With the explosive development of wireless communication systems the specifications of the supporting hardware platforms have become more and more demanding. According to the long term goals of the industry, future communications systems should integrate a wide variety of standards. This leads to the idea of software defined radio, implemented on fully reconfigurable hardware.Among other reconfigurable hardware blocks, suitable for the software radio concept, an outstanding importance belongs to the reconfigurable filters that are responsible for the selectivity of the system. The problematic of filtering is strictly connected to the architecture chosen for a multi-mode receiver realization. According to the chosen architecture, the filters can exhibit low pass or band pass frequency responses.The idea of reconfigurable frequency parameters has been introduced since the beginning of modern filtering applications due to the required precision of the frequency response. However, the reconfiguration of the parameters was usually done in a limited range around ideal values. The purpose of the presented research is to transform the classical filter structures with simple self-correction into fully reconfigurable filters over a wide range of frequencies. The ideal variation of the frequency parameters is continuous and consequently difficult to implement in real circuits. Therefore, it is usually sufficient to use a discrete programming template with reasonably small steps.There are several methods to implement variable frequency parameters. The most often used programming templates employ resistor and capacitor arrays, switched according to a given code. The low pass filter implementation proposed in this work uses a special switching template, optimized for a quasi-linear frequency variation over logarithmic axes. The template also includes the possibility to compensate errors caused by component tolerances and temperature. Another important topic concerns the implementation of programmable band pass filters, suitable for IF sampling receivers. The discussion is centered on the feasibility and the flexibility of different band pass filter architectures. Due to the high frequency requirements, the emphasis lays on filters that employ transconductance amplifiers and capacitors. / Die rasch fortschreitende Entwicklung drahtloser Kommunikationssysteme führt zu immer anspruchsvolleren Spezifikationen der diese Systeme unterstützenden Hardwareplattformen. Zukünftige Kommunikationssysteme sollen übereinstimmend mit den längerfristigen Zielen der Industrie verschiedene Standards integrieren. Dies führt zu der Idee von vollständig rekonfigurierbarer Hardware, welche mittels Software gesteuert wird.Inmitten anderer rekonfigurierbarer Hardwareblöcke, die für das Software Radio Konzept geeignet sind, besitzen die steuerbaren Filter, welche wesentlichen Einfluss auf die Selektivität des Systems haben, eine enorme Bedeutung. Die Filterproblematik ist eng mit der gewählten Architektur der standardübergreifenden Empfängerrealisierung verknüpft. Die Filter können entsprechend der ausgesuchten Architektur Tiefpass- oder Bandpasscharakter annehmen.Die Idee rekonfigurierbarer Frequenzparameter wurde bereits mit Beginn moderner Filteranwendungen auf Grund geforderter Frequenzganggenauigkeit umgesetzt. Jedoch wurde die Parameterrekonfiguration üblicherweise nur in einem begrenzten Bereich um die Idealwerte herum vorgenommen. Das Ziel der vorgestellten Forschungsarbeit ist es, diese klassischen Filterstrukturen mit einfacher Selbstkorrektur in über große Frequenzbereiche voll rekonfigurierbare Filter zu transformieren. Idealerweise werden die Frequenzparameter kontinuierlich variiert weswegen sich die Implementierung in reellen Schaltkreisen als schwierig erweist. Deshalb ist es üblicherweise ausreichend, ein diskretes Steuerschema mit kleinen Schrittweiten zu verwenden.Es gibt verschiedene Methoden, variable Frequenzparameter zu implementieren. Die meisten Schemata verwenden Widerstands- und Kondensatorfelder, die entsprechend eines Kodes geschaltet werden. Die in dieser Arbeit vorgestellte Implementierung eines Tiefpassfilters nutzt ein spezielles Umschaltschema, welches für die quasi-lineare Frequenzvariation bei Darstellung über logarithmischen Axen optimiert wurde. Es beinhaltet weiterhin die Möglichkeit, Fehler zu kompensieren, die durch Bauelementtoleranzen und Temperaturschwankungen hervorgerufen werden.Ein weiteres interessantes Thema betrifft die Implementierung steuerbarer Bandpassfilter, die für Empfänger mit Zwischenfrequenzabtastung geeignet sind. Die Betrachtung beschränkt sich hierbei auf die Durchführbarkeit und Flexibilität verschiedener Bandpassfilterarchitekturen. Auf Grund hoher Frequenzanforderungen liegt der Schwerpunkt auf Filtern, die auf Transkonduktanzverstärkern und Kondensatoren basieren.

