Os cimentos de fosfato de cálcio (CFCs) têm atraído grande interesse para uso em ortopedia e odontologia como substitutos para partes danificadas do sistema esquelético, mostrando boa biocompatibilidade e osteointegração, permitindo sua utilização como enxerto ósseo. As características que determinam os CFCs biomateriais atrativos para a reconstituição ou remodelação óssea, são a facilidade de manipulação e moldagem, sem ter de dar forma prévia ao implante, adaptando-se totalmente à forma da cavidade óssea. Diversos estudos, têm mostrado que a adição de aditivos poliméricos tem uma forte influência sobre as propriedades do cimento. A baixa resistência mecânica é o principal obstáculo a uma maior utilização de CFC como material de implante. O objetivo deste trabalho foi avaliar as propriedades de um cimento com base em α-fosfato tricálcico (α -TCP ), adicionado de PVA (poli (álcool vinílico)) (10%, 8%, 6%), hidrogel de PVA (10%,8%,6%) reticulado com ácido cítrico (10%), hidrogel de alginato de sódio (2%) e poliacrilato de amônia (1%), todos em massa, foram adicionados ao pó de α -TCP sintetizado. As amostras foram moldadas e avaliadas quanto à densidade, porosidade, teste ―in vitro‖ (Simulated Body Fluid), fases cristalinas e propriedades mecânicas. Os resultados mostram o aumento das propriedades mecânicas do cimento, quando adicionado destes polímeros. A reticulação dos hidrogéis de PVA com ácido cítrico foi eficiente.O hidrogel de PVA, o hidrogel de alginato de sódio e o poliacrilato de amônia agiram como redutor de líquido. / The calcium phosphate cements (CPCs) have great interest for use in orthopedics and dentistry as replacements for damaged parts of the skeletal system, showing good biocompatibility and osseointegration, allowing its use as a bone graft. The characteristics that determine CPCs attractive biomaterials for bone remodeling or rebuilding, is ease of handling and molding, without having to shape prior to implantation, adapting itself fully to the shape of the bone cavity. Several studies in literature have shown that the addition of polymeric additives has a strong influence on the mechanical properties of cement. The low mechanical strength is the main impediment to a broader use of calcium phosphate bone cement as implant material. The aim of this work was evaluate the strength of a CPC based on α-tricalcium phosphate, with polymeric additions. CPC was synthesized and PVA (poli (vinyl alcohol)) (10%, 8%, 6%), sodium alginate hydrogel (2%) and ammonium polyacrylate (1%), all by weight, were added to the powder. Specimens were molded and evaluated for density, porosity, in vitro test (Simulated Body Fluid), crystalline phases and mechanical properties. The results show the increase of the mechanical properties of cement when added of polymeric additives. The crosslinking of PVA hydrogels with citric acid was effective. The PVA hydrogel, the hydrogel sodium alginate and ammonium polyacrylate acted as a reducing liquid.

No description available.

No description available.

A scale-linking, experimental study complemented by an analytical model was carried out to investigate the influence of fiber orientation on the crack-opening behavior of strain-hardening cement-based composites (SHCC). Three SHCC compositions were investigated with polyvinyl alcohol (PVA) and ultra-high molecular weight polyethylene (UHMWPE) fibers in combination with normal- and high-strength matrices. The micromechanical experiments with fiber inclinations of 0◦, 30◦, 45◦, and 60◦ involved fiber embedment in plain and fiber-reinforced specimens. The experimentally derived micromechanical parameters were input into an analytical crack-bridging model to assess the upscaling accuracy of the micromechanical results by comparing the predicted crack-bridging laws to the single-crack opening behavior of equivalent miniature SHCC specimens with controlled fiber orientation. This study yields new insights into the effect of fiber orientation on the crackbridging properties of different types of SHCC, assesses the link between micromechanical and composite scale properties, offers a solid experimental basis for refining the analytical models, and developing anisotropic materials models for SHCC in dependence on fiber orientation.

Ultrasound has been established as one of the most widely used imaging modalities for diagnostic purposes, due to the several advantages it provides in comparison with other techniques. Hence, ways to further improve the confidence in diagnoses provided by ultrasound are constantly being investigated. One of them is the introduction of Ultrasound Contrast Agents, which can enhance the weak echoes produced by the small vessels, improving the imaging performance. In this study, a setup was created and six ultrasound imaging techniques were implemented by using the Verasonics Research System®, in order to take advantage of the different behavior between the tissue and the Polyvinyl-Alcohol microbubbles, when exposed to ultrasound. These were: Fundamental B-mode, Ultraharmonic, PulseInversion, Subharmonic Pulse Inversion, Ultraharmonic Pulse Inversion, Combination of the Sub- and Ultraharmonic Pulse Inversion. For the assessment of the bubbles’ response, the amplitude spectra were used, which showed a limited detection around the ultraharmonic region. For the evaluation of the imaging performance of the techniques, the Contrast-to-Tissue (CTR) and Contrast-to-Noise Ratios (CNR) were calculated. The Combination of the Sub- and Ultraharmonic Pulse Inversion reported the highest imaging performance among all the techniques. A comparison with previous articles provided a similar pattern in terms of CTR. / Technology

