A pesquisa teve como objetivo compreender o papel dos rearranjos de drenagem à evolução do relevo e da drenagem na bacia hidrográfica do Rio Capivari, situada no reverso da Serra do Mar, em São Paulo-SP. Parte-se da hipótese de que esses fenômenos seriam responsáveis por inúmeras anomalias de drenagem observadas, como: inflexões em ângulos retos, padrões de drenagem anômalos, colos, rupturas em perfis longitudinais e subdimensionamento de cursos dágua em relação aos vales. Especial ênfase foi dada à inflexão do alto Rio Capivari, localizada na confluência com o Ribeirão Embura, possível remanescente de uma captura fluvial, o qual melhor preserva as evidências de um rearranjo em toda a bacia. Os principais fatores dos rearranjos de drenagem na área foram: o forte gradiente hipsométrico proporcionado pela Serra do Mar, a densa trama de foliações e fraturas presentes no embasamento geológico, movimentações tectônicas recentes e as oscilações paleoclimáticas do Quaternário tardio. Sob influência dessas forças, alguns tributários da drenagem litorânea teriam se aproveitado de sua vantagem erosiva frente aos rios de planalto, produzido uma marcha de erosão regressiva em direção ao interior, com interferências nos canais situados em níveis sucessivamente mais elevados. Com base nas propostas metodológicas de Small (1972), Bishop (1995), Zaprowski et al. (2002) e Oliveira (2003), buscou-se a identificação de elementos morfológicos e sedimentológicos sugestivos desses processos, por meio de: análise de Modelos Digitais do Terreno (MDE) por métodos geomorfométricos; observação de fotografias aéreas; trabalhos de campo para descrição e coleta de materiais sedimentológicos; análise granulométrica, morfoscópica e mineralógica de sedimentos fluviais; e datação de sedimentos fluviais por Luminescência Óptica Estimulada para se estimar a idade da captura do alto curso do Rio Capivari. Os dados apresentados corroboram a hipótese de que o alto curso desse rio sofreu uma captura há cerca de 8.000 anos, no máximo, e que diversos outros casos de rearranjos de drenagem, entre eles reversões de grandes sistemas fluviais, seriam responsáveis pelas anomalias de drenagem observadas no interior da bacia estudada. / The aim of this research was to understand the role of drainage rearrangements on the evolution of relief and drainage in the Capivari River basin, located on the reverse of Serra do Mar range, in the state of São Paulo, Brazil. It is assumed that these phenomena would be responsible for numerous drainage anomalies observed, such as: river inflections at right angles, anomalous drainage patterns, cols, knickpoints and river underfitting, considered as indicative for drainage rearrangements. Special emphasis will be given to the inflection of the Capivari River at the confluence with the Ribeirao Embura, a possible remnant of a stream capture, which best preserves the evidence of a rearrangement throughout the basin. The main factors of the drainage rearrangements in the area would be: the strong hypsometric gradient provided by Serra do Mar range, the set of foliations and fractures densely present in the geological basement, recent tectonic movements and climatic oscillations of the Quaternary. Under the influence of these forcings, some tributaries of the coastal drainage would have taken erosive advantage over the plateau upside rivers, producing a regressive erosion march towards the interior of the continent, leading to interferences in the river systems situated at successively higher levels. Based on the methodological proposals of Small (1972), Bishop (1995), Zaprowski et al. (2002) and Oliveira (2003), we seek the identification of morphological and sedimentological elements that are suggestive of these processes, by means of: Digital Elevation Models (DEM) analysis by geomorphometric methods; observation of aerial photographs; fieldwork for description and collection of sedimentological materials; granulometric, morphoscopic and mineralogical analysis of fluvial sediments; and dating of fluvial sediments by Optically Stimulated Luminescence to estimate the age of capture of the upper reaches of the Capivari River. The presented data corroborate the hypothesis that the high course of the Capivari river was captured at least 8,000 years ago and that several other cases of drainage rearrangements, including reversals of large river systems, would be responsible for the observed drainage anomalies.

