<p>The aim of this thesis was to investigate amphiphilic molecules in aqueous solution. The work was divided into two parts. In the first part the effects of different counterions on phase behavior was investigated, while the second part concerns the 1-monooleoyl-rac-glycerol (MO)/n-octyl-β-D-glucoside (OG)/2H2O-system. </p><p>The effects of mixing monovalent and divalent counterions were studied for two surfactant systems, sodium/calcium octyl sulfate, and piperidine/piperazine octanesulfonate. It was found that mixing monovalent and divalent counterions resulted in a large decrease in cmc already at very low fractions of the divalent counterion. Moreover, the degree of counterion binding for piperidine in the piperidine/piperazine octanesulfonate system was much higher than predicted, probably due to the larger hydrophobic moiety of piperidine.</p><p>The effects of hydrophobic counterions were studied for eight alkylpyridinium octanesulfonates (APOS). The results were discussed in terms of packing constraints. The anomalous behavior of the 2H2O quadrupolar splittings in the lamellar phases was explained by the presence of two or more binding sites at the lamellae surface. </p><p>The MO/OG/water system was studied in general and the MO-rich cubic phases in particular. When mixing MO and OG it was found that OG-rich structures (micelles, hexagonal and cubic phase of space group Ia3d) could solubilize quite large amounts of MO, while the MO-rich cubic structures where considerable less tolerant towards the addition of OG. The micelles in the OG-rich L1 phase were found to remain rather small and discrete in the larger part of the L1 phase area, but at low water concentration and high MO content a bicontinuous structure was indicated. Only small fractions of OG was necessary to convert the MO-rich cubic Pn3m structure to an Ia3d structure, and upon further addition of OG a lamellar (La) phase formed. Since the larger part of the phase diagram contains a lamellar structure (present either as a single La phase or as a dispersion of lamellar particles together with other phases), the conclusion was that introducing OG in the MO structures, forces the MO bilayer to become more flat. Upon heating the cubic phases, structures with more negative curvature were formed. The transformation between the cubic structures required very little energy, and this resulted in the appearance of additional peaks in the diffractograms.</p>

The aim of this thesis was to investigate amphiphilic molecules in aqueous solution. The work was divided into two parts. In the first part the effects of different counterions on phase behavior was investigated, while the second part concerns the 1-monooleoyl-rac-glycerol (MO)/n-octyl-β-D-glucoside (OG)/2H2O-system. The effects of mixing monovalent and divalent counterions were studied for two surfactant systems, sodium/calcium octyl sulfate, and piperidine/piperazine octanesulfonate. It was found that mixing monovalent and divalent counterions resulted in a large decrease in cmc already at very low fractions of the divalent counterion. Moreover, the degree of counterion binding for piperidine in the piperidine/piperazine octanesulfonate system was much higher than predicted, probably due to the larger hydrophobic moiety of piperidine. The effects of hydrophobic counterions were studied for eight alkylpyridinium octanesulfonates (APOS). The results were discussed in terms of packing constraints. The anomalous behavior of the 2H2O quadrupolar splittings in the lamellar phases was explained by the presence of two or more binding sites at the lamellae surface. The MO/OG/water system was studied in general and the MO-rich cubic phases in particular. When mixing MO and OG it was found that OG-rich structures (micelles, hexagonal and cubic phase of space group Ia3d) could solubilize quite large amounts of MO, while the MO-rich cubic structures where considerable less tolerant towards the addition of OG. The micelles in the OG-rich L1 phase were found to remain rather small and discrete in the larger part of the L1 phase area, but at low water concentration and high MO content a bicontinuous structure was indicated. Only small fractions of OG was necessary to convert the MO-rich cubic Pn3m structure to an Ia3d structure, and upon further addition of OG a lamellar (La) phase formed. Since the larger part of the phase diagram contains a lamellar structure (present either as a single La phase or as a dispersion of lamellar particles together with other phases), the conclusion was that introducing OG in the MO structures, forces the MO bilayer to become more flat. Upon heating the cubic phases, structures with more negative curvature were formed. The transformation between the cubic structures required very little energy, and this resulted in the appearance of additional peaks in the diffractograms.

