Activated carbons as emerging classes of porous materials have gained tremendous attention because of their versatile applications such as gas storage/separations sorbents, oxygen reduction reaction (ORR) catalysts and supercapacitor electrodes. This diversity originates from fascinating features such as low-cost, lightweight, thermal, chemical and physical stability as well as adjustable textural properties. More interestingly, sole heteroatom or combinations of various elements can be doped into their framework to modify the surface chemistry. Among all dopants, nitrogen as the most frequently used element, induces basicity and charge delocalization into the carbon network and enhances selective adsorption of CO2. Transformation of a task-specific and single source precursor to heteroatom-doped carbon through a one-step activation process is considered a novel and efficient strategy. With these considerations in mind, we developed multiple series of heteroatom doped porous carbons by using nitrogen containing carbon precursors. Benzimidazole-linked polymers (BILP-5), benzimidazole monomer (BI) and azo-linked polymers (ALP-6) were successfully transformed into heteroatom-doped carbons through chemical activation by potassium hydroxide. Alternative activation by zinc chloride and direct heating was also applied to ALP-6. The controlled activation/carbonization process afforded diverse textural properties, adjustable heteroatom doping levels and remarkable gas sorption properties. Nitrogen isotherms at 77 K revealed that micropores dominate the porous structure of carbons. The highest Brunauer-Emett-Teller (BET) surface area (4171 m2 g-1) and pore volume (2.3 cm3 g-1) were obtained for carbon synthesized by KOH activation of BI at 700 °C. In light of the synergistic effect of basic heteroatoms and fine micropores, all carbons exhibit remarkable gas capture and selectivity. Particularly, BI and BIPL-5 derived carbons feature unprecedented CO2 uptakes of 6.2 mmol g-1 (1 bar) and 2.1 mmol g-1 (0.15 bar) at 298 K, respectively. The ALP-6 derived carbons retained considerable amount of nitrogen dopants (up to 14.4 wt%) after heat treatment owing to the presence of more stable nitrogen-nitrogen bonds compared to nitrogen-carbon bonds in BILP-5 and BI precursors. Subsequently, the highest selectivity of 62 for CO2/N2 and 11 for CO2/CH4 were obtained at 298 K for a carbon prepared by KOH activation of ALP-6 at 500 °C.

京都大学 / 0048 / 新制・課程博士 / 博士(工学) / 甲第21125号 / 工博第4489号 / 新制||工||1698(附属図書館) / 京都大学大学院工学研究科合成・生物化学専攻 / (主査)教授 杉野目 道紀, 教授 吉田 潤一, 教授 松田 建児 / 学位規則第4条第1項該当 / Doctor of Philosophy (Engineering) / Kyoto University / DGAM

Adsorption is a versatile purification technique to selectively separate different peptide fractions from a mixture using mild operation conditions. Porous carbons are ideally suited to separate ACE-inhibiting dipeptides by combining tailored size exclusion and polarity selectivity. The desired peptide fraction is mostly hydrophobic and very small and should adsorb inside hydrophobic micropores. The second topic of this thesis is linked to energy storage. The lithium-sulfur battery is a promising alternative to common lithium-ion batteries with theoretical capacities of up to 1672 mAh g−1 sulfur. The second aim of this thesis is to conduct an in-depth investigation of polysulfides interacting with selected carbon materials in a simplified battery electrolyte environment. The focus of this study is laid on the impact of surface polarity and pore size distribution of the carbon to develop a quantitative correlation between polysulfide retention and porosity metrics. Both, the enrichment of ACE-inhibitors and the retention of polysulfides rely on liquid phase adsorption in porous materials, linking the above mentioned topics. This thesis not only aims to develop an enrichment process or to find a superior battery cathode but also strives to explore structure-property relationships that are universally valid. Understanding the complex interplay of pore size and polarity leading to selective interactions between pore wall and the adsorbed species is given a high priority.

