<p>In this study the formation of supported membranes onto planar solid supports has been investigated. The stability and activity of reconstituted membrane receptors has been studied. The potential use of such preparations in biosensor applications is discussed.</p><p>The lipid films were made by the Langmuir Blodgett and by the liposome fusion techniques. These supported films were characterised by ellipsometry, atomic force microscopy, surface plasmon resonance (SPR) and resonant mirror techniques. The thickness of the films was in agreement with that of a cell membrane. The kinetics of formation of the lipid films was studied and discussed.</p><p>The proteins, bacteriorhodopsin, cytochrome oxidase, acetylcholinesterase and the nicotinic acetylcholine receptor were reconstituted into the supported membrane. The subsequent analysis showed that the proteins were individually distributed and that the activity was retained, in some cases for several weeks after immobilisation.</p><p>The glycolipids, GM1, GM2, GD1b, asialo-GM1, globotriaosylceramide, lactosylceramide and galactosylceramide, were also reconstituted into the supported membranes. Their specific interaction with the toxin ricin or with its B-chain was examined using SPR. The affinity of intact toxin and of its B-chain differed markedly and was pH dependent. The carbohydrate chain length and charge density of the glycolipids also influenced the affinity.</p>

<p>This thesis addresses the electronic structure of vanadium and copper oxides using soft X-ray absorption (SXA) spectroscopy and resonant inelastic X-ray scattering (RIXS) at high brightness synchrotron radiation sources. In RIXS incident photons, tuned to the energy of specific absorption resonances, are inelastically scattered leaving behind a low energy valence excitation in the system studied. Effects of electron localization are reflected by the occurrence of low-energy excitations in form of dd- and charge-transfer excitations that are modelled by cluster calculations. Band-like states are dominating when the intermediate core excited state is delocalized.</p><p>RIXS at V 2p and O 1s resonances has been used to study the electronic structure of the monovalent vanadium oxides VO₂ and V₂O₃, and of the mixed valence compounds, NaV₂O₅ and V₆O₁₃. For NaV₂O₅ and V₆O₁₃ significant contributions from localized low-energy excitations reflect the partly localized character of their valence band electronic structure, whereas VO₂ and V₂O₃ appear mostly as band-like. Effects of carrier doping are addressed for the case of Mo doping into VO₂ and reveal a quasi-rigid band behavior. In the cases of VO₂ and V₆O₁₃ the temperature dependent metal-insulator transition could be monitored by following the spectral evolution of bands originating from V 3d and V 3d - O2p hybridized states. For Na₂V₃O₇ nanotubes it was possible to selectively probe states from the apical and the basal oxygen sites of VO₅ pyramids that constitute these nanotubes. Furthermore, the RIXS technique has been demonstrated to be highly valuable in characterizing the charge transfer processes that accompany lithium insertion into vanadium oxide battery cathodes. Finally, for insulating cuprates RIXS at O 1s, Cu 3p and Cu 3s resonances has been recorded at high-resolution for the detailed investigation of crystal field excitations.</p>

<p>Lithium ion insertion into electrode materials is commonly used in rechargeable battery technology. The insertion implies changes in both the crystal structure and the electronic structure of the electrode material. Side-reactions may occur on the surface of the electrode, which is exposed to the electrolyte and form a solid electrolyte interface (SEI). The understanding of these processes is of great importance for improving battery performance. The chemical and physical properties of water and alcohols are complicated by the presence of strong hydrogen bonding. Various experimental techniques have been used to study geometrical structures and different models have been proposed to view the details of how these liquids are geometrically organized by hydrogen bonding. However, very little is known about the electronic structure of these liquids, mainly due to the lack of suitable experimental tools.</p><p>This thesis addresses the electronic structure of liquids and lithium battery materials using resonant inelastic X-ray scattering (RIXS) at high brightness synchrotron radiation sources. The electronic structure of battery electrodes has been probed, before and after lithiation, studying the doping of electrons into the host material. The chemical composition of the SEI on cycled graphite electrodes was determined. The local electronic structure of water, methanol and mixtures of the two have been examined using a special liquid cell. Results from the study of liquid water showed a strong influence on the 3a₁ molecular orbital and orbital mixing between molecules upon hydrogen bonding. The study of methanol showed the existence of ring and chain formations in the liquid phase and the dominating structures are formed of 6 and 8 molecules. Upon mixing of the two liquids, a segregation at the molecular level was found and the formation of new structures, which could explain the unexpected low increase of the entropy.</p>

In this thesis I have performed theoretical studies on the reaction dynamics in few-atom molecules. In particular, I have looked at reaction processes in which highly excited resonant states are involved. When highly excited states are formed, the dynamics becomes complicated and approximations normally used in chemical reaction studies are no longer applicable.To calculate the potential energy curve for some of these states as a function of internuclear distance, a combination of structure calculations and scattering calculations have to be performed, and the reaction dynamics on the potentials has been studied using both time-independent and time-dependent methods.The processes that have been studied and which are discussed in this thesis are ion-pair formation in electron recombination with H3+, dissociative recombination and ion-pair formation of HF+, mutual neutralization in H++F- collisions and dissociative recombination of BeH+. Isotope effects in these reactions have also been investigated. Our calculated cross sections are compared with experimentally measured cross sections for these reactions.