Devido à inexistência de um laboratório de padronização primária na América Latina, para calibração e dosimetria de fontes de radiação beta, neste trabalho uma câmara de extrapolação Böhm foi caracterizada e estabelecida como um sistema padrão primário no Laboratório de Calibração de Instrumentos (LCI) do IPEN. Como objetivo principal deste trabalho, a câmara de extrapolação Böhm foi caracterizada com relação à sua resposta em feixes padrões secundários de radiação beta de fontes de 90Sr+90Y, com duas janelas de entrada diferentes: Mylar aluminizado e Hostaphan grafitado, e com dois métodos de determinação de taxa de dose absorvida, para verificação do seu desempenho com cada material. Embora se trate do instrumento mais adequado para a calibração de detectores e fontes de radiação beta, a câmara de extrapolação deve ser utilizada apenas em laboratórios de calibração e não em programas de controle de qualidade, pois ela tem 7 kg e é de alto custo. Assim, é importante ter sistemas considerados padrões de trabalho e métodos alternativos para substituir a câmara de extrapolação em medições realizadas em campo, como em hospitais ou clínicas. Por este motivo, foram caracterizadas três câmaras de ionização de placas paralelas, com o objetivo de se verificar a possibilidade de seu uso como sistemas padrões de trabalho em programas de controle de qualidade, e também foram estudados materiais dosimétricos diferentes, em campos de radiação beta de 90Sr+90Y, utilizando-se os fenômenos da termoluminescência (TL) e da luminescência opticamente estimulada (LOE), como métodos alternativos na calibração de fontes de radiação beta. Inclui-se aqui o desenvolvimento de um sistema postal dosimétrico para a calibração de aplicadores clínicos de 90Sr+90Y. Os resultados obtidos com a câmara de extrapolação Böhm permitiram o seu estabelecimento como sistema padrão primário na calibração de fontes de 90Sr+90Y, pois a câmara com as duas janelas de entrada diferentes permitiram a determinação de taxas de dose absorvida no ar e no tecido, à profundidade nula e a 0,07 mm. A caracterização das três câmaras de ionização de placas paralelas mostraram que elas podem ser usadas em programas de controle de qualidade de fontes de radiação beta, pois suas respostas se apresentaram adequadas para esta finalidade. Os materiais dosimétricos testados com relação às suas respostas TL e LOE também se mostraram adequados para uso em campos de radiação beta, pois suas respostas foram satisfatórias. O sistema dosimétrico, utilizando dosímetros TL, foi testado em hospitais e, posteriormente, foi enviado na forma postal a um laboratório, contendo detectores TL e LOE, e o resultado da calibração dos aplicadores clínicos foi adequado. / Due to the lack of a primary standard laboratory at the Latin America, for the calibration and dosimetry of beta radiation sources, it was decided to establish the Böhm extrapolation chamber at the Calibration Laboratory (LCI) at IPEN as a primary standard. As a main objective of this work, the Böhm extrapolation chamber was characterized in relation to its response in beta radiation secondary standard beams of 90Sr+90Y sources, using two different entrance windows: aluminized Mylar and graphited Hostaphan, and using two methods of determination of absorbed dose rates, to verify its performance in each material. Although it is the most adequate instrument for the calibration of beta radiation detectors and sources, the extrapolation chamber should only be used at calibration laboratories, and not in quality control programs, because it weights 7 kg, and it is expensive. Thus, it is important to have systems considered work standards and alternative methods to replace the extrapolation chamber in measurements performed outside laboratories, such as in hospitals and clinics. For this reason, three parallel plate ionization chambers were characterized, with the objective to verify the possibility of their use as work standard systems, and different dosimetric materials were also studied, in beta radiation fields, using the thermoluminescence (TL) and optically stimulated luminescence (OSL) phenomena, as alternative methods for the calibration of beta radiation sources. The development of a dosimetric postal system for the calibration of 90Sr+90Y clinical applicators was included in this objective. The results obtained using the Böhm extrapolation chamber allowed its establishment as a primary standard system at the calibration of 90Sr+90Y sources, because it was possible to determine the absorbed dose rates in air and in the tissue, at null depth and 0.07 mm using the chamber with the two different entrance windows. The characterization of the three parallel plate ionization chambers showed that they can be used in quality control programs of beta radiation sources, because their responses were adequate to this purpose. The dosimetric materials were tested in relation to their TL and OSL response, and their use showed also to be adequate in beta radiation fields. The dosimetric postal system, using TL dosimeters, was tested in hospitals, and afterwards, it was sent to a laboratory, by conventional mail, with TL and OSL detectors, and the results of the calibration of the clinical applicators was adequate.