Thesis (MScEng (Civil Engineering))--University of Stellenbosch, 2005. / 192 leaves on CD format, preliminary i-xii pages and numbered pages 1-135. Includes bibliography, list of figures and tables. / ENGLISH ABSTRACT: As a fibre reinforced material, engineered cementitious composite (ECC) has tough, strain-hardening behaviour in tension despite containing low volumes of fibres. This property can be brought about by developments in fibre, matrix and interfacial properties. Poly Vinyl Alcohol (PVA) fibre has been developed in recent years for ECC, due to its high tensile strength and elasticity modulus. However, the strong interfacial bond between fibre surface and matrix is a challenge for its application. This study focuses on the tailoring of matrix and fibre/matrix interfacial properties by cement replacement with fly ash (FA) and Ground Granulated Corex Slagment (GGCS). In this study the direct tensile test, three point bending test, micro-scale analysis, such as X-Ray Fluorescence Spectrometry analysis (XRF), Scanning Electron Microscope (SEM), are employed to investigate the influence of cement replacement, aging, Water/Binder (W/B) ratio, workability on ECC behaviour. This study has successfully achieved the aim that cement replacement by FA and GGCS helps to improve the fibre/matrix interfacial properties and therefore enhances the ECC tensile behaviour. Specifically, a high volume FA-ECC has stable high tensile strain capacity at the age of 21 days. This enables a constant matrix design for the investigation of other matrix influences. The Slag-ECC has a higher tensile strength but lower tensile strain capacity. The combination of FA and GGCS, moderate tensile strength and strain capacity is achieved Both tensile tests and Micro-scale analyses infer that the high volume FA-ECC has an adhesive type fibre/matrix interfacial interaction, as opposed to the cohesive type of normal PVA fibre-ECC. The different tensile behaviour trend of steel fibre-ECC and PVA fibre-ECC with the FA content is presented and discussed in this research. The investigations of aging influence indicate that the high volume FA-ECC has a beneficial effect on the properties of the composite at an early stage. However, at a high age, it has some difficulty to undergo multiple cracking and then leads to the reduction of tensile strain capacity. The modified mix design is made with the combination of FA and GGCS, which successfully increases the interfacial bond and, thereby, improves the shear transfer to reach the matrix crack strength. Therefore, an improved high age tensile behaviour is achieved. The W/B and fresh state workability influence investigations show that the W/B can hardly affect the tensile strain at early age. However, the workability influences on composite tensile strain significantly, because of the influence on fibre dispersion. Other investigations with regard to the hybrid fibre influences, the comparison of bending behaviours between extruded plate and cast plate, the relation between bending MOR and tensile stress, and the relation between compression strength and tensile strength contribute to understand ECC behaviour. / AFRIKAANSE OPSOMMING: As ‘n veselversterkte materiaal, het ontwerpte sementbasis saamgestelde materiale, taai vervormingsverhardingseienskappe in trek, ten spyte van lae veselinhoud. Hierdie eienskap word bewerkstellig, deur ontwikkelings in vesel, matriks en tussenveselbindingseienskappe. Poli-Viniel Alkohol (PVA) vesels is ontwikkel vir ECC, as gevolg van die hoë trekkrag en hoë modulus van hierdie veseltipe. Die sterk binding tussen die PVA-veseloppervlak en die matriks is egter ‘n uitdaging vir sy toepassing. Hierdie studie fokus op die skep van gunstige matriks en vesel/matriks tussenvesel-bindingseienskappe deur sement te vervang met vlieg-as (FA) en slagment (GGCS).In hierdie navorsing is direkte trek-toetse, drie-punt-buigtoetse, mikro-skaal analise (soos die X-straal ‘Fluorescence Spectrometry’ analise (XRF) en Skanderende Elektron Mikroskoop (SEM))toegepas. Hierdie metodes is gebruik om die invloed van sementvervanging,veroudering, water/binder (W/B)-verhouding en werkbaarheid op die meganiese gedrag van ECC te ondersoek.Die resultate van hierdie navorsing toon dat sementvervanging deur FA en GGCS help om die vesel/matriks tussenveselbindingseienskappe te verbeter. Dus is die ECC-trekgedrag ook verbeter. Veral ‘n hoë volume FA-ECC het stabiele hoë trekvervormingskapasiteit op ‘n ouderdom van 21 dae. Dit bewerkstellig ‘n konstante matriksontwerp vir die navorsing van ander matriks invloede. Die Slag-ECC het ‘n hoër treksterkte, maar laer trekvervormingskapasiteit. Deur die kombinasie van FA en GGCS word hoë treksterkte, sowel as gematigde vervormbaarheid in trek verkry. Beide trektoetse en mikro-skaal analise dui aan dat die hoë volume FA-ECC ‘n adhesie-tipe vesel/matriks tussenvesel-bindingsinteraksie het, teenoor die ‘kohesie-tipe van normale PVA vesel-ECC. Die verskille in trekgedrag van staalvesel-ECC en PVA vesel-ECC ten opsigte van die FA-inhoud is ondersoek en word bespreek in die navorsing. Die navorsing toon verder dat die hoë volume FA-ECC goeie meganiese eienskappe het op ‘n vroeë ouderdom. Op hoër ouderdom word minder krake gevorm, wat ‘n verlaging in die trekvervormingskapasiteit tot gevolg het. Met die kombinasie van FA en GGCS, word die vesel-matriksverband verhoog, waardeur ‘n verbetering in die skuifoordrag tussen vesel en matriks plaasvind. Verbeterde hoë omeganiese gedrag word daardeur tot stand gebring. Navorsing ten opsigte van die invoed van die W/B en werkbaarheid dui daarop dat die W/B slegs geringe invloed het op die trekvormbaarheid, terwyl die werkbaarheid ‘n dominerende rol speel in hierdie verband.Verdere studies sluit in die invloed van verskillende vesels, die vergelyking van die buigingsgedrag van geëkstueerde plate en gegote plate, die verhouding tussen buigsterkte en treksterkte, en die verhouding tussen druksterkte en treksterkte dra by tot beter begrip van die gedrag van ECC.

