Thesis (M.App.Sc.) - Carleton University, 2007. / Includes bibliographical references (p. 112-118). Also available in electronic format on the Internet.

Ο σχεδιασμός αναλογικών κυκλωμάτων σε υψηλές συχνότητες είναι αδιαμφισβήτητα μία από τις σημαντικότερες εφαρμογές στον τομέα των ηλεκτρονικών. Οι προκλήσεις που καλείται να αντιμετωπίσει ο σχεδιαστής είναι πολλές και σημαντικές, καθώς τα κυκλώματα μικραίνουν σε μέγεθος και είναι απαραίτητο να δημιουργηθούν νέα μοντέλα περιγραφής των στοιχείων ολοκληρωμένων κυκλωμάτων. Παράλληλα, τα παρασιτικά φαινόμενα που επεισέρχονται στον σχεδιασμό των αναλογικών κυκλωμάτων δημιουργούν πολλές φορές trade – off μεταξύ των διαφόρων σχεδιαστικών απαιτήσεων που πρέπει να ικανοποιηθούν. Στα πλαίσια της παρούσας διπλωματικής, επικεντρώνομαι στη μελέτη και στο σχεδιασμό ταλαντωτών ελέγχομενων από τάση (VCOs). Πιο συγκεκριμένα, μελετώ τα χαρακτηριστικά δύο κατηγοριών των ταλαντωτών αυτών : των ταλαντωτών L-C και των ταλαντωτών δακτυλίου (ring). Αρχικά δίνω μία γενική περιγραφή των ταλαντωτών και των μοντέλων περιγραφής τους. Στη συνέχεια αναλύω τις πηγές θορύβου στα ολοκληρωμένα κυκλώματα και δίνω έμφαση στη θεωρία θορύβου φάσης, παρουσιάζοντας μοντέλα περιγραφής του. Στη συνέχεια, παρουσιάζω τη σχεδίαση ταλαντωτών L – C και ring, δίνοντας και τα αποτελέσματα εξομοιώσεων. Τέλος, εκτός από τα συμπεράσματα που βγαίνουν μέσω των εξομοιώσεων, γίνεται και σύγκριση μεταξύ των δύο κατηγοριών ταλαντωτών. / The design of analog circuits operating at high frequencies is undoubtedly one of the most important applications in the field of electronics. The challenges that the designer needs to face are many and important, as the circuits become smaller and smaller and is imperative that new models need to be made that describe the operation of the transistors. Furthermore, the parasitics that are inherent in any analog design create a trade – off between several design specifications that need to be satisfied. In this work I emphasize on the study and design of voltage controlled oscillators (VCOs). More specifically, I study the characteristics of two major categories of such oscillators: L-C oscillators and ring oscillators. At start, I present a general description of oscillators and the models that describe their operation. Next, I analyze the various noise sources in analog integrated circuits and I emphasize on phase noise theory, by presenting its models. In the fourth and fifth chapter, I show the design of L – C and ring oscillators, while I give the results of the simulations. Finally, apart from the conclusion drawn from the simulations, I make a comparison between the two oscillators’ categories.

