L’objet de ce travail de thèse consiste à utiliser un formalisme vibratoire pour la détermination de contraintes dans les dépôts à l’aide de la méthode dynamique résonante. Ceci a nécessité le développement d’un formalisme vibratoire adapté aux massifs revêtus, en reliant le niveau de contrainte à la variation des fréquences de résonance mesurées. L’étude a été effectuée en menant trois approches en parallèle : numérique, analytique et expérimentale. En premier lieu, nous avons réalisé des simulations numériques par éléments finis, afin de déterminer la distribution de contraintes dans l’épaisseur d’une poutre composite contrainte et d’évaluer l’effet de ces profils de contraintes sur la fréquence de résonance. Les résultats numériques ont permis d’optimiser le développement d’un nouveau formalisme vibratoire analytique. Pour valider ce dernier formalisme, il nous a fallu l’appliquer sur des dépôts réels,en confrontation avec les résultats d’autres méthodes de mesures de contraintes (DRX/Stoney). Cette confrontation numérique-analytique/expérimentale a révélé que la méthode dynamique résonante est pertinente pour des systèmes de dépôts ayant des rapports d’épaisseur supérieur à0,01. / The aim of this work is to use a new vibratory formalism in order to determine the level of internal stresses in coated materials using the dynamic resonant method. This requires the improvement of vibratory formalism, which allows to link the stress level to the variation of resonance frequency in free flexural mode. This study was conducted by doing three different approaches: numerical, analytical and experimental measurements in real coating. Numerical simulations were conducted by finite element method in static mode to determine the stress distribution in depth. Furthermore, we made other numerical simulations in dynamic mode to evaluate the effect of these static results on the resonant frequency, in comparison with those of coated material without stress. At this stage, these numerical studies let us to develop the vibratory formalism analytically. To validate this latter formalism, we applied it in a real coating for measuring the stress level and we made comparisons with results from others methods(DRX/Stoney). This confrontation (numerical-analytical/experimental measurements) found that dynamic resonant method is efficient for coated material having a thickness ratio moreimportant than 0,01.

For evaluation and quality control of concrete structures, the impact resonant frequency method is widely accepted for monitoring structure in-service properties and detecting structural damage. Common defects in concrete include consolidation problems during casting and development of micro-cracks during stages of hydration. Monitoring the dynamic characteristics of concrete plays an essential role in detecting real-time and early stages of deterioration. Ample research is focused on detecting large defects, however not much information is available on detection of minor defects of composites like fiber reinforced concrete. Change of elastic behavior when Polypropylene fibers are added as reinforcement is investigated. Destructive tests on structures in-service are not always feasible thus leaving non-destructive condition assessment as the only option. Amongst the various non-destructive tests available, vibrational tests provide a practical method to predict the dynamic moduli of structures (dynamic modulus of elasticity, dynamic modulus of rigidity and dynamic Poisson’s ratio). The objective of this research is to assess the dynamic elastic properties of Polypropylene Fiber Reinforced Concrete (PFRC) in correlation with induced cracks and common consolidation defects using a lab developed non-destructive testing method that relies on impulse excitation and stress wave propagation to measure changes in the resonant frequency when polypropylene fibers are added to concrete. In the experimental program, two fiber sizes, macro and micro, with various volume contents have been used for casting PFRC cylinders and prisms. Fundamental resonant frequencies were measured for all cylinders and prisms in the transverse and longitudinal directions. All measured frequencies are directly related to the low-strain dynamic modulus of elasticity. In addition, PFRC prisms were used to investigate the relationship between the dynamic modulus of elasticity and modulus of rigidity. Several batches of similar mixtures are used to investigate different parameters that affect the resonant frequency of concrete such as the water to cement ratio, curing condition and age. Results indicated a decrease in the resonant frequency and elastic properties with an increase of the fiber content or length. Micro fibers showed higher dynamic elastic moduli when compared to macro fibers of the same mixture under saturated curing conditions. Post-cracked PFRC cylinders and flexural fractured prisms retained some of the resonant frequency with macro fibers exhibiting better elastic recovery when cracked. / Graduate

