Tip60 is a 60 kDa nuclear protein which exists in three isoforms, belongs to the MYST/HAT family of proteins and was discovered after its interaction with the Human HIV-1 Tat. As a nuclear protein, Tip60 can act as a coactivator or repressor. To understand the HAT action of Tip60, two possible catalytic models exist; the ping-pong and the ternary complex formation models. In correlation with the exploration of HAT catalytic action, mutations of a Cys to Ala and a Glu to Gln on Esa1 (yeast homolog of Tip60 and MYST/HAT prototype), was reported to show wild type-like and decreased acetylating properties, respectively. In this work, Tip60 HAT action was explored. In Tip60, the Cys in the active site is important for acetylation of the H4(1-20) substrate and the Glu showed semi loss in acetylating the H4(1-20) peptide substrate. These data highlight a unique mechanism of Tip60 catalysis.

The persistence and propagation of bacterial antibiotic resistance presents significant challenges to the treatment of drug resistant bacteria with current antimicrobial chemotherapies, while a dearth in replacements for these drugs persists. The thiopeptide family of antibiotics may represent a potential source for new drugs and thiostrepton, the prototypical member of this antibiotic class, is the primary subject under study in this thesis. Using a facile semi-synthetic approach novel, regioselectively-modified thiostrepton derivatives with improved aqueous solubility were prepared. In vivo assessments found these derivatives to retain significant antibacterial ability which was determined by cell free assays to be due to the inhibition of protein synthesis. Moreover, structure-function studies for these derivatives highlighted structural elements of the thiostrepton molecule that are important for antibacterial activity. Organisms that produce thiostrepton become insensitive to the antibiotic by producing a resistance enzyme that transfers a methyl group from the co-factor S-adenosyl-L-methionine (AdoMet) to an adenosine residue at the thiostrepton binding site on 23S rRNA, thus preventing binding of the antibiotic. Extensive site-directed mutagenesis was performed on this enzyme to generate point mutations at key active site residues. Ensuing biochemical assays and co-factor binding studies on these variants identified amino acid residues in the active site that are essential to the formation of the AdoMet binding pocket and provided direct evidence for the involvement of an active site arginine in the catalytic mechanism of the enzyme. Certain bacteria that produce neither thiostrepton nor the resistance methyltransferase express the thiostrepton binding proteins TIP-AL and TIP-AS, that irreversibly bind to the antibiotic, thereby conferring resistance by sequestration. Here, it was found that the point mutation of the previously identified reactive amino acid in TIP-AS did not affect covalent binding to the antibiotic, which was immediately suggestive of a specific, high affinity non-covalent interaction. This was confirmed in binding studies using chemically synthesized thiostrepton derivatives. These studies further revealed structural features from thiostrepton important in this non-covalent interaction. Together, these results indicate that thiostrepton binding by TIP-AS begins with a specific non-covalent interaction, which is necessary to properly orient the thiostrepton molecule for covalent binding to the protein. Finally, the synthesis of a novel AdoMet analogue is reported. The methyl group of AdoMet was successfully replaced with a trifluoromethyl ketone moiety, however, the hydrated form (germinal diol) of this compound was found to predominate in solution. Nevertheless, the transfer of this trifluoroketone/ trifluoropropane diol group was demonstrated with the thiopurine methyltransferase.