Thesis (MScEng)--Stellenbosch University, 2012. / ENGLISH ABSTRACT: This thesis describes the design and construction of a two-element digital correlation interferometer operating at 1.42 GHz. This instrument consists of two 92cm off set-parabolic reflectors arranged in an east-west baseline, with a maximum length of 24m. The reflectors are out-fi tted with helical beam antennas as primary feeds, and are further equipped with low-noise front-ends. A wideband dual-conversion superheterodyne receiver processes the astronomical signals before digitisation. The receiver is implemented as far as possible using a ffordable off -the-shelf technologies. The cross-correlation between the two antenna signals is measured using a 256MHz bandwidth digital FX correlator, and is implemented on a Reconfi gurable Open Architecture for Computing Hardware (ROACH) board. The preliminary observations made with this interferometer, suggests that it is possible to detect the sun, and some other much weaker sources such as Taurus A. The design of an interferometer in general is presented, from the formulation of the underlying instrumental requirements, to making meridian drift scan observations. The interferometer developed may serve as a demonstrator for other engineering students to gain a working knowledge of radio interferometry, which should prove invaluable when addressing the challenges the Square Kilometre Array (SKA) is faced with. / AFRIKAANSE OPSOMMING: In hierdie tesis word die ontwerp en konstruksie van 'n twee-element digitale korrelasie interferometer wat by 1.42 GHz ontvang beskryf. Die instrument bestaan uit twee 92 cm afsetparaboliese re ektorantennas met 'n oos-wes basislyn, met maksimum lengte 24 m. Heliese antennas word gebruik as primêre voer vir die reflektors, en verder maak die voorent gebruik van laeruis versterkers . Die wyeband superheterodineontvanger verwerk die astronomiese seine in twee stappe voordat dit digitaliseer word. Bekostigbare kommersiëele komponente word gebruik in die vervaardiging van die ontvanger. Die kruiskorrelasie tussen die twee antenna seine word digitaal gemeet deur 'n FX korreleerder met 'n 256MHz bandwydte op 'n ROACH bord. Die resultate toon aan dat dit moontlik is om die son waar te neem, sowel as sommige ander swakker bronne, soos Taurus A. Al die kwessies insluitende die instrumentale vereistes betrokke by die ontwerp van 'n interferometer word bespreek. Verder word die gebruik van interferometers om meridiaan meetings te doen bespreek. Die interferometer dien as 'n praktiese demonstrasie van radio interferometrie vir ingenieurstudente. Hierdie demonstrasie is voordelig vir studente om die uitdagings van die SKA te bestudeer.

Este estudo consiste na comparação de 2 técnicas de modelagem da área de identificação de sistemas aplicadas à predição de dois importantes parâmetros elétricos de um cabo de telecomunicação do tipo LAN, que são Atenuação e Resíduo de Telediafônia. O foco do trabalho é representar a relação existente entre duas maneiras distintas de efetuar a medição dessas grandezas em um cabo. O estudo se iniciou através da aplicação de técnicas de modelagem que buscam Modelos Paramétricos, através da comparação polinomial, baseadas nas respostas dos modelos para os critérios de Akaike, Bestfits e Análise dos resíduos. Na seqüência, a fim de investigar o comportamento não-linear dos parâmetros do cabo em estudo, desenvolveram-se modelos baseados em Redes Neurais Artificiais. Estas redes são técnicas de inteligência artificial, inspiradas na natureza e capazes de identificar padrões e inferir conhecimentos, realizando comparações entre a saída real e a gerada pelo modelo. Utilizaram-se os toolboxes de identificação de sistemas e de redes neurais disponíveis no software Matlab, para desenvolvimento dos modelos. Com estes, neste trabalho foram apresentados os principais conceitos envolvidos em modelagem utilizando modelos paramétricos e redes neurais artificiais. Por fim, são apresentadas comparações entre os resultados obtidos com os respectivos critérios adotados e as técnicas utilizadas apontando para suas virtudes e limitações na solução deste problema. Essas comparações são feitas baseando-se em resultados obtidos para os modelos propostos a partir de dados reais obtidos em testes de qualidade de cabos LAN. / This study consists of a comparison between two system identification modeling techniques applied to predict two important performance parameter involved on a LAN telecommunication cable, which are Insertion Loss and Attenuation Crosstalk Ratio Far End. This work focused on representing the relation between two different ways of measuring a cable by modeling techniques using Parametric Models, which are based on techniques of polynomial comparison performing output models comparison considering Akaike, Bestfit and Residuals analyses criteria and in sequence the Artificial Neural Network, which is an artificial intelligence technique inspired on nature that can identify standards and knowledge, performing a comparison between the real output and the model output. All of that using the Matlab system identification and neural networks toolboxes. On this work were presented the main concepts involved on modeling using parametric models and Neural Networks and was performed a comparison between the obtained results with the adopted criteria and the applied techniques pointing to each advantage and disadvantage for the solution of this problem.