In South Africa, the Eastern Cape Province (ECP) has shown the lowest matriculation pass rates for most of 1994 to 2002. This has led to great academic and media focus on the managerial and leadership role of school principals, which became the inspiration for this education management study. The researcher investigated a school principal's efficiency and effectiveness in a school system, and the detrimental impact on learner academic achievement should these vital skills be lacking. Thus, the role of the school principals at schools with low matriculation pass rates was probed to reveal shortcomings in the level of their commitment, and how these could be rectified. The researcher completed a qualitative research study at four schools with low matriculation pass rates in the Eastern Cape Province. The empirical study confirmed that learners at many schools with low matriculation pass rates are subjected to poor infrastructure and overcrowding. Furthermore, the school principals did not create school atmospheres conducive to teaching and learning, and neglected to foster open communication between the school stakeholders. The study found that the school principal's management and leadership role was not based on the belief that all learners are worthy of being taught under the best possible educational conditions. The teachers are required to promote learner academic interests, made possible through efficient classroom management, to sustain teacher quality, and to ensure learner academic achievement, yet they are subjected to poor working environments and ill-disciplined learners. This study nevertheless emphasises that all school stakeholders are accountable for low matriculation pass rates, but that it is the responsibility of the school principals to institute corrective measures. It highlights that parents can enhance learner academic progress through their active involvement in their children's learning process and the provision of home environments conducive to learning. There is a need to guide school principals and school stakeholders to make every educational effort to improve the current low matriculation pass rates in the ECP. Relevant recommendations and a suggested model to rectify the situation are proposed to ensure that all learners receive the quality of education they deserve. / Faculty of Education / D.Ed. (Teacher Education)

The school effectiveness, the school's ability to deliver (produce results), and the improvement of the matriculation (Grade 12) results in the Limpopo Province has been a priority ever since the new democratic government took over in 1994. The Limpopo Province has always scored lower than all the other nine provinces in the country in the matriculation (Grade 12) results. Among the reasons given as contributing to this state of affairs, was the ineffective way of governing and administering schools. This research investigated the development of the school governing structures in the Limpopo Province. The focus was mainly on revealing the nature of the school governing structures that existed in the province and how those governing structures influenced the overall performance of the schools. The researcher found that the most suitable school governing structures for the Limpopo Province schools are those that will provide parents with more meaningful participation in the education of their children and will inculcate democracy in the governance of schools. / Educational Studies / M.Ed. (History of Education)

The purpose of this study was to explore the causes of low Grade 12 pass rate in two Umlazi District Schools, KwaZulu-Natal. It is hoped that the study would contribute to the understanding of the causes and factors of low Grade 12 pass rate and provide solutions of improving learners’ performance. This is qualitative study conducted in the area of Umbumbulu focusing on exploring the causes of low Grade 12 pass rate in two Umlazi District Schools, KwaZulu-Natal. The methodology used was qualitative. A case study method was adopted. Data was gathered through focus group interviews with two principals, twelve Grade12 learners aged between 18 and 21, and six teachers between 15 and 22 years teaching experience in secondary schools. Drawing from the findings of the interviews conducted, the study highlights the factors that have negative impact to low Grade 12 pass rate, and it revealed the possible solutions to alleviate the trend of low performance. The data reveals that there are numerous factors that affect the performance of Grade 12 learners such as poverty, child headed families, sporadic absenteeism, questionable assessment methods, overcrowded classes, lack of discipline in schools, corporal punishment, violence in schools, teenage pregnancy, curriculum reforms, lack of parental involvement, and cultural background. In this study I argue that the trend of low Grade 12 pass rate is not only limited to Umbumbulu Circuit in Umlazi District, but is the overall trend in most rural schools in South Africa. Therefore, the study recommended that all stakeholders should play their roles to overcome the crises of low Grade 12 performance. Again, it was recommended that the introduction of an advanced integrative approach in training programmes of future teachers is needed in which attention to rural -FET band schools will be considered as an integral part of the training, whereby teachers will be trained to teach inclusive education. / Inclusive Education / M. Ed. (Inclusive Education)