The versatile Escherichia coli facilitates protein expression with relative simplicity, high cell density on inexpensive substrates, well known genetics, variety of expression vectors, mutant strains, co-overexpression technology, extracytoplasmic secretion systems, and recombinant protein fusion partners. Although, the protocol is rather simple for soluble proteins, heterologous protein expression is frequently encountered by major technical limitations including inefficient translation, formation of insoluble inclusion bodies, lack of posttranslational modification mechanisms, degradation by host proteases, and impaired cell physiology due to host/protein toxicity, in achieving functional expression of stable, soluble, and bioactive protein.. In this thesis, model protein expression systems are used to address the technical issues for enhancing recombinant protein expression in E. coli. When yellow fluorescence protein (YFP) was displayed on E. coli cell surface, the integrity of the cell envelope was compromised and cell physiology was severely impaired, resulting in poor display performance, which was restored by the coexpression of Skp, a periplasmic chaperone. On the basis of monitoring the promoter activities of degP, rpoH, and cpxP under various culture conditions, it was demonstrated that the cell-surface display induced the σE extracytoplasmic stress response, and PdegP::lacZ was proposed to be a suitable “sensor” for monitoring extracytoplasmic stress. Intracellular proteolysis has been recognized as one of the key factors limiting recombinant protein production, particularly for eukaryotic proteins heterologously expressed in the prokaryotic expression systems of E. coli. Two amino acids, Leu149 and Val223, were identified as proteolytically sensitive when Pseudozyma antarctica lipase (PalB) was heterologously expressed in Escherichia coli. The functional expression was enhanced using the double mutant for cultivation. However, the recombinant protein production was still limited by PalB misfolding, which was resolved by DsbA coexpression. The study offers an alternative genetic strategy in molecular manipulation to enhance recombinant protein production in E. coli. To overcome the technical limitations of protein misfolding, ineffective disulfide bond formation, and protein instability associated with intracellular proteolysis in the functional expression of recombinant Pseudozyma antarctica lipase B (PalB) in Escherichia coli, an alternative approach was explored by extracellular secretion of PalB via two Sec-independent secretion systems, i.e. the α-hemolysin (Type I) and the modified flagellar (Type III) secretion systems, which can export proteins of interest from the cytoplasm directly to the exterior of the cell. Bioactive PalB was expressed and secreted extracellularly either as HlyA fusion (i.e. PalB-HlyA via Type I system) or an intact protein (via Type III system) with minimum impact on cell physiology. However, the secretion intermediates in the intracellular fraction of culture samples were non-bioactive even though they were soluble, suggesting that the extracellular secretion did mediate the development of PalB activity. PalB secretion via Type I system was fast with higher specific PalB activities but poor cell growth. On the other hand, the secretion via Type III system was slow with lower specific PalB activities but effective cell growth. Functional expression of lipase from Burkholderia sp. C20 (Lip) in various cellular compartments of Escherichia coli was explored. The poor expression in the cytoplasm was improved by several strategies, including coexpression of the cytoplasmic chaperone GroEL/ES, using a mutant E. coli host strain with an oxidative cytoplasm, and protein fusion technology. Fusing Lip with the N-terminal peptide tags of T7PK, DsbA, and DsbC was effective in boosting the solubility and biological activity. Non-fused Lip or Lip fusions heterologously expressed in the periplasm formed insoluble aggregates with a minimum activity. Biologically active and intact Lip was obtained upon the secretion into the extracellular medium using the native signal peptide and the expression performance was further improved by coexpression of the periplasmic chaperon Skp. The extracellular expression was even more effective when Lip was secreted as a Lip-HlyA fusion via the α-hemolysin transporter. Finally, Lip could be functionally displayed on the E. coli cell surface when fused with the carrier EstA.

