This thesis describes the on-road analysis of criteria air pollutants (CAPs) and volatile organic compounds (VOCs) from a moving vehicle. CAPs and VOCs have numerous direct and indirect effects on the environment and public health and are generated from a variety of point and diffuse sources. The concentration of these pollutants can vary on the scale of metres and seconds due to variable emission rates of sources, meteorology, and the topography of an area. CAPs are conventionally measured on a spatial scale of tens of kilometres and one hour or longer time resolution, which limits the understanding of their impact and leaving many communities lacking information regarding their air quality. VOCs are not measured as frequently as CAPs, owing to the difficulty, challenges, and cost associated with sampling. The Mobile Mass Spectrometry Lab (MMSL) was developed to collect high geospatial (15 – 1,500 m) and temporal (1 – 10 s) resolution measurements of CAPs (O3, NOx, PM2.5), CO2, CH4, and VOCs. CAPs and greenhouse gases were monitored using standard analyzers, while VOCs were measured using a proton-transfer reaction time-of-flight mass spectrometer (PTR-MS). PTR-MS is a real-time, direct, in situ technique that can monitor VOCs in the ambient atmosphere without sample collection. The PTR-MS monitored up to mass-to-charge 330 with a sample integration time of 1 or 10 seconds and had detection limits into the low- to mid-ppt. PTR-MS is a soft ionization technique that is selective to all compounds with a proton affinity less than water, which excludes the atmospheric matrix and includes most VOCs. The measurements provided by the PTR-MS provided a rich dataset for which to develop workflow and processing methods alongside sampling strategies for the collection of high geospatial and temporal VOC data. The first on-road deployment of the MMSL was performed across the Regional District of Nanaimo and the Alberni-Clayoquot Regional District in British Columbia, Canada, from July iv 2018 – April 2019 to monitor the geospatial and temporal variation in the concentration of CAPs and VOCs. VOCs detected in the areas include hydrocarbons like toluene, C2-benzenes, and terpenes, organic acids like acetic acid, oxygenated compounds like acetone and acetaldehyde, and reduced sulfur compounds like methanethiol and dimethyl sulfide. While observed concentrations of VOCs were mostly below detection limits, concentration excursions upwards of 2,200 ppb for C2-benzenes (reported as ethylbenzene) for instance, were observed across the various communities and industries that comprise central Vancouver Island. VOCs like monoterpenes, were observed near the wood industries up to 229 ppb. Combustion related VOCs, like toluene and C2-benzenes, were often observed on major transportation corridors and was found to vary significantly between seasons, with winter measurements often exceeding those made in the summer. Reduced sulfur compounds, common components of nuisance odours, were measured around a few industries like waste management and wood industries. The second on-road deployment of the MMSL focused on the analysis of VOCs in the community around a wastewater treatment plant (WWTP) to identify the source of odours in the area. VOCs were also monitored in the odour control process of the WWTP to identify the VOCs being emitted, how much were emitted, and where potential deficiencies were in the process in a unique study. Median emission rates at the facility for methanethiol, dimethyl sulfide, and dimethyl disulfide were determined to be 100, 19, and 21 kg yr-1, respectively. VOC monitoring in the community encompassed the WWTP and the other major industries in the area, including agricultural land, a composting facility, and a marina. The highest measurements of odorous reduced sulfur compounds were observed around the WWTP, upwards of 36 ppb for methanethiol. Unsupervised multivariate analysis was performed to identify groups of VOCs present and their potential sources. Three groups were identified, one of which was related to reduced sulfur compounds. This group was observed around the WWTP, indicating that the WWTP was the likely source of malodours in the community. / Graduate

No description available.

