Several fabrication techniques for surface micromachined 3-D structures have been developed for RF components. The fabrication techniques all have in common the use of epoxy patterning and subsequent metallization. Techniques and structures such as embedded conductors, epoxy-core conductors, a reverse-side exposure technique, a multi-exposure scheme, and inclined patterning are presented. The epoxy-core conductor technique makes it easy to fabricate high-aspect-ratio (10-20:1), tall (~1mm) RF subelements as well as potentially very complex structures by taking advantage of advanced epoxy processes. To demonstrate feasibility and usefulness of the developed fabrication techniques for RF applications, two test vehicles are employed. One is a solenoid type RF inductor, and the other is a millimeter wave radiating structure such as a W-band quarter-wavelength monopole antenna. The embedded inductor approach provides mechanical robustness and package compatibility as well as good electrical performance. An inductor with a peak Q-factor of 21 and an inductance of 2.6nH at 4.5GHz has been fabricated on a silicon substrate. In addition, successful integration with a CMOS power amplifier has been demonstrated. A high-aspect-ratio inductor fabricated using epoxy core conductors shows a maximum Q-factor of 84 and an inductance of 1.17nH at 2.6GHz on a glass substrate with a height of 900um and a single turn. Successful W-band monopole antenna fabrication is demonstrated. A monopole with a height of 800um shows its radiating resonance at 85GHz with a return loss of 16dB. In addition to the epoxy-based devices, an advanced tunable ferroelectric device architecture is introduced. This architecture enables a low-loss conductor device; a reduced intermodulation distortion (IMD) device; and a compact tunable LC module. A single-finger capacitor having a low-loss conductor with an electrode gap of 1.2um and an electrode thickness of 2.2um has been fabricated using a reverse-side exposure technique, showing a tunability of 33% at 10V. It shows an improved Q-factor of 21.5. Reduced IMD capacitors consist of wide RF gaps and narrowly spaced high resistivity electrodes with a gap of 2um and a width of 2um within the wide gap. A 14um gap and a 20um gap capacitor show improved IMD performance compared to a 4um gap capacitor by 6dB and 15dB, respectively, while the tunability is approximately 21% at 30V for all three devices due to the narrowly spaced multi-pair high resistivity DC electrodes within the gap. Finally, a compact tunable LC module is implemented by forming the narrow gap capacitor in an inductor shape. The resonance frequency of this device is variable as a function of DC bias and a frequency tunability of 1.1%/V is achieved. The RF components developed in this thesis illustrate the usefulness of the application of micromachining technology to this application area, especially as frequencies of operation of RF systems continue to increase (and therefore wavelengths continue to shrink).

Energy-efficient radio frequency (RF) power amplifiers (PAs) are critical and paramount to achieve longer battery life in state-of-the-art portable systems because they typically determine and dominate the power consumption of such devices. In this dissertation, a high-efficiency, linear RF PA with a dynamically adaptive supply and bias current control for code division multiple access (CDMA) and wideband CDMA (WCDMA) is conceived, simulated, and experimentally demonstrated with a discrete PCB-level design and in integrated circuit (IC) form. The PA efficiency is improved by dynamically adjusting both its supply voltage and bias current, there by minimizing its quiescent power dissipation. The PA supply voltage is derived from the battery by a noninverting, synchronous buck-boost switching regulator because of its flexible functionality and high efficiency. Adjusting the PA supply voltage and bias current by tracking the output power, instead of following the complete envelope in large baseband bandwidth wireless applications, is achieved by a converter with a lower switching frequency and consequently higher light-load efficiency, which translates to prolonged battery life. A discrete PCB-level prototype of the proposed system with 915 MHz center frequency, CDMA IS-95 signal having 27-dBm peak-output power resulted in more than four times improvement in the average efficiency compared to a fixed-supply class-AB PA while meeting the required performance specifications. In the IC solution fabricated in AMIs 0.5-micron CMOS process through MOSIS, a dual-mode, buck-boost converter with pulse-width modulation (PWM) control for high power and pulse-frequency modulation (PFM) for low power is designed and implemented to improve the PA efficiency during active and standby operation, respectively. The performance of the dynamically adaptive supply and bias control IC was validated by realizing a 25-dBm, 1.96 GHz center frequency, WCDMA PA over an input supply range of 1.4 4.2 V. The PA with dual-mode power supply and bias control IC showed an average-efficiency improvement of seven times compared to a fixed-supply class-AB PA, which translates to five times improvement in battery life assuming the PA is active for 2 % of the total time and in standby mode otherwise.