The versatile Escherichia coli facilitates protein expression with relative simplicity, high cell density on inexpensive substrates, well known genetics, variety of expression vectors, mutant strains, co-overexpression technology, extracytoplasmic secretion systems, and recombinant protein fusion partners. Although, the protocol is rather simple for soluble proteins, heterologous protein expression is frequently encountered by major technical limitations including inefficient translation, formation of insoluble inclusion bodies, lack of posttranslational modification mechanisms, degradation by host proteases, and impaired cell physiology due to host/protein toxicity, in achieving functional expression of stable, soluble, and bioactive protein.. In this thesis, model protein expression systems are used to address the technical issues for enhancing recombinant protein expression in E. coli. When yellow fluorescence protein (YFP) was displayed on E. coli cell surface, the integrity of the cell envelope was compromised and cell physiology was severely impaired, resulting in poor display performance, which was restored by the coexpression of Skp, a periplasmic chaperone. On the basis of monitoring the promoter activities of degP, rpoH, and cpxP under various culture conditions, it was demonstrated that the cell-surface display induced the σE extracytoplasmic stress response, and PdegP::lacZ was proposed to be a suitable “sensor” for monitoring extracytoplasmic stress. Intracellular proteolysis has been recognized as one of the key factors limiting recombinant protein production, particularly for eukaryotic proteins heterologously expressed in the prokaryotic expression systems of E. coli. Two amino acids, Leu149 and Val223, were identified as proteolytically sensitive when Pseudozyma antarctica lipase (PalB) was heterologously expressed in Escherichia coli. The functional expression was enhanced using the double mutant for cultivation. However, the recombinant protein production was still limited by PalB misfolding, which was resolved by DsbA coexpression. The study offers an alternative genetic strategy in molecular manipulation to enhance recombinant protein production in E. coli. To overcome the technical limitations of protein misfolding, ineffective disulfide bond formation, and protein instability associated with intracellular proteolysis in the functional expression of recombinant Pseudozyma antarctica lipase B (PalB) in Escherichia coli, an alternative approach was explored by extracellular secretion of PalB via two Sec-independent secretion systems, i.e. the α-hemolysin (Type I) and the modified flagellar (Type III) secretion systems, which can export proteins of interest from the cytoplasm directly to the exterior of the cell. Bioactive PalB was expressed and secreted extracellularly either as HlyA fusion (i.e. PalB-HlyA via Type I system) or an intact protein (via Type III system) with minimum impact on cell physiology. However, the secretion intermediates in the intracellular fraction of culture samples were non-bioactive even though they were soluble, suggesting that the extracellular secretion did mediate the development of PalB activity. PalB secretion via Type I system was fast with higher specific PalB activities but poor cell growth. On the other hand, the secretion via Type III system was slow with lower specific PalB activities but effective cell growth. Functional expression of lipase from Burkholderia sp. C20 (Lip) in various cellular compartments of Escherichia coli was explored. The poor expression in the cytoplasm was improved by several strategies, including coexpression of the cytoplasmic chaperone GroEL/ES, using a mutant E. coli host strain with an oxidative cytoplasm, and protein fusion technology. Fusing Lip with the N-terminal peptide tags of T7PK, DsbA, and DsbC was effective in boosting the solubility and biological activity. Non-fused Lip or Lip fusions heterologously expressed in the periplasm formed insoluble aggregates with a minimum activity. Biologically active and intact Lip was obtained upon the secretion into the extracellular medium using the native signal peptide and the expression performance was further improved by coexpression of the periplasmic chaperon Skp. The extracellular expression was even more effective when Lip was secreted as a Lip-HlyA fusion via the α-hemolysin transporter. Finally, Lip could be functionally displayed on the E. coli cell surface when fused with the carrier EstA.

The human vitamin D receptor (hVDR) is a member of the nuclear receptor superfamily, involved in calcium and phosphate homeostasis; hence implicated in a number of diseases, such as Rickets and Osteoporosis. This receptor binds 1α,25-dihydroxyvitamin D3 (also referred to as 1,25(OH)2D3) and other known ligands, such as lithocholic acid. Specific interactions between the receptor and ligand are crucial for the function and activation of this receptor, as implied by the single point mutation, H305Q, causing symptoms of Type II Rickets. In this work, further understanding of the significant and essential interactions between the ligand and the receptor were deciphered, through a combination of rational and random mutagenesis. A hVDR mutant, H305F, was engineered with increased sensitivity towards lithocholic acid, with an EC50 value of 10 µM and 40 + 14 fold activation in mammalian cell assays, while maintaining wild-type activity with 1,25(OH)2D3. Furthermore, via random mutagenesis, a hVDR mutant, H305F/H397Y, was discovered to bind a novel small molecule, cholecalciferol, a precursor in the 1α,25-dihydroxyvitamin D3 biosynthetic pathway, which does not activate wild-type hVDR. This variant, H305F/H397Y, binds and activates in response to cholecalciferol concentrations as low as 100 nM, with an EC50 value of 300 nM and 70 + 11 fold activation in mammalian cell assays.