La nature des acides dans un environnement aqueux est primordiale dans de nombreux aspects de la chimie et de la biologie. La caractéristique principale d'un acide est sa capacité à transférer un proton vers une molécule d'eau ou vers n'importe quelle base, mais ce procédé n'est pas aussi simple qu'il y paraît. Il peut au contraire être extrêmement complexe et dépendre de manière cruciale de la solvatation des différents intermédiaires de réaction impliqués. Cette thèse décrit les études computationnelles basées sur des simulations de dynamique moléculaire ab initio qui ont pour but d'obtenir une description à l'échelle moléculaire des divers procédés de transferts de proton entre acide et bases dans un milieu aqueux. Pour cela, nous avons étudié une serie de système, dont l'acide hydrofluorique aqueux, l'acide trifluoroacétique aqueux, et un système modèle constitué d'un phénol et d'une entité carboxylate reliés entre eux par une molécule d'eau en solution aqueuse. Deux états intermédiaires ont été identifiés pour le transfert d'un proton depuis un acide. Ces intermédiaires apparaissent stabilisés par un motif local de solvatation via des ponts H. Leurs signatures spectroscopiques ont été caractérisées au moyen de la spectroscopie infrarouge, en utilisant le formalisme de la dynamique moléculaire ab initio, qui inclut l'effet quantique nucléaire de manière explicite. Cette étude a aussi identifié trois chemins de réaction élémentaire, qui sont responsable pour le transfert d'un proton d'un acide à une base, ainsi que leurs échelles de temps caractéristiques. Les conclusions tirées de ces études sont discutées dans les détails, au niveau moléculaire, avec une emphase sur les comparaisons entre les résultats théoriques et les mesures expérimentales obtenues dans a littérature ou via des collaborateurs. / The nature of acids in an aqueous environment is fundamental to many aspects of chemistry and biology. The defining feature of an acid is its ability to transfer a proton to water or to any accepting base, but this seemingly simple process can be complex and highly dependent on the solvation involving different reaction intermediate species. This thesis describes computational studies based on first principles molecular dynamics simulations aimed at obtaining molecular-level descriptions of diverse proton transfer process involving acids and bases in liquid water. For that, we have investigated a variety of systems including aqueous hydrofluoric acid, aqueous trifluoroacetic acid and a model system comprising of a phenol and a carboxyate molecule bridged by a water molecule in aqueous solution. Two different intermediate stages of proton transfer from an acid were identified which are found to be stabilized by distinct local H-bond solvation pattern. Their spectroscopic signatures were characterized using infrared spectroscopy computed from first principles molecular dynamics simulations which incorporate nuclear quantum effects explicitly. This study also identified three elementary reaction pathways that are responsible for proton translocation from acid to the base and their characteristic time scales. Conclusions drawn from this study are discussed in molecular detail, highlighting experimental comparisons.

La nature des acides dans un environnement aqueux est primordiale dans de nombreux aspects de la chimie et de la biologie. La caractéristique principale d'un acide est sa capacité à transférer un proton vers une molécule d'eau ou vers n'importe quelle base, mais ce procédé n'est pas aussi simple qu'il y paraît. Il peut au contraire être extrêmement complexe et dépendre de manière cruciale de la solvatation des différents intermédiaires de réaction impliqués. Cette thèse décrit les études computationnelles basées sur des simulations de dynamique moléculaire ab initio qui ont pour but d'obtenir une description à l'échelle moléculaire des divers procédés de transferts de proton entre acide et bases dans un milieu aqueux. Pour cela, nous avons étudié une serie de système, dont l'acide hydrofluorique aqueux, l'acide trifluoroacétique aqueux, et un système modèle constitué d'un phénol et d'une entité carboxylate reliés entre eux par une molécule d'eau en solution aqueuse. Deux états intermédiaires ont été identifiés pour le transfert d'un proton depuis un acide. Ces intermédiaires apparaissent