Des ligands diketimines porteurs de substituants N-benzyl, N-9-anthrylmethyl et N-mesitylmethyl (nacnacBnH, nacnacAnH, and nacnacMesH) ont été synthétisés par condensation d’une amine et d’acétyl acétone ou son monoacétal d’éthylène glycol. La chlorination de la position 3 a été effectuée à l’aide de N-chlorosuccinimide conduisant à la formation des ligands ClnacnacBnH et ClnacnacAnH. Cette même position 3 a également été substituée par un groupement succinimide par lithiation du nacnacBnH, suivi de la réaction avec le N-chlorosuccinimide (3-succinimido-nacnacBnH). Les ligands N-aryl nacnacippH et nacnacNaphH (ipp = 2-isopropylphenyl, Naph = 1-naphthyl) ont été préparés selon les procédures reportées dans la littérature. La réaction de ces ligands avec Zn(TMSA)2 (TMSA = N(SiMe3)2) conduit à la formation des complexes nacnacAnZn(TMSA) et ClnacnacBnZn(TMSA). La protonation avec l’isopropanol permet l’obtention des complexes nacnacAnZnOiPr et ClnacnacBnZnOiPr. La réaction avec Mg(TMSA)2 permet quant à elle la formation des complexes nacnacAnMg(TMSA), nacnacMesMg(TMSA), ClnacnacBnMg(TMSA) et ClnacnacAnMg(TMSA). La protonation subséquente à l’aide du tert-butanol permet l’obtention du nacnacMesMgOtBu et du ClnacnacBnMgOtBu, alors que l’on observe uniquement une décomposition avec les ligands possédant des substituants N-anthrylmethyl. La réaction de ces diketimines avec Cu(OiPr)2 conduit aux dimères hétéroleptiques [nacnacBnCu(μ-OiPr)]2 et [3-Cl-nacnacBnCu(μ-OiPr)]2 lors de l’usage des ligands stériquement peu encombrés. Lors de l’utilisation de ligands plus encombrés, la stabilisation du complexe hétéroleptique par dimérisation n’est plus possible, conduisant, par un échange de ligand, à la formation des complexes homoleptiques Cu(nacnacipp)2 et Cu(nacnacNaph)2. Les complexes homoleptiques Cu(nacnacBn)2 et Cu(3-succinimido-nacnacBn)2 ont été obtenus à partir des ligands N-benzyl. Les ligands encore plus encombrés tels que nacnacAnH, nacnacMesH ou ceux comportant des substituants N-methylbenzyl ne présentent alors plus de réactivité avec le Cu(OiPr)2. La plupart des complexes ont été caractérisés par Diffraction des Rayons X. Les complexes homoleptiques ainsi que ceux de TMSA sont monomériques, alors que ceux formés à partir d’alkoxides se présentent sous forme de dimères à l’état solide. Tous les complexes d’alkoxides ainsi que les nacnacAnMg(TMSA)/BnOH et ClnacnacAnMg(TMSA)/BnOH présentent une réactivité modérée à haute en matière de polymérisation du rac-lactide (90% de conversion en 30 secondes à 3 heures). Le nacnacAnZnOiPr permet la synthèse d’un polymère hautement hétérotactique (Pr = 0.90) quand le ClnacnacBnMgOtBu/BnOH génère un polymère isotactique à -30°C (Pr = 0.43). Tous les autres catalyseurs produisent des polymères atactiques avec une légère tendance hétérotactique (Pr = 0.48 – 0.55). Les complexes hétéroleptiques [nacnacBnCu(μ-OiPr)]2 et [3-Cl-nacnacBnCu(μ-OiPr)]2 se révèlent être de très bons catalyseurs pour la polymérisation du rac-lactide présentant une conversion complète du monomère à température ambiante, en solution, en 0,5 à 5 minutes. Le [nacnacBnCu(μ-OiPr)]2 est actif en présence ou absence d’isopropanol, agissant comme agent de transfert de chaine à haute activité (k2 = 32 M–1•s–1) dans le dichlorométhane. Dans l’acétonitrile, le THF, le dichloromethane et le toluène, [nacnacBnCu(μ-OiPr)]2 conduit à une étroite polydispersité, possédant respectivement des kobs = 2.4(1), 5.3(5), 