This thesis describes studies directed towards understanding structure-function relationships of triosephosphate isomerase (TIM), from a protozoan parasite Plasmodium falciparum and a thermophilic archaea Methanocaldococcus jannaschii. Triosephosphate isomerase, a ubiquitous glycolytic enzyme, has been the subject of biochemical, enzymatic and structural studies for the last five decades. Studies on TIM have been central to the development of mechanistic enzymology. The present study investigates the role of specific residues in the structure and function of Plasmodium falciparum triosephosphate isomerase (PfTIM). The structure and stability of a tetrameric triosephosphate isomerase from Methanocaldococcus jannaschii (MjTIM) is also presented. Chapter 1 provides a general introduction to the glycolytic enzyme triosephosphate isomerase, conservation of TIM sequences, its fold and three dimensional organization. The isomerisation reaction interconverting dihydroxyacetone phosphate and glyceraldehyde 3phosphate catalyzed by triosephosphate isomerase is an example of a highly stereospecific proton transfer process (Hall & Knowles, 1975; Rieder & Rose, 1959). This chapter briefly reviews mechanistic features and discusses the role of active site residues and the functional flexible loop 6. Triosephosphate isomerase adopts the widely occurring ( β/ α)8 barrel fold and mostly occurs as a dimer (Banner et al., 1975). Protein engineering studies, related to folding, stability and design of monomeric TIM are also addressed. A brief introduction to thermophilic TIMs and higher oligomeric TIMs is given. The role of this enzyme in disease states like hemolytic anemia and neuromuscular dysfunction is surveyed. The production of methylglyoxal, a toxic metabolite, as a byproduct of the TIM reaction is also considered. Many proteins utilize segmental motions to catalyze a specific reaction. The omega loop (loop 6) of triosephosphate isomerase is important for preventing the ene-diol intermediate from forming the cytotoxic byproduct, methylglyoxal. The active site loop-6 of triosephosphate isomerase moves about 7Ǻ on ligand binding. It exhibits a hinged lid motion alternating between two well defined, “open” and “closed”, conformations (Joseph et al., 1990). Though the movement of loop 6 is not ligand gated, in crystals the ligand bound forms invariably reveal a closed loop conformation. Plasmodium falciparum TIM is an exception which predominantly exhibits “open” loop conformations, even in the ligand bound state (Parthasarathy et al., 2002). Phe 96 is a key residue that is involved in contacts between the flexible loop-6 and the protein body in PfTIM. Notably, in all TIM sequences determined thus far, with the exception of plasmodial sequences, this residue is Ser 96. In Chapter 2 the mutants F96S, F96H and F96W are reported. The crystal structures of the mutant enzymes with or without bound ligand are described. In all the ligand free cases, loop-6 adopts an “open” conformation. Kinetic parameters for all the mutants establish that residue 96 does not play an essential role in modulating the loop conformation but may be important for ligand binding. Structural analysis of the mutants along with WT enzyme reveals the presence of a water network which can modulate ligand binding. Subunit interfaces of oligomeric proteins provide an opportunity to understand protein- protein interactions. Chapter 3 describes biochemical and biophysical studies on two separate dimer-interface destabilizing mutants C13E and W11F/W168F/Y74W of PfTIM. The intention was to generate a stable monomer by disrupting the interaction hubs. C13 is a part of a large hydrophobic patch (Maithal et al., 2002a) at the dimer interface. Introduction of a negative charge at position 13 destabilizes the interface and reduces activity. Y74 is a part of an aromatic cluster of the interface (Maithal et al., 2002b). The Y74W triple mutant was designed to disrupt the aromatic cluster by introducing additional atoms. Tryptophan is also a fluorophore, allowing studies of the dimer disruption by fluorescence, after mutating the two inherent tryptophan residues, W11 and W168 to phenylalanine. The mutants showed reduced activity and were more sensitive than the wild type enzyme to chemical denaturants as well as thermal denaturation. Evidenced for monomer formation is presented. These studies together with previous work reveal that the interface is important for both activity and stability. In order to develop a model for understanding the relationship between protein stabilization and oligomeric status, characterization of the TIM from Methanocaldococcus jannaschii (MjTIM) has been undertaken. Chapter 4 describes the purification and characterization of MjTIM. The MjTIM gene was cloned and expressed in pTrc99A and protein was isolated from AA200 E. coli cells. Hyperexpressed protein was purified to homogeneity and relevant kinetic parameters have been determined. The tetrameric nature of MjTIM is established by gel filtration studies. Circular dichroism (CD) studies establish the stability of the overall fold, even at temperatures as high as 95ºC. A surprising loss of enzyme activity upon prolonged incubation at high temperature was observed. ESI-MS studies establish that oxidation of thiol groups of the protein may be responsible for the thermal inactivation. Chapter 5 describes the molecular structure of MjTIM, determined in collaboration with Prof. MRN Murthy’s group at the Indian Institute of Science (Gayathri et al., 2007). The crystal structure of the recombinant triosephosphate isomerase (TIM) from the archaeabacteria Methanocaldococcus jannaschii has been determined at a resolution of 2.3 Å. MjTIM is tetrameric, as suggested by solution studies and from the crystal structure, as in the case of two other structurally characterised archaeal TIMs. The archaeabacterial TIMs are shorter compared to the dimeric TIMs, with the insertions in the dimeric TIMs occurring in the vicinity of the putative tetramer interface, resulting in a hindrance to tetramerization in the dimeric TIMs. The charge distribution on the surface of archaeal TIMs also facilitates tetramerization. Analysis of the barrel interactions in TIMs suggests that these interactions are unlikely to account for the thermal stability of archaeal TIMs. A feature of the unliganded structure of MjTIM is the complete absence of electron density for the loop 6 residues. The disorder of the loop may be ascribed to a missing salt bridge between residues at the N- and C- terminal ends of the loop in MjTIM. Chapter 6 is a follow up of an interesting observation made by Vogel and Chmielewski (1994), who noticed that subtilisin cleaved rabbit muscle triosephosphate isomerase religated spontaneously upon addition of organic solvents. Further extension of this nicking and religation process with PfTIM emphasizes the importance of tertiary interactions in contributing to the stability of the (β/α)8 barrel folds (Ray et al., 1999). This chapter establishes that subtilisin nicking and religation is also facile in thermophilic MjTIM. Fragments generated by subtilisin nicking were identified using MALDI mass spectrometry at early and late stages of the cleavage for both the dimeric PfTIM and tetrameric MjTIM. This chapter also describes the comparative thermal and denaturant stability of both the enzymes. The accessibility of the Cys residues of MjTIM has been probed by examining the rates of labeling of thiol groups by iodoacetamide. The differential labeling of Cys residues has been demonstrated by mass spectrometry. Chapter 7 summarizes the main results and conclusions of the studies described in this thesis.