stabilisés par un motif local de solvatation via des ponts H. Leurs signatures spectroscopiques ont été caractérisées au moyen de la spectroscopie infrarouge, en utilisant le formalisme de la dynamique moléculaire ab initio, qui inclut l'effet quantique nucléaire de manière explicite. Cette étude a aussi identifié trois chemins de réaction élémentaire, qui sont responsable pour le transfert d'un proton d'un acide à une base, ainsi que leurs échelles de temps caractéristiques. Les conclusions tirées de ces études sont discutées dans les détails, au niveau moléculaire, avec une emphase sur les comparaisons entre les résultats théoriques et les mesures expérimentales obtenues dans a littérature ou via des collaborateurs. / The nature of acids in an aqueous environment is fundamental to many aspects of chemistry and biology. The defining feature of an acid is its ability to transfer a proton to water or to any accepting base, but this seemingly simple process can be complex and highly dependent on the solvation involving different reaction intermediate species. This thesis describes computational studies based on first principles molecular dynamics simulations aimed at obtaining molecular-level descriptions of diverse proton transfer process involving acids and bases in liquid water. For that, we have investigated a variety of systems including aqueous hydrofluoric acid, aqueous trifluoroacetic acid and a model system comprising of a phenol and a carboxyate molecule bridged by a water molecule in aqueous solution. Two different intermediate stages of proton transfer from an acid were identified which are found to be stabilized by distinct local H-bond solvation pattern. Their spectroscopic signatures were characterized using infrared spectroscopy computed from first principles molecular dynamics simulations which incorporate nuclear quantum effects explicitly. This study also identified three elementary reaction pathways that are responsible for proton translocation from acid to the base and their characteristic time scales. Conclusions drawn from this study are discussed in molecular detail, highlighting experimental comparisons.

Les fructose-1,6-bisphosphate aldolases (FBPA) sont des enzymes glycolytiques (EC 4.1.2.13) qui catalysent la transformation réversible du fructose-1,6-bisphosphate (FBP) en deux trioses-phosphates, le glycéraldéhyde-3-phosphate (G3P) et le dihydroxyacétone phosphate (DHAP). Il existe deux classes de FBPA qui diffèrent au niveau de leur mécanisme catalytique. Les classes I passent par la formation d’un intermédiaire covalent de type iminium alors que les classes II, métallodépendantes, utilisent généralement un zinc catalytique. Contrairement au mécanisme des classes I qui a été très étudié, de nombreuses interrogations subsistent au sujet de celui des classes II. Nous avons donc entrepris une analyse détaillée de leur mécanisme réactionnel en nous basant principalement sur la résolution de structures cristallographiques. De nombreux complexes à haute résolution furent obtenus et ont permis de détailler le rôle de plusieurs résidus du site actif de l’enzyme. Nous avons ainsi corrigé l’identification du résidu responsable de l’abstraction du proton de l’O4 du FBP, une étape cruciale du mécanisme. Ce rôle, faussement attribué à l’Asp82 (chez Helicobacter pylori), est en fait rempli par l’His180, un des résidus coordonant le zinc. L’Asp82 n’en demeure pas moins essentiel car il oriente, active et stabilise les substrats. Enfin, notre étude met en évidence le caractère dynamique de notre enzyme dont la catalyse nécessite la relocalisation du zinc et de nombreux résidus. La dynamique de la protéine ne permet pas d’étudier tous les aspects du mécanisme uniquement par l’approche cristallographique. En particulier, le résidu effectuant le transfert stéréospécifique du proton pro(S) sur le carbone 3 (C3) du DHAP est situé sur une boucle qui n’est visible dans aucune de nos structures. Nous avons donc développé un protocole de dynamique moléculaire afin d’étudier sa dynamique. Validé par l’étude d’inhibiteurs de la classe I, l’application de notre protocole aux FBPA de classe II a confirmé l’identification du résidu responsable de cette abstraction chez Escherichia coli (Glu182) mais pointe vers un résidu diffèrent chez H. pylori (Glu149 au lieu de Glu142). Nos validations