This thesis addresses the electronic structure of vanadium and copper oxides using soft X-ray absorption (SXA) spectroscopy and resonant inelastic X-ray scattering (RIXS) at high brightness synchrotron radiation sources. In RIXS incident photons, tuned to the energy of specific absorption resonances, are inelastically scattered leaving behind a low energy valence excitation in the system studied. Effects of electron localization are reflected by the occurrence of low-energy excitations in form of dd- and charge-transfer excitations that are modelled by cluster calculations. Band-like states are dominating when the intermediate core excited state is delocalized. RIXS at V 2p and O 1s resonances has been used to study the electronic structure of the monovalent vanadium oxides VO2 and V2O3, and of the mixed valence compounds, NaV2O5 and V6O13. For NaV2O5 and V6O13 significant contributions from localized low-energy excitations reflect the partly localized character of their valence band electronic structure, whereas VO2 and V2O3 appear mostly as band-like. Effects of carrier doping are addressed for the case of Mo doping into VO2 and reveal a quasi-rigid band behavior. In the cases of VO2 and V6O13 the temperature dependent metal-insulator transition could be monitored by following the spectral evolution of bands originating from V 3d and V 3d - O2p hybridized states. For Na2V3O7 nanotubes it was possible to selectively probe states from the apical and the basal oxygen sites of VO5 pyramids that constitute these nanotubes. Furthermore, the RIXS technique has been demonstrated to be highly valuable in characterizing the charge transfer processes that accompany lithium insertion into vanadium oxide battery cathodes. Finally, for insulating cuprates RIXS at O 1s, Cu 3p and Cu 3s resonances has been recorded at high-resolution for the detailed investigation of crystal field excitations.

The present thesis concerns aspects of the interaction ofmatter in gas, liquid and solid phases, with electromagneticradiation, ranging from the optical to the X-ray region. Overthe last decade the availability of ultrashort strong laserpulses as well as of high power synchrotron sources of tunableX-ray radiation has stimulated a rapid development of newexperimental techniques which makes it possible to analysedifferent physical, chemical and biological processes inunprecedented detail. All of this urges a concomitantdevelopment of adequate theoretical language and methodscombined with simulation techniques. The first part of the thesis addresses nonlinear propagationof strong optical pulses. This study is motivated by thebreakthrough in synthesis of novel organic materials possessingprespecified nonlinear optical properties and which has led toa multitude of potential applications such as, for example, 3Dimaging and data storage, optical limiting and photodynamiccancer therapy. In order to clarify the underlying physics, astrict solution has been derived of the density matrixequations of a material aiming at an explicit treatment of itsnonlinear polarization without addressing a conventional Taylorexpansion over field amplitudes. Such a formalism is developedfor many-level molecules, allowing to solve the coupledMaxwell's and density matrix equations for the propagation of afew interacting laser pulses through a nonlinear molecularmedium. The theory presented is capable to account formulti-photon processes of an arbitrary order and for differentsaturation effects. The theory is applied to simulations oftwo- and three-photon absorption as well as to upconvertedstimulated emission of organic molecules in solvents. The second part of the thesis is devoted to resonant X-rayRaman scattering from free molecules, solutions and polymerfilms. The temporal analysis of the spectral profiles isperformed using the technique of scattering duration whichallows to select physical processes with different time scales.The slowing-down/speeding-up of the scattering by frequencydetuning provides insight in the formation of the differentparts of the scattering profile like atomic and molecularbands, resonant and vertical scattering channels, anomalousenhancement of the Stokes doubling effect. The lifetimevibrational interference (LVI), playing a crucial role inresonant scattering, is found to strongly influence thedispersion of the Auger resonances of polymers in agreementwith experiment. An almost complete quenching of the scatteringcross section by LVI is observed for the N2molecule. It is found that the interferenceelimination of the scattering amplitude gives valuableinformation on molecular geometry. The electron Doppler effectis minutely studied making use of a wave packet technique. Thesimulations show an "interference burning" of a narrow hole onthe top of the Doppler broadened profile of the Auger spectraof molecular oxygen. For the SF6molecule the Auger Doppler effect is found to besensitive to the detuning due to the scattering anisotropy. Inall of these studies the temporal language was foundconstructive and enormously helpful for understanding theunderlying physical processes. Most theoretical predictionsmade have been verified by experiments.

In this study the formation of supported membranes onto planar solid supports has been investigated. The stability and activity of reconstituted membrane receptors has been studied. The potential use of such preparations in biosensor applications is discussed. The lipid films were made by the Langmuir Blodgett and by the liposome fusion techniques. These supported films were characterised by ellipsometry, atomic force microscopy, surface plasmon resonance (SPR) and resonant mirror techniques. The thickness of the films was in agreement with that of a cell membrane. The kinetics of formation of the lipid films was studied and discussed. The proteins, bacteriorhodopsin, cytochrome oxidase, acetylcholinesterase and the nicotinic acetylcholine receptor were reconstituted into the supported membrane. The subsequent analysis showed that the proteins were individually distributed and that the activity was retained, in some cases for several weeks after immobilisation. The glycolipids, GM1, GM2, GD1b, asialo-GM1, globotriaosylceramide, lactosylceramide and galactosylceramide, were also reconstituted into the supported membranes. Their specific interaction with the toxin ricin or with its B-chain was examined using SPR. The affinity of intact toxin and of its B-chain differed markedly and was pH dependent. The carbohydrate chain length and charge density of the glycolipids also influenced the affinity.