Sewer and oil pipeline spillage issues have become major causes of pollution in urban and rural areas usually caused by blockages in the water storage and drainage system, and oil spillage of underground oil pipelines. An effective way of avoiding this problem will be by deploying some mechanism to monitor these installations at each point in time and reporting unusual liquid activity to the relevant authorities for prompt action to avoid a flooding or spillage occurrence. This research work presents a low cost energy efficient liquid level monitoring technique using Radio Frequency Identification Technology. Passive UHF RFID tags have been designed, modelled and optimized. A simple rectangular tag, the P-shaped tag and S-shaped tag with UHF band frequency of operation (850-950 MHz) has been designed and modelled. Detailed parametric analysis of the rectangular tag is made and the optimised design results analysed and presented in HFSS and Matlab. The optimised rectangular tag designs are then deployed as level sensors in a gully pot. Identical tags were deployed to detect 4 distinct levels in alternate positions and a few inches in seperation distance within the gully pot height (Low, Mid, High and Ultra high). The radiation characteristic of tag sensors in deployment as modelled on HFSS is observed to show consistent performance with application requirements. An in-manhole chamber antenna for an underground communication system is analysed, designed, deployed and measured. The antenna covers dual-band impedance bandwidths (i.e. 824 to 960 MHz, and 1710 to 2170 MHz). The results show that the antenna prototype exhibits sufficient impedance bandwidth, suitable radiation characteristics, and adequate gains for the required underground wireless sensor applications. Finally, a Linearly Shifted Quadrifilar Helical Antenna (LSQHA) designed using Genetic Algorithm optimisation technique for adoption as an RFID reader antenna is proposed and investigated. The new antenna confirms coverage of the RFID bandwidth 860-960 MHz with acceptable power gain of 13.1 dBi.

PINTO, Fabrício Alves. Medição da evaporação em tanques classe a instalados em ambientes aquático e terrestre. 2009. 58 f. : Dissertação (mestrado) - Universidade Federal do Ceará, Centro de Ciências Agrárias, Departamento de Engenharia Agrícola, Programa de Pós-Graduação em Engenharia Agrícola, Fortaleza-CE, 2009. / Submitted by demia Maia (demiamlm@gmail.com) on 2016-06-28T14:11:39Z No. of bitstreams: 1 2009_dis_fapinto.pdf: 1378262 bytes, checksum: 2dae07ff31ce2b3fa2226128d976ce5d (MD5) / Approved for entry into archive by demia Maia (demiamlm@gmail.com) on 2016-06-28T14:12:14Z (GMT) No. of bitstreams: 1 2009_dis_fapinto.pdf: 1378262 bytes, checksum: 2dae07ff31ce2b3fa2226128d976ce5d (MD5) / Made available in DSpace on 2016-06-28T14:12:14Z (GMT). No. of bitstreams: 1 2009_dis_fapinto.pdf: 1378262 bytes, checksum: 2dae07ff31ce2b3fa2226128d976ce5d (MD5) Previous issue date: 2009 / The main objective of this research was to compare evaporation measured in two Class A evaporation pans. The first one installed 15 cm over the surface and the second one installed at surface level in a small reservoir. The experiment was carried out at the Fisheries Station of the Federal University of Ceará, in Fortaleza. An automated weather station was installed at the same site. During February to November of 2008, evaporation data were measured in a daily basis. The weather data were collected in a weekly basis using a radio frequency system. The evaporation measured at a soil surface was 5.3% higher than the evaporation measured at a water surface level of the reservoir. The different installation conditions were influenced differently by the weather parameters. The evaporation estimation methods of Penman, Linsley and Linacre underestimated the evaporation measured in the reservoir, and the Penman method presented the smaller error / As condições climáticas das regiões semi-áridas favorecem a evaporação que representa a maior perda do volume líquido dos açudes, portanto, um parâmetro importante para o gerenciamento dos recursos hídricos. Um dos instrumentos mais difundidos e utilizados para estimar a evaporação em reservatórios é o Tanque Classe A. Assim, este trabalho teve como objetivo principal comparar a evaporação medida em dois tanques Classe A, sendo um instalado em ambiente aquático e outro em ambiente terrestre, e como objetivo secundário avaliar estimativas da evaporação obtidas pelos métodos propostos por Penman (1948), Linsley (1982) e Linacre (1993) em relação às medidas de evaporação obtidas nos referidos tanques evaporimétricos. O experimento foi conduzido na Estação de Piscicultura do Centro de Ciências Agrárias da Universidade Federal do Ceará, em Fortaleza, CE. Neste local, além dos tanques Classe A, foi instalada uma estação meteorológica automática. No período de fevereiro a novembro de 2008 foram realizadas medidas diárias de evaporação e coletados, semanalmente, os dados meteorológicos armazenados no sistema de aquisição da estação, utilizando rádio freqüência. O total evaporado no tanque Classe A instalado em ambiente terrestre foi 5,3% superior ao total evaporado no tanque Classe A em ambiente aquático. A instalação do tanque Classe A em ambiente aquático reduziu os efeitos diretos da radiação solar incidente, umidade relativa, temperatura do ar e velocidade do vento sobre a evaporação assim com a amplitude térmica da água no seu interior. O método proposto por Penman (1948) apresentou os melhores desempenhos, com erros relativos de -3,0% em relação ao tanque Classe A no ambiente aquático e -7,9% em relação ao tanque Classe A no ambiente terrestre.