expérimentales confirment ces observations et seront consolidées dans le futur. Les FBPA de classe II sont absentes du protéome humain mais sont retrouvées chez de nombreux pathogènes, pouvant même s'y révéler essentielles. Elles apparaissent donc comme étant une cible idéale pour le développement de nouveaux agents anti-microbiens. L’obtention de nouveaux analogues des substrats pour ces enzymes a donc un double intérêt, obtenir de nouveaux outils d’étude du mécanisme mais aussi développer des molécules à visée pharmacologique. En collaboration avec un groupe de chimistes, nous avons optimisé le seul inhibiteur connu des FBPA de classe II. Les composés obtenus, à la fois plus spécifiques et plus puissants, permettent d’envisager une utilisation pharmacologique. En somme, c’est par l’utilisation de techniques complémentaires que de nouveaux détails moléculaires de la catalyse des FBPA de classe II ont pu être étudiés. Ces techniques permettront d’approfondir la compréhension fine du mécanisme catalytique de l’enzyme et offrent aussi de nouvelles perspectives thérapeutiques. / Fructose-1,6-bisphosphate aldolases (FBPA) are glycolytic enzymes (EC 4.1.2.13) that catalyze the reversible cleavage of fructose-1,6-bisphosphate (FBP) into the triose phosphates, glyceraldehyde-3-phosphate (G3P) and dihydroxyacetone phosphate (DHAP). There are two classes of FBPAs that differ at the level of their mechanism. Class I FBPAs form a covalent iminium intermediate whereas class II FBPAs, being metalloenzymes, generally use a catalytic zinc in their reaction mechanism. In contrast to the mechanism of the class I FBPAs, which has been thoroughly studied, there are several unresolved inquiries as to the mechanism of class II FBPAs. We have therefore pursued a detailed analysis of the reaction mechanism using as a primary tool the elucidation of crystallographic structures. Several high resolution complexes have been resolved and have provided critical evidence to help us suggest the implication and role of several key residues in the active site. Consequently, we have correctly identified the residue which is responsible for the abstraction of the O4 proton from FBP, a vital step in the reaction mechanism. The residue responsible for this abstraction, which had incorrectly been assigned to Asp82 (in Helicobacter pylori), has been appropriately consigned to His180, a residue which is involved in coordinating the zinc molecule. Nevertheless, Asp82 remains an important residue as it orients, activates and stabilizes substrates. Finally, our study brings to evidence the dynamic character of our enzyme in which catalysis entails the relocalization of the catalytic zinc and several residues. The complexity of this reaction, notably one of the proton exchanges in the mechanism, could not be resolved solely by crystallographic means. In fact, the residue responsible for the stereospecific transfer of the pro(S) proton on carbon 3 (C3) of DHAP is situated on a loop that was not resolved in any of our structures. We therefore developed a molecular dynamics approach to study this intricate movement. After preliminary validation by inhibitor studies with class I FBPAs, the protocol was applied to class II FBPAs and several remarkable observations emerged: the residue responsible for this abstraction in Escherichia coli is Glu182 whereas a different residue, Glu149 (instead of Glu142) appears to assume this role in H. pylori. Our preliminary validations have confirmed this observation and shall be further consolidated in the future. Class II FBP aldolases, although absent from the human proteome, are prevalently found in several pathogens, and have further been found to be essential to a number of these organisms. As such, they are ideal targets for the development of novel anti-microbial agents. Developing new analogues of the cognate substrates of these enzymes is therefore not only advantageous for mechanistic studies, but has endless pharmacological potential. In the context of a collaborative effort involving a group of chemists, a compound that initially had an inhibition constant in the millimolar range was optimized and produced a series of compounds that inhibit in the nanomolar range.

Thèse numérisée par la Division de la gestion de documents et des archives de l'Université de Montréal.

No description available.