Terahertz (THz) devices are designed to operate from 0.1-10 THz. The THz spectra have unique properties such as penetration through soft materials and reflecting from hard materials, which make THz technologies, a prime candidate for imaging. Plasmons are longitudinal charge oscillations in carrier rich materials. Plasmons can be generated over the channel of transistors inducing a voltage between the source-drain when conditions are satisfied. In this thesis, plasmonic devices operating in the THz region have been studied both theoretically and experimentally investigating GaN/AlGaN and Graphene based transistors. First, we report on a detailed study of dispersion properties of uniform grating gate THz plasmonic crystals, asymmetric dual grating gate plasmonic crystals and with symmetry-breaking defect-like cavities in order to understand the physics behind THz plasmons. For the first time, we defined the dispersion of plasmons in terms of effective plasmonic index. By adding an additional grating on top of the grating gate with a different periodicity, doubles the amount of absorption. Plasmons can be excited when polarization is perpendicular to the gate. We then showed focusing and exciting of THz plasmons polarization independent using circular grating lenses. Sub-micron THz ring resonators are presented showing THz guiding in plasmonic waveguides. So far, resonant sensing has been observed only at cryogenic temperatures since electron mobility is high enough at low temperatures to sustain resonant plasmonic excitation at the channel of the detector. Recently, graphene attracted the attention of the researchers because of its high mobility at room temperature. Room temperature detection has been attempted and achieved, however the detectors have very small responsivity with non-resonant behavior since the graphene is sandwiched and fabrication of such detectors in large scale is impossible with the methods used. Here, we present a resonant room temperature detection of THz with upside down free standing graphene FETs having more than a 400 quality factor, a record high number in the field which is up to 50 times higher than GaN detectors and hundreds of responsivity values with a maximum around 400 V/W which is record high for graphene (10,000 times higher than previously reported graphene detector).

The resonant tunneling diode (RTD) is the fastest electron device to-date in terms of its ability to generate continuous-wave terahertz frequency at room temperature, owing to its unique characteristic of negative differential resistance (NDR). In this work, a lattice-matched In0.53Ga0.47As (on InP) is used as the cladding layer, while a highly-compressive strained In0.8Ga0.2As is sandwiched between two tensile-strained pseudomorphic AlAs barriers to form the active double barrier quantum well RTD structure grown by Molecular Beam Epitaxy. The ultimate aim of this work was to integrate an optimised RTD into an oscillator circuit to enable a 100 GHz (W-band) MMIC RTD oscillator. One of the key challenges in this work was to improve the DC performance of the RTD, through extensive material and structural characterisations. Growing nano-scale epitaxial layers require a high degree of controllability with mono-layer precision. The dependencies of the NDR components, such as the peak current density, peak voltage and peak-to-valley current ratio (PVCR) towards variations in structural thickness were studied systematically. Through this work, it is found that the peak current density is strongly affected by monolayer variation in barrier thickness. The effect of quantum well thickness variation towards peak current density is relatively weaker. Interestingly, variation in spacer layer thickness has very little influence towards the magnitude of the peak current density. The fabrication of the RTD using a conventional i-line optical lithography created its own challenge. The process capability to reduce mesa active area down to sub-micrometer level to reduce device’s geometrical capacitance for high frequency, THz applications has been made feasible in this work. The conventional i-line optical lithography was combined with a newly developed tri-layer soft reflow technique using solvent vapour resulted in sub-micrometer RTDs. The DC characterisation of the fabricated RTDs showed excellent device scalability, indicating a robust processing. This novel sub-micron processing technique with high throughput and repeatability is a very promising low cost technique. A collaborative effort between the University of Manchester and Glasgow paved the way towards the realisation of an integrated W-band RTD MMIC oscillator. The circuit-combining topology was designed by the High Frequency Electronics Group in Glasgow while the mask-layout and oscillator fabrication took place in Manchester. An active RTD from sample XMBE#301 with peak current density of 1.4 x 105 A/cm2 and PVCR of 4.5 was integrated into a 100 GHz MMIC oscillator to successfully produce a measured frequency of 109 GHz with an un-optimised 5.5 μW output power at room temperature (mesa area = 4x4 μm2).