Os requisitos de linearidade e ruído em aplicações multi-banda e multi-protocolo fazem que o projeto de misturadores RF seja uma tarefa muito desafiadora. Nesta dissertação dois misturadores com base na topologia célula de Gilbert são propostas. Linearidade e ruído foram as principais figuras de mérito consideradas para o misturadores propostos. Para aumento linearidade, foi utilizada uma técnica de cancelamento de harmônicas pós-distorção (PDHC). E, para redução de ruído, foi utilizado um circuito de redução dinâmica de corrente combinada com um filtro LC sintonizado na frequência do LO e cancelamento de ruído térmico. A análise por séries Volterra do estágio transcondutância do misturador proposto é reportada para mostrar a eficácia da técnica de cancelamento de harmônicos com pósdistorção. O circuito de linearização adicionado não aumenta o tamanho do misturador, nem degrada ganho de conversão, figura de ruído, ou consumo de potência. Simulações elétricas foram realizadas em nível de pós-layout para a primeira topologia e nível esquemático para a segunda topologia, usando processo CMOS de 0.13 mm da IBM. As melhorias em IIP2 e IIP3 são apresentadas em comparação com o misturador do tipo célula de Gilbert convencional. Para a primeira topologia, foi obtido um ganho de conversão de 10.2 dB com uma NF de 12 dB para o misturador projetado funcionando a 2 GHz, com uma frequência intermediária de 500 kHz. E um IIP2 e IIP3 de 55 dBm e 10.9 dBm, respectivamente, consumindo apenas 5.3 mW de uma fonte de 1.2 V. Para a segunda topologia, foram obtidos um ganho de conversão de [13.8 ~11] dB, um coeficiente de reflexão na entrada (S11) de [-18 ~-9.5] dB e um NF de [8.5 ~11] dB no intervalo de 1 a 6 GHz. Para as especificações de linearidade, um valor médio de IIP3 de 0 dBm foi alcançado para toda a faixa de frequência, consumindo 19.3 mW a partir de uma fonte de 1.2 V. Especificações adequadas para operação multi-banda e multi-protocolo. / The linearity and noise requirements in multi-band multi-standard applications make the design of RF CMOS mixers a very challenging task. In this dissertation two downconversion mixers based on the Gilbert-cell topology are proposed. Linearity and noise were the principal figures of merit for the proposed mixers. For linearity improvement, post distortion harmonic cancellation (PDHC) was employed. And, for noise reduction, dynamic current injection combined with an LC filter tuned at the LO frequency and thermal-noise cancellation were used. A Volterra series analysis of the transconductance stage is reported to show the effectiveness of the post-distortion harmonic cancellation technique. The added linearization circuitry does not increase the size of the mixer, nor does it degrade conversion gain, noise figure, or power consumption. Electrical simulations were performed on extracted layout level from the first topology and schematic level from the second topology. Using an IBM 0.13 mm CMOS process improvements on IIP3 and IIP2 in comparison to the conventional Gilbert-cell mixer are demonstrated. For the first topology, we achieved a conversion gain of 10.2 dB with a NF of 12 dB for the designed mixer working at 2 GHz, with a low-IF of 500 kHz and an IIP2 and IIP3 of 55 dBm and 10.9 dBm, respectively, while consuming only 5.3 mW from a 1.2 V supply. For the second topology, we achieved a conversion gain range of [13.8 ~11] dB, an input reflection coefficient (S11) of [-18 ~-9.5] dB and a NF of [8.5 ~11] dB in the frequency range of 1 to 6 GHz. For the linearity specs, an IIP3 of 0 dBm was achieved for the whole frequency range, while consuming 19.3 mW from a 1.2 V supply, making the second topology well suited for multi-band and multi-standard operation.