Radio spectrum is a vital national asset; proper management of this finite resource is essential to the operation and development of telecommunications, radio-navigation, radio astronomy, and passive remote sensing services. To maximize the utility of the radio spectrum, knowledge of its current usage is beneficial. As a result, several spectrum studies have been conducted in urban Atlanta, suburban Atlanta, and rural North Carolina. These studies improve upon past spectrum studies by resolving spectrum usage by nearly all its possible parameters: frequency, time, polarization, azimuth, and location type. The continuous frequency range from 400MHz to 7.2 GHz was measured with a custom-designed system. More than 8 billion spectrum measurements were taken over several months of observation. A multi-parameter spectrum usage detection method was developed and analyzed with data from the spectrum studies. This method was designed to exploit all the characteristics of spectral information that was available from the spectrum studies. Analysis of the spectrum studies showed significant levels of underuse. The level of spectrum usage in time and azimuthal space was determined to be only 6.5 % for the urban Atlanta, 5.3 % for suburban Atlanta, and 0.8 % for the rural North Carolina spectrum studies. Most of the frequencies measured never experienced usage. Interference was detected in several protected radio astronomy and sensitive radio navigation bands. A cognitive radio network architecture to share spectrum with fixed microwave systems was developed. The architecture uses a broker-based sharing method to control spectrum access and investigate interference issues.

This dissertation presents the research on several different projects. The first project is a via-less CPW RF probe pad to microstrip transition; The second, the third, and the fourth one are reconfigurable microwave circuits using RF MEMS switches: an X-band reconfigurable bandstop filter for wireless RF frontends, an X-band reconfigurable impedance tuner for a class-E high efficiency power amplifier using RF MEMS switches, and a reconfigurable self-similar antenna using RF MEMS switches. The first project was developed in order to facilitate the on-wafer measurement for the second and the third project, since both of them are microstrip transmission line based microwave circuits. A thorough study of the via-less CPW RF probe pad to microstrip transition on silicon substrates was performed and general design rules are derived to provide design guidelines. This research work is then expanded to W-band via-less transition up to 110 GHz. The second project is to develop a low power reconfigurable monolithic bandstop filter operating at 8, 10, 13, and 15 GHz with cantilever beam capacitive MEMS switches. The filter contains microstrip lines and radial stubs that provide different reactances at different frequencies. By electrically actuating different MEMS switches, the different reactances from different radial stubs connecting to these switches will be selected, thus, the filter will resonate at different frequencies. The third project is to develop a monolithic reconfigurable impedance tuner at 10 GHz with the cantilever DC contact MEMS switch. The impedance tuner is a two port network based on a 3bit-3bit digital design, and uses 6 radial shunt stubs that can be selected via integrated DC contact MEMS switches. By selecting different states of the switches, there will be a total of 2^6 = 64 states, which means 64 different impedances will be generated at the output port of the tuner. This will provide a sufficient tuning range for the output port of the power amplifier to maximize the power efficiency. The last project is to integrate the DC contact RF MEMS switches with self-similar planar antennas, to provide a reconfigurable antenna system that radiates with similar patterns over a wide range of frequencies.