Cyclodextrin glucanotransferase (EC 2.4.1.19) from the alkaliphilic Bacillus sp. G-825-6 converts starch mainly to c-cyclodextrin (CD8). A combination of error-prone PCR and DNA shuffling was used to obtain variants of this enzyme with higher product specificity for CD8 and a broad pH activity range. The variant S54 with seven amino acid substitutions showed a 1.2-fold increase in CD8-synthesizing activity and the product ratio of CD7:CD8 was shifted to 1:7 compared to 1:3 of the wild-type enzyme. Nine amino acid substitutions of the cyclodextrin glucanotransferase were performed to generate the variant S35 active in a pH range 4.0–10.0. Compared to the wild-type enzyme which is inactive below pH 6.0, S35 retained 70% of its CD8-synthesizing activity at pH 4.0.

No description available.

No description available.

In the breeding of grain sorghum (Sorghum bicolour L. Moench) towards improved nutrition and agronomic performance, new methodologies are required to increase genetic diversity and lower the inputs required to track and screen breeding populations. Near-infrared calibration models were developed by partial least squares (PLS) and test-set validation on 364 sorghum samples to predict crude protein and moisture content on whole-grain and milled flour samples. Models using milled flour spectra were more accurately predictive than those from whole grain spectra for all constituents (eg. Protein: R2 = 0.986 on flour vs R2 = 0.962 on whole grain). Discriminant calibrations were established to classify grain colour using partial least squares discriminant analysis (PLS-DA) based upon CIE L*a*b* reference values and visual ranking. Preliminary calibrations were developed for quantities of 18 amino acids, fat and apparent metabolisable energy (AME) on 40 samples using cross-validation, highlighting potential for reliable calibration for these parameters in sorghum. An investigation into the potential of 12C6+ heavy-ion beam mutagenesis of sorghum seed was undertaken by treatment at RIKEN Accelerator Research Facility (Saitama, Japan) and subsequent breeding at Ukulinga research farm and analysis at the Department of Plant Pathology, University of KwaZulu-Natal, Pietermaritzburg, South Africa. Dosage rates of 75, 100 and 150 Gy were compared in seven sorghum varieties to establish optimal dose treatments as determined by germination and survival rates, visible morphological changes and field data over two seasons of field trials. Crude protein variation within the M2 generation was analysed to compare dose rate effects. The need for higher dose rates was indicated by few quantified differences between treatments and control although good correlations between protein deviation and treatment dose rate were elucidated. Differences in varietal response suggest a need to optimize dose rate for specific varieties in future endeavours. In addition, all mutagenized populations were screened for crude protein content using near-infrared spectroscopy (NIRS). Significant differences in protein levels and standard deviations were observed between treated self-pollinated M2 generations and untreated control populations. Individual plants displaying significantly different protein levels were isolated. / Thesis (M.Sc.)-University of KwaZulu-Natal, Pietermaritzburg, 2009.