3.6-4.4 and 10(1) min–1. Aucune réaction parasite, telle qu’une trans-esterification, une épimerisation ou une décomposition du catalyseur, n’a été observée. Les complexes homoleptiques en présence d’alcool libre semblent présenter un équilibre avec une petite quantité de leurs équivalents hétéroleptiques, permettant une polymérisation complète, en moins de 60 min, à température ambiante. Tous les catalyseurs de cuivre présentent un haut contrôle de la polymérisation avec une polydispersité égale ou inférieure à 1.1. Les polymères obtenus sont essentiellement atactiques, avec une légère tendance à l’hétérotacticité à température ambiante et -17°C. Le [nacnacBnCu(μ-OiPr)]2 polymérise également la -butyrolactone (BL), l’-caprolactone (CL) et la -valerolactone (VL) avec des constantes respectivement égales à kobs = 3.0(1)•10–2, 1.2–2.7•10–2, et 0.11(1) min–1. Les homopolymères présentent une étroite polydispersité d’approximativement 1.1. Les polymérisations par addition séquentielle ont mis en évidence une trans-estérification (non observée dans les homopolymérisations) si BL ou CL sont introduits après un bloc lactide. / Diketimine ligands bearing N-benzyl, N-9-anthrylmethyl and N-mesitylmethyl substituents (nacnacBnH, nacnacAnH, and nacnacMesH) were prepared from condensation of amine with either acetyl acetone or its ethylene glycol monoketal. Chlorination of the 3-position was achieved using N-chlorosuccinimide, yielding ClnacnacBnH and ClnacnacAnH. The 3-position was also substituted by succinimido by lithiation of nacnacBnH followed by reaction with N-chlorosuccinimide (3-succinimido-nacnacBnH). N-aryl ligands nacnacippH and nacnacNaphH (ipp = 2-isopropylphenyl, Naph = 1-naphthyl) were prepared from literature. The ligands were reacted with Zn(TMSA)2 (TMSA = N(SiMe3)2) to yield nacnacAnZn(TMSA) and ClnacnacBnZn(TMSA). Protonation with isopropanol gave nacnacAnZnOiPr and ClnacnacBnZnOiPr. Reaction of the diketimines with Mg(TMSA)2 afforded nacnacAnMg(TMSA), nacnacMesMg(TMSA), ClnacnacBnMg(TMSA) and ClnacnacAnMg(TMSA). Subsequent protonation with tert-butanol produced nacnacMesMgOtBu and ClnacnacBnMgOtBu, but only decomposition was observed with N-anthrylmethyl substituents. Reaction of the diketimines with Cu(OiPr)2 yielded the heteroleptic [nacnacBnCu(μ-OiPr)]2 and [3-Cl-nacnacBnCu(μ-OiPr)]2 when using sterically undemanding ligands. When sterically more demanding diketimines were used, stabilization of the heteroleptic complex by dimerization was not possible, resulting in the formation of the homoleptic complexes Cu(nacnacipp)2 and Cu(nacnacNaph)2 by ligand exchange. Homoleptic complexes were also prepared with N-benzyl ligands, i. e. Cu(nacnacBn)2 and Cu(3-succinimido-nacnacBn)2. Even bulkier ligands such as nacnacAnH, nacnacMesH or N-methylbenzyl substituents failed to react with Cu(OiPr)2. Most complexes were characterized by single crystal X-ray diffraction. TMSA complexes and homoleptic complexes were monomeric, alkoxide complexes were dimeric in the solid state. All alkoxide complexes, as well as nacnacAnMg(TMSA)/BnOH and ClnacnacAnMg(TMSA)/BnOH were moderately to highly active in rac-lactide polymerization (90% conversion in 30 sec to 3 h). nacnacAnZnOiPr produced highly heterotactic polymer (Pr = 0.90), ClnacnacBnMgOtBu/BnOH produced slightly isotactic polymer at –30 °C (Pr = 0.43), all other catalysts produced atactic polymers with a slight heterotactic bias (Pr = 0.48 – 0.55). Heteroleptic