Percebe-se um interesse da indústria de fabricação de tintas na utilização de nanopartículas de prata devido às suas propriedades antimicrobianas. Neste trabalho, objetivou-se sintetizar e caracterizar soluções coloidais de nanopartículas de prata para ser um potencial aditivo antimicrobiano em tintas acrílicas à base d’água. No processo experimental, as nanopartículas de prata foram preparadas pela redução de íons de prata por boroidreto de sódio e estabilizada, utilizando citrato trissódico dihidrado. As caraterizações das nanopartículas de prata foram realizadas por espectroscopia de UV-Visível, microscopia eletrônica de transmissão e antibiograma contra bactérias Gram-positivas e Gram-negativas. Os espectros de UV-vis foram muito similares para as NPs Ag 18 ppm e para as NPs Ag 1000 ppm com os espectros de absorção na região de 400nm, que indica a presença de NPs Ag com forma esférica. Pela microscopia eletrônica de transmissão confirmou-se a presença das NPs Ag na forma esférica e observou-se a diferença de tamanho de partículas, sendo que para as NPs Ag a média foi de 7,32 nm e para NPs Ag 1000 ppm foi de 15,2 nm. O antibiograma demonstrou que as NPs Ag 18 ppm e de 1000 ppm apresentam atividade antibacteriana contra a bactéria Gram-negativa Escherichia coli e contra a bactéria Gram-positiva Staphylococcus aureus. No filme de tinta aplicado, avaliou-se a diferença de cor da tinta branca após a adição das NPs Ag, utilizando um espectrofotômetro e a perda de brilho após o ensaio de intemperismo acelerado sob radiação UV-B. Foi verificado que as NPs Ag não têm efeito sobre a perda de brilho do filme de tinta, porém induzem ao amarelamento do mesmo. Os resultados foram positivos para o ensaio de resistência a bactérias conforme a norma JIS Z 2801:2000 somente para as amostras de tinta acrílica à base d’água e verniz acrílico à base d’água com 100 ppm de NPs Ag. Para as amostras de tintas e vernizes com 3,6 ppm e 30 ppm de NPs Ag não houve efeito inibitório. Para o ensaio de resistência a fungos, segundo a norma ABNT NBR 14941, as tintas não apresentaram efeito inibitório satisfatório. / There is a particular interest of the paint manufacturing industry by using silver nanoparticles due its antimicrobial properties. This study has as objective to synthesize and characterize silver nanoparticles colloidal solutions as a potential antimicrobial additive in water-based acrylic paints. In the experimental process, the silver nanoparticles were prepared by reduction the silver ions by sodium borohydride and used trisodium citrate dihydrate as stabilizing agent. The characterizations of the silver nanoparticles were realized by spectroscopy in the infrared region, transmission electronic microscopy and Gram positive and Gram negative antibiograms. The UV-vis results were similar for the NPs Ag 18 ppm and NPs Ag 1000 ppm samples with the absorption spectra in the range of 400nm, which indicates the presence of de NPs Ag in a spherical format. By the transmission electron microscopy it was noted the presence of NPs Ag in a spherical format and differences in the particles sizes for NPs Ag (media of 7.32 nm) and for NPs Ag 1000 ppm (media of 15.2 nm) samples. The antibiogram test demonstrates that the 18 ppm and the 1000 ppm NPs Ag showed antibacterial activity against the Gram negative bacterium Escherichia coli and against the Gram positive bacteria Staphylococcus aureus. In the paint film, it was avaluated the difference of the white color after the incorporation of the NPs Ag using a spectrophotometer and the brightness lost after the UV-B accelerated weathering testing. It was noted that the NPs Ag had no effect in the brightness lost of the paint film; however inducing to the yellowing of the same. The results were positive for the bacterial resistances according to JIS Z 2801:2000 only for the water-based acrylic paints and varnish containing 100 ppm of NPs Ag. For the samples with 3,6 ppm and 30ppm it was not noted an inhibitory effect. Finally, for the fungal resistance according to ABNT NBR 14941 the paints do not showed satisfactory inhibitory effect.

