Value-added tax (VAT) was introduced in South Africa in 1991 by the Value-Added Tax Act (89 of 1991) (the VAT Act). The South African VAT system is a destination-based, consumption-type VAT and is levied on goods or services consumed in South Africa. The definition of enterprise is an important definition in the VAT Act and it sets out the persons, activities and supplies that are to be included in the VAT base. It is compulsory for a person that conducts an enterprise in South Africa to register for VAT if the threshold set for taxable supplies is exceeded. There are interpretational problems and uncertainties in respect of the definition of “enterprise” and when an enterprise is conducted in South Africa or partly in South Africa. The purpose of this research study was to interpret the term enterprise for South African VAT purposes, to identify interpretational challenges and uncertainties and to suggest what must be addressed through guidance and interpretation by the South African Revenue Service (SARS) to provide more clarity. The research methodology followed to achieve the set objectives was normative research which is a form of legal research, specifically doctrinal. The requirements in terms of the VAT Act for levying of VAT, registration for VAT and the conducting of an enterprise in South Africa were explored and interpretational challenges and uncertainties were identified. The requirements for levying of and registration for VAT/ GST, in New Zealand, in terms of information supplied by the EU and guidance supplied in respect thereof by the OECD were analysed and discussed. The information obtained was used to establish how the interpretational problems and uncertainties that were identified are dealt with in New Zealand and in terms of the information and guidance from the EU and the OECD. The interpretational challenges and uncertainties identified include the reference in the definition of enterprise in Section 1(1) of the VAT Act to activities that must be conducted continuously or regularly in South Africa or partly in South Africa. Uncertainty as to the interpretation of the term “utilised or consumed in the Republic” also exists. Guidance in respect of these interpretational problems and uncertainties is necessary to enable suppliers and consumers to determine with certainty if a person is obliged to register for and levy VAT on supplies made in South Africa. / MCom (South African and International Tax) ,North-West University, Potchefstroom Campus, 2015

Corporate Social Responsibility (“CSR”) as a business approach and corporate strategy has recently been added to the agenda of big and small businesses. The Johannesburg Stock Exchange Limited (“JSE”) requires of listed companies to disclose in their annual financial statements whether they have complied with King III (2009) or to explain as to why they have not. King III (2009) lays down the principle that a company is not only a profit making institution, but should also be a responsible citizen of the country. Companies are therefore moving toward becoming corporate citizens. Corporate citizenship is about integrating corporate responsibility into core business strategies, while at the same time adding value to shareholders and stakeholders. These corporate citizens are expending more and more money on their CSR objectives in the form of CSR expenditure. The purpose of this research study is to provide an analysis of the factors that influence the South African value-added tax (“VAT”) treatment of CSR expenditure. In general, the principles in the Warner Lambert (2003) case can be applied to such expenditure under the Value-Added Tax Act (89 of 1991) (“VAT Act”), in the sense that the expense being incurred for income tax purposes in the production of income will normally also be incurred “in the course or furtherance of an enterprise” for VAT purposes. The methodology used to meet the set objectives was that of legal interpretative research, specifically doctrinal. It was used to identify how the income tax and VAT legislation is applied on overhead expenditure, specifically CSR expenditure. The principles in the South African VAT legislation, specifically relating to the input tax deduction, were compared to the international VAT system to determine whether principles are similar and foreign judgements therefore reliable. A critical analysis was thereafter performed on South African and international case law, specifically European Court Judgements (“ECJ”) judgements, relating to the deductibility of input tax. The findings are that CSR expenditure may be seen as an overhead cost to a business and furthermore as a tool with which financial benefits can be created for a company if utilised correctly. It was determined that the factors that influence the South African VAT treatment of CSR expenditure were whether a supply made for no consideration, specifically CSR expenditure, was made in the course or furtherance of an enterprise and whether the CSR expenditure incurred could be proven to have a direct or immediate link to the making of taxable supplies in the course or furtherance of the vendor’s enterprise. / MCom (South African and International Taxation), North-West University, Potchefstroom Campus, 2014

The study aims to evaluate the understanding of value – based management (VBM) as a decision making tool, how it is embraced in all management levels and its impact on the performance of a petrochemical company. The application of VBM links business strategy, finance, performance management and management processes all together to create value. VBM is a powerful management framework with the aim to focus all managerial processes on shareholder value creation. It encourages employees at all levels within an organisation to focus on value creation. This study investigated VBM by means of literature study to formulate an understanding of how it can be used as a decision making tool in a petrochemical company. The VBM metrics were presented and some successes and failures of such metrics were considered to provide a better understanding of VBM implementation. A quantitative study was conducted through the use of a standardised questionnaire to collect primary data. The questionnaire was distributed to managers (from junior managers to senior managers) at Sasol. The completed questionnaire was tested for reliability and validity before it was analysed and specific constructs were developed from the literature review together with the respondents’ demographic profile. Even though most respondents indicated that they have not received adequate training and education on VBM, the results of the study indicate that there is a general knowledge and understanding of VBM and its principles in Sasol. After analysis the study provided practical recommendations to ensure that VBM is sustainably used as a decision making tool in a petrochemical company. / MBA, North-West University, Potchefstroom Campus, 2014

Law / LL.M.