complexes [nacnacBnCu(μ-OiPr)]2 and [3-Cl-nacnacBnCu(μ-OiPr)]2 are very highly active rac-lactide polymerization catalysts, with complete monomer conversion at ambient temperature in solution in 0.5 – 5 min. [nacnacBnCu(μ-OiPr)]2 specifically polymerized in the presence or absence of isopropanol as a chain-transfer reagent with very high activity (k2 = 32 M–1•s–1), in methylene chloride. While in acetonitrile, THF, dichloromethane and toluene has a kobs = 2.4(1), 5.3(5), 3.6-4.4 and 10(1) min–1, respectively. [nacnacBnCu(μ-OiPr)]2 yields narrow polydispersities and no evidence of side reactions such as transesterification, epimerization or catalyst decomposition. The homoleptic complexes in the presence of free alcohol, seem to be in equilibrium with small amounts of the respective heteroleptic complex, which are sufficient to complete polymerization in less than 60 min at room temperature. All Cu catalysts show high control of polymerization with polydispersities of 1.1 and below. The obtained polymers were essentially atactic, with a slight heterotactic bias at ambient temperature and at –17 °C. [nacnacBnCu(μ-OiPr)]2 polymerizes -butyrolactone (BL), -caprolactone (CL) and -valerolactone (VL) with rate constants of kobs = 3.0(1)•10–2, 1.2–2.7•10–2, and 0.11(1) min–1, respectively. Homopolymers showed narrow polydispersities of appr. 1.1. Sequential addition polymerizations showed evidence for transesterification (not seen in homopolymerizations) if BL or CL are introduced after a lactide block.

Um dos principais resíduos gerados nos aterros é o lixiviado, que possui elevada concentração de matéria orgânica biodegradável e refratária e de matéria inorgânica, como nitrogênio amoniacal e metais pesados. O tratamento combinado de lixiviado com esgoto sanitário tem sido utilizado em algumas estações de tratamento de esgoto (ETE) brasileiras. No entanto, o processo ainda sofre vários questionamentos e incertezas, especialmente sobre os efeitos da adição do lixiviado sobre o sistema de tratamento. Nesse contexto, o presente trabalho visou avaliar a eficiência do tratamento combinado de lixiviado/esgoto em sistema de lodos ativados, em diferentes condições. Na primeira etapa desta pesquisa, foram realizados experimentos de tratabilidade em escala de bancada (regime de batelada) utilizando as proporções volumétricas de 0% (controle), 0,2%, 2% e 5% de lixiviado em diferentes condições experimentais. Dentre eles, o Experimento 2 (lixiviado pré-tratado por alcalinização e air stripping) se mostrou mais viável tecnicamente, alcançando eficiências de remoção da DBO, da DQO e do COD acima de 97, 82, 60%, respectivamente, até a proporção de 2% de lixiviado pré-tratado. Na segunda etapa da pesquisa, foi avaliada a tratabilidade utilizando reatores em escala piloto (regime contínuo) tratando esgoto sanitário com 2% (P1) e 0% (P2-controle) de lixiviado pré-tratado, com relação microrganismo-alimento de 0,22 kgDBO/kgSSV.dia, tempo de detenção hidráulica de 24 horas e idade do lodo de 20 dias. Os resultados indicaram viabilidade do tratamento nas condições estudadas com 2% de lixiviado pré-tratado, cujas eficiências médias de remoção da DBO, da DQO, do COD foram de 93, 84 e 60%, respectivamente. Esta pesquisa foi desenvolvida com apoio financeiro (Processo N° 2010/51955-2) da Fundação de Amparo à Pesquisa de São Paulo (FAPESP). / The leachate is one of the main wastes generated in landfills, it has a high concentration