Nitrogen-doped (N-doped) porous carbons have drawn increasing attention due to their high activity for electrochemical catalysis, and high capacity for lithium-ion (Li-ion) batteries and supercapacitors. So far, the controlled synthesis of N-enriched ordered mesoporous carbons (N-OMCs) for Li-ion batteries is rarely reported due to the lack of a reliable nitrogen-doping protocol that maintains the ordered mesoporous structure. In order to realize this, in this work, ordered mesoporous carbons with controllable N contents were successfully prepared by using melamine, F127 and phenolic resin as the N-source, template and carbon-source respectively via a solvent-free ball-milling method. The as-prepared N-OMCs which showed a high N content up to 31.7 wt% were used as anodes for Li-ion batteries. Remarkably, the N-OMCs with an N content of 24.4 wt% exhibit the highest reversible capacity (506 mA h g−1) even after 300 cycles at 300 mA g−1 and a capacity retention of 103.3%. N-OMCs were also used as electrode materials in supercapacitors and a capacity of 150 F g−1 at 0.2 A g−1 with stable cycling up to 2500 times at 1 A g−1 was achieved. These attractive results encourage the design and synthesis of high heteroatom content ordered porous carbons for applications in the field of energy storage and conversion.

No description available.

No description available.

Ce travail de recherche présente la préparation et la caractérisation de matériaux monolithiques hautement poreux dérivés majoritairement de ressources naturelles. L'objectif était de préparer de nouveaux gels biosourcés jusqu'à 91%, de proposer des alternatives au séchage supercritique au CO2, et d'étudier quelques propriétés d'intérêt de tels gels après séchage, non seulement à l'état organique mais, dans certains cas, après pyrolyse pour obtenir des gels de carbone. A ces fins, le tannin et le soja ont été testés comme précurseurs, à différentes concentrations et différents pH, et trois voies de séchages ont été utilisées : supercritique, lyophilisation et séchage évaporatif. Les gels obtenus ont été caractérisés en termes de densité, porosité, distributions de tailles de pores et surfaces spécifiques, qu'ils soient sous forme organique ou carbonée selon l'application envisagée ou le type de porosité attendue. Leurs propriétés mécaniques et thermiques ont aussi été mesurées. La très large gamme de textures poreuses obtenues a permis de proposer des applications en tant qu'isolants thermiques, supports de catalyseur, ou électrodes de condensateur électrochimiques, selon les cas / This manuscript presents the preparation and the characterization of highly porous monolithic materials mainly derived from natural resources. The objectives were to: (i) develop new gels, biosourced up to the 91% level; (ii) suggest alternatives to supercritical drying in CO2, and (iii) investigate properties of interest for such gels in the organic state and, in some cases, after pyrolysis for obtaining carbon gels. For those purposes, tannin and soy flour were tested as precursors, at different concentrations and different pH, and three ways of drying were used: supercritical drying, freeze drying and evaporative drying. The obtained gels were characterized in terms of density, porosity, pore size distributions and specific surface area, whether in organic or in carbon form, depending on the intended application or expected type of porosity. Mechanical and thermal properties were also measured. The obtained broad range of porous textures allowed suggesting applications such as thermal insulators, catalyst supports or electrodes for electrochemical capacitors

Nitrogen-doped (N-doped) porous carbons have drawn increasing attention due to their high activity for electrochemical catalysis, and high capacity for lithium-ion (Li-ion) batteries and supercapacitors. So far, the controlled synthesis of N-enriched ordered mesoporous carbons (N-OMCs) for Li-ion batteries is rarely reported due to the lack of a reliable nitrogen-doping protocol that maintains the ordered mesoporous structure. In order to realize this, in this work, ordered mesoporous carbons with controllable N contents were successfully prepared by using melamine, F127 and phenolic resin as the N-source, template and carbon-source respectively via a solvent-free ball-milling method. The as-prepared N-OMCs which showed a high N content up to 31.7 wt% were used as anodes for Li-ion batteries. Remarkably, the N-OMCs with an N content of 24.4 wt% exhibit the highest reversible capacity (506 mA h g−1) even after 300 cycles at 300 mA g−1 and a capacity retention of 103.3%. N-OMCs were also used as electrode materials in supercapacitors and a capacity of 150 F g−1 at 0.2 A g−1 with stable cycling up to 2500 times at 1 A g−1 was achieved. These attractive results encourage the design and synthesis of high heteroatom content ordered porous carbons for applications in the field of energy storage and conversion.