Förädlingsvärdemodellen har enligt tidigare forskning möjlighet att redovisa företags hållbara ansvarstagande på ett systematiskt och reglerat sätt vilket gör arbetet med hållbarhet möjligt att revidera och jämföra. Studiens syfte är att empiriskt testa en modifierad förädlingsvärdemodell och analysera svenska börsföretags förädlingsvärde fördelat mellan fyra hållbarhetsdimensioner. Vidare är syftet att se om skillnader i fördelningen av förädlingsvärdet finns mellan företag i olika storlekar och branscher.   Studien har gjorts genom kvantitativ metod och deduktiv ansats. Som tillvägagångssätt har innehållsanalys av företagens årsredovisningar valts. För att bearbeta och presentera datan har genomsnittsvärden och tabeller tagits fram.   Studiens empiriska resultat visar att svenska börsföretags hållbara ansvarstagande skiljer sig åt beroende på företagsstorlek och bransch. Slutsatser som dras är bland annat att stora företag tar ett större hållbarhetsansvar än små och medelstora företag samt att branscherna teknologi, hälsovård och industri är de branscher som tar det största hållbara ansvarstagandet.   Studiens praktiska resultat är att förädlingsvärdemodellen empiriskt testats och visat sig kunna användas för att analysera företags hållbara ansvarstagande. Det teoretiska resultatet är att skillnader i hur svenska börsföretag fördelar sina förädlingsvärden kan förklaras genom intressentteorin, legitimitetsteorin och enterpriseteorin. Förslag till fortsatt forskning är att testa modellen på fler företag i Sverige och i andra länder samt att testa beroendet mellan fördelningen, storlek och bransch. / The value added statement is a model that makes the sustainable responsibility taken by companies able to audit and compare in a systematic and regulated way. This study aims to empirically test a modified value added statement and analyze the Swedish listed companies value added distributed between the four dimensions of sustainability. Furthermore, the purpose is to see whether there are differences in the distribution of value added between companies of different sizes and industries.   The study is conducted with quantitative method, a deductive approach and content analysis of annual reports. To process and present the data, the average values ​​and tables have been produced.   The results shows that the model can be used to measure the listed Swedish companies' sustainable responsibility. The results also shows differences between small and medium-sized enterprises and large companies, and between companies in different industries. Conclusions that are drawn are that large companies and the industries technology, healthcare and industry are taking the biggest sustainable responsibility.   Suggestions for future research is to test the model on other companies in Sweden and in other countries. Other suggestions is to test the relations between the variables. The study's contribution is that the value added statement is empirically tested and proved to be useful to see the companies’ sustainable responsibility. The study also shows that the model can be used to see differences between companies of different size and industry, which can be explained by the stakeholder, legitimacy and enterprise theory.

Abstract  Background:                     In an equity crowdfunding campaign, the investor receives shares in the company in return for the investment, which makes equity crowdfunding similar to traditional sources of equity funding. Nevertheless, skeptics have referred to equity crowdfunding as “dumb money”, since it might not provide similar non-financial value added as realized from professional investors. The main literature used for the frame of reference were Boué (2007), Macht and Robinson (2008) and Macht and Weatherston (2014). The literature worked as a basis for deriving a table, outlining the non-financial value added received by venture capitalists and business angels, as well as showing where literature is lacking regarding non-financial value added by equity crowdfunding investors. Purpose: The purpose of this thesis was to explore the non-financial value added by equity crowdfunding investors to the entrepreneur. This purpose was answered by two research questions: (1) Do equity crowdfunding investors provide similar non-financial value added to the entrepreneur as traditional equity funding investors do? (2) Are there any additional non-financial value added realized from equity crowdfunding? Method: This thesis follows the interpretivist research paradigm and undertakes an abductive research approach in order to explore the purpose. Primary data was collected through semi-structured interviews with seven entrepreneurs who had successfully conducted an equity crowdfunding campaign in Sweden. Secondary data was collected from peer-reviewed articles containing relevant theories and models. Conclusion: This research suggests that there are similarities between professional investors and equity crowdfunding investors in terms of non-financial value added. The contribution from equity crowdfunding investors seems to be dependent on the effort that the entrepreneur puts into the relationship with the investors. Furthermore, equity crowdfunding also allows the entrepreneur to maintain ownership and control over the company. However, each equity crowdfunding case is different and there are no guarantees of receiving certain types of investors.