of biodegradable and refractory organic matter and inorganic matter, such as ammonia and heavy metals. The combined treatment of leachate with sewage has been used in various sewage treatment plants in Brazil. However, there are still many questions and uncertainties about the process, especially the effects of adding leachate on the treatment system. In this context, this study aimed at evaluating the efficiency of combined treatment of leachate/sewage in activated sludge under different conditions. In the first stage of this research, treatability experiments were carried out in a bench scale (SBR) using the volumetric proportions of 0% (control), 0.2%, 2% and 5% leachate under different experimental conditions. The Experiment 2 (leachate pretreated by alkalinization and air stripping) was more technically feasible, achieving efficiencies of removal of BOD, COD and DOC above 97, 82, 60%, respectively, until the proportion of 2% pre-treated leachate. In the second stage of the research was evaluated the treatability using pilot-scale reactors (continuous flow) for sewage treatment with 2% (P1) and 0% (P2-control) leachate pretreated. The operational parameters adopted were food-microorganism rate of 0.22 kgDBO/ kgSSV.d, hydraulic retention time of 24 hours and the sludge retention time of 20 days. The results indicated the viability of the combined treatment with 2% leached pretreated, whose average efficiency of removing BOD, COD, DOC were 93, 84 and 60% respectively. This research was developed with financial support (case No. 2010/2-51955) of Fundação de Amparo à Pesquisa de São Paulo (FAPESP).

Les petites protéines G de la famille Rho sont des régulateurs importants de la fonction cellulaire. Elles lient les signaux extracellulaires à l'activation de diverses voies de signalisation telles que celles menant à la phagocytose, la mitogénèse, l'adhésion cellulaire, l'expression génique, Toutefois leur fonction principale est l'assemblage et l'organisation du cytosquelette d'actine. Ces GTPases fonctionnent comme des interrupteurs moléculaires, actifs lorsque liés au GTP et inactifs sous la forme liée au GDP. <p><p>Le but de notre thèse est d'investiguer, dans les cellules thyroïdiennes de chien en culture primaire, l'implication des protéines de la famille Rho et de l'organisation du cytosquelette d'actine dans les actions diverses que la TSH exerce, via l'AMPc, sur la morphologie, la prolifération, la différenciation et la fonction des thyrocytes de chien en culture primaire.<p><p>Trois cascades conduisant à la mitogénèse coexistent dans la cellule thyroïdienne de chien: la voie de l'AMPc stimulée par la TSH ou la forskoline (activateur direct de l'adénylate cyclase), la voie des facteurs de croissance (tels que l'EGF, l'HGF) activant leur récepteur à activité tyrosine kinase et la cascade dépendante de la protéine kinase C activée par les esters de phorbol (TPA). Contrairement aux voies indépendantes de l'AMPc qui répriment l'expression des caractéristiques de différenciation, la cascade de l'AMPc stimule à la fois la prolifération, l'expression des gènes de l'état différencié et la fonction (iodation, formation d'H2O2, sécrétion hormonale).<p><p>Dans la cellule thyroïdienne de chien, les agents activant les cascades dépendantes et indépendantes de l'AMPc ont des effets différents sur l'organisation du cytosquelette d'actine. La TSH/AMPc et le TPA induisent une destruction des microfilaments d'actine et un "ruffling" membranaire, tandis que les autres agents (insuline, EGF, HGF, sérum) ne modifient pas le réseau de fibres d'actine (fibres de stress) présent dans les cellules quiescentes.