A Lagoa dos Patos (LP) é um dos ambientes oticamente complexos mais bem estudados no Brasil, e sua grande abrangência espacial, permite a união de diferentes medidas in situ com produtos de sensoriamento remoto, sendo possível entender melhor como os componentes óticos da água influenciam na sua cor. Florações de fitoplâncton possuem grande relevância ecológica e econômica, sendo o desenvolvimento de metologias simples para o seu monitoramento de vital importância. O presente trabalho utilizou produtos de coloração do oceano de imagens diárias dos sensores MODIS/Aqua e SeaWiFS durante os anos de 2002-2005, dados de modelos meteorológicos de reanálise para precipitação e velocidade do vento e dados de clorofila-a e salinidade obtidos in situ. Foi identificado que o espectro de reflectância de sensoriamento remoto é controlado pelo regime de El Niño e La Niña, variação intra anual e espacial (p<0.05), sendo a cor da água da LP em geral, característica de ambientes com alta concentração de CDOM/sedimentos ou de domínio misto. Partindo do pressuposto que o fitoplâncton domina o coeficiente de absorção da luz durante florações de fitoplâncton, e que as possíveis florações na LP se restringem a diatomáceas e cianobactérias, foi desenvolvido um modelo de classificação para discriminar a ocorrência desses eventos. O modelo proposto permite a classificação de águas oticamente complexas de acordo com o componente ótico predominante, e é pioneiro na exploração de dados do sensor MODIS/Aqua para detecção de florações de fitoplâncton em um ambiente lagunar / Patos Lagoon (PL) is one of the optical complex environment best studied in Brazil, and it large spatial extent, allows the union of different in situ and remote sensing measures, enabling a better understandment of how the optical components in water can influence its color. Phytoplankton blooms have great ecological and economic relevance, and the development of simple methodologies for your monitoring of vital importance. The present work used ocean color products from daily MODIS/Aqua and SeaWiFS images during the years 2002-2005, meteorological model data for precipitation and wind speed and chlorophyll-a and sailinity data obtained in situ. It was detected that remote sensing reflectance spectra is controlled by the regime of El Niño and La Niña, intra annual and spatial changes (p<0.05), ande the water color from PL in general, characteristic of environments with high CDOM/sediments concentration or with mixed domain. Assuming that the phytoplankton dominate light absorption coefficient during phytoplankton blooms, and that PL possible blooms are restricted to diatom and cyanobacteria, a classification model was developed to discriminate the occurance of those events. The proposed model allows for the classification of optically complex waters according to the predominant optical component, and it is pioneer in the exploration of data from MODIS/Aqua sensor to detect phytoplankton blooms in lagunar environment

Outcrops of late Quaternary deposits along the north–east coast of Mallorca were examined, and a high resolution chronological framework established using optically stimulated luminescence of quartz and feldspar grains. Coastal sections at Es Barrancar and Cala Mata record a complex succession of alluvial fan deposition with a minor aeolian component, mainly deposited during the last two glacial cycles. For the last ~200ka different orbital configurations appear to have produced a series of subtly different climatic scenarios that resulted in great variations in the regional availability of moisture. In turn, each of these climatic scenarios set in motion a distinct set of sedimentary processes, which imprinted themselves upon the character of fluvial system response recorded in the alluvial archives on Mallorca. Within the resulting complex of sediments were units of fluvially reworked aeolianite which, although truncated in places, were traceable laterally along wide sections of the sea front outcrops of both fan systems. These archives yielded 47 new OSL and pIRIR290 ages which suggest a number of previously unrecognised periods of enhanced fluvial activity. Luminescence ages identify significant ephemeral fluvial activity taking place during MIS 6, MIS 5 sub-stages d/c, b/a, and across the MIS 5/4 boundary. Another major phase of reworking corresponds with the middle part of MIS 3, and continued sporadically into the Last Glacial Maximum. These fluvial reworking events have been interpreted as having taken place during cold arid climatic intervals, when vegetation was at a minimum, precipitation was low and displayed a much higher degree of seasonality, enhancing the effects of runoff.