Thesis (MComm)--University of Stellenbosch, 2005. / AFRIKAANSE OPSOMMING: Insetbelasting soos omskryf in artikel 1 van die Wet op Belasting op Toegevoegde Waarde No. 89 van 1991 (“die Wet”) kan teruggeëis word waar die goedere of dienste, ten opsigte waarvan die insetbelasting geëis word, vir die maak van belasbare lewerings verkry is. Waar goedere of dienste verkry word, gedeeltelik vir die maak van belasbare lewerings en gedeeltelik vir die maak van vrygestelde lewerings, moet ʼn toedeling van die insetbelasting ooreenkomstig die bepalings van Artikel 17(1) van die Wet gemaak word. Artikel 17(1) bepaal dat die omset-gebaseerde toedelingsmetode gebruik moet word vir die toedeling van toedeelbare insetbelasting. Hierdie metode wat voorgeskryf word gee aanleiding tot die volgende twee probleemstellings, naamlik : · Onduidelikheid in die Wet rakende die hantering van verskillende tipes lewerings binne die toedelingsformule, en · Onduidelikheid oor welke bedrae of gevalle by die toedelingsformule inof uitgesluit moet word. Artikel 17(1) bepaal ook dat, indien die omset-gebaseerde toedelings-metode nie toepaslik vir ʼn ondernemer is nie, ʼn alternatiewe metode gebruik kan word mits die alternatiewe metode ʼn redelike en regverdige alternatief daarstel. Hierdie uitsondering gee aanleiding tot ʼn derde probleemstelling, naamlik: · Wat kan as ʼn redelike en regverdige alternatief beskou word? Laastens maak Artikel 17(1) voorsiening vir ʼn voorbehoudsbepaling wat bekend staan as die de minimis-reël. Hiervolgens hoef ʼn ondernemer nie te voldoen aan Artikel 17(1) indien die ondernemer se totale belasbare lewerings minstens 95% van sy totale lewerings beloop nie. Die voorbehoudsbepaling maak egter nie voorsiening vir die hantering van abnormale omstandighede wat die implementering van die voorbehoudbepaling kan beïnvloed nie. Dit gee aanleiding tot die vierde probleemstelling, naamlik : · Watter maatreëls bestaan daar om te verseker dat die de minimis-reël nie deur abnormale omstandighede beïnvloed word nie? In hierdie studie word Artikel 17(1) krities ontleed ten einde te poog om oplossings vir bostaande probleemstellings te vind. Relevante wetgewing en publikasies van lande soos die Verenigde Koninkryk, Kanada, Australië en Ierland is ook bestudeer en na aanleiding hiervan kan die volgende afleidings gemaak word, naamlik: · dat ʼn lewering uit meer as een tipe lewering kan bestaan, hetsy belasbaar of vrygestel. Sodanige lewerings kan geklassifiseer word as toevallige-, saamgestelde- of gemengde lewerings wat, afhangend van die tipe lewering, die insetbelasting wat teruggeëis mag word, verskillend kan beïnvloed. Uitsluitsel oor die klassifikasies van lewerings moet verkry word alvorens dit in die toedelingsformule ingesluit word; · dat die in- of uitsluiting van spesifieke bedrae en gevalle in die toedelingsformule eerstens aan die hand van die ekonomiese aktiwiteitstoets gemeet moet word. Die resultate van ʼn ekonomiese aktiwiteitstoets sal aandui watter invloed ʼn spesifieke bedrag of geval op die toedelingsformule kan hê. Die spesifieke eienskappe van elke bedrag of geval moet daarna ontleed word om te bepaal of sodanige bedrag of geval by die toedelingsformule in- of uitgesluit moet word om die manipulasie van die toedelingsformule te voorkom; · dat riglyne bepaal moet word of die toepassing van ʼn alternatiewe toedelingsmetode redelik en regverdig is ten einde enige onsekerhede uit die weg te ruim. Dit behoort op ‘n soortgelyke wyse geïmplementeer te word as die bestaande riglyne in die wetgewing van lande soos Kanada, Ierland en die Verenigde Koninkryk; · dat die de minimis-reël uitgebrei moet word deur nie net na ʼn vaste persentasie te verwys nie, maar ook die gebruik van historiese syfers, randwaardes en maandelikse ontledings in te sluit, soos wat dit tans die gebruik in Kanada en die Verenigde Koninkryk is. Daar bestaan dus reeds in ander lande wetgewing wat die probleemareas, soos