Percebe-se um interesse da indústria de fabricação de tintas na utilização de nanopartículas de prata devido às suas propriedades antimicrobianas. Neste trabalho, objetivou-se sintetizar e caracterizar soluções coloidais de nanopartículas de prata para ser um potencial aditivo antimicrobiano em tintas acrílicas à base d’água. No processo experimental, as nanopartículas de prata foram preparadas pela redução de íons de prata por boroidreto de sódio e estabilizada, utilizando citrato trissódico dihidrado. As caraterizações das nanopartículas de prata foram realizadas por espectroscopia de UV-Visível, microscopia eletrônica de transmissão e antibiograma contra bactérias Gram-positivas e Gram-negativas. Os espectros de UV-vis foram muito similares para as NPs Ag 18 ppm e para as NPs Ag 1000 ppm com os espectros de absorção na região de 400nm, que indica a presença de NPs Ag com forma esférica. Pela microscopia eletrônica de transmissão confirmou-se a presença das NPs Ag na forma esférica e observou-se a diferença de tamanho de partículas, sendo que para as NPs Ag a média foi de 7,32 nm e para NPs Ag 1000 ppm foi de 15,2 nm. O antibiograma demonstrou que as NPs Ag 18 ppm e de 1000 ppm apresentam atividade antibacteriana contra a bactéria Gram-negativa Escherichia coli e contra a bactéria Gram-positiva Staphylococcus aureus. No filme de tinta aplicado, avaliou-se a diferença de cor da tinta branca após a adição das NPs Ag, utilizando um espectrofotômetro e a perda de brilho após o ensaio de intemperismo acelerado sob radiação UV-B. Foi verificado que as NPs Ag não têm efeito sobre a perda de brilho do filme de tinta, porém induzem ao amarelamento do mesmo. Os resultados foram positivos para o ensaio de resistência a bactérias conforme a norma JIS Z 2801:2000 somente para as amostras de tinta acrílica à base d’água e verniz acrílico à base d’água com 100 ppm de NPs Ag. Para as amostras de tintas e vernizes com 3,6 ppm e 30 ppm de NPs Ag não houve efeito inibitório. Para o ensaio de resistência a fungos, segundo a norma ABNT NBR 14941, as tintas não apresentaram efeito inibitório satisfatório. / There is a particular interest of the paint manufacturing industry by using silver nanoparticles due its antimicrobial properties. This study has as objective to synthesize and characterize silver nanoparticles colloidal solutions as a potential antimicrobial additive in water-based acrylic paints. In the experimental process, the silver nanoparticles were prepared by reduction the silver ions by sodium borohydride and used trisodium citrate dihydrate as stabilizing agent. The characterizations of the silver nanoparticles were realized by spectroscopy in the infrared region, transmission electronic microscopy and Gram positive and Gram negative antibiograms. The UV-vis results were similar for the NPs Ag 18 ppm and NPs Ag 1000 ppm samples with the absorption spectra in the range of 400nm, which indicates the presence of de NPs Ag in a spherical format. By the transmission electron microscopy it was noted the presence of NPs Ag in a spherical format and differences in the particles sizes for NPs Ag (media of 7.32 nm) and for NPs Ag 1000 ppm (media of 15.2 nm) samples. The antibiogram test demonstrates that the 18 ppm and the 1000 ppm NPs Ag showed antibacterial activity against the Gram negative bacterium Escherichia coli and against the Gram positive bacteria Staphylococcus aureus. In the paint film, it was avaluated the difference of the white color after the incorporation of the NPs Ag using a spectrophotometer and the brightness lost after the UV-B accelerated weathering testing. It was noted that the NPs Ag had no effect in the brightness lost of the paint film; however inducing to the yellowing of the same. The results were positive for the bacterial resistances according to JIS Z 2801:2000 only for the water-based acrylic paints and varnish containing 100 ppm of NPs Ag. For the samples with 3,6 ppm and 30ppm it was not noted an inhibitory effect. Finally, for the fungal resistance according to ABNT NBR 14941 the paints do not showed satisfactory inhibitory effect.

Made available in DSpace on 2014-10-09T12:50:35Z (GMT). No. of bitstreams: 0 / Made available in DSpace on 2014-10-09T13:58:48Z (GMT). No. of bitstreams: 1 00564.pdf: 1028671 bytes, checksum: 3dcd1ac2de3b700115cf35bed8c5ce22 (MD5) / Dissertacao (Mestrado) / IEA/D / Instituto de Energia Atomica - IEA

Made available in DSpace on 2014-10-09T12:51:08Z (GMT). No. of bitstreams: 0 / Made available in DSpace on 2014-10-09T14:01:29Z (GMT). No. of bitstreams: 1 11248.pdf: 11359579 bytes, checksum: 01f4dbcf2ba16c62fa4d6ba4397ac463 (MD5) / Dissertacao (Mestrado) / IPEN/D / Instituto de Pesquisas Energeticas e Nucleares - IPEN/CNEN-SP