Lithium ion insertion into electrode materials is commonly used in rechargeable battery technology. The insertion implies changes in both the crystal structure and the electronic structure of the electrode material. Side-reactions may occur on the surface of the electrode, which is exposed to the electrolyte and form a solid electrolyte interface (SEI). The understanding of these processes is of great importance for improving battery performance. The chemical and physical properties of water and alcohols are complicated by the presence of strong hydrogen bonding. Various experimental techniques have been used to study geometrical structures and different models have been proposed to view the details of how these liquids are geometrically organized by hydrogen bonding. However, very little is known about the electronic structure of these liquids, mainly due to the lack of suitable experimental tools. This thesis addresses the electronic structure of liquids and lithium battery materials using resonant inelastic X-ray scattering (RIXS) at high brightness synchrotron radiation sources. The electronic structure of battery electrodes has been probed, before and after lithiation, studying the doping of electrons into the host material. The chemical composition of the SEI on cycled graphite electrodes was determined. The local electronic structure of water, methanol and mixtures of the two have been examined using a special liquid cell. Results from the study of liquid water showed a strong influence on the 3a1 molecular orbital and orbital mixing between molecules upon hydrogen bonding. The study of methanol showed the existence of ring and chain formations in the liquid phase and the dominating structures are formed of 6 and 8 molecules. Upon mixing of the two liquids, a segregation at the molecular level was found and the formation of new structures, which could explain the unexpected low increase of the entropy.

An innovative approach for characterization of one dimensional Photonic Band Gap structures comprised of metallic inclusions (i.e. subwavelength dipole elements or resonant ring elements) is presented. Through an efficient S- to T-parameters conversion technique, a detailed analysis has been performed to investigate the variation of the dispersion characteristics of 1-D PBG structures as a function of the cell element configuration. Also, for the first time, the angular sensitivity of the structure has been studied in order to obtain the projected band diagrams for both TE and TM polarizations. Polarization sensitivity of the subwavelength cell element is exploited to propose a novel combination of elements which allows achieving PBGs with simultaneous frequency and polarization selectivity. The proposed approach demonstrates that the dispersion characteristic of each orthogonal polarization can be independently adjusted with dipole elements parallel to that same polarization. Generally, the structure has potential applications in orthomode transducer, and generally whenever the polarization of the incoming signal is to be used as a means of separating it from another signal in the same frequency band that is of orthogonal polarization. The current distribution and the resonance behavior of the ring element is studied and the effect of resonance on dispersion characteristics of 1-D PBGs composed of rings is investigated for the first time, for both individual and coupled rings. Interestingly, it is observed that 1-D PBG composed of resonant elements consistently has a bandgap around the resonant frequency of the single layer structure.

An electrostatic actuator driven by conventional voltage control and charge control requires high actuation voltage and suffers from the pull-in phenomenon that limits its operation range, much less than its entire gap. To provide effective solutions to these problems, we present complete analytical and numerical models of various electrostatic actuators coupled with resonant drive circuits that are able to drive electrostatic actuators at much lower input voltage than that of conventional actuation methods and to extend their operation range beyond their conventional pull-in points in the presence of high parasitic capacitance. Moreover, in order to validate the analytical and numerical models of various electrostatic actuators coupled with the resonant drive circuits, we perform the experiment on the microplate and the micromirror coupled with the resonant drive circuit. For instance, using a high voltage amplifier, we manage to rotate the micromirror with sidewall electrodes by 6 ° at 180 V. However, using the resonant drive circuit, we are able to rotate the same micromirror by 6 ° at much lower input voltage, 8.5 V. In addition, the presented work also facilitates the stability analysis of electrostatic actuators coupled with the resonant drive circuits and provides how the effect of the parasitic capacitance can be minimized. For example, the resonant drive circuit placed within a positive feedback loop of a variable gain amplifier is able to extend the operation range much further even in the presence of very high parasitic capacitance. The resonant drive circuit with the proposed feedback controllers is also able to minimize the detrimental effects of the parasitic capacitance and to displace a parallel-plate actuator over its entire gap without the saddle-node bifurcation. Finally, we present a new displacement measurement method of electrostatic actuators coupled with the resonant drive circuits by sensing the phase delay of an actuation voltage with respect to an input voltage. This new measurement method allows us to easily implement feedback control into existent systems employing an electrostatic actuator without any modification or alteration to the electrostatic actuator itself. Hence, this research work presents the feasibility of electrostatic actuators coupled with the resonant drive circuit in various industrial and medical applications, in which the advantages of miniaturization, low supply voltage, and low power consumption are greatly appreciated.