I developed a high power blue laser for use in scientific and technical applications (eg. precision spectroscopy, semiconductor inspection, flow cytometry, etc). It is linearly polarized, single longitudinal and single transverse mode, and a convenient fiber coupled continuous wave (cw) laser source. My technique employs external cavity frequency doubling and provides better power and beam quality than commercially available blue diode lasers. I use a fiber Bragg grating (FBG) stabilized infrared (IR) semiconductor laser source with a polarization maintaining (PM) fiber coupled output. Using a custom made optical and mechanical design this output is coupled with a mode matching efficiency of 96% into the doubling cavity. With this carefully designed and optimized cavity, measurements were carried out at various fundamental input powers. A net efficie ncy of 81 % with an output power of 680 mW at 486 nm was obtained using 840 mW of IR input. Also I report an 87.5 % net efficiency in coupling of blue light from servo locked cavity into a single mode PM fiber. Thus I have demonstrated a total fiber to fiber efficiency of 71% can be achieved in our approach using periodically poled potassium titanyl phosphate (PPKTP). To obtain these results, all losses in the system were carefully studied and minimized.

京都大学 / 0048 / 新制・論文博士 / 博士(工学) / 乙第13010号 / 論工博第4135号 / 新制||工||1649(附属図書館) / 32938 / 京都大学大学院工学研究科都市環境工学専攻 / (主査)教授 髙橋 大弐, 教授 鉾井 修一, 教授 竹脇 出 / 学位規則第4条第2項該当 / Doctor of Philosophy (Engineering) / Kyoto University / DGAM

京都大学 / 0048 / 新制・課程博士 / 博士(理学) / 甲第20901号 / 理博第4353号 / 新制||理||1625(附属図書館) / 京都大学大学院理学研究科物理学・宇宙物理学専攻 / (主査)教授 川合 光, 教授 青木 慎也, 准教授 菅沼 秀夫 / 学位規則第4条第1項該当 / Doctor of Science / Kyoto University / DGAM

In this thesis, four different numerical techniques are implemented for the purpose of simulating resonant tunnelling diodes (RTDs). The chosen methods were: piecewise constant transfer matrix (TMM-C), piecewise linear transfer matrix (TMM-L), quantum transmitting boundary method (QTBM), and the Crank-Nicolson method (CN). The numerical methods converged compared with the known analytic simulation for plane waves tunnelling through a single barrier. To better represent the semiconductor-based RTDs, the effective mass approximation was adopted with accompanying modifications to the Hamiltonian operators to ensure the continuity of the wave function and its derivative. Using the Tsu-Esaki formula, the current density was calculated as a function of bias voltage for two different RTD devices. The numerically obtained current density was of the same order of magnitude as referenced experimental values but differed significantly enough to require better models if engineering applications are decided. The models in this thesis were able to display resonant tunnelling and a negative differential resistance (NDR), giving them plausible educational value.