No description available.

<p>The purpose of this Master's Thesis is to investigate the outlooks for a seed stage venture capital fund investing in biotechnology-related spinouts from public research to be established in Mecklenburg-Western Pomerania, Germany. Recommendations on how to improve any discovered deficits of the fund's prerequisites are also to be presented. </p><p>Analyses showed that the spinout potential of the research in the region is weak. The entrepreneurial prerequisites of the researchers, in terms of previous experience, business knowledge and a track record that would vouch for them being suitable entrepreneurs, are generally poor. Nor is there sufficient industry in the region to facilitate the establishment of and subsequent businesses for the spinouts. The seed fund must therefore provide any future portfolio ventures with a substantial amount of Hands-on Management. </p><p>To improve the prerequisites for the seed fund, PVA-MV must influence the researchers'attitude towards spinouts and make the monetary gains more visible. The researchers must be imbued with a business approach in their research and PVA-MV must market its services as being the intermediary of government, universities and industry and as being able to create opportunities for researchers as well as for industry. PVA-MV should also focus on the few institutes and individual researchers that do have some favourable entrepreneurial characteristics, in order to evoke professional entrepreneurs with a forming track record. To cope with the deficient prerequisites of the fund, PVA-MV must expand the competence of its own work force and focus on the rate of return rather than on building regional infrastructure pro bono as a governmental agency.</p>

The purpose of this Master's Thesis is to investigate the outlooks for a seed stage venture capital fund investing in biotechnology-related spinouts from public research to be established in Mecklenburg-Western Pomerania, Germany. Recommendations on how to improve any discovered deficits of the fund's prerequisites are also to be presented. Analyses showed that the spinout potential of the research in the region is weak. The entrepreneurial prerequisites of the researchers, in terms of previous experience, business knowledge and a track record that would vouch for them being suitable entrepreneurs, are generally poor. Nor is there sufficient industry in the region to facilitate the establishment of and subsequent businesses for the spinouts. The seed fund must therefore provide any future portfolio ventures with a substantial amount of Hands-on Management. To improve the prerequisites for the seed fund, PVA-MV must influence the researchers'attitude towards spinouts and make the monetary gains more visible. The researchers must be imbued with a business approach in their research and PVA-MV must market its services as being the intermediary of government, universities and industry and as being able to create opportunities for researchers as well as for industry. PVA-MV should also focus on the few institutes and individual researchers that do have some favourable entrepreneurial characteristics, in order to evoke professional entrepreneurs with a forming track record. To cope with the deficient prerequisites of the fund, PVA-MV must expand the competence of its own work force and focus on the rate of return rather than on building regional infrastructure pro bono as a governmental agency.