O óxido de alumínio foi um dos primeiros compostos investigados, com vista a detectar e medir a radiação por meio da termoluminescência (TL). Comumente referido como \"alumina\", o óxido de alumínio tem características interessantes para o desenvolvimento de materiais para a dosimetria. Seu número atômico efetivo é intermediário entre o do osso e do tecido mole do corpo. Pode ser transformado em material termoluminescente pela inserção de elementos químicos em sua estrutura cristalina. Além da TL, a alumina pode apresentar luminescência opticamente estimulada (OSL), fenômeno que também pode ser usado para determinar a dose de radiação. Neste estudo, dois métodos foram investigados para inserir íons metálicos na alumina. O primeiro método foi baseado na capacidade de adsorção da alumina e o segundo denominado método da coprecipitação foi baseado na formação simultânea de compostos insolúveis. As amostras obtidas por adsorção de íons Cu2+ e Mn2+ não mostraram resultados satisfatórios. No entanto, as pastilhas de óxido de alumínio impurificado com Tm3+ via coprecipitação mostraram sinais de TL e OSL. Foi verificado também que a alumina eletrofundida disponível comercialmente é um material que apresenta resposta TL e OSL. Este material que contém diversos íons metálicos em sua estrutura foi transformado em pastilhas por sinterização com vidro. As curvas da resposta TL em função da temperatura e da resposta TL e OSL em função da dose foram determinadas. Os resultados obtidos indicam que estudos mais aprofundados das pastilhas desenvolvidas podem melhorar suas características para que sejam aplicadas em dosimetria. / The aluminum oxide was one of the former compounds investigated with a view to detecting and measuring radiation by means of the thermoluminescence (TL). Commonly referred to as \"alumina\", aluminum oxide has interesting features for the development of materials for dosimetry. Its effective atomic number has an intermediate value between the bone and soft tissue of the body. It can be transformed into TL material by the insertion of chemical elements in its crystal structure. In addition to the TL, the alumina can provide optically stimulated luminescence (OSL) which can also be used to determine the radiation dose. In this study, two methods were investigated in order to insert metal ions in alumina. The first method was based on the adsorption capacity of alumina and the second named coprecipitation method was based on the simultaneous formation of insoluble compounds. The samples obtained by adsorption of Cu2+ and Mn2+ ions did not show satisfactory results. However, the aluminum oxide impurified with Tm3+ by coprecipitation showed TL and OSL signals. It was also found that the commercially available electrofused alumina is a material that exhibits TL and OSL. This material that contains various metal ions in its structure was made into pellets by sintering with glass. The TL response curves as a function of temperature and the TL and OSL responses as a function of the dose were determined. The obtained results indicate that further studies of the developed pellets can improve the characteristics in order to be applied in dosimetry.