Um novo circuito amplificador de 50 MHz - 1 GHz com alta linearidade para o padrão IEEE 802.22 “wireless regional area” (WRAN) é apresentado. Ele foi implementado sem nenhum indutor e oferece uma saída diferencial para ser utilizada como balun. Técnicas de cancelamento de ruído e aumento de linearidade foram usadas para melhorar a performace do amplificador de modo que eles pudessem ser otimizados separadamente. A linearidade foi melhorada utilizando transistores conectados como diodo. O amplificador foi implementado em um processo CMOS 130 nm, em uma área compacta de 136 m x 71 m. As simulações são apresentadas para esquemáticos pós-leiaute para duas classes diferentes de projeto: um visando a melhor linearidade e o outro a melhor Figura de Ruído (FR). Quando otimizado para melhor linearidade, os resultados de simulação atingem um ganho de tensão > 23.7 dB (ganho de potência > 19.1 dB), uma figura de ruído < 3.6 dB na banda inteira (com 2.4 dB min), um ponto de intersecção de terceira ordem (IIP3) > 3.3 dBm (7.6 dBm max) e um coeficiente de reflexão de entrada S11 < -16 dB. Quando otimizado para melhor figura de ruído, ele atinge um ganho de tensão > 24.7 dB (ganho de potência > 19.8 dB), uma FR < 2 dB na banda inteira, um IIP3 > -0.3 dBm e um S11 < -11 dB. Resultados de simulação Monte Carlo confirmam baixa sensibilidade à variabilidade de processo. Além disso, uma baixa sensibilidade com a temperatura na faixa de -55 até 125 C foi observada para Ganho, FR e S11. Consumo de potência é 17.6 mA sob fonte de alimentação de 1.2 V. / A new 50 MHz - 1 GHz low-noise amplifier circuit with high linearity for IEEE 802.22 wireless regional area network (WRAN) is presented. It was implemented without any inductor and offers a differential output for balun use. Noise cancelling and linearity boosting techniques were used to improve the amplifier performance in a way they can be separately optimized. Linearity was improved using diode-connected transistors. The amplifier was implemented in a 130 nm CMOS process in a compact 136 m x 71 m area. Simulations are presented for post-layout schematics for two classes of design: one for best linearity, another for best noise figure (NF). When optimized for best linearity, simulation results achieve a voltage gain > 23.7 dB (power gain > 19.1 dB), a NF < 3.6 dB over the entire band (with 2.4 dB min figure), an input third-order intercept point (IIP3) > 3.3 dBm (7.6 dBm max.) and an input power reflection coefficient S11 < -16 dB. When optimized for best NF, it achieves a voltage gain > 24.7 dB (power gain > 19.8 dB), a NF < 2 dB over the entire band, an IIP3 > -0.3 dBm and an S11 < -11 dB. Monte Carlo simulation results confirm low sensitivity to process variations. Also a low sensitivity to temperature within the range -55 to 125 C was observed for Gain, NF and S11. Power consumption is 17.6 mA under a 1.2 V supply.