Le PVA est un polymère non inflammable, non toxique et biodégradable. Malheureusement, sa réaction principale de synthèse produit un haut débit de résidu qui à niveau du monde devient plusieurs millions de tonnes annuelles. Le résidu est un mélange azéotropique du méthanol et acétate de méthyle, étant l'acétate de méthyle au tour des 80 % en poids. Le méthanol est un réactif utilisé dans la synthèse du PVA et par la réaction de l'acétate de méthyle avec constituants qui sont donneurs de groupes alcool, on peut enrichir en méthanol la courant résiduelle. L'utilisation de l'éthanol comme réactif semble la meilleure alternative parce que sa réaction avec l'acétate de méthyle produise méthanol et acétate d'éthyle. Le méthanol peut être recyclé pour synthétiser plus de PVA et l'acétate d'éthyle est un solvant organique commercialisable. Le mélange du produit de la transesterification de l'acétate de méthyle avec l'éthanol a quatre azeotropes : acétate de méthyle / méthanol ; acétate d'éthyle / éthanol ; acétate de méthyle / éthanol et acétate d'éthyle / méthanol. Les deux derniers réagissent entre eux et disparaîtrent quand on utilise la distillation réactive. La constante d'équilibre chimique de la transesterification avec éthanol n'est pas très favorable vers la formation des produits (K=0,63) mais par la combinaison de la distillation et la réaction dans le même appareil, on évite la limitation de l'avancement de la réaction due à la constante d'équilibre. A fur et mesure que la réaction génère plus de produits, ils sont enlevés du milieu réactif par la distillation et la réaction est favorisée de nouveau pour fournir plus de produits. Cet exemple semble une situation typique pour appliquer la distillation réactive, mais il y a la particularité que les deux azeotropes qui ne réagissent, restent et ne permettent pas d'avoir les produits purs dans une seule colonne. Un procédé original qui combine la réaction et un système de changement de pression, nous permet de surpasser les azeotropes réactifs et non réactifs en même temps et en utilisant seulement deux colonnes. Une méthodologie à complexité croissante est utilisée pour caractériser le système proposé qui se compose de : l'analyse infini/infini, la synthèse par un calcul plateau à plateau qui part du plateau d'alimentation en direction aux extrêmes de colonne et la conception qui utilise une fonction coût basée en les proportionnalités par rapport aux variables disponibles de l'analyse et la synthèse.Dans l'étape d'analyse on étudie la faisabilité des séparations proposées et les paramètres des courants externes des colonnes et leur interrelation par moyen des bilans de matière qui englobent les unités. Dans l'étape de synthèse, on étudie les paramètres internes de chaque colonne, en particulier nous avons déterminé l'influence du reflux sur le nombre de plateaux sous les hypothèses simplificatrices de McCabe-Thiele. Dans l'étape de conception, on évalue les paramètres externes et internes ensembles sous les considérations économiques afin de trouver les valeurs optimales. Cette étape est plutôt utile pour l'étude de la pression laquelle influence toutes les autres variables du système. D'autres aspects développés dans la thèse sont l'étude des données expérimentaux des équilibres liquide-vapeur du système, la comparaison de l'alternative proposée avec les autres alternatives, estimation des conditions optimales d'opération et la vérification des résultats est obtenue par simulation rigoureuse avec ProSim Plus. MOTS CLEFS: distillation réactive, équilibres liquide-vapeur, analyse, synthèse, conception, alcool de polyvinyle (PVA), acétate de méthyle, système de changement de pression réactif. / The PVA is a non flammable, non toxic and biodegradable polymer but its synthesis reaction generates methyl acetate which is collected as a residue at its azeotropic composition with one of the reactants: the methanol. Several millions tons of residue are collected each year around the world. The residue contains around 80 % weight in methyl acetate but it can be enriched in methanol by reaction with alcohol donors. The ethanol seems the best alternative because its reaction with the methyl acetate produces methanol and ethyl acetate which is a commercial solvent. The obtained mixture by methyl acetate transesterification with ethanol contains four azeotropes. The components of two of the azeotropes reacts each other and overcomes the azeotrope in a reactive distillation. The reactive distillation is also able to overcome the limitations produced by the small equilibrium constant value. This is the typical situation to use the reactive distillation but there are two non reactive azeotropes remaining. An original process which combines the reaction and a pressure swing distillation is able to overcome the reactive and non reactive azeotropes at the same time with only two columns.The next fast to rigorous methodology is used: infinite/infinite analysis, stage by stage calculation from the feed to the column boundaries at the synthesis and a cost function based on proportionalities on the variables calculated previously at the conception.The feasibility and the characterization of the streams outside the columns is performed at the analysis; the characterization of the parameters inside each column is performed at the synthesis, the reflux influence on the number of stages is the main goal of the synthesis; the parameters with an influence on the overall process like the pressure are evaluated under economical considerations at the conception. It is proposed to fix the recycle stream flow rate and control the product purities with the first column bottoms flow rate. There is a degrees of freedom corresponding to the methyl acetate trapped inside the system which can not be manipulated at steady state. KEYWORDS: reactive distillation, VLE, analysis, synthesis, conception, PVA, reactive pressure swing.