Les fructose-1,6-bisphosphate aldolases (FBPA) sont des enzymes glycolytiques (EC 4.1.2.13) qui catalysent la transformation réversible du fructose-1,6-bisphosphate (FBP) en deux trioses-phosphates, le glycéraldéhyde-3-phosphate (G3P) et le dihydroxyacétone phosphate (DHAP). Il existe deux classes de FBPA qui diffèrent au niveau de leur mécanisme catalytique. Les classes I passent par la formation d’un intermédiaire covalent de type iminium alors que les classes II, métallodépendantes, utilisent généralement un zinc catalytique. Contrairement au mécanisme des classes I qui a été très étudié, de nombreuses interrogations subsistent au sujet de celui des classes II. Nous avons donc entrepris une analyse détaillée de leur mécanisme réactionnel en nous basant principalement sur la résolution de structures cristallographiques. De nombreux complexes à haute résolution furent obtenus et ont permis de détailler le rôle de plusieurs résidus du site actif de l’enzyme. Nous avons ainsi corrigé l’identification du résidu responsable de l’abstraction du proton de l’O4 du FBP, une étape cruciale du mécanisme. Ce rôle, faussement attribué à l’Asp82 (chez Helicobacter pylori), est en fait rempli par l’His180, un des résidus coordonant le zinc. L’Asp82 n’en demeure pas moins essentiel car il oriente, active et stabilise les substrats. Enfin, notre étude met en évidence le caractère dynamique de notre enzyme dont la catalyse nécessite la relocalisation du zinc et de nombreux résidus. La dynamique de la protéine ne permet pas d’étudier tous les aspects du mécanisme uniquement par l’approche cristallographique. En particulier, le résidu effectuant le transfert stéréospécifique du proton pro(S) sur le carbone 3 (C3) du DHAP est situé sur une boucle qui n’est visible dans aucune de nos structures. Nous avons donc développé un protocole de dynamique moléculaire afin d’étudier sa dynamique. Validé par l’étude d’inhibiteurs de la classe I, l’application de notre protocole aux FBPA de classe II a confirmé l’identification du résidu responsable de cette abstraction chez Escherichia coli (Glu182) mais pointe vers un résidu diffèrent chez H. pylori (Glu149 au lieu de Glu142). Nos validations expérimentales confirment ces observations et seront consolidées dans le futur. Les FBPA de classe II sont absentes du protéome humain mais sont retrouvées chez de nombreux pathogènes, pouvant même s'y révéler essentielles. Elles apparaissent donc comme étant une cible idéale pour le développement de nouveaux agents anti-microbiens. L’obtention de nouveaux analogues des substrats pour ces enzymes a donc un double intérêt, obtenir de nouveaux outils d’étude du mécanisme mais aussi développer des molécules à visée pharmacologique. En collaboration avec un groupe de chimistes, nous avons optimisé le seul inhibiteur connu des FBPA de classe II. Les composés obtenus, à la fois plus spécifiques et plus puissants, permettent d’envisager une utilisation pharmacologique. En somme, c’est par l’utilisation de techniques complémentaires que de nouveaux détails moléculaires de la catalyse des FBPA de classe II ont pu être étudiés. Ces techniques permettront d’approfondir la compréhension fine du mécanisme catalytique de l’enzyme et offrent aussi de nouvelles perspectives thérapeutiques. / Fructose-1,6-bisphosphate aldolases (FBPA) are glycolytic enzymes (EC 4.1.2.13) that catalyze the reversible cleavage of fructose-1,6-bisphosphate (FBP) into the triose phosphates, glyceraldehyde-3-phosphate (G3P) and dihydroxyacetone phosphate (DHAP). There are two classes of FBPAs that differ at the level of their mechanism. Class I FBPAs form a covalent iminium intermediate whereas class II FBPAs, being metalloenzymes, generally use a catalytic zinc in their reaction mechanism. In contrast to the mechanism of the class I FBPAs, which has been thoroughly studied, there are several unresolved inquiries as to the mechanism of class II FBPAs. We have therefore pursued a detailed analysis of the reaction mechanism using as a primary tool the elucidation of crystallographic structures. Several high resolution complexes have been resolved and have provided critical evidence to help us suggest the implication and role of several key residues in the active site. Consequently, we have correctly identified the residue which is responsible for the abstraction of the O4 proton from FBP, a vital step in the reaction mechanism. The residue responsible for this abstraction, which had incorrectly been assigned