disseny eficient han sigut traslladats des de l'etapa inicial fins a la consideració del cicle de vida. Per a solucionar el problema de l'elevat temps de càlcul degut a l'optimització multiobjetivo i l'anàlisi per elements finits, s'han integrat xarxes neuronals en la metodologia proposada. Les xarxes neuronals són entrenades per a predir la resposta estructural a partir de les variables de disseny, sense la necessitat d'analitzar el pont. El problema d'optimització multiobjetivo es traduïx en un conjunt de solucions de compromís que representen objectius contraposats. La selecció final de les solucions preferides se simplifica per mitjà d'una tècnica de presa de decisions. Una tècnica estructurada convertix els juís basats en comparacions per parells d'elements amb un grau d'incertesa en valors numèrics que garantixen la consistència dels dits juís. Esta tesi proporciona una guia que estén i millora les recomanacions sobre el disseny d'estructures de formigó dins del context de desenrotllament sostenible. L'ús de la metodologia proposada porta a dissenys amb menor cost i emissions del cicle de vida, comparat amb dissenys que seguixen metodologies generals. Els resultats demostren que per mitjà d'una correcta elecció del valor de les variables es pot millorar la seguretat i durabilitat del pont amb un xicotet increment del cost. A més, esta metodologia és aplicable a qualsevol tipus d'estructura i material. / García Segura, T. (2016). Efficient design of post-tensioned concrete box-girder road bridges based on sustainable multi-objective criteria [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/73147 / TESIS