Le bruit rayonné par le trafic maritime étant la principale source de nuisance acoustique sous-marine dans les zones littorales, la Directive-Cadre Stratégie pour le Milieu Marin de la Commission Européenne promeut le développement de méthodes de surveillance et de réduction de l'impact du bruit du trafic maritime. Le besoin de disposer d'un système industriel d'imagerie du bruit rayonné par les navires de surface a motivé la présente étude, il permettra aux industriels du naval d'identifier quels éléments d'un navire rayonnent le plus de bruit.Dans ce contexte, ce travail de recherche porte sur la mise en place de méthodes d'imagerie acoustique sous-marine passive d'un navire de surface au passage au-dessus d'une antenne linéaire et fixe au nombre réduit d'hydrophones. Deux aspects de l'imagerie acoustique sont abordés : la localisation de sources acoustiques et l'identification de la contribution relative de chacune de ces sources dans la signature acoustique du navire.Tout d'abord, une étude bibliographique sur le rayonnement acoustique d'un navire de surface au passage est menée afin d'identifier les principales sources acoustiques et de pouvoir ensuite simuler des sources représentatives d'un navire. La propagation acoustique est simulée par la théorie des rayons et intègre le mouvement des sources. Ce simulateur de rayonnement acoustique de navire au passage est construit afin de valider les algorithmes d'imagerie acoustique proposés et de dimensionner une configuration expérimentale. Une étude sur l'influence du mouvement des sources sur les algorithmes d'imagerie acoustique a conduit à l'utilisation d'un algorithme de formation de voies pour sources mobiles pour la localisation des sources et une méthode de déconvolution pour accéder à l'identification de la contribution des sources. Les performances de ces deux méthodes sont évaluées en présence de bruit de mesure et d'incertitudes sur le modèle de propagation afin d'en connaître les limites. Une première amélioration de la méthode de formation de voies consiste en un traitement d'antenne à ouverture synthétique qui exploite le mouvement relatif entre le navire et l'antenne pour notamment améliorer la résolution en basses fréquences. Un traitement de correction acoustique de la trajectoire permet de corriger la trajectographie du navire au passage qui est souvent incertaine. Enfin, la dernière partie de cette thèse concerne une campagne de mesures de bruit de passage d'une maquette de navire de surface tractée en lac, ces mesures ont permis de valider les méthodes d'imagerie acoustique proposées ainsi que les améliorations proposées, dans un environnement réel maîtrisé. / Since the surface ship radiated noise is the main contribution to the underwater acoustic noise in coastal waters, The Marine Framework Strategy Directive of the European Commission recommends the development of the monitoring and the reduction of the impact of the traffic noise. The need for developing an industrial system for the noise mapping of the surface ship have motivated this study, it will allow the naval industries to identify which part of the ship radiates the stronger noise level.In this context, this research work deals with the development of passive noise mapping methods of a surface ship passing-by above a static linear array with a reduced number of hydrophones. Two aspects of the noise mapping are considered: the localization of acoustic sources and the identification of the relative contribution of each source to the ship acoustic signature.First, a bibliographical study concerning the acoustic radiation of a passing-by surface ship is conducted in order to list the main acoustic sources and then to simulate representative ship sources. The acoustic propagation is simulated according to the ray theory and takes the source motion into account. The simulator of the acoustic radiation of a passing-by ship is built in order to validate the proposed noise mapping methods and to design an experimental set-up. A study about the influence of the source motion on the noise mapping methods led to the use of the beamforming method for moving sources for the source localization and a deconvolution method for the identification of the source contribution. The performances of both methods are assessed considering measurement noise and uncertainties about the propagation model in order to know their limitations. A first improvement of the beamforming method consists of a passive synthetic aperture array algorithm which benefits from the relative motion between the ship and the antenna in order to improve the spatial resolution at low frequencies. Then, an algorithm is proposed to acoustically correct the trajectography mismatches of a passing-by surface ship. Finally, the last part of this thesis concerns a pass-by experiment of a towed-ship model in a lake. These measurements allowed us to validate the proposed noise mapping methods and their proposed improvements, in a real and controlled environment.

