201 |
A full-engulfment engineering model, and its experimental and numerical verification, for the response of a rigid body to ground-shockWelch, Charles Robert 19 September 2008 (has links)
In this study, a new engineering model is presented which treats the motions of a rigid body to ground shock. A rigid body is defined as one whose deformations are small compared to the deformations of the surrounding media. The new model treats non-planar normal loads on the structure, tensile cut-off constraints at the upstream and downstream faces of the structure, and shear forces on the lateral surfaces of the structure. It assumes linear elastic material properties for all materials, and collinearity between reflected and transmitted particle velocities and stresses. An important feature of the model is that it incorporates the effects of wave diffraction around the rigid body through simple bounding arguments on the conditions which prevail in the shadow zone of the structure at early-times, intermediate-times, and late-times after the wave has engulfed the rigid body. The resulting expressions are uncomplicated, and provide bounds on the structure’s motion. The model was tested against a series of linear elastic finite element calculations and was found to be accurate, and able to explain the velocity overshoot which, while not widely known, accompanies the motions of rigid bodies under certain circumstances. The model was also tested against the results of a high-explosive test in sand, and a high explosive test in a competent shale, by treating the ground motion instrument canisters on the tests as rigid bodies. Again the model was found to be accurate, and accounted for the differences observed between finite difference predictions of the flow fields and the measured canisters’ responses. The model is expected to find application in aiding in the interpretation of ground motion measurements from explosion tests, in the design of ground motion transducers, and as an aid in the vulnerability analysis of underground Structures to the effects from large explosions. / Ph. D.
|
202 |
Some Assembly Required: The Structural Condition of Collage in Architecture and UrbanismMartin, J. Garrett 28 March 1997 (has links)
It is my intention through this thesis to investigate the structural condition of collage as a culturally relevant approach to understanding architectural meaning and designing architectural form within the context of the urban environment. Meaning in architecture, as it emerges both implicitly and explicitly within the framework of this condition, will be analyzed as it relates to contemporary cultural and historical conditions.
In terms of process and product, collage is construed with meaning through juxtaposition and context. A collage does not convey an essential meaning, as its meaning arises through the deliberate techne - the act of its making, and not through reflection on any pre-existing qualities, as there are none. The whole of a collage does not merely encompass an accumulation of elements, but embraces a greater totality through a fragmentary synthesis. While synthesis denotes a constructive process, it also signifies a dialectic relation. The dialectic relation embodied in collage can be understood in terms of inclusivity and exclusivity of meaning.
This thesis investigation originates from the premise that the architectural act can never be fully understood in terms of its architecture alone. To ignore the greater social, cultural, and historical framework that sustains both the maker and the made is to deny architecture its full depth of meaning, whether that meaning is ideological, transparent, or bound within a chain of signifiers. This is not to imply that the social deterministically constitutes architecture, as both undoubtedly reciprocate influence upon one another; the maker and the made leave their indelible impression upon the sphere of relations which surrounds them. However, it is ultimately within this sphere - this larger social context - that an architectural form embodies meaning. / Master of Architecture
|
203 |
Near-trapping effect of wave-cylinders interaction on pore water pressure and liquefaction around a cylinder arrayLin, Z., Pokrajac, D., Guo, Yakun, Liao, C., Tang, T. 10 October 2021 (has links)
Yes / The near-trapping effects on wave-induced dynamic seabed response and liquefaction close to a multi-cylinder foundation in storm wave conditions are examined. Momentary liquefaction near multi-cylinder structures is simulated using an integrated wave-structure-seabed interaction model. The proposed model is firstly validated for the case of interaction of wave and a four-cylinder structure, with a good agreement with available experimental measurements. The validated model is then applied to investigate the seabed response around a four-cylinder structure at 0° and 45° incident angles. The comparison of liquefaction potential around individual cylinders in an array shows that downstream cylinder is well protected from liquefaction by upstream cylinders. For a range of incident wave parameters, the comparison with the results for a single pile shows the amplification of pressure within the seabed induced by progressive wave. This phenomenon is similar to the near-trapping phenomenon of free surface elevation within a cylinder array. / Energy Technology Partnership (ETP), Wood Group / Full-text of this article will be released for public view at the end of the publisher embargo on 10 Oct 2021.