in die Suid-Afrikaanse wetgewing geïdentifiseer, aanspreek. Dit is dus nodig om aan die hand hiervan die Suid-Afrikaanse wetgewing uit te brei ten einde enige onduidelikhede en areas vir moontlike manipulasie uit te skakel / ENGLISH ABSTRACT: Input tax as defined in Section 1 of the Value Added Tax Act No. 89 of 1991 (“the Act”) can be deducted where goods or services are acquired by the vendor for the purpose of consumption, use or supply in the course of making taxable supplies. Where the goods or services are acquired by the vendor partially for the purpose of making taxable supplies and partially for the purpose of making exempt supplies, an apportionment of the input tax that can be deducted, has to be done in terms of Section 17(1) of the Act. Section 17(1) determines that the turnover-based apportionment method should be used for apportionment of the input tax. This prescribed method gives rise to the following problem statements: · The Act is not clear as to how different types of supplies should be treated in the apportionment formula, and · The Act is not clear as to which specific amounts or cases should be included or excluded from the apportionment formula. Section 17(1) further determines that, if a vendor finds the turnover-based method of apportionment inappropriate, the vendor can use an alternative method as long as the method is a fair and reasonable alternative. This exemption to the rule gives rise to a third problem statement, namely: · What should be seen as fair and reasonable alternative method? Finally, a proviso is found in Section 17(1), better known as the de minimisrule. According to the rule no apportionment is necessary in terms of Section 17(1) if the total taxable supplies constitute at least 95% of total supplies. The proviso does not take abnormal circumstances into account that can affect the implementation of the proviso. This gives rise to the fourth problem statement: · What controls exist to ensure that the de minimis-rule is not influenced by abnormal circumstances? In this study Section 17(1) is critically analyzed to find solutions for the above problem statements. Relevant acts and publications of countries such as the United Kingdom, Canada, Australia and Ireland were examined. The following conclusions can be drawn from the study: · A supply can consist out of more than one type of supply, either taxable or exempt. These supplies can be classified as coincidental supplies, combined supplies or mixed supplies. Each one of these supplies can have a material influence on the apportionment formula and should be considered carefully before they are included in the formula. · The inclusion or exclusion of any specific amount or case as part of the apportionment formula should first be measured against the economic activity test. The results of the economic activity test will indicate which effect the specific amount or case will have on the apportionment formula. Thereafter the distinctive characteristics of the amount or case should be analysed to ensure correct treatment of the specific amount or case in the apportionment formula to prevent the manipulation of the apportionment formula. · Guidelines should be identified to determine whether an alternative method of apportionment is fair and reasonable, in conjunction with the specific guidelines identified by the legislation of countries such as Canada, Ireland and the United Kingdom. · The de minimis-rule should be broadened not to only include the use of a fixed percentage, but also the use of historical figures, rand values and monthly analysis as is the case in Canada and the United Kingdom. As can be seen from the above there already exist legislation in other countries that addresses the problem areas as identified in South African legislation. It is therefore necessary to broaden the South African legislation to eliminate any uncertainties and areas for possible manipulation.