O óxido de alumínio foi um dos primeiros compostos investigados, com vista a detectar e medir a radiação por meio da termoluminescência (TL). Comumente referido como \"alumina\", o óxido de alumínio tem características interessantes para o desenvolvimento de materiais para a dosimetria. Seu número atômico efetivo é intermediário entre o do osso e do tecido mole do corpo. Pode ser transformado em material termoluminescente pela inserção de elementos químicos em sua estrutura cristalina. Além da TL, a alumina pode apresentar luminescência opticamente estimulada (OSL), fenômeno que também pode ser usado para determinar a dose de radiação. Neste estudo, dois métodos foram investigados para inserir íons metálicos na alumina. O primeiro método foi baseado na capacidade de adsorção da alumina e o segundo denominado método da coprecipitação foi baseado na formação simultânea de compostos insolúveis. As amostras obtidas por adsorção de íons Cu2+ e Mn2+ não mostraram resultados satisfatórios. No entanto, as pastilhas de óxido de alumínio impurificado com Tm3+ via coprecipitação mostraram sinais de TL e OSL. Foi verificado também que a alumina eletrofundida disponível comercialmente é um material que apresenta resposta TL e OSL. Este material que contém diversos íons metálicos em sua estrutura foi transformado em pastilhas por sinterização com vidro. As curvas da resposta TL em função da temperatura e da resposta TL e OSL em função da dose foram determinadas. Os resultados obtidos indicam que estudos mais aprofundados das pastilhas desenvolvidas podem melhorar suas características para que sejam aplicadas em dosimetria. / The aluminum oxide was one of the former compounds investigated with a view to detecting and measuring radiation by means of the thermoluminescence (TL). Commonly referred to as \"alumina\", aluminum oxide has interesting features for the development of materials for dosimetry. Its effective atomic number has an intermediate value between the bone and soft tissue of the body. It can be transformed into TL material by the insertion of chemical elements in its crystal structure. In addition to the TL, the alumina can provide optically stimulated luminescence (OSL) which can also be used to determine the radiation dose. In this study, two methods were investigated in order to insert metal ions in alumina. The first method was based on the adsorption capacity of alumina and the second named coprecipitation method was based on the simultaneous formation of insoluble compounds. The samples obtained by adsorption of Cu2+ and Mn2+ ions did not show satisfactory results. However, the aluminum oxide impurified with Tm3+ by coprecipitation showed TL and OSL signals. It was also found that the commercially available electrofused alumina is a material that exhibits TL and OSL. This material that contains various metal ions in its structure was made into pellets by sintering with glass. The TL response curves as a function of temperature and the TL and OSL responses as a function of the dose were determined. The obtained results indicate that further studies of the developed pellets can improve the characteristics in order to be applied in dosimetry.

A luminescência opticamente estimulada (OSL) é a luminescência emitida por um material, isolante ou semicondutor, durante exposição à luz e que foi previamente exposto à radiação ionizante. Portanto, depende da quantidade de cargas armadilhadas na estrutura do material, o que por sua vez depende da dose de radiação absorvida pela amostra. Dessa forma, a busca por novos materiais para serem utilizados como detectores de radiação envolve a criação de defeitos que atuem como armadilhas e/ou centros luminescentes. Recentemente, as interações entre os plásmons de nanopartículas metálicas e centros luminescentes têm sido utilizadas para aumentar a intensidade luminescente emitida por diversos materiais. Nesse trabalho, foi investigada a possibilidade de aplicação das propriedades plasmônicas de nanoestruturas de prata e ouro, no aumento da emissão OSL. Para isso, foram testados como dosímetros OSL, compósitos de cloreto de sódio contendo nano e micropartículas de prata; compósitos de óxido de zinco contendo nanopartículas de ouro e prata; e amostras de cloreto de sódio depositado sobre filmes de nanopartículas de prata e ouro. As amostras foram caracterizadas por diversas técnicas como espectroscopia UV-Vis, espalhamento dinâmico de luz, espectroscopia na região do infravermelho, espectroscopia de fotoluminescência, microscopia eletrônica de transmissão, microscopia de força atômica, entre outras. Foi possível verificar que a intensificação dos campos elétricos locais em torno de nanopartículas metálicas em condições de ressonância plasmônica aumenta a taxa de desarmadilhamento de elétrons durante a estimulação OSL. O acoplamento