|
204 |
Two-dimensional turbulent burst examination and angle ratio utilization to detect scouring/sedimentation around mid-channel barKhan, M.A., Sharma, N., Pu, Jaan H., Aamir, M., Pandey, M. 18 May 2021 (has links)
yes / River morphological dynamics are complex phenomena in natural and environmental flows. In particular,
the sediment transport around braid mid-channel bars has not gained enough understanding from previous research. The effect of submergence ratio on the turbulence behavior in the proximity of the bar has been investigated in this study. The spatial distribution of turbulent flow in the proximity of bar has been studied by plotting the depth-averaged two-dimensional contours of turbulent kinetic energy. The high value of TKE has been observed in regions just downstream from the bar. It is due to the vortex shedding occurring in that region. The interaction of sweep and ejection events have been analyzed using the parameter Dominance Function obtained from the ratio of occurrence probability of ejection events to the occurrence probability of sweep events. This outcome indicates that the depth averaged parameter Dominance Function has successfully predicted the high scouring region which makes it an ideal parameter for analyzing the scour phenomena in real-world water management projects. The high scouring zone lies in the close proximity of the bar. This shows that the scouring effect from the bar is limited to its close region. The magnitude of scouring occurring at the upstream region of the bar also increases with the
increment of submergence ratio. The relationship of quadrant event inclination angles with the sediment
transport occurring in the proximity of bar has been also studied, where an Angle Ratio parameter has been utilized for linking the bed elevation change with the inclination angle. The results indicate that the AR parameter has been successfully tested in this study to show its competence to represent the turbulent burst-induced bed sedimentation and scouring. / The author has confirmed that no changes were made to the content of this proof on publication, although the paper is watermarked uncorrected proof.
|
205 |
On the Convergence to Uniformity of a Random Walk on SU(N)Hoti, Rilind, Lundqvist, Viktor January 2024 (has links)
We study a random walk on the special unitary group SU(N) consisting of a product of matrices chosen Haar uniformly from a fixed conjugacy class. In particular, we make use of the representation theory of matrix Lie groups to show two results about the rate of convergence of the random walk's distribution to the Haar measure in total variation distance. We derive a lower bound in total variation distance before a threshold number of steps, which appears to be an example of a cut-off phenomenon, and for dimension N=2 we prove exponentially fast convergence.
|
206 |
Sweet and savage: the world through the mondo film lensGoodall, Mark 02 1900 (has links)
No / Being the first ever English-language title devoted exclusively to the controversial and influential mondo documentary film cycle, this revised edition of Sweet and Savage remains the only serious study of mondo as a global film phenomenon, and includes a detailed examination of the key films of this cult genre.
Sweet and Savage identifies the principle stylistic aspects of the mondo genre through a fascinating ‘non-linear’ approach that echoes the collage shock effects of the original films. In so doing it features exclusive interviews and many unique material contributions. It is lavishly illustrated with rare photographs, stills, posters, and record sleeves.
|
207 |
Bimodal Gate Oxide Breakdown in Sub-100 nm CMOS TechnologyRezaee, Leila 08 December 2008 (has links)
In the last three decades, the electronic industry has registered a tremendous progress. The continuous and aggressive downsizing of the transistor feature sizes (CMOS scaling) has been the main driver of the astonishing growth and advancement of microelectronic industry. Currently, the CMOS scaling is almost reaching its limits. The gate oxide is now only a few atomic layers thick, and this extremely thin oxide causes a huge leakage current through the oxide. Therefore, a further reduction of the gate oxide thickness is extremely difficult and new materials with higher dielectric constant are being explored. However, the phenomena of oxide breakdown and reliability are still serious issues in these thin oxides. Oxide breakdown exhibits a soft breakdown behavior at low voltages, and this is posing as one of the most crucial reliability issues for scaling of the ultra-thin oxides. In addition, the stress-induced leakage current (SILC) due to oxide has emerged as a scaling problem for the non-volatile memory technologies.