Thesis (MAcc)--Stellenbosch University, 2014. / ENGLISH ABSTRACT: In South Africa, value-added tax (‘VAT’) is classified as an indirect tax which is levied on goods or services supplied in the Republic of South Africa. In South Africa, VAT is a destination-based invoice type tax system which means that the consumption of goods and services are taxed. To register as a vendor for VAT purposes, the business conducted must fall within the ambit of an ‘enterprise’ as defined in section 1(1) of the Value-Added Tax Act, 1991 (Act No. 89 of 1991) (the VAT Act). Where a registered vendor makes taxable supplies of goods or services, it is subject to VAT at the standard rate in terms of section 7(1) of the VAT Act, unless and exemption or exception applies thereto. VAT incurred will constitute “input tax” as defined in section 1(1) of the VAT Act, where amongst others, the goods or services are acquired wholly for the purpose of consumption, use or supply in the course of making taxable supplies, or where the goods or services are acquired partly for such purpose, to such extent as determined in accordance with section 17(1) of the VAT Act. The vendor will therefore be confronted with various questions with regard to whether the activities are performed by the enterprise, or whether such activities fall outside the scope of VAT and therefore constitute non-enterprise activities. When the activities are regarded as enterprise activities, the vendor will have to determine whether the VAT incurred for the enterprise activities are used, consumed or supplied in making taxable supplies. Where the VAT incurred cannot be attributed to the making of taxable supplies, an apportionment of the VAT incurred is required. The apportionment method used in apportioning the VAT incurred for mixed purposes, must be fair and reasonable. This research assignment will therefore investigate and focus on the treatment of the VAT incurred by the business in deducting the correct amount of input tax. / AFRIKAANSE OPSOMMING: In Suid-Afrika word belasting op toegevoegde waarde (‘BTW’) geklassifiseer as ‘n indirekte belasting wat gehef word op die lewering van goed of dienste. BTW is ‘n destinasie-gebaseerde faktuurbasis wat beteken dat die verbruik van goed of dienste in Suid-Afrika aan belasting onderhewig is. Om vir BTW doeleindes te registreer, moet die besigheid of die bedryf aan die vereistes van ‘n ‘onderneming’ soos gedefineer in artikel 1(1) van die Belasting op Toegevoegde Waarde Wet (die BTW Wet) voldoen. ‘n Geregistreerde ondernemer wat goed of dienste lewer, moet BTW teen die standaardkoers ingevolge artikel 7(1) van die BTW Wet hef, tensy ‘n vrystelling of uitsondering op hierdie reël van toepassing is. Die belasting gehef ingevolge artikel 7(1) van die BTW Wet verteenwoordig insetbelasting indien die betrokke goed of dienste deur die ondernemer verkry word geheel en al met die doel van verbruik, gebruik of lewering in die loop van die doen vir belasbare lewerings. Indien die goed of dienste gedeeltelik vir daardie doel aangewend word, is die ondernemer verplig om die belasting toe te deel ingevolge artikel 17 van die BTW Wet. Die ondernemer word dus met verskeie vrae gekonfronteer om te bepaal of die goed of dienste aangewend word in die loop ter bevordering van die onderneming. Indien die goed of dienste nie vir daardie doel aangewend word nie, die sogenaamde ondernemingsaktiwiteite, sal die BTW aangegaan deur die ondernemer buite die bestek van die BTW Wet val en gevolglik as nie-ondernemingsaktiwitiete geklassifiseer word. Indien die BTW nie geheel en al gebruik word vir die maak van belasbare lewerings nie, moet die ondernemer die sogenaamde BTW toedeel volgens ‘n erkende toedelingsmetode ingevolge artikel 17 van die BTW Wet. Hierdie metode moet aan die vereistes van regverdigheid en redelikheid voldoen. Hierdie werkstuk fokus en ontleed die hantering van die BTW aangegaan deur die ondernemer met die doel om die korrekte insetbelasting aftrekking te bepaal.