to Asp82 (in Helicobacter pylori), has been appropriately consigned to His180, a residue which is involved in coordinating the zinc molecule. Nevertheless, Asp82 remains an important residue as it orients, activates and stabilizes substrates. Finally, our study brings to evidence the dynamic character of our enzyme in which catalysis entails the relocalization of the catalytic zinc and several residues. The complexity of this reaction, notably one of the proton exchanges in the mechanism, could not be resolved solely by crystallographic means. In fact, the residue responsible for the stereospecific transfer of the pro(S) proton on carbon 3 (C3) of DHAP is situated on a loop that was not resolved in any of our structures. We therefore developed a molecular dynamics approach to study this intricate movement. After preliminary validation by inhibitor studies with class I FBPAs, the protocol was applied to class II FBPAs and several remarkable observations emerged: the residue responsible for this abstraction in Escherichia coli is Glu182 whereas a different residue, Glu149 (instead of Glu142) appears to assume this role in H. pylori. Our preliminary validations have confirmed this observation and shall be further consolidated in the future. Class II FBP aldolases, although absent from the human proteome, are prevalently found in several pathogens, and have further been found to be essential to a number of these organisms. As such, they are ideal targets for the development of novel anti-microbial agents. Developing new analogues of the cognate substrates of these enzymes is therefore not only advantageous for mechanistic studies, but has endless pharmacological potential. In the context of a collaborative effort involving a group of chemists, a compound that initially had an inhibition constant in the millimolar range was optimized and produced a series of compounds that inhibit in the nanomolar range.

Thèse numérisée par la Division de la gestion de documents et des archives de l'Université de Montréal

In ischaemic stroke a disruption of cerebral blood flow leads to impaired metabolism and the formation of an ischaemic penumbra in which tissue at risk of infarction is sought for clinical intervention. In stroke trials, therapeutic intervention has largely been based on perfusion-weighted measures, but these have not been shown to be good predictors of tissue outcome. The aim of this thesis was to develop analysis techniques for magnetic resonance imaging (MRI) of chemical exchange saturation transfer (CEST) in order to quantify metabolic signals associated with tissue fate in patients with acute ischaemic stroke. This included addressing robustness for clinical application, and developing quantitative tools that allow exploration of the in-vivo complexity. Tissue-level analyses were performed on a dataset of 12 patients who had been admitted to the John Radcliffe Hospital in Oxford with acute ischaemic stroke and recruited into a clinical imaging study. Further characterisation of signals was performed on stroke models and tissue phantoms. A comparative study of CEST analysis techniques established a model-based approach, Bloch-McConnell model analysis, as the most robust for measuring pH-weighted signals in a clinical setting. Repeatability was improved by isolating non-CEST effects which attenuate signals of interest. The Bloch-McConnell model was developed further to explore whether more biologically-precise quantification of CEST effects was both possible and necessary. The additional model complexity, whilst more reflective of tissue biology, diminished contrast that distinguishes tissue fate, implying the biology is more complex than pH alone. The same model complexity could be used reveal signal patterns associated with tissue outcome that were otherwise obscured by competing CEST processes when observed through simpler models. Improved quantification techniques were demonstrated which were sufficiently robust to be used on clinical data, but also provided insight into the different biological processes at work in ischaemic tissue in the early stages of the disease. The complex array of competing processes in pathological tissue has underscored a need for analysis tools adequate for investigating these effects in the context of human imaging. The trends herein identified at the tissue level support the use of quantitative CEST MRI analysis as a clinical metabolic imaging tool in the investigation of ischaemic stroke.