In this dissertation, a percolation modeling approach is introduced to study and understand the dramatic changes in the conductivity of a disordered medium. Two different simulation methods of percolative conduction, the site and bond percolation, are studied here. These are used in simulating the post-breakdown conduction inside the oxide. Adopting a Monte-Carlo method, oxide breakdown is modeled using a 2-D percolation theory. The breakdown statistics and post-breakdown characteristics of the oxide are computed using this model. In this work, the effects of different physical parameters, such as dimension and the applied stress are studied. The simulation results show that a thinning of oxide layer and increasing the oxide area result in softening of breakdown. It is observed that the breakdown statistics appear to follow Weibull characteristics. As revealed by simulations, the Weibull slope changes linearly with oxide thickness, while not having a significant change when the area is varied and when the amount of the applied stress is varied. It is shown that the simulation results are well correlated with the experimental data reported in the literature.
In this thesis, studying the conduction through the oxide using percolation model, it was discovered that a critical or a quasi-critical phenomenon occurs depending on the oxide dimensions. The criticality of the phase-transition results in a hard breakdown while the soft breakdown occurs due to a quasi-critical nature of percolation for ultra-thin oxides.
In the later part of the thesis, a quantum percolation model is studied in order to explain and model the stress induced leakage current. It is explained that due to the wave nature of electrons, the SILC can be modeled as a tunneling path through the stressed oxide with the smaller tunneling threshold compared to the virgin oxide.
In addition to the percolation model, a Markov chain theory is introduced to simulate the movement of electron as a random walk inside the oxide, and the breakdown is simulated using this random-walk of electron through the accumulated traps inside the oxide. It is shown that the trapping-detrapping of electrons results in an electrical noise in the post-breakdown current having 1/f noise characteristics. Using simulation of a resistor network with Markov theory, the conductance of the oxide is computed.
An analytical study of a 2-D site percolation system is conducted using recursive methods and useful closed-form expressions are derived for specialized networks.
|
208 |
Bimodal Gate Oxide Breakdown in Sub-100 nm CMOS TechnologyRezaee, Leila 08 December 2008 (has links)
In the last three decades, the electronic industry has registered a tremendous progress. The continuous and aggressive downsizing of the transistor feature sizes (CMOS scaling) has been the main driver of the astonishing growth and advancement of microelectronic industry. Currently, the CMOS scaling is almost reaching its limits. The gate oxide is now only a few atomic layers thick, and this extremely thin oxide causes a huge leakage current through the oxide. Therefore, a further reduction of the gate oxide thickness is extremely difficult and new materials with higher dielectric constant are being explored. However, the phenomena of oxide breakdown and reliability are still serious issues in these thin oxides. Oxide breakdown exhibits a soft breakdown behavior at low voltages, and this is posing as one of the most crucial reliability issues for scaling of the ultra-thin oxides. In addition, the stress-induced leakage current (SILC) due to oxide has emerged as a scaling problem for the non-volatile memory technologies.
In this dissertation, a percolation modeling approach is introduced to study and understand the dramatic changes in the conductivity of a disordered medium. Two different simulation methods of percolative conduction, the site and bond percolation, are studied here. These are used in simulating the post-breakdown conduction inside the oxide. Adopting a Monte-Carlo method, oxide breakdown is modeled using a 2-D percolation theory. The breakdown statistics and post-breakdown characteristics of the oxide are computed using this model. In this work, the effects of different physical parameters, such as dimension and the applied stress are studied. The simulation results show that a thinning of oxide layer and increasing the oxide area result in softening of breakdown. It is observed that the breakdown statistics appear to follow Weibull characteristics. As revealed by simulations, the Weibull slope changes linearly with oxide thickness, while not having a significant change when the area is varied and when the amount of the applied stress is varied. It is shown that the simulation results are well correlated with the experimental data reported in the literature.
In this thesis, studying the conduction through the oxide using percolation model, it was discovered that a critical or a quasi-critical phenomenon occurs depending on the oxide dimensions. The criticality of the phase-transition results in a hard breakdown while the soft breakdown occurs due to a quasi-critical nature of percolation for ultra-thin oxides.
In the later part of the thesis, a quantum percolation model is studied in order to explain and model the stress induced leakage current. It is explained that due to the wave nature of electrons, the SILC can be modeled as a tunneling path through the stressed oxide with the smaller tunneling threshold compared to the virgin oxide.