Orientador: Maria Izabel Maretti Silveira Bueno / Tese (doutorado) - Universidade Estadual de Campinas, Instituto de Quimica / Made available in DSpace on 2018-08-09T19:56:43Z (GMT). No. of bitstreams: 1 Pereira_FabiolaManhasVerbi_D.pdf: 3497538 bytes, checksum: 1fb4f6d6dcc544540876238e76e5b33b (MD5) Previous issue date: 2007 / Resumo: Este trabalho de tese apresenta um procedimento inovador para detectar modificações orgânicas em tintas utilizando Espectroscopia de Raios-X (XRS, X-Ray Spectroscopy) e Análise de Componentes Principais (PCA, Principal Component Analysis). Para esta finalidade foram avaliadas amostras de vernizes, tintas e primers, após serem submetidas a vários testes de exposição, em campo ou em laboratório. Espectros de raios-X foram obtidos utilizando um tubo de raios-X de Rh e a análise de PCA foi efetuada na região de 18 a 24 keV, onde se manifesta o espalhamento de radiação da fonte de Rh. Os gráficos de scores evidenciaram a classificação das amostras conforme a resistência perante aos testes. Esta diferenciação foi promovida pelos Efeitos Compton e Rayleigh, visualizados na região de 18 a 24 keV. Outra parte deste trabalho mostra um método analítico complementar para a avaliação do controle de qualidade. Para o desenvolvimento deste, imagens provenientes das amostras citadas anteriormente, foram digitalizadas com um scanner convencional. As imagens foram convertidas em histogramas de cores em tons de cinza. Os dados foram organizados em uma matriz e analisados com o auxílio da PCA. Com a combinação de informações obtidas com a XRS, as imagens e a PCA foi possível selecionar o melhor produto, evitando interpretações subjetivas. Na parte final do estudo foi desenvolvida a calibração multivariada das propriedades de vernizes e de tintas combinando XRS e Regressão por Mínimos Quadrados Parciais (PLS, Partial Least Squares). As propriedades potenciais para a calibração foram: teor de sólidos/massa (erros entre -14,3 e 17,6%) e massa específica (erros entre -3,29 e 4,42%). Para as tintas, estas propriedades foram: viscosidade Stormer (erros entre -7 e 10%) e brilho especular (erros entre -16,3 e 16,5%) / Abstract: This work presents an unconventional form to detect organic modifications in paints employing X-ray Spectroscopy (XRS) and Principal Component Analysis (PCA). For this purpose, different samples, such as varnishes, paints and primers were submitted to accelerated laboratory and outdoor exposure tests. X-ray fluorescence spectra were obtained using a Rh tube-EDXRF system. PCA was performed using the spectral region from 18 to 24 keV, where X-ray source scattering effects are observed. The scores plots showed a clear paint classification and also a separation according to its performance in the tests. This separation was promoted by Compton and Rayleigh Effects. It is also shown a complementary analytical method for evaluating quality of paints. Digitalized images were obtained from the samples described above using a conventional scanner. The images were converted into gray colour scale histograms and the resulting data were organized into a matrix and analyzed with PCA. It was possible to identify the best performances of varnishes, paints and primers avoiding subjective interpretations. In the last part of this study, analytical methods for multivariate calibration of varnishes and paints properties combining XRS with Partial Least Squares (PLS) data treatment were developed. The potential calibrated properties for varnishes were nonvolatile content (errors from -14.3 to 17.6%) and density (errors from -3.29 to 4.42%). For paints, the potential calibrated properties were Stormer viscosity (errors from -7 to 10%) and specular gloss (errors from -16.3 to 16.5%) / Doutorado / Quimica Analitica / Doutor em Ciências

No description available.