<p><p>Parmi les protéines de la famille Rho, RhoA, Rac1 et Cdc42 sont les premières à avoir été identifiées et sont actuellement les mieux caractérisées. Nous montrons que la TSH, via l'AMPc, induit une diminution de la concentration de la forme active des protéines Rac1, Cdc42 et RhoA. En revanche, les autres agents mitogènes, tels que l'EGF et le TPA, qui activent des voies indépendantes de l'AMPc, n'affectent pas les taux de Rac1 et Cdc42 activés, mais augmentent le taux de RhoA-GTP. L'activation ou l'inactivation des protéines RhoA, Rac1 et Cdc42 est donc un nouvel élément distinguant les voies dépendantes et indépendantes de l'AMPc.<p><p>Grâce à deux toxines bactériennes, la toxine B qui inactive les protéines Rho et la toxine CNF1 qui au contraire les active, nous montrons que, dans les thyrocytes, celles-ci jouent un rôle critique dans l'organisation du cytosquelette, dans la transition G1-S, dans l'expression des gènes de différenciation Tg, ThOXs, NIS et TPO, mais pas dans la génération d'H2O2. <p><p>En effet, l'activité d'un ou plusieurs membres de cette famille est nécessaire à l'entrée des thyrocytes en phase S et à la phosphorylation de la protéine pRb, étape pré-requise à la transition G1-S. L'activation de ces protéines n'induit cependant pas, à elle seule, la prolifération. Nous mettons également en évidence l'existence d'un nouveau mécanisme par lequel ces protéines contrôleraient l'activité des complexes cycline D3-CDK4 indépendamment de leur assemblage. Par l'utilisation de la dihydrocytochalasine B, qui comme la toxine B via l'inactivation des Rhos, désorganise le cytosquelette, nous démontrons que l'intégrité de celui-ci n'est pas requise pour la progression des thyrocytes en phases G1 et S. L'inactivation des protéines Rho est par contre nécessaire à l'induction, par l'AMPc, de l'expression des gènes de différenciation incluant Tg, ThOXs, NIS et TPO, puisque ce processus est inhibé par la toxine CNF1. De plus, l'inactivation des Rhos par la toxine B, ainsi que le désassemblage des fibres de stress et du cytosquelette induit par la dihydrocytochalasine B, suffisent à imiter l'induction dépendante de l'AMPc de Tg et ThOXs, mais pas de NIS et TPO. La toxine B et la dihydrocytochalasine B imitent aussi l’effet de la voie TSH/AMPc sur l’accumulation de p27kip1. Enfin, nous montrons que l'augmentation de la production d'H2O2, nécessaire à la synthèse des hormones thyroïdiennes, ne requiert pas l'activité de la protéine Rac (ni des autres protéines de la famille Rho) alors que celle-ci joue un rôle déterminant dans la génération d'H2O2 dans le leucocyte. <p> / Doctorat en sciences, Spécialisation biologie moléculaire / info:eu-repo/semantics/nonPublished

This diploma thesis deals with the analysis of the intake system of a turbocharged Formu-la Student combustion engine. The thesis contains a brief description of the intake system of a passenger vehicle and the intake system of a Formula Student vehicle. Part of the work is the design of an electronic throttle. The type of throttle valve was selected based on a research of individual types used nowadays. Furthermore, simulations of the flow of the air through the intake system are performed and the results are used in the design cal-culations.