plasmônico causou aumento das taxas de decaimento radiativo e redução das taxas de decaimento não radiativo, produzindo aumento da intensidade OSL. Além disso, as interações entre as armadilhas/centros luminescentes e os plásmons variam de acordo com a distância entre as partes, e a maior intensidade OSL foi obtida para amostras em que houve um espaçamento de aproximadamente 15 nm entre o NaCl o filme de nanopartículas de prata. Portanto, é possível utilizar as propriedades plasmônicas de nanoestruturas metálicas para aumentar a intensidade da luminescência opticamente estimulada, dando origem a novos e mais sensíveis detectores e dosímetros das radiações ionizantes. / Optically stimulated luminescence (OSL) is a well-known light emission process involving light stimulation of an insulator/semi-conductor material previously exposed to ionizing radiation. The intensity of the emitted light is proportional to the ionizing radiation dose previously absorbed by the material. Developing appropriate OSL materials for radiation detection and dosimetry is based on the doping and co-doping of a host material to create defects that can act as traps and/or luminescent centers. In this context, plasmon interaction with luminescent centers from OSL materials could be a new, different, and unexplored method to achieve enhanced OSL intensity and consequently improve their sensitivity as radiation detectors. In this study, we investigated whether it is possible to use the plasmonic properties of noble metal nanoparticles to obtain plasmon-enhanced OSL. To this end, we produced samples of NaCl containing nano and microparticles; composites of ZnO containing silver and gold nanoparticles; as well as samples of NaCl deposited over films of gold and silver nanoparticles. Each sample has been tested as a radiation detector by means of optically stimulated luminescence, in addition to having their materials properties analyzed by UV-Vis absorption spectroscopy, dynamic light scattering, transmission electron microscopy (TEM), atomic force microscopy, and Fourier Transform Infrared spectroscopy (FTIR). We discovered that the electric field intensification around nanoparticles under plasmon resonance conditions enhances the excitation rate of trapped electrons. The plasmon coupling during the emission process increases the radiative and diminishes the non-radiative decay rates, leading to enhanced OSL intensities. Furthermore, the interaction between traps/luminescent centers and plasmons is highly dependent on the distance between them, and the maximum OSL intensity was observed for samples with 15 nm spacing between the NaCl and the silver nanoparticle films. Therefore, it is possible to use the plasmon properties of metal nanostructures to increase OSL, giving rise to new and more sensitive ionizing radiation detectors and dosimeters.

<p>One of the traditional approaches to reduce costs of solar energy is to use inexpensive reflectors to focus the light onto highly efficient solar cells. Several research projects have resulted in designs, where the excess heat is used as solar thermal energy.</p><p>Unlike a solar thermal system, which has a selective surface to reduce the radiant heat loss, a CPV/T (Concentrating PhotoVoltaic/Thermal) system uses a receiver covered with solar cells with high thermal emittance.</p><p>This project analyzes whether the heat loss from the receiver can be reduced by covering parts of the receiver surface, not already covered with solar cells, with an optically selective coating. Comparing different methods of applying such a coating and the long-term stability of low cost alternatives are also part of the objectives of this project.</p><p>To calculate the heat loss reductions of the optically selective surface coating a mathematical model was developed, which takes the thermal emittances and the solar absorptances of the different surfaces into account. Furthermore, a full-size experiment was constructed to verify the theoretical predictions.</p><p>The coating results in a heat loss reduction of approximately 20 % in such a CPV/T system and one of the companies involved in the study is already changing their design to make use of the results.</p>