Adsorption is a versatile purification technique to selectively separate different peptide fractions from a mixture using mild operation conditions. Porous carbons are ideally suited to separate ACE-inhibiting dipeptides by combining tailored size exclusion and polarity selectivity. The desired peptide fraction is mostly hydrophobic and very small and should adsorb inside hydrophobic micropores. The second topic of this thesis is linked to energy storage. The lithium-sulfur battery is a promising alternative to common lithium-ion batteries with theoretical capacities of up to 1672 mAh g−1 sulfur. The second aim of this thesis is to conduct an in-depth investigation of polysulfides interacting with selected carbon materials in a simplified battery electrolyte environment. The focus of this study is laid on the impact of surface polarity and pore size distribution of the carbon to develop a quantitative correlation between polysulfide retention and porosity metrics. Both, the enrichment of ACE-inhibitors and the retention of polysulfides rely on liquid phase adsorption in porous materials, linking the above mentioned topics. This thesis not only aims to develop an enrichment process or to find a superior battery cathode but also strives to explore structure-property relationships that are universally valid. Understanding the complex interplay of pore size and polarity leading to selective interactions between pore wall and the adsorbed species is given a high priority.

Nous avons étudié la chimie de surface de carbones poreux fonctionnalisés avec des oximes et amidoximes d’une part, et avec de la guanidine d’autre part. Nous avons axé ces travaux sur la compréhension et la quantification de ces fonctionnalisations par analyse thermique et plus particulièrement par thermo-désorption programmée en température couplée à la spectroscopie de masse (TPD-MS). Par la suite, nous avons évalué l’intérêt de la fonctionnalisation par la guanidine des carbones mésoporeux pour deux applications : le piégeage du CO2 et la capacité à synthétiser et stabiliser des nanoparticules métallique. Pour la première application, des tests d’adsorption du CO2 à 0°C et 20°C à 1 bar ont été réalisés sur un carbone mésoporeux oxydé sous air en présence ou non de guanidine. L’intensité des interactions (physisorption versus chimisorption) a été sondée par des calculs de chaleurs isostériques d’adsorption. Pour la seconde applications, nous avons utilisé des carbones mésoporeux oxydés en présence ou non de guanidine pour synthétiser des nanoparticules d’argent de taille inférieure à 2 nm et relativement monodisperses en taille. Des particules bimétalliques d’AgCu ont également été obtenues au sein de ces matrices carbonées mésoporeuses imprégnées par la guanidine. On a pu mettre ici en évidence un rôle bénéfique de la guanidine sur le taux de cuivre réduit. Des suivis thermiques par MET in situ ont également été réalisés afin d’évaluer la stabilité thermique de ces nanoparticules et de mieux appréhender l’intérêt de la fonctionnalisation sur les phénomènes de frittage de ces nanoparticules. Finalement, des tests catalytiques pour l’époxydation sélective du styrène ont aussi été effectués sur le matériau Ag/C. Les résultats préliminaires sont très prometteurs pour un procédé de préparation de catalyseur très simple à mettre en œuvre. / In this work, we studied the surface chemistry of porous carbons functionalized firstly with oximes and amidoximes and then with guanidine. We focused this work on the understanding and quantification of these functionalization with thermal analysis and more particularly by Temperature Programmed Desorption/Mass Spectrometry (TPD-MS). Subsequently, we evaluated the interest of guanidine functionalization of mesoporous carbons for two applications : the capture of CO2 and the ability to synthesize and stabilize metal nanoparticles. For the first application, CO2 adsorption tests at 0 ° C. and 20 ° C. at 1 bar were carried out on a mesoporous carbon oxidized under air in the presence or absence of guanidine. The intensity of interactions (physisorption versus chemisorption) was probed by isosteric adsorption heat calculations. For the second applications, we used oxidized mesoporous carbons with or without guanidine to synthesize silver nanoparticles less than 2 nm in size and relatively monodisperse in size. Bimetallic AgCu particles were also obtained from these mesoporous carbon matrices impregnated with guanidine. A beneficial role of guanidine on the reduced copper content has been shown here. In situ TEM has also been carried out in order to evaluate the thermal stability of these nanoparticles and to understand the interest of the functionalization on the sintering of these nanoparticles. Finally, catalytic tests for the selective epoxidation of styrene were also performed on these materials. The preliminary results are very promising for a catalyst preparation process and very simple to implement.