[pt] O presente trabalho apresenta um estudo experimental da distribuição da fuligem e de hidrocarbonetos aromáticos policíclicos (PAH) em chamas laminares não pré-misturadas de etileno e ar, mediante o uso de técnicas de diagnóstico espectroscópico, num queimador tipo co-flow. Para este fim são aplicadas as técnicas de fluorescência induzida por plano laser e incandescência induzida por plano laser, com excitação no espectro ultravioleta. Bandas espectrais de detecção centradas em 340, 400, 450, 500, 550 nm são empregadas para caracterizar diferentes PAH, aproveitado o fenômeno do deslocamento do espectros de fluorescência para o infravermelho, conforme se incrementa sua massa molecular. A técnica de extinção laser é utilizada para calibrar os resultados de incandescência e obter a fração volumétrica de fuligem. A radiação espontânea emitida pela fuligem é utilizada para medir a temperatura pela técnica de termometria em duas cores. A comparação dos resultados obtidos com uma detecção simultânea (0 ns) e atrasada (50 ns) com respeito ao pulso laser permite discriminar entre as regiões onde estão presentes PAHs e fuligem ou apenas fuligem. Os resultados mostram que na região mais fria, perto da entrada de combustível, apenas existem PAH. Seguindo esta região, numa zona de altura intermediária e mais quente, tanto a fuligem como o PAHs coexistem até a o ponto de máxima fração volumétrica integrada de fuligem. O deslocamento no sentido vertical da distribuição de fluorescência é observado com o aumento do comprimento de onda de detecção, o que é consistente com o crescimento do tamanho de PAH e sua progressiva transformação em fuligem. A distribuição de PAH e da fuligem é investigada como função da vazão de combustível. A fração volumétrica de fuligem apresenta uma distribuição clássica, cujo valor se incrementa com a vazão de combustível, enquanto que a temperatura medida diminui. / [en] This work presents an experimental study of soot and polycyclic aromatic hydrocarbons (PAH) distribution in axisymmetric ethylene-air non-premixe laminar flames using spectroscopic diagnostic in a co-flow target burner. For this purpose, are applied laser-induced fluorescence and laser-induced incandescence techniques with UV excitation. Spectral detection bands centered at 340, 400, 450, 500, 550 nm are employed to characterize PAH, using the infrared fluorescence spectra displacement phenomenon with the molecular mass increase. The incandescence is captured at 400 nm and the laser extinction technique is used to calibrate the signal, and, thus to obtain the soot volume fraction at the reaction zone. The soot spontaneous emitted radiation is used to measure the temperature by the two-color pyrometry technique. The comparison between results with prompt (0 ns) and delayed (50 ns) detection, with respect to the laser pulse, allows to discriminate the regions between soot precursors (PAH) and soot. The results show that, in the colder region, near the fuel inlet, PAH exist only. Following this region, in an intermediate warmer zone, both soot and PAH appear to coexist until the point of maximum integral soot volumetric fraction. A vertical displacement of the fluorescence distribution with increasing detection wavelength is observed, which is consistent with PAH size growth and with its progressive transformation into soot. PAH and soot distribution are investigated as a function of the fuel flow rate. The soot volumetric fraction exhibits a classical distribution, whose value increases with the fuel flow rate, whereas the measured temperature decreases, exhibiting a singular behavior in the region where the soot is formed.

This thesis deals with a path planning using cellular automata algorithms in a rectangular grid environment. Theoretical part starts with an overview of commonly used approaches for path planning and later on focuses on existing cellular automata solutions and capabilities in detail. Implemented cellular automata algorithms and the commonly used path planning algorithms are together with a map generator described in the practical part. Conclusion of this thesis contains results completed in a special application.

No description available.