Le clinicien se trouve parfois confronté à des sujets qui présentent une surdité supérieure à 90 dB HL au-delà de 1 kHz avec une audition résiduelle dans les fréquences graves. Pour réhabiliter les hautes fréquences, il existe aujourd’hui différentes technologies : amplification conventionnelle, compression fréquentielle, implant cochléaire et depuis une dizaine d’année la stimulation électro-acoustique EAS qui consiste à stimuler acoustiquement les sons graves et électriquement les sons aigus via un implant cochléaire. La première partie de cette thèse a consisté à identifier les facteurs qui influencent les capacités des patients sourds partiels à traiter l’information basse fréquence de la parole. Nous avons utilisé un test d’audiométrie vocale filtrée passe-bas. Nos résultats indiquent que les scores d’intelligibilité de la parole sont positivement corrélés avec la durée de la surdité. Ceci signifie qu’avec le temps, ces sujets malentendants apprennent à comprendre avec cette audition type filtre passe-bas, à tel point que certains ont des performances supra-normales pour l’utilisation des basses fréquences. Nos résultats montrent également une corrélation négative entre l’âge d’apparition de la surdité et les scores l’intelligibilité. Ce test pourra aider le clinicien à mieux cibler l’appareillage le plus adapté à chaque profil de patient. La seconde partie de cette thèse, consacrée à l’EAS, a consisté à évaluer par des simulations chez le normo-entendant, diverses stratégies de codage du son par l’implant EAS. Actuellement, la stratégie utilisée pour l’EAS est calquée sur celle de l’implant cochléaire et nos résultats suggèrent que cette stratégie peut être optimisée. / Clinicians may face patients who have a deafness superior to 90 dB HL above 1 kHz with good lowfrequency residual hearing. Today, several technologies are available to provide high frequencies: conventional amplification, frequency compression, cochlear implant since about 10 years Electric-Acoustic Stimulation EAS which consists in stimulating acoustically low frequencies while stimulating electrically high frequency sounds via a cochlear implant. The firt part of this dissertation consisted in identifying the factors which may influence abilities of partially deaf subjects to process low-frequency speech information. We used a low-pass filtered speech test. Our results show that speech intelligibility scores are positively correlated to the duration of deafness. This means that these hearing-impaired subjects learn to understand with this lowpass-like hearing, in such a way that some of them exhibit supranormal abilities for the processing of low-frequency sounds. Our results also show a negative correlation between the age at onset of deafness and speech intelligibility scores. This test may help the clinician to better evaluate which device would be best for every patient’s profile. The second part of this dissertation, about EAS, consisted in evaluating through simulations in normal hearing listeners, several coding strategies by the EAS implant. Now the strategy used for EAS duplicates the strategy used by cochlear implants and our results suggest that this strategy could be optimized.

This is an exploratory study on “Evaluation of Pass-on the Gift Concept on the Socioeconomic Welfare of Rural Households: The Case of SACHZEP and ELITE Projects in Katete District, Zambia. The main research objective of the study was to evaluate the impact of the PoG concept on the socioeconomic welfare of rural households. A mixed methods approach was used involving 124 household in the survey interviews, 5 FGDs and 18 key informant interviews. Study findings showed relationships existing between type of livestock with compliance to pass on the gift (p-=0.001), food security (p=0.001), income security (p=0.007) and education at 9th grade level (p=0.002). No relationship exists between livestock type with shelter status of beneficiaries. Livestock type, water scarcity, IKS and practices, sharing of knowledge, skills and livestock affects PoG impact on socioeconomic welfare of rural households. PoG is compatible with indigenous knowledge systems and supports Human Centred Development approach. / Development Studies / M.A. (Development Studies)

Cryo-electron microscopy (cryo-EM) has been established as the leading imaging technique for structural studies from small proteins to whole cells at a molecular level. The great advances in cryo-EM have led to the ability to provide unique insights into a wide variety of biological processes in a close to native, hydrated state at near-atomic resolutions. The developments of computational approaches have significantly contributed to the exciting achievements of cryo-EM. This dissertation emphasizes new approaches to address image processing problems in cryo-EM, including tilt series alignment evaluation, simultaneous determination of sample thickness, tilt, and electron mean free path based on Beer-Lambert law, Model-Based Iterative Reconstruction (MBIR) on tomographic data, minimization of objective lens astigmatism in instrument alignment and defocus and magnification dependent astigmatism of TEM images. The final goal of these methodological developments is to improve the 3D reconstruction of cryo-EM and visualize more detailed characterization.

This doctoral thesis is focused on the possibilities of alkali-activated slag (AAS) shrinkage reduction, which would together with the use of waste sludge from waterglass production contribute to wider practical utilization of this interesting material. Besides the influence on AAS dimensional changes also effect of various factors on workability, setting time and mechanical properties was investigated. Obtained results were supported by the application of instrumental techniques like izotermal calorimetry, mercury intrusion porosimetry, scanning electron microscopy and X-ray diffraction. The results show the possibilities of reduction of AAS drying shrinkage related to its cracking tendency through the combination of increased dose of waterglass and reduced water to slag ratio (w/b), partial replacement of slag by pulverized fly ash or cement by-pass dust and application of organic admixtures, where significant effect on AAS hydration was observed. On the basis of the obtained results concrete mixtures, where the whole activator was replaced by the waste sludge form waterglass production, were designed and optimized in terms of shrinkage, mechanical properties and price. Selected concretes were also tested in semi-operating conditions.

The aim of master's thesis is to get familiarized with the problems of measurement and analysis of seismic waves. Theoretical part deals with the description of seismic waves, especially their types, sources and properties. Attention was afterwards focused on the measurement systems of these waves, emphasis was placed on their principles and advantages. The practical part discusses methods of noise reduction and highlighting of significant events in measured data. At the end, individual methods are implemented into user-friendly graphical interface.