Due to the unique environmental conditions and different feedback mechanisms, the Arctic region is especially sensitive to climate changes. The influence of clouds on the radiation budget is substantial, but difficult to quantify and parameterize in models. In the framework of the PhD, elastic backscatter and depolarization lidar observations of Arctic clouds were performed during the international Arctic Study of Tropospheric Aerosol, Clouds and Radiation (ASTAR) from Svalbard in March and April 2007. Clouds were probed above the inaccessible Arctic Ocean with a combination of airborne instruments: The Airborne Mobile Aerosol Lidar (AMALi) of the Alfred Wegener Institute for Polar and Marine Research provided information on the vertical and horizontal extent of clouds along the flight track, optical properties (backscatter coefficient), and cloud thermodynamic phase. From the data obtained by the spectral albedometer (University of Mainz), the cloud phase and cloud optical thickness was deduced. Furthermore, in situ observations with the Polar Nephelometer, Cloud Particle Imager and Forward Scattering Spectrometer Probe (Laboratoire de Météorologie Physique, France) provided information on the microphysical properties, cloud particle size and shape, concentration, extinction, liquid and ice water content. In the thesis, a data set of four flights is analyzed and interpreted. The lidar observations served to detect atmospheric structures of interest, which were then probed by in situ technique. With this method, an optically subvisible ice cloud was characterized by the ensemble of instruments (10 April 2007). Radiative transfer simulations based on the lidar, radiation and in situ measurements allowed the calculation of the cloud forcing, amounting to -0.4 W m-2. This slight surface cooling is negligible on a local scale. However, thin Arctic clouds have been reported more frequently in winter time, when the clouds' effect on longwave radiation (a surface warming of 2.8 W m-2) is not balanced by the reduced shortwave radiation (surface cooling). Boundary layer mixed-phase clouds were analyzed for two days (8 and 9 April 2007). The typical structure consisting of a predominantly liquid water layer on cloud top and ice crystals below were confirmed by all instruments. The lidar observations were compared to European Centre for Medium-Range Weather Forecasts (ECMWF) meteorological analyses. A change of air masses along the flight track was evidenced in the airborne data by a small completely glaciated cloud part within the mixed-phase cloud system. This indicates that the updraft necessary for the formation of new cloud droplets at cloud top is disturbed by the mixing processes. The measurements served to quantify the shortcomings of the ECMWF model to describe mixed-phase clouds. As the partitioning of cloud condensate into liquid and ice water is done by a diagnostic equation based on temperature, the cloud structures consisting of a liquid cloud top layer and ice below could not be reproduced correctly. A small amount of liquid water was calculated for the lowest (and warmest) part of the cloud only. Further, the liquid water content was underestimated by an order of magnitude compared to in situ observations. The airborne lidar observations of 9 April 2007 were compared to space borne lidar data on board of the satellite Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO). The systems agreed about the increase of cloud top height along the same flight track. However, during the time delay of 1 h between the lidar measurements, advection and cloud processing took place, and a detailed comparison of small-scale cloud structures was not possible. A double layer cloud at an altitude of 4 km was observed with lidar at the West coast in the direct vicinity of Svalbard (14 April 2007). The cloud system consisted of two geometrically thin liquid cloud layers (each 150 m thick) with ice below each layer. While the upper one was possibly formed by orographic lifting under the influence of westerly winds, or by the vertical wind shear shown by ECMWF analyses, the lower one might be the result of evaporating precipitation out of the upper layer. The existence of ice precipitation between the two layers supports the hypothesis that humidity released from evaporating precipitation was cooled and consequently condensed as it experienced the radiative cooling from the upper layer. In summary, a unique data set characterizing tropospheric Arctic clouds was collected with lidar, in situ and radiation instruments. The joint evaluation with meteorological analyses allowed a detailed insight in cloud properties, cloud evolution processes and radiative effects. / Die Arktis mit ihren speziellen Umweltbedingungen ist besonders empfindlich gegenüber Klimaveränderungen. Dabei spielen Wolken eine große Rolle im Strahlungsgleichgewicht, die aber nur schwer genau bestimmt und in Klimamodellen dargestellt werden kann. Die Daten für die Promotionsarbeit wurden im Frühjahr 2007 bei Flugzeug-Messungen von Wolken über dem Arktischen Ozean von Spitzbergen aus erhoben. Das dafür verwendete Lidar (Licht-Radar) des Alfred-Wegener-Instituts lieferte ein höhenaufgelöstes Bild der Wolkenstrukturen und ihrer Streu-Eigenschaften, andere Messgeräte ergänzten optische sowie mikrophysikalische Eigenschaften der Wolkenteilchen (Extinktion, Größenverteilung, Form, Konzentration, Flüssigwasser- und