The objective of this work is to enhance the awareness of the indoor propagation behaviour, by a set of investigations including simulations and measurements. These investigations include indoor propagation behaviour, local mean power estimation, proposing new indoor path loss model and introducing a case study on 60 GHz propagation in indoor environments using ray tracing and measurements. A summary of propagation mechanisms and manifestations in the indoor environment is presented. This comprises the indoor localization techniques using channel parameters in terms of angle of arrival (AOA), time of arrival (TOA) and received signal strength (RSS). Different models of path loss, shadowing and fast fading mechanisms are explored. The concept of MIMO channels is studied using many types of deterministic channel modelling such as Finite Difference Time Domain, Ray tracing and Dominant path model. A comprehensive study on estimating local average of the received signal strength (RSS) for indoor multipath propagation is conducted. The effect of the required number of the RSS data and their Euclidian distances between the neighbours samples are investigated over 1D, 2D and 3D configurations. It was found that the effect of fast fading was reduced sufficiently using 2D horizontal’s arrangement with larger spacing configuration. A modified indoor path loss prediction model is presented namely effective wall loss model (EWLM). The modified model with wall correction factors is compared to other indoor path loss prediction models using simulation data (for 2.4, 5, 28, 60 and 73.5 GHz) and real-time measurements (for 2.4 and 5 GHz). Different operating frequencies and antenna polarizations are considered to verify the observations. In the simulation part, EWLM shows the best performance among other models. Similar observations were recorded from the experimental results. Finally, a detailed study on indoor propagation environment at 60 GHz is conducted. The study is supported by Line of Sight (LoS) and Non-LoS measurements data. The results were compared to the simulated ones using Wireless-InSite ray tracing software. Several experiments have confirmed the reliability of the modelling process based on adjusted material properties values from measurements.

<p>Civil engineering structures must provide an adequate and safe performance during their time of service, and the owners of these structures must have a reliable inspection strategy to ensure time-dependent damage does not become excessive. Visual inspection is the first step in every structural inspection; however, many elements in the majority of structures are difficult to access and require specialized personal and equipment. In an attempt to reduce the risk of the inspector and the cost of additional equipment, the use of Unmanned Aircraft Systems (UAS) has been increasing in the last years. The absence of standards and regulations regarding the use of UAS in inspection of structures has allowed the market to widely advertise Unmanned Aerial Vehicles (UAV) without protocols or qualifications that prove their effectiveness, leaving the owners of the structures to solely rely on claims of the vendors before deciding which technology suits their particular inspection needs. Focusing primarily on bridge inspection, this research aimed to address the lack of performance-based evaluation and standards for UAS, developing a validation criterion to evaluate a given UAS based on a repeatable test that resembles typical conditions in a structure. </p><p><br></p><p>Current applications of UAS in inspection of structures along with its advantages and limitations were studied to determine the current status of UAS technologies. A maximum typical rotor-tip-to-rotor-tip distance of an UAV was determined based on typical UAVs used in bridge inspection, and two main parameters were found to be relevant when flying close to structures: proximity effects in the UAV and availability of visual line of sight. Distances where proximity effects are relevant were determined based on several field inspections and flights close to structures. In addition, the use of supplementary technologies such as Global Positioning System (GPS) and Inertial Measurement Units (IMU) was studied to understand their effect during inspection. </p><p><br></p><p>Following the analysis, the author introduces the idea of a series of obstacles and elements inside an enclosed space that resemble components of bridge structures to be inspected using UAVs, allowing repeatability of the test by controlling outside parameters such as lighting condition, wind, precipitation, temperature, and GPS signal. Using distances based on proximity effects, maximum typical rotor-tip-to-rotor-tip distance, and a gallery of bridges and situations when flying close to bridge structures, a final arrangement of elements is presented as the evaluation chamber. Components inside the evaluation chamber include both “real” steel and concrete specimens as well as those intended to simulate various geometric configurations on which other features are mounted. Pictures of damages of steel and concrete elements have been placed in the internal faces of the obstacles that can be assessed either in real-time flight or in post-processing work. A detailed comparison between the objectives of this research project and the results obtained by the evaluation chamber was performed using visual evaluation and resolution charts for the images obtained, the availability of visual line of sight during the test, and the absence of GPS signal.</p><p><br></p><p>From the comparison and analysis conducted and based on satisfactory flight results as images obtained during flights, the evaluation chamber is concluded to be a repeatable and reliable tool to apply to any UAS prior to inspect bridges and other structures, and the author recommends to refrain from conducting an inspection if the UAS does not comply with the minimum requirements presented in this research work. Additionally, this research provided a clearer understanding of the general phenomenon presented when UAVs approach structures and attempts to fill the gap of knowledge regarding minimum requirements and criterion for the use of UAS technologies in inspection of structures.</p>