Abiotic and biotic stresses lead to crop yield losses and ultimately negatively affect agriculture production. Elucidation of the mechanisms of plant stress responses and their regulation could help to understand plant defence and improve stress tolerance. Phytohormones stand behind both plant growth and developmental changes as well as stress signalling. This thesis summarises the results published in two articles focused on phytohormone dynamics in response to abiotic and biotic stresses, namely phosphate shortage and Plasmodiophora brassicae infection. A review article focuses in depth on strigolactones as master regulators of phosphate deficiency responses. The main emphasis is put on organ-specific reactions and exogenous phytohormone treatment with the potential to convey stress tolerance. In the case of phosphate shortage, the universal reaction in all organs was a decrease in active cytokinin trans-zeatin and gibberellin GA4 with a concurrent elevation of abscisic acid. Also, the high- affinity phosphate transporters (PHT1;4 and PHT1;7) exhibited increased gene expression within the whole plant. Shoot apical meristems showed numerous changes in gene expression and were the most affected organ during the lack of phosphate. Only in roots, we observed a substantial elevation of low active...

No description available.

No description available.

這篇研究是依據中國過去十數年空調器成長數量為dependent variables，用回歸分析找出這段期間各項經濟指標中與空調器成長有相關性者為independent factors，所產生的數學模式用來預測中國在2020欲達成小康社會目標時空調器數量。這個分析的應用是依照大陸現行空調器EER值推算2020電力的尖峰負荷，因為空調是造成尖峰負荷主因，所以推論如果將空調器耗能標準提高20%，可以省下3.6個三峽水力發電的裝置容量(18GWx3.6)。也就是大陸供電裝置容量從現在的400GW，增長到2020的900~1000GW時，可節省66GW的裝置容量。 / Chinese market opened to the world since the establishment of Shenzhen Special Economic Zone (SEC) in 1978. Its economic growth starts taking off from 1992 when the 2nd SEC at Shanghai was established. China’s yearly Gross Domestic Products (GDP) growth exceeds 9% on average since then. The trend continued after China entered World Trade Organization (WTO) in 2001. Their GDP reached Rmb18.232 trillions in 2005. Behind the magnificent growth, is the enormous amount of energy and nature resource consumption, thus lead to the environment damage. In 2003, China announced its plan to build a harmonious society (or well-off society or xiao-kang in mandarin) by 2020. This plan outlined the standard of living for the future Chinese. It will be a society composed mainly by the middle class, with a projected 1.5 billion total population, of which 60% will live in the urban area. GDP will grow to 4 times of what it was at 2000; which will make China the third largest economic in the world. However, can China sustain the growth? Is the supply of energy and resource unlimited? Can the rest of the world afford a developed country with 1.5 billion populations without the shortage of nature resource shortage elsewhere? This study reviewed China’s residential and light commercial unitary air conditioning market growth trend from 1995 to 2005. This segment represents 85%~90% of the total Chinese market. The study used several business forecasting methods, to develop a model for estimating the room air conditioner (RAC) and package air conditioner (PAC) market growth till 2020, by considering various social and economical factors such as GDP growth, construction of new buildings, disposal income (DPI) and retail price changes. The forecast can be used to estimate the peak time electrical power demand with the Energy Efficiency Ratio (EER: rated Cooling Capacity in Watt / Power Input in Watt) of RAC and PAC required by the code. Our study found that China should impose a much more stringent EER code in order to reduce peak electrical power demand and avoid supply shortage during the summer, since the economy is predicted to continue to outgrow the power supply. The alternative is to build more new power plant only to meet the summer peak load, while most other time of the year the plants may stay idle. According to Asia Pacific Economics Cooperation, Energy Standard Information System (APEC ESIS) current China EER requirement is around 25% below Taiwan, and most developed countries. Japan Air Conditioning Journal (JARN) and Building Services Research and Information Association from UK (BSRIA) reported that the size of China’s air conditioning market size exceeded Japan in 2003 to become the world second largest in the world, after only the United States. China now manufactures more mini split than any other places in the world. There should be no technical difficulty to adopt the more stringent code to help reducing the peak load demand from air conditioning, since most advance technologies are now available to the market and local manufacturers. Some Chinese air conditioning manufacturers already have a capacity surplus. Exporting their products to the developed countries such as the US and Japan, will require them to meet the EER code of the country of destination. This may speed up the introduction of higher EER design products in the local Chinese market.