Eisgehalt, Messgeräte vom Laboratoire de Météorologie Physique, France) und Strahlungsmessungen (Uni Mainz). Während der Messkampagne herrschte Nordwind vor. Die untersuchten Luftmassen mit Ursprung fern von menschlichen Verschmutzungsquellen war daher sehr sauber. Beim Überströmen der kalten Luft über den offenen warmen Arktischen Ozean bildeten sich in der Grenzschicht (ca. 0-1500 m Höhe) Mischphasenwolken, die aus unterkühlten Wassertröpfchen im oberen Bereich und Eis im unteren Bereich der Wolken bestehen. Mit den Flugzeug-Messungen und numerischen Simulationen des Strahlungstransports wurde der Effekt einer dünnen Eiswolke auf den Strahlungshaushalt bestimmt. Die Wolke hatte lokal eine geringe Abkühlung der Erdoberfläche zur Folge. Ähnliche Wolken würden jedoch im Winter, wenn keine Sonnenstrahlung die Arktis erreicht, durch den Treibhauseffekt eine nicht vernachlässigbare Erwärmung der Oberfläche verursachen. Die Messungen der Mischphasenwolken wurden mit einem Wettervorhersagemodell (ECMWF) verglichen. Für die ständig neue Bildung von flüssigen Wassertropfen im oberen Teil der Wolke ist das Aufsteigen von feuchten Luftpaketen nötig. Während einer Messung wurden entlang der Flugstrecke verschiedene Luftmassen durchflogen. An der Luftmassengrenze wurde eine reine Eiswolke inmitten eines Mischphasen-Systems beobachtet. Die Messungen zeigen, dass das Mischen von Luftmassen den Nachschub an feuchter Luft blockiert, was unmittelbare Auswirkungen auf die thermodynamische Phase des Wolkenwassers hat. Weiterhin wurde bestimmt, wie groß die Abweichungen der Modellrechnungen von den Messungen bezüglich Wassergehalt und der Verteilung von Flüssigwasser und Eis waren. Durch die vereinfachte Wolken-Parameterisierung wurde die typische vertikale Struktur von Mischphasenwolken im Modell nicht wiedergegeben. Die flugzeuggetragenen Lidar-Messungen vom 9. April 2007 wurden mit Lidar-Messungen an Bord des Satelliten CALIPSO (Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations) verglichen. Die Messungen zeigten beide eine ansteigende Wolkenobergrenze entlang desselben Flugwegs. Da die Messungen jedoch nicht genau gleichzeitig durchgeführt wurden, war wegen Advektion und Prozessen in den Wolken kein genauer Vergleich der kleinskaligen Wolkenstrukturen möglich. Außerdem wurde eine doppelte Wolkenschicht in der freien Troposphäre (4 km Höhe) analysiert. Die Wolke bestand aus zwei separaten dünnen Schichten aus flüssigem Wasser (je 150 m dick) mit jeweils Eis darunter. Die untere Schicht entstand wahrscheinlich aus verdunstetem Eis-Niederschlag. Diese feuchte Schicht wurde durch die Abstrahlung der oberen Wolkenschicht gekühlt, so dass sie wieder kondensierte. Solche Wolkenformationen sind in der Arktis bisher vor allem in der Grenzschicht bekannt. Ein einzigartiger Datensatz von arktischen Wolken wurde mit einer Kombination verschiedener Flugzeug-Messgeräte erhoben. Zusammen mit meteorologischen Analysen konnten für verschiedene Fallstudien Wolkeneigenschaften, Entwicklungsprozesse und Auswirkungen auf den Strahlungshaushalt bestimmt werden.

The objective of this study is to perform Optically Stimulated Luminescence (OSL) dating on the ceramic samples from different parts of the Laodikeia by using Infra Red Stimulated Luminescence (IRSL) on polyminerals. As a first step, a literature survey has been done about the dating system and the methodology of dating. The calibration of the system was done before carrying out the experiments. The six ceramic samples were collected from the site and dated. The mineral compositions of the samples were examined by X-ray Diffraction Analysis, which showed that all samples contain quartz, feldspars, calcites and together with other minerals. The equivalent dose was found by using Multiple Aliquot Additive Dose (MAAD) and Multiple Aliquot Regenerative Dose (MARD) techniques using Infra Red diode array of the system that gave the IRSL ages for samples. Alpha counter measured the dose components of uranium and thorium contributions to the annual dose. The potassium concentration was determined by Atomic Emission Spectrometry. The cosmic ray component of annual dose was evaluated by the Al2O3:C Thermoluminescence Dosimeter (TLD) discs which have been placed and kept for 8 and 11 months in the site. From the data the IRSL ages were calculated for six ceramic samples LDKY-1, LDKY-2, LDKY-3, LDKY-4, LDKY-5 and LDKY-6 with the help of the OSL system software. The IRSL ages for these samples, in the given order, are 737 &plusmn / 60, 1563 &plusmn / 120, 1445 &plusmn / 110, 1602 &plusmn / 120, 1034 &plusmn / 80 and 1034 &plusmn / 80 years by using MAAD technique. The IRSL ages for the same samples are 870 &plusmn / 60, 1550 &plusmn / 120, 1440 &plusmn / 110, 1600 &plusmn / 120, 1030 &plusmn / 80 and 1030 &plusmn / 70 years by using MARD technique.