Shungite is a carbonaceous rock which is abundant in Karelia (Russian Federation). Large deposits of shungite with low levels of carbon (approx. 10% C) are also found in Kazakhstan, where it is mined under the trade name Taurit (Koksu Mining Company). Although Taurit has been reported to be used as an adsorbent for hazardous compounds in water treatment, there is very little precise data about its adsorption capacity or the compounds adsorbed. In this study, the ability of Taurit to adsorb Zn(II) was investigated and Freundlich isotherms were determined for both distilled water and tap water. Taurit was found to have a high buffer capacity leading to pH values > 7.0 in aqueous solution. Because dissolved zinc precipitates as Zn(OH)2 under alkaline conditions, the pH must be carefully controlled and kept ≤7.0. Despite the small inner surface area (BET) of Taurit (13.4 m2 g−1), Freundlich coefficients for distilled water (Kf = 2.4, n = 4.0) and tap water (Kf = 1.5, n = 2.5) were similar to other adsorbents. Our results indicate that Taurit could provide a cheap alternative to activated carbon since both substances have a similar adsorption capacity (at least for Zn(II)).

The application of the wrinkle measuring method described in Müller et al. (2017) and the subsequent evaluation algorithm of a range of deep-drawn samples were used to determine the influences and interdependencies of blankholder force, tool temperatures, and drawing height on the formation of wrinkles in paperboard. The main influences were identified and quantitatively evaluated. For the given experimental space, a regression function was derived and validated in further experiments. It was shown that a quadratic regression was superior to the previously used linear regression. The findings were discussed and compared with the results of similar experiments from past publications. Special attention was given to the wrinkles formed and the resulting quality of the formed paperboard cups. The restrictions of the data acquisition from the measuring method that was used and limitations of the model were presented to demonstrate the reliability of the results.

In oral sciences, chitosan application is of interest due to its antimicrobial and hemostatic activity. Chitosan coating of dentures and other intraoral devices could be beneficial for treatment of denture stomatitis or in the management of postoperative bleeding. Disinfection of dentures and prosthodontic materials is crucial before their use in patients. This study investigated the influence of chemical disinfectants on chitosan-coated surfaces. A total of 100 specimens were made: 50 of PMMA (polymethyl methacrylate), and 50 of PETG (polyethylene terephthalate glycol-modified) material and coated with 2% chitosan acetate solution. In each material, 5 groups (10 specimens each) were established and disinfected with Printosept-ID (L1), MD 520 (L2), Silosept (L3), or Dentavon (L4), or stored in distilled water (L0, control group). After disinfection, all specimens underwent abrasion tests (30,000 cycles in a tooth-brushing simulator). Areas without chitosan coating were measured by digital planimetry both before and after the disinfection/abrasion procedure and a damage-score was calculated. Regarding chitosan coating, the statistical analysis showed a significant influence of the disinfectants tested and significant differences between disinfectants (p < 0.05). Chitosan coating was most stable on PMMA and PETG after disinfection with MD 520 (L2). Otherwise, active oxygen containing disinfectants (L3, L4) led to the greatest alterations in the chitosan coating.

Background Creutzfeldt–Jakob disease is a rare and rapidly fatal neurodegenerative disease. Since clinicians may see only very few cases during their professional career, it is important to be familiar with the clinical presentation and progression, to perform appropriate investigations, and allow for quick diagnosis. Case presentation A 73-year-old British Caucasian woman presented with acute confusion of 2 weeks’ duration on a background of low mood following a recent bereavement. Her symptoms included behavioral change, visual hallucinations, vertigo, and recent falls. She was mildly confused, with left-sided hyperreflexia, a wide-based gait, and intention tremor in her left upper limb. Initial blood tests, computed tomography, and magnetic resonance imaging of her brain showed no significant abnormality. Following admission, she had rapid cognitive decline and developed florid and progressive neurological signs; a diagnosis of prion disease was suspected. A lumbar puncture was performed; cerebrospinal fluid was positive for 14–3-3 protein, real-time quaking-induced conversion, and raised levels of s-100b proteins were detected. An electroencephalogram showed bilateral periodic triphasic waves on a slow background. The diagnosis of probable Creutzfeldt–Jakob disease was made. Conclusions This case report highlights key features in the initial presentation and clinical development of a rare but invariably rapidly progressive and fatal disease. It emphasizes the importance of considering a unifying diagnosis for multifaceted clinical presentations. Although it is very rare, Creutzfeldt–Jakob disease should be considered a diagnosis for a mixed neuropsychiatric presentation, particularly with rapid progressive cognitive decline and development of neurological signs. However, to avoid overlooking early signal change on magnetic resonance imaging, it is important to take diffusion-weighted magnetic resonance imaging for all patients with neuropsychological symptoms. Importantly, early diagnosis also ensures the arrangement of suitable contamination control measures to minimize the risk of infection to health care professionals and other patients.