Rheology modifiers such as hydrophobically-modified ethoxylated urethane (HEUR)thickeners are included in waterborne latex coatings to optimize shear-rate dependent viscosity and other rheological properties. While these HEUR polymers are commonly used in industry, the complex chemical interactions that contribute to rheological properties are still not completely understood. Prior work in this area has focused on understanding latex-HEUR and latex-surfactant-HEUR interactions that affect rheological properties. Additionally, studies have been previously conducted to understand the relaxation mechanisms of complex interactions present in HEUR-thickened waterborne latex coatings under various dynamic conditions. The objective of this work is to extend the experimental work to fully-formulated coatings and determine the effects of additional ingredients in a fully-formulated system. Coating formulations were prepared with a target 90 KU (Kreb Units) viscosity, having 0.23wt% HEUR. The pigment volume concentration (PVC) and non-volatiles by volume (NVV) were kept constant at 19.87% and 30.47%, respectively. An analysis of phase stability (presence or absence of syneresis), flow sweep (10-2 to 103 s-1), oscillatory strain (10-2 to 102 %), and oscillatory frequency (10-2 to 102 Hz) data was carried out in an attempt to determine connections among these properties. Furthermore, brief comparisons were made with previous results on latex-HEUR and latex-HEUR-surfactant systems that utilized the same HEUR thickener and latex used in this study. In the fully-formulated system, 0.23wt% HEUR was found to be in excess of what is needed to saturate latex surfaces. This HEUR level is less than half of the level needed to saturate latex surfaces in simpler latex-HEUR systems in previous studies. Fully-formulated coatings, in addition to having TiO2 and other ingredients are more crowded than the previous systems. It appeared that a depletion flocculation mechanism dominated at low surfactant concentrations for fully-formulated systems in this study as evident from syneresis; large HEUR aggregates appear to build enough osmotic pressure to drive aggregation of latex and pigment particles resulting in depletion flocculation. At increasing surfactant levels, the depletion flocculation mechanism was negated allowing the associative HEUR bridge networks to dominate and stabilize the system. Phase stability for fully-formulated systems in this study were associated with Newtonian viscosity plateaus on flow sweeps, strain hardening on oscillatory strain sweeps, and formation of high frequency moduli plateaus in frequency sweeps. Further increase of surfactant concentration appeared to disrupt the stable latex-HEUR network due to competitive adsorption of surfactant on latex particles, resulting in syneresis from bridging flocculation. Possible correlations between phase stability and high relaxation times were seen, although further analysis of relaxation time data and simulations will need to be carried out to better understand the behavior of HEUR in fully-formulated systems.

Ce travail a été consacré au développement de nouveaux microréservoirs d'inhibiteurs de corrosion à base de ressources naturelles minérales (les argiles marocaines de types beidellite et palygorskite), et organiques (le chitosane et l'acide heptanoïque) pour être utilisés en tant que charges anticorrosion dans les peintures. Dans les réservoirs de type beidellite, le stockage des inhibiteurs de corrosion a été réalisé soit en saturant les espaces interfoliaires par des cations inhibiteurs de corrosion tels que Ca2+ ou Ce3+, soit en modifiant les charges des feuillets argileux par intercalation du biopolymère chitosane afin d'adsorber des composés anioniques comme les ions heptanoate (C7-). Dans les réservoirs de type palygorskite, le stockage est basé sur le greffage d'un alkoxysilane sur les sites silanols de surface permettant d'adsorber les composés inhibiteurs via des sites NH3+. Après avoir caractérisé les matériaux avant et après fonctionnalisation par différentes techniques analytiques, les performances d'inhibition de corrosion du zinc et d'un acier doux en milieu NaCl ont été évaluées et comparées à celles du composé commercial dihydrogénotriphosphate d'aluminium (TPA) en utilisant des techniques électrochimiques stationnaires et dynamiques. Globalement, le revêtement organique à base de la beidellite modifiée au C7- montre une meilleure protection de l'acier électrozingué que le revêtement au TPA. De même, le revêtement organique comportant la palygorskite greffée au C-7 présente une performance d'inhibition de la corrosion de l'acier doux très intéressante par rapport au revêtement au TPA, sur environ 400 h d'immersion / This work was devoted to the development of new micrometric tanks of corrosion inhibitors based on mineral natural resources (Moroccan beidellite and palygorskite clays), and organic (chitosan and heptanoic acid) to be used as corrosion inhibitor tanks in the paintings. In the reservoirs of beidellite type, the storage of corrosion inhibitors made either by saturating the interlamellar areas by corrosion inhibitors cations such as Ca2+, or Ce3+, or by modifying the electrostatic charge of clays by intercalation of chitosan biopolymer in order to adsorb anionic compounds as heptanoate ions (C7-. In palygorskite type tanks, storage is based on the grafting of an alkoxysilane on the surface silanol sites to adsorb compounds via NH3+ sites. After characterizing materials before and after functionalization by several analytical techniques, the performance of corrosion inhibitors on zinc and mild steel in NaCl medium was evaluated and compared to those of commercial compound aluminium dihydrogen triphosphate (TPA) using stationary and dynamic electrochemical techniques. Overall, the organic coating containing modified C7- beidellite shows better protection of zinc than TPA compound. Similarly, C7- grafted palygorskite coating presents a very interesting performance of corrosion inhibition of mild steel corrosion compared to the coating with TPA, during approximately 400 h of immersion