Σκοπός της παρούσας διπλωματικής εργασίας είναι η μελέτη και ο προσδιορισμός, θεωρητικός και πειραματικός, του συντελεστή Κ της Rician κατανομής σε ένα κανάλι στα 2.4 GHz. Η κατανομή Rice χρησιμοποιείται για την περιγραφή του πλάτους του λαμβανόμενου σήματος σε ένα κανάλι μετάδοσης με ισχυρή επίδραση οπτικής επαφής (Line-of-Sight) μεταξύ κεραίας πομπού και δέκτη. Ο συντελεστής Κ Rice εκφράζει τον λόγο της συνεισφοράς της ισχύος της απευθείας συνιστώσας του σήματος ως προς την συνολική λαμβανόμενη ισχύ λόγω φαινομένων διάχυσης. Χρησιμοποιείται για τον χαρακτηρισμό του καναλιού καθώς και τον υπολογισμό του BER (bit-error-ratio) και της πλέον σημαντικής παραμέτρου των τηλεπικοινωνιών SNR (Signal-to-Noise-Ratio), δηλαδή του λόγου σήματος προς θόρυβο. Στο 1ο κεφάλαιο αναλύονται και περιγράφονται μερικές από τις σημαντικότερες τεχνολογίες ασυρμάτων δικτύων, από την πρώτη στιγμή της εμφάνισής τους (δίκτυα 1ης και 2ης γενιάς) έως τα πιο σύγχρονα δίκτυα 3ης και 4ης γενιάς, και παρουσιάζονται οι ζώνες συχνοτήτων που καταλαμβάνουν αυτές οι τεχνολογίες στο διαθέσιμο ηλεκτρομαγνητικό φάσμα. Στο 2ο κεφάλαιο μελετώνται οι 3 βασικότεροι μηχανισμοί διάδοσης του ηλεκτρομαγνητικού κύματος μέσα σε ένα ασύρματο κανάλι (ανάκλαση, περίθλαση, σκέδαση), περιγράφονται οι τύποι των απωλειών που υφίσταται ένα σήμα κατά την μετάδοση του και τα φαινόμενα των διαλείψεων, που παρατηρούνται πολύ έντονα σε ένα κινητό και μεταβαλλόμενο περιβάλλον διάδοσης. Στο 3ο κεφάλαιο γίνεται περιγραφή του μοντέλου ηλεκτρομαγνητικής μετάδοσης κατά Rice, δηλαδή όταν η απευθείας συνιστώσα του σήματος είναι η ισχυρότερη διαδρομή που ακολουθεί το εκπεμπόμενο σήμα κατά την πορεία του μέχρι τον δέκτη (LoS). Αναλύεται η σημαντικότερη παράμετρος αυτού του τύπου μετάδοσης, δηλαδή ο συντελεστής Κ, και παρουσιάζονται διάφορες μέθοδοι προσδιορισμού του τόσο θεωρητικά όσο και πειραματικά. Στο 4ο κεφάλαιο παρουσιάζονται τα αποτελέσματα των πειραματικών μας μετρήσεων σε διάφορες τοπολογίες μετάδοσης με LoS για ένα δίκτυο Wi-Fi, δηλαδή για συχνότητα λειτουργίας στα 2.4 GHz. Για κάθε τοπολογία, περιγράφεται πλήρως το περιβάλλον μετάδοσης καθώς και ολόκληρη η διαδικασία εκπόνησης των μετρήσεων (μετρητικά όργανα, απαραίτητο λογισμικό, τυχόν προσεγγίσεις κτλ.). Τέλος, στο 5ο και τελευταίο κεφάλαιο, παρουσιάζεται μια μέθοδος υπολογισμού του συντελεστή Κ μέσω των μετρήσεων και με τη βοήθεια του μοντέλου ελευθέρου χώρου, που χρησιμοποιείται για τον υπολογισμό των συνολικών απωλειών διαδρομής του σήματος. Τα αποτελέσματα των υπολογισμών χρησιμοποιήθηκαν, με την βοήθεια του Matlab, για την κατασκευή της CDF των τιμών του Κ αλλά και της γραφικής παράστασης της μεταβολής του Κ συναρτήσει της απόστασης. Οι εμπειρικές CDF συγκριθήκαν και προσεγγιστήκαν με γνωστές θεωρητικές CDF, και η συνάρτηση της μεταβολής του Κ με την απόσταση προσεγγίστηκε με όρους Goodness of Fit με την βοήθεια της γενικής μορφής γνωστών συναρτήσεων. Κλείνοντας, στην τελευταία παράγραφο της εργασίας αφήνεται περιθώριο και δίνεται τροφή για μελλοντική εργασία πάνω στην μελέτη και τον προσδιορισμό του συντελεστή Κ της Rice τόσο για εσωτερικούς όσο και για εξωτερικούς χώρους. / The main purpose of this thesis, is the analysis and estimation , theoretical and empirical, of the Rician K factor for a wireless channel at 2.4 GHz. The Rician power density function