The past years have seen an incredible increase in the quality and success rates of treatments in pediatric medicine. One of the resulting major challenges refers to the management of primary or secondary residual executive function deficits in affected children. These deficits lead to problems in the ability to acquire, understand, and apply abstract and complex knowledge and to plan, direct, and control actions. Executive functions deficits are important to consider because they are highly predictive of functioning in social and academic aspects of daily life. We argue that current clinical practice does not sufficiently account for the complex cognitive processes in this population. This is because widely applied pharmacological interventions only rarely account for the complexity of the underlying neuronal mechanisms and do not fit well into possibly powerful “individualized medicine” approaches. Novel treatment approaches targeting deficits in executive functions in seriously ill children could focus on neuronal oscillations, as these have some specific relations to different aspects of executive function. Importantly, such treatment approaches can be individually tailored to the individuals’ deficits and can be transferred into home-treatment or e-health solutions. These approaches are easy-to-use, can be easily integrated into daily life, and are becoming increasingly cost-effective.

Objectives This randomized controlled trial evaluates the effects of two different rest periods between as set of balance exercises after stroke during inpatient rehabilitation. Results Twenty patients after stroke [11 males; mean (SD) age 65.4 (11.5) years; duration of illness 5.3 (3.4) weeks; 16 (80%) left-sided strokes] were randomly allocated into two groups of either a full rest (FR) of 4 min (n = 10) or a short rest (SR) of 1 min between exercise sets (n = 10). Patients improved from baseline until immediately after exercises in one-leg standing time on the affected leg [SR: mean difference 5.1 s (SD 10.3) and FR: 2.0 s (2.4)] and tandem standing time (TST). [SR: 14.9 s (SD 24.6) and FR: 5.7 s (12.0)], but OLST and TST did not differ significantly between groups (p = 0.35 and p = 0.52, respectively). Trial registration The study was registered retrospectively in the German Register of Clinical Trials with the ID: DRKS00013979

The investigation of the hidden metric space behind complex network topologies is a fervid topic in current network science and the hyperbolic space is one of the most studied, because it seems associated to the structural organization of many real complex systems. The popularity-similarity-optimization (PSO) model simulates how random geometric graphs grow in the hyperbolic space, generating realistic networks with clustering, small-worldness, scale-freeness and rich-clubness. However, it misses to reproduce an important feature of real complex networks, which is the community organization. The geometrical-preferential-attachment (GPA) model was recently developed in order to confer to the PSO also a soft community structure, which is obtained by forcing different angular regions of the hyperbolic disk to have a variable level of attractiveness. However, the number and size of the communities cannot be explicitly controlled in the GPA, which is a clear limitation for real applications. Here, we introduce the nonuniform PSO (nPSO) model. Differently from GPA, the nPSO generates synthetic networks in the hyperbolic space where heterogeneous angular node attractiveness is forced by sampling the angular coordinates from a tailored nonuniform probability distribution (for instance a mixture of Gaussians). The nPSO differs from GPA in other three aspects: it allows one to explicitly fix the number and size of communities; it allows one to tune their mixing property by means of the network temperature; it is efficient to generate networks with high clustering. Several tests on the detectability of the community structure in nPSO synthetic networks and wide investigations on their structural properties confirm that the nPSO is a valid and efficient model to generate realistic complex networks with communities.