The emergence of multi-band communications standards, and the fast pace of the consumer electronics markets for wireless/cellular applications emphasize the need for fast design closure. In addition, there is a need for electronic product designers to collaborate with manufacturers, gain essential knowledge regarding the manufacturing facilities and the processes, and apply this knowledge during the design process. In this dissertation, efficient layout-level circuit sizing techniques, and methodologies for design-for-manufacturability have been investigated. For cost-effective fabrication of RF modules on emerging technologies, there is a clear need for design cycle time reduction of passive and active RF modules. This is important since new technologies lack extensive design libraries and layout-level electromagnetic (EM) optimization of RF circuits become the major bottleneck for reduced design time. In addition, the design of multi-band RF circuits requires precise control of design specifications that are partially satisfied due to manufacturing variations, resulting in yield loss. In this work, a broadband modeling and a layout-level sizing technique for embedded inductors/capacitors in multilayer substrate has been presented. The methodology employs artificial neural networks to develop a neuro-model for the embedded passives. Secondly, a layout-level sizing technique for RF passive circuits with quasi-lumped embedded inductors and capacitors has been demonstrated. The sizing technique is based on the circuit augmentation technique and a linear optimization framework. In addition, this dissertation presents a layout-level, multi-domain DFM methodology and yield optimization technique for RF circuits for SOP-based wireless applications. The proposed statistical analysis framework is based on layout segmentation, lumped element modeling, sensitivity analysis, and extraction of probability density functions using convolution methods. The statistical analysis takes into account the effect of thermo-mechanical stress and process variations that are incurred in batch fabrication. Yield enhancement and optimization methods based on joint probability functions and constraint-based convex programming has also been presented. The results in this work have been demonstrated to show good correlation with measurement data.

A comprehensive study of the High-pass/Low-pass topology has been performed, increasing the understanding of error sources arising from bit layout issues and fabrication tolerances. This included a detailed analysis of error sources in monolithic microwave phase shifters due to device size limitations, inductor parasitics, loading effects, and non-ideal switches. Each component utilized in the implementation of a monolithic high-low pass phase shifter was analyzed, with its influence on phase behavior shown in detail. An emphasis was placed on the net impact on absolute phase variation, which is critical to the system performance of a phased array radar system. The design of the individual phase shifter filter sections, and the influence of bit ordering on overall performance was also addressed. A variety of X-band four- and five-bit phase shifters were fabricated in a 200 GHz SiGe HBT BiCMOS technology platform, and further served to validate the analysis and design methodology. The SiGe phase shifter can be successfully incorporated into a single-chip T/R module forming a system-on-a-chip (SoC). Reduction in the physical size of transmission lines was shown to be a possibility with spinel magnetic nanoparticle films. The signal transmission properties of phase lines treated with nanoparticle thin films were examined, showing the potential for significant size reduction in both delay line and High-pass/Low-pass phase topologies. Wide-band, low-loss, and near-hermetic packaging techniques for RF MEMS devices were presented. A thermal compression bonding technique compatible with standard IC fabrication techniques was shown, that uses a low temperature thermal compression bonding method that avoids plastic deformations of the MEMS membrane. Ultimately, a system-on-a-package (SoP) approach was demonstrated that utilized packaged RF MEMS switches to maintain the performance of the SiGe phase shifter with much lower loss. The extremely competitive performance of the MEMS-based High-pass/Low-pass phase shifter, despite the lack of the extensive toolkits and commercial fabrication facilities employed with the active-based SiGe phase shifters, confirms both the effectiveness of the detailed phase error analysis presented in this work and the robust nature of the High-pass/Low-pass topology.

This thesis presents an overview of the simulation, design, and measurement of state-of-the-art Silicon-Germanium Hetro-Junction Bipolar Transistor (SiGe HBT) low-noise amplifiers (LNAs). The LNA design trade-off space is presented and methods for achieving an optimized design are discussed. In Chapter 1, we review the importance of LNAs and the benefits of SiGe HBT technology in high frequency amplifier design. Chapter 2 introduces LNA design and basic noise theory. A graphical LNA design approach is presented to aid in understanding of the high-frequency LNA design process. Chapter 3 presents an LNA design optimization method for power constrained applications. Measured results using this design technique are highlighted and shown to have record performance. Lastly, in Chapter 4, we highlight cryogenic noise performance and present measured results from cryogenic operation of SiGe HBT LNAs. We demonstrate in this thesis that SiGe HBT LNAs have the capability to meet the demanding needs for next generation wireless systems. The aim of the analysis presented herein is to provide designers with the fundamentals of designing SiGe HBT LNAs through relevant design examples and measured results.