abstract: The ability to monitor electrophysiological signals from the sentient brain is requisite to decipher its enormously complex workings and initiate remedial solutions for the vast amount of neurologically-based disorders. Despite immense advancements in creating a variety of instruments to record signals from the brain, the translation of such neurorecording instrumentation to real clinical domains places heavy demands on their safety and reliability, both of which are not entirely portrayed by presently existing implantable recording solutions. In an attempt to lower these barriers, alternative wireless radar backscattering techniques are proposed to render the technical burdens of the implant chip to entirely passive neurorecording processes that transpire in the absence of formal integrated power sources or powering schemes along with any active circuitry. These radar-like wireless backscattering mechanisms are used to conceive of fully passive neurorecording operations of an implantable microsystem. The fully passive device potentially manifests inherent advantages over current wireless implantable and wired recording systems: negligible heat dissipation to reduce risks of brain tissue damage and minimal circuitry for long term reliability as a chronic implant. Fully passive neurorecording operations are realized via intrinsic nonlinear mixing properties of the varactor diode. These mixing and recording operations are directly activated by wirelessly interrogating the fully passive device with a microwave carrier signal. This fundamental carrier signal, acquired by the implant antenna, mixes through the varactor diode along with the internal targeted neuropotential brain signals to produce higher frequency harmonics containing the targeted neuropotential signals. These harmonics are backscattered wirelessly to the external interrogator that retrieves and recovers the original neuropotential brain signal. The passive approach removes the need for internal power sources and may alleviate heat trauma and reliability issues that limit practical implementation of existing implantable neurorecorders. / Dissertation/Thesis / Doctoral Dissertation Electrical Engineering 2014

L’objectif de ce travail est d’aborder la conception de réseaux d’adaptation d’impédance accordable (RAA) dans deux contextes bien distincts en radiofréquences : le RAA en faible signal et le RAA en fort signal.Concernant les aspects faible signal, des critères de performance de RAA ont été établis et étudiés. Une nouvelle expression générale de l’efficacité d’un RAA a été développée. Elle permet de prédire le rendement d’un RAA à partir des facteurs de qualité des composants dont on dispose dans une technologie donnée et du rapport de transformation à réaliser. Des abaques de couverture d’impédances en fonction des pertes d’insertion ont été calculés. Ils mettent en évidence les régions de couverture où le RAA apporte une amélioration à la performance du système, pour diverses topologies de RAA.Un démonstrateur sur PCB a été réalisé. Il est constitué de deux RAA, qui assurent l’adaptation simultanée d’un amplificateur de puissance sur une large plage d’impédances, comprises dans un cercle de l’abaque de Smith d’équation VSWR < 5 :1. La zone de couverture a été mesurée et présentée en fonction des pertes d’insertion, qui mettent en évidence les régions où les RAA contribuent à l’amélioration de la performance de l’amplificateur et celles où les pertes d’insertion du RAA n’arrivent pas à compenser le gain du à la réduction des coefficients de réflexion.Dans une seconde partie, la conception de RAA en fort signal a été traitée. L’objectif a été de présenter à la sortie d’un amplificateur de puissance les impédances qui optimisent son efficacité pour chaque puissance de travail. Un démonstrateur en technologie CMOS SOI 130 nm a été conçu et simulé. Il consiste en un amplificateur de puissance pour le standard WCDMA, fonctionnant à 900 MHz, et un RA accordable par des varactors MOS, capable de générer les impédances optimales correspondant à des puissances de sortie comprises entre 20 et 30 dBm. Les résultats ont mis en évidence le bénéfice apporté par l’insertion d’un RA accordable par rapport à un RA fixe. / The aim of this research was the design of tunable matching networks, in two different contexts: the TMN at low and high signals.Performance criteria of TMN were studied. A general expression has been developed that estimates the TMN efficiency in function of the quality factor of the components used. The impedance coverage of different RAA topologies was plotted in function of the insertion losses.For the small signal, we designed a prototype in PCB, composed by two TMN, which ensure the simultaneous matching of a power amplifier in a wide range of impedances, included in a circle of the Smith chart VSWR < 5: 1. The coverage area was measured and presented in function of the insertion losses, emphasizing the areas where the TMN contribute to improve the amplifier performance and those where insertion losses of the TMN are not able to compensate gain with the reduction of the reflection coefficients.Subsequently, we discussed the design of TMN for the large signal. The objective is to present at the output of a power amplifier, the impedances that optimize efficiency for each power of operation. A 130 nm SOI prototype was designed and simulated, consisting of a power amplifier for WCDMA standard, 900 MHz, and a MN tunable by MOS varactors able to produce the optimal impedances corresponding to an output power between 20 and 30 dBm. The results showed the benefit provided by inserting a tunable MN compared to a fixed one.