The fetus is highly responsive to the level of glucocorticoids in the gestational environment. Perturbing glucocorticoids during fetal development could yield long-term consequences. Extending prior research about effects of prenatally exposed synthetic glucocorticoids (sGC) on brain structural development during childhood, we investigated functional brain correlates of cognitive conflict monitoring in term-born adolescents, who were prenatally exposed to sGC. Relative to the comparison group, behavioral response consistency (indexed by lower reaction time variability) and a brain correlate of conflict monitoring (the N2 event-related potential) were reduced in the sGC exposed group. Relatedly, source localization analyses showed that activations in the fronto-parietal network, most notably in the cingulate cortex and precuneus, were also attenuated in these adolescents. These regions are known to subserve conflict detection and response inhibition as well as top-down regulation of stress responses. Moreover, source activation in the anterior cingulate cortex correlated negatively with reaction time variability, whereas activation in the precuneus correlated positively with salivary cortisol reactivity to social stress in the sGC exposed group. Taken together, findings of this study indicate that prenatal exposure to sGC yields lasting impacts on the development of fronto-parietal brain functions during adolescence, affecting multiple facets of adaptive cognitive and behavioral control.

Fingertip amputation injuries are common in all ages. Conservatively treated fingertips can regenerate skin and soft tissues to form a functionally and cosmetically excellent new fingertip. Little is known about this ability that, in humans, is confined to the fingertips. Even less is known about the role of the bacteria that regularly colonize these wounds without negative impact on regeneration and healing. As an alternative to surgery, self-adhesive film dressings are commonly used to establish a wet chamber around the injury. These dressings leak malodorous wound fluid eventually until the wound is dry. Having that into consideration, we have therefore developed a silicone finger cap that forms a mechanically protected, wet chamber around the injury for optimal regeneration conditions. It contains a puncturable reservoir for excess wound fluid, which can be thus routinely analyzed for diagnostic and research purposes. This study protocol explains the first randomized controlled trial (RCT) on the semiocclusive treatment of fingertip amputations in both children and adults comparing traditional film dressings with the novel silicone finger cap. Being the first RCT using 2 medical devices not yet certified for this indication, it will gather valuable information for the understanding of fingertip regeneration and the design of future definitive studies.

Chitosan is a cationic natural polymer that is widely used as a topical dressing in wound management. Temporary coatings of removable denture bases with chitosan might be useful as supportive treatment in oral medicine. The aim of this study was to analyze the thickness, uniformity, and adhesive strength of chitosan coatings on simulated denture bases made from polymethyl methacrylate (PMMA). According to a standardized protocol, 20 PMMA cylinders (13 mm diameter, 5 mm in height) as well as 20 cubes (a = 25 mm) with intaglio U-shaped profiles were manufactured to simulate average sized alveolar ridges. Cylinders as well as cubes were divided into four test series with n = 5 each. After sandblasting with silica-modified alumina, one frontal surface of the PMMA cylinders and the intaglio surfaces of the U-shaped profiles was coated with chitosan acetate solution according to the following protocols: one layer of 2% chitosan acetate solution (test series I), one layer of 4% chitosan acetate solution (test series II), two layers of 2% chitosan acetate solution (test series III), and two layers of 4% chitosan acetate solution (test series IV). After drying and neutralization with NaOH, each cube was cut transversely and the coating thickness across the U-shaped profile assessed with a light microscope. Adhesive strength was evaluated by simulated tooth brushing and the loss of chitosan coating was evaluated qualitatively. Statistical analysis used Friedman ANOVA test for dependent samples and Kruskal-Wallis test for independent samples, post-hoc Dunn’s test (p < 0.05), and binomial test (p = 0.05). The mean chitosan coating thicknesses in the depth of the U-profiles were 71 µm (test series I), 77 µm (test series II), 121 µm (test series III), and 517 µm (test series VI). The thickness continuously decreased with rising angulation of the U-profile side walls. In test series I, the chitosan coating thickness significantly dropped above a 30° angulation of the U-profile side walls. In test series II to IV, the chitosan thickness drop was not statistically significant at angulations of 30° and 60°, but was at 90° angulation of the U-profile side walls. Adhesion strength was rated fair to good and did not differ significantly among the four test series. The coating technique described revealed chitosan layers with overall good adhesion strength but differing thicknesses. Coatings with one or two layers of 4% chitosan acetate solution allowed a relatively uniform chitosan thickness and thus might be usable in oral medicine.