The Multidisciplinary University Research Initiative (MURI) research at Texas A and M University is concerned with the experimental characterization of non-thermal and non-chemical equilibrium systems in hypersonic (Mach greater than 5) flowfields using experimental diagnostics, and is an interdisciplinary collaboration between the Chemistry and Aerospace Engineering departments. Hypersonic flight conditions often lead to non-thermochemical equilibrium (NTE) state of air, where the timescale of reaching a single (equilibrium) Boltzmann temperature is much longer than the timescale of the flow, meaning that certain molecular modes such as vibrational modes, may be much more excited than the translational or rotational modes of the molecule leading to thermal-nonequilibrium. A nontrivial amount of energy is therefore contained within the vibrational mode, and this energy cascades into the flow as thermal energy, affecting flow properties through the process of various vibrational-vibrational (V-V) and vibrational-translational (V-T) energy exchanges between the flow species. The research is a fundamental experimental study of these NTE systems and involves the application of advanced laser and optical diagnostics towards hypersonic flowfields. The research is broken down into two main categories: the application and adaptation of existing laser and optical techniques towards characterization of NTE, and the development of new molecular tagging velocimetry techniques which have been demonstrated in an NTE flowfield, but may be extended towards a variety of flowfields.

In this thesis, the feasibility of deploying RFID technologies in the case of &ldquo / lowvolume high-value&rdquo / products is considered by focusing on the production processes of a real company. First, the processes of the company are examined and associated problems are determined. Accordingly, a simulation of the current situation is constructed by using the discrete event simulation technique, in order to obtain an accurate model. In addition to modeling the current situation, this simulation model provides a flexible platform to analyze different scenarios and their effects on the company production. Next, various scenarios including RFID technology deployment are examined, and their results are compared with respect to profitanalysis which takes into consideration the changes in the production, work in process (WIP) inventory, stockouts, transportation and initial investment. Finally, the analysis of the results and conclusions are given in order to provide guidance for companies with &ldquo / low-volume high-value&rdquo / product portfolios.

Limited asset visibility is a key problem in the management of returnable transport items (RTIs) like reusable containers, pallets and kegs. One tool to increase asset visibility is radio frequency identification (RFID) technology. However, RFID requires high investment cost and intensive efforts for implementation. In this study, we investigate the added value of using RFID technology for the management of the RTI pool in a closed-loop supply chain setting considering both costs and benefits. We have conducted a case study in a company which has recently started an RFID application in its closed-loop supply chain of RTIs. The aim of this case study is to identify and understand how an existing RTI pool is managed and the impact of using RFID technology on the management of such an RTI pool. In order to quantify the added value of RFID technology in RTI pool management, we search for the minimum cost solutions both without and with the use of RFID technology in a problem environment similar to that of our case study using the simulation optimization method. We also analyze the impact of using RFID technology on RTI pool management in terms of several performance measures, including RTI pool size, RTI lifetime, RTI trippage and the cycle time for RTIs to complete one trip in the closed-loop supply chain. In our study, we develop a number of discrete event simulation models of the identified closed-loop supply chain of RTIs operating with our predetermined decision rules for the RTI pool management using the simulation software Arena. We then develop our simulation optimization model in OptQuest for Arena in which the discrete event simulation models are embedded. The results from the simulation optimization method show that the added value of using RFID technology is mostly positive and it depends on the severity of the problematic issues in the closed-loop supply chain, as well as on the extent of improvements that RFID brings about.