is used to describe the amplitude of the received signal when there is a strong LOS component. The Rician K factor expresses the ratio of the power component due to LOS signal propagation and the received signal power due to diffuse components (reflection, scattering, diffraction etc.). It is commonly used for the channel's characterization and the estimation of BER (bit error rate) and SNR (signal to noise ratio), a very important parameter for telecommunications. In the 1st chapter, some of the most important wireless systems are described, since their very first appearance (1G & 2G networks) until the latest 3rd and 4rth generation systems. We also present the current frequency bands and how they are spread at the given electromagnetic spectrum. In the 2nd chapter, the 3 basic propagation mechanisms (reflection, scattering, diffraction) are studied. In addition, we describe all types of signal attenuation within a wireless channel and the fading phenomena that are so commonly seen in mobile and continuously changing propagation environments. In the 3rd chapter, the Rician model of electromagnetic propagation, where LOS is the strongest path of signal components, is analyzed. The most important parameter of this propagation type, the Rician K factor, is also studied. Therefore, various methods of theoretical and empirical estimation of the K factor are presented. In the 4rth chapter, we include the results of our measurements in various LOS propagation topologies for a Wi-Fi system at 2.4 GHz. For each measurement topology, the propagation environment as well as the entire measurement procedure, are thoroughly described. Lastly, in the 5th and final chapter, a K factor estimation method based on the empirical set of data and the Free Space Model, used for the average path loss calculation, is presented. The results of our measurements via the help of the Matlab software were used in order to plot the CDF of K values as well as the K values versus d (distance) curve. Using curve fitting methods, the empirical CDFs and plots were compared to theoretical ones in terms of Goodness of Fit. In the closing section, possible future research in the aforementioned fields is proposed.

The main theme of this master thesis is the design of technological process measurement and processing of measured data entered crane tracks to determine the geometric parameters of these crane tracks. Diploma thesis further describes the procedure for testing and possible rectification surveying equipment and instrumentation. The thesis is divided of 7 parts, contains 31 images, 4 graphs, 44 tables and 13 attachments. The theoretical part of this thesis contains information about several types of cranes, methods of measurement and processing, as well information on legal and technical regulations related to this topic of the thesis. The fourth and fifth parts of this thesis provides information on selected crane tracks on which the measurements were taken, the choice of methods of measurement, processing technique and the results obtained. The final part of the thesis includes evaluation of the results obtained, comparing methods of measurement, processing, evaluation and design of a technique of determining the geometric parameters of crane tracks.

No description available.