Thesis (MBA)--Stellenbosch University, 2007. / ENGLISH ABSTRACT: This research report evaluated the concept of Economic Value Added (EVA) and investigated the application of EVA as a performance measure to a particular company. It was found that EVA overcomes some of the problems associated with the traditional measures of company performance. These traditional measures are profit based and are calculated from standard accounting methods. They are inadequate measures to account for the creation of shareholder wealth, as they do not take the full cost of capital into account and also distort the economic reality of the company. It was however observed that there are limitations when applying EVA. It was found that significant effort (and associated costs) could be required to implement an EVA system in a company. The EVA calculation can also become very technical, and is heavily biased by the company's risk index (or beta coefficient), which is also a subjective measure (especially for private companies). In addition, the choice of adjustments to standard accounting methods have a significant impact on whether the company creates or destroys value in terms of EVA, and can lead to a certain degree of manipulation of the EVA calculation. In the case of the particular company reviewed, it was however found that these potential limitations were overshadowed by the benefits that can be gained from the increased focus on the creation of shareholder wealth that comes from the implementation ofEV A. It was concluded that should EVA be fully implemented at this particular company, it could form the backbone of the financial management and employee incentive system, guiding decisions made at all levels, and changing company culture so that every employee thinks and acts like an owner of the company. / AFRIKAANSE OPSOMMING: Hierdie navorsingsverslag het die konsep van Ekonomiese Toegevoegde Waarde (ETW) geevalueer, en ook die toepassing van ETW as prestasiemaatstaf by 'n spesifieke maatskappy ondersoek. Daar is gevind dat ETW sommige van die probleme wat geassosieer kan word met tradisionele maatstawwe van maatskappy prestasie (wins gebaseerde maatstawwe wat bereken word met die standaard rekenkundige metodes) kan oorkom. Hierdie maatstawwe is nie voldoende om die skepping van aandeelhouer welvaart te bereken nie, aangesien hulle nie die volle koste van kapitaal in berekening bring nie, en ook die ekonomiese realiteit van die maatskappy verwring. Daar is weI uitgewys dat ETW sekere beperkings het. Daadwerklike inspanning (asook gepaardgaande koste) kan nodig wees om 'n volle ETW implimentasie uit te voer, en die berekening van ETW kan ook baie tegnies wees. Die berekening word ook heweglik beinvloed deur die beta-koeffisient, wat op sy beurt ook 'n subjektiewe maatstaf is - veral vir privaat maatskappye. Gepaardgaande hiermee het die keuse van aanpassings aan die standaard rekenkundige metodes ook 'n groot impak op die eindproduk van ETW - of 'n maatskappy welvaart skep of vernietig. Dit kan op sy beurt lei tot 'n mate van manipulasie van die ETW berekening. In die geval van die spesifieke maatskappy wat ondersoek is in die navorsingsverslag was dit egter gevind dat die potensiele beperkings van ETW oorskadu word deur die voordele wat kan voortspruit uit die verhoogde fokus op die skepping van aandeelhouer welvaart wat gepaard gaan met die implementering van ETW. Daar was tot die slotsom gekom dat indien ETW ten volle implementeer sou word by die spesifieke maatskappy, dit die steunpilaar van die finansiele bestuur en werknemer vergoeding stelsel kan word, besluite op aIle vlakke kan beYnvloed, en die maatskappy se kultuur kan verander sodat elke werknemer kan dink en optree soos 'n eienaar van die maatskappy.

Thesis (MBA)--Stellenbosch University, 2000. / ENGLISH ABSTRACT: This report contains a strategic management model to assess the impact on the EVA тм of the individual business units and the consolidated group total of a Company, when manipulating any of the key business drivers. The model has been designed to deliver a solution to the end-user that is simple to operate and presents graphical outputs to enhance understanding and interpretation. The sensitivity analysis, the EVA тм tree and the financial statements are presented in Excel. A simulation technique is used to forecast NOPAT values from a set of key drivers. The theories used to construct the model are explained and a hypothetical example is provided. The appendices also provide the concept of EVA тм, simulation techniques, list of assumptions and model instructions. The report is comprehensive enough to allow the reader to develop, implement and test a model of this nature. Opportunities for further research are also provided. / AFRIKAANSE OPSOMMING: Hierdie studie bevat 'n strategiese bestuursmodel om die impak van individuele besigheidseenhede op ekonomiese waardetoevoeging (Engels: EVA тм) en die gekonsolideerde groeptotaal van 'n maatskappy, wanneer enige een van die sleutel besigheidsdrywers gemanipuleer word, te bepaal. Die model is ontwerp om 'n eenvoudige oplossing vir die eindgebruiker te verskaf en verskaf grafiese uiteensettings om verstaanbaarheid en interpretasie te vergemaklik. Die sensitiwiteitsanalise, ekonomiese waardetoevoegingsontleding en die finansiële state word in Excel weergee. 'n Simulasie tegniek is gebruik om NOPAT waardes van 'n stel sleutel drywers te voorspel. Die teorieë wat gebruik is om die model saam te stel, word aan die hand van 'n hipotetiese voorbeeld wat voorsien word, verduidelik. Die aanhangsels voorsien die konsep EVA тм, simulasie tegnieke, 'n lys van aannames en instruksies vir die model. Die verslag is volledig genoeg om die leser in staat te stel om 'n model van hierdie aard te ontwikkel, te toets en te implementer. Voorstelle vir verdere navorsing word voorsien.