A indústria naval é uma das mais importantes para economia e desenvolvimento de um país, no entanto, as diversas atividades desenvolvidas em zonas portuárias contribuem para o impacto ambiental a ambientes costeiros, dentre os vários grupos de micropoluentes orgânicos potencialmente danosos a esses ecossistemas, emergiram nos últimos anos os biocidas anti-incrustantes. Pinturas anti-incrustantes são tratamentos utilizados para minimizar processos corrosivos, diminuindo custos com manutenção, economizando combustíveis e reduzindo a veiculação de espécies não nativas entre ecossistemas costeiros. Neste estudo foi desenvolvido, validado e aplicado um método analítico para determinação dos biocidas anti-incrustantes, clorotalonil, diuron, irgarol e tiram em amostras de água, e tecido biológico em diferentes regiões portuárias da costa brasileira e da Ilha de Gran Canaria -Espanha. / The maritime industry is an important aspect of a countries economy, however, the cumulative activities of port areas has an impact on coastal environments, this can include the addition of harmful micro-organic material. Among the potentially harmful micro-organic material being added to ecosystems, are recently emerged anti-fouling biocidal paints. Anti-fouling paints are used as a treatment to minimize corrosive processes, reduce maintenance costs, save fuel and reduce the transmission of non-native species to coastal ecosystems. This study developed, validated and applied an analytical method for the determination of the anti-fouling biocidal paints, chlorothalonil, diuron, irgarol and tiram in water samples and biological tissue in different port areas of the Brazilian coast and the Gran Canaria Island in Spain.

Submitted by PPG Engenharia e Tecnologia de Materiais (engenharia.pg.materiais@pucrs.br) on 2018-06-04T14:42:13Z No. of bitstreams: 1 DISSERTA??O FINAL - ANGELO ABEL.pdf: 2908441 bytes, checksum: 7b4f57513c25b05da3fbcc36003b7939 (MD5) / Approved for entry into archive by Sheila Dias (sheila.dias@pucrs.br) on 2018-06-11T14:34:47Z (GMT) No. of bitstreams: 1 DISSERTA??O FINAL - ANGELO ABEL.pdf: 2908441 bytes, checksum: 7b4f57513c25b05da3fbcc36003b7939 (MD5) / Made available in DSpace on 2018-06-11T14:46:48Z (GMT). No. of bitstreams: 1 DISSERTA??O FINAL - ANGELO ABEL.pdf: 2908441 bytes, checksum: 7b4f57513c25b05da3fbcc36003b7939 (MD5) Previous issue date: 2017-09-29 / Coordena??o de Aperfei?oamento de Pessoal de N?vel Superior - CAPES / In this work, the sample-flame propagation indexes were simulated in laboratory, in detriment and in comparison to the generalized burning during the fires in internal environments. The respective chemical and physical properties of the paints, the emanated gases, were compared; evidencing its toxicities, toxicological thresholds and using the tests of horizontal burning and vertical burning. In the experimental part, the paint films were produced for later burning in a quartz chamber with the use of the electric furnace, from which the gases were collected, according to each thermal degradation orientation obtained by the TGA pallet, in order to analyze the toxicities in gas chromatography. In the results the different firing behaviors for each paint can be compared by virtue of its physico-chemical composition, together with its gas release rates in each temperature range. / Neste trabalho produziu-se a partir das tintas acr?licas ? base d??gua, os ?ndices de propaga??o de chama amostral e simulada em laborat?rio, em detrimento e em comparativo ? queima generalizada durante os inc?ndios em ambientes internos. Foram comparadas as respectivas propriedades qu?micas e f?sicas das tintas, dos gases emanados; evidenciando as suas toxicidades, limiares toxicol?gicos e empregando os testes de queima horizontal e queima vertical. Na parte experimental foram produzidos os filmes de tintas, para posterior queima em c?mara de quartzo com o uso do forno el?trico, onde a partir deste, coletou-se os gases, segundo cada orienta??o de degrada??o t?rmica obtida pala TGA, para ent?o serem analisadas as toxicidades em cromatografia gasosa. Nos resultados podem ser comparados os diferentes comportamentos de queima para cada tinta em virtude de sua composi??o f?sico-qu?mica, juntamente com suas taxas de libera??es de gases em cada faixa de temperatura.