In addition to the percolation model, a Markov chain theory is introduced to simulate the movement of electron as a random walk inside the oxide, and the breakdown is simulated using this random-walk of electron through the accumulated traps inside the oxide. It is shown that the trapping-detrapping of electrons results in an electrical noise in the post-breakdown current having 1/f noise characteristics. Using simulation of a resistor network with Markov theory, the conductance of the oxide is computed.
An analytical study of a 2-D site percolation system is conducted using recursive methods and useful closed-form expressions are derived for specialized networks.
|
209 |
Exponential asymptotics in unsteady and three-dimensional flowsLustri, Christopher Jessu January 2013 (has links)
The behaviour of free-surface gravity waves on small Froude number fluid flow past some obstacle cannot be determined using ordinary asymptotic power series methods, as the amplitude of the waves is exponentially small. An exponential asymptotic method is used by Chapman and Vanden-Broeck (2006) to consider the problem of two-dimensional, steady flow past a submerged obstacle in the small Froude number limit, finding that a steady downstream wavetrainis switched on rapidly across a curve known as a Stokes line. Here, equivalent wavetrains on three-dimensional and unsteady flow configurations are considered, and Stokes switching causedby the interaction between exponentially small free-surface components is shown to play an important role in both cases. The behaviour of free-surface gravity waves is introduced by considering the problem of steady free-surface flow due to a line source. A steady wavetrain is shown to exist in the far field, and the behaviour of these waves is compared to existing numerical results. The problem of unsteady flow over a step is subsequently investigated, with the flow behaviour formulated in terms of Lagrangian coordinates so that the position of the free surface is fixed. Initially, the problem is linearized in the step-height, and the steady wavetrain is shown to spread downstream over time. The position of the wavefront is determined by considering the full Stokes structure present in the problem. The equivalent fully-nonlinear problem is then considered, with the position of the Stokes lines, and hence the wavefront, being determined numerically. Finally, linearized three-dimensional free-surface flow past an obstacle is considered in both the steady and unsteady case. The surface is shown to contain downstream longitudinal and transverse waves. These waves are shown to propagate downstream in the unsteady case, with the position of the wavefront again determined by considering the full Stokes structure of the problem.
|
210 |
The impact of the impostor phenomenon on the math self-efficacy of males and females in STEM majorsBlondeau, Lauren Alexandra 18 September 2014 (has links)
In the undergraduate and working environments, some science, technology, engineering, and math (STEM) areas remain dominated by males. The purpose of this study was to understand the gendered experience of individuals in STEM majors by assessing students’ math self-efficacy, impostorism (a feeling of intellectual phoniness), and future goals. Based on prior research, an overall conceptual model was proposed and analyzed. Several related precursors including gender role orientation, perceived parental influence, math identity, and theories of intelligence were included in the model. Three hundred six undergraduates (64.38% female) in the colleges of natural science, geosciences, and engineering responded to an online survey addressing these constructs. Based on prior research, hypotheses were created proposing that females would report higher impostorism, lower math self-efficacy, and more femininity than males. I expected that masculinity, perceived parental influence, an entity theory of intelligence, and high math identity would predict the impostor phenomenon. Moreover, I hypothesized that the relation of each of these predictors to impostorism would be moderated by sex. For the next two hypotheses, I proposed that the four sources of math self-efficacy would predict math self-efficacy, but this relation would be moderated by impostorism. Finally, I expected that impostorism would lead to reduced future expectations and aspirations, but that this association would be mediated by math self-efficacy. Results indicated partial support of the study hypotheses, and a revised model was created. Both sexes reported similar levels of impostorism, but females had lower math self-efficacy and greater femininity than males. Masculinity negatively predicted the impostor phenomenon, while math identity and an entity theory of intelligence positively related to the dependent variable. Sex moderated the effect of perceived parental influence such that males’ impostorism was more affected by parental influence than females’. Emotional arousal was a strong contributor to math self-efficacy, but this relation was attenuated by impostorism. Coping with emotional arousal was positively associated with math self-efficacy; however, this association was significantly stronger for low impostors than high ones. Finally, impostors were less likely to expect to go to graduate school or work in a STEM-related field. Implications for schools and professors are discussed. / text
|
Page generated in 0.0981 seconds