Guided mode resonant (GMR) structures are optical devices that consist of a planar waveguide with a periodic structure either imbedded in or on the surface of the structure. The resonance anomaly in GMR structures has many applications as dielectric mirrors, tunable devices, sensors,and narrow spectral band reflection filters. A desirable response from a resonant grating filter normally includes a nearly 100% narrowband resonant spectral reflection (transmission), and a broad angular acceptance at either normal incidence or an oblique angle of incidence. This dissertation is a detailed study of the unique nature of the resonance anomaly in GMR structures with two-dimensional (2-D) periodic perturbation. Clear understanding of the resonance phenomenon is developed and novel 2-D GMR structures are proposed to significantly improve the performance of narrow spectral filters. In 2-D grating diffraction, each diffracted order inherently propagates in its distinct diffraction plane. This allows for coupled polarization dependent resonant leaky modes with one in each diffraction plane. The nature of the interaction between these non-collinear guides and its impact on spectral and angular response of GMR devices is investigated and quantified for 2-D structures with rectangular and hexagonal grids. Based on the developed understanding of the underlying phenomenon, novel GMR devices are proposed and analyzed. A novel controllable multi-line guided mode resonant (GMR) filter is proposed. The separation of spectral wavelength resonances supported by a two-dimensional GMR structure can be coarse or fine depending on the physical dimensions of the structure and not the material properties. Multiple resonances are produced by weakly guided modes individually propagating along multiple planes of diffraction. Controllable two-line and three-line narrow-band reflection filter designs with spectral separation from a few up to hundreds of nanometers are exhibited using rectangular-lattice and hexagonal-lattice grating GMR structures, respectively. Broadening of the angular response of narrow band two-dimension guided mode resonant spectral filters, while maintaining a narrow spectral response, is investigated. The angular response is broadened by coupling the diffracted orders into multiple fundamental guided resonant modes. These guided modes have the same propagation constant but propagating in different planes inherent in multiple planes of diffraction of the 2-D gratings. The propagation constants of the guided resonant modes are determined from the physical dimensions of the grating (periodicity and duty cycle) and the incident direction. A five-fold improvement in the angular tolerance is achieved using a grating with strong second Bragg diffraction in order to produce a crossed diffraction. A novel dual grating structure with a second grating located on the substrate side is proposed to further broaden the angular tolerance of the spectral filter without degrading its spectral response. This strong second Bragg backward diffraction from the substrate grating causes two successive resonant bands to merge producing a resonance with symmetric broad angular response.

The realization of wavelength scale and sub-wavelength scale fabrication of integrated optical devices has led to a concurrent need for computational design tools that can accurately model electromagnetic phenomena on these length scales. This dissertation describes the physical, analytical, numerical, and software developments utilized for practical implementation of two particular frequency domain design tools: the modal method for multilayer waveguides and one-dimensional lamellar gratings and the Rigorous Coupled Wave Analysis (RCWA) for 1D, 2D, and 3D periodic optical structures and integrated optical devices. These design tools, including some novel numerical and programming extensions developed during the course of this work, were then applied to investigate the design of a few unique integrated waveguide and grating structures and the associated physical phenomena exploited by those structures. The properties and design of a multilayer, multimode waveguide-grating, guided mode resonance (GMR) filter are investigated. The multilayer, multimode GMR filters studied consist of alternating high and low refractive index layers of various thicknesses with a binary grating etched into the top layer. The separation of spectral wavelength resonances supported by a multimode GMR structure with fixed grating parameters is shown to be controllable from coarse to fine through the use of tightly controlled, but realizable, choices for multiple layer thicknesses in a two material waveguide; effectively performing the simultaneous engineering of the wavelength dispersion for multiple waveguide grating modes. This idea of simultaneous dispersion band tailoring is then used to design a multilayer, multimode GMR filter that possesses broadened angular acceptance for multiple wavelengths incident at a single angle of incidence. The effect of a steady-state linear loss or gain on the wavelength response of a GMR filter is studied. A linear loss added to the primary guiding layer of a GMR filter is shown to produce enhanced resonant absorption of light by the GMR structure. Similarly, linear gain added to the guiding layer is shown to produce enhanced resonant reflection and transmission from a GMR structure with decreased spectral line width. A combination of 2D and 3D modeling is utilized to investigate the properties of an embedded waveguide grating structure used in filtering/reflecting an incident guided mode. For the embedded waveguide grating, 2D modeling suggests the possibility of using low index periodic inclusions to create an embedded grating resonant filter, but the results of 3D RCWA modeling suggest that transverse low index periodic inclusions produce a resonant lossy cavity as opposed to a resonant reflecting mirror. A novel concept for an all-dielectric unidirectional dual grating output coupler is proposed and rigorously analyzed. A multilayer, single-mode, high and graded-index, slab waveguide is placed atop a slightly lower index substrate. The properties of the individual gratings etched into the waveguide's cover/air and substrate/air interfaces are then chosen such that no propagating diffracted orders are present in the device superstrate and only a single order is present outside the structure in the substrate. The concept produces a robust output coupler that requires neither phase-matching of the two gratings nor any resonances in the structure, and is very tolerant to potential errors in fabrication. Up to 96% coupling efficiency from the substrate-side grating is obtained over a wide range of grating properties.