The quest for multi-standard and software-defined radio (SDR) receivers calls for high flexibility in the receiver building-blocks so that to accommodate several wireless services using a single receiver chain in mobile handsets. A potential approach to achieve flexibility in the receiver is to move the analog-to-digital converter (ADC) closer to the antenna so that to exploit the enormous advances in digital signal processing, in terms of technology scaling, speed, and programmability. In this context, continuous-time (CT) delta-sigma (ΔƩ) ADCs show up as an attractive option. CT ΔƩ ADCs have gained significant attention in wideband receivers, owing to their amenability to operate at a higher-speed with lower power consumption compared to discrete-time (DT) implementations, inherent anti-aliasing, and robustness to sampling errors in the loop quantizer. However, as the ADC moves closer to the antenna, several blockers and interferers are present at the ADC input. Thus, it is important to investigate the sensitivities of CT ΔƩ ADCs to out-of-band (OOB) blockers and find the design considerations and solutions needed to maintain the performance of CT ΔƩ modulators in presence of OOB blockers. Also, CT ΔƩ modulators suffer from a critical limitation due to their high sensitivity to the clock-jitter in the feedback digital-to-analog converter (DAC) sampling-clock. In this context, the research work presented in this thesis is divided into two main parts. First, the effects of OOB blockers on the performance of CT ΔƩ modulators are investigated and analyzed through a detailed study. A potential solution is proposed to alleviate the effect of noise folding caused by intermodulation between OOB blockers and shaped quantization noise at the modulator input stage through current-mode integration. Second, a novel DAC solution that achieves tolerance to pulse-width jitter by spectrally shaping the jitter induced errors is presented. This jitter-tolerant DAC doesn’t add extra requirements on the slew-rate or the gain-bandwidth product of the loop filter amplifiers. The proposed DAC was implemented in a 90nm CMOS prototype chip and provided a measured attenuation for in-band jitter induced noise by 26.7dB and in-band DAC noise by 5dB, compared to conventional current-steering DAC, and consumes 719µwatts from 1.3V supply.

The development of multi-standard wireless communication systems with low cost and high integration is continuously requested and accompanied by the explosive growth of the wireless communication market. Although CMOS technology can provide most building blocks in RF transceivers, the implementation of CMOS RF power amplifiers is still a challenging task. The objective of this research is to develop design techniques to implement fully-integrated multi-mode power amplifiers using CMOS technology. In this dissertation, a load modulation technique with tunable matching networks and a pre-distortion technique in a multi-stage PA are proposed to support multi-communication standards with a single PA. A fully-integrated dual-mode GSM/EDGE PA was designed and implemented in a 0.18 um CMOS technology to achieve high output power for the GSM application and high linearity for the EDGE application. With the suggested power amplifier design techniques, fully-integrated PAs have been successfully demonstrated in GSM and EDGE applications. In Addition to the proposed techniques, a body-switched cascode PA core is also proposed to utilize a single PA in multi-mode applications without hurting the performance. With the proposed techniques, a fully-integrated multi-mode PA has been implemented in a 0.18 um CMOS technology, and the power amplifier has been demonstrated successfully for GSM/EDGE/WCDMA applications. In conclusion, the research in this dissertation provides CMOS RF power amplifier solutions for multiple standards in mobile wireless communications with low cost and high integration.

Our aim with this essay is to examine if social work in the care of elderly tends to be salutogenetic or patogenetic oriented. A salutogenetic oriented activity means that the social workers focuses on the elderly peoples individual possibilities, and collaborate with the receiver of care in order to offer him or her aid and resources for meaningful living conditions. A patogenetic oriented activity on the other hand means that the social workers focuses on the elderly peoples most primary needs, their illnesses and to introduce adequate treatment. We also examine if social workers in the care of elderly tend to prefer male or female characteristic features in the receivers of care. Finally we wanted to find out if there were any gender distinctions, if the appraisal of aid were more affected by a male or female receiver of care. We also considered that gender might not have any affect on their appraisal at all. Our theoretical framework is mainly based on three already existing theories. These gave us a general list of salutogenetic/patogenetic statements and typical male/female characteristic features. Because of time shortage the material includes only one empirical method, which is a questionnaire to the employees in the care of the elderly. The method of analysis is mostly quantitative, but since the questionnaire also contained some opened questions, our study is partly qualitative. A total of 101 persons participated in our questionnaire poll. The results of our study brought about unexpected results. To our surprise, the social workers in the care of elderly tend to prefer male characteristic features in the receivers of care. We also found that what requires of a good apraisal of aid is a salutogenetic perspective, but that the social workers thought it was difficult to apply in practice.

Energy-efficient radio frequency (RF) power amplifiers (PAs) are critical and paramount to achieve longer battery life in state-of-the-art portable systems because they typically determine and dominate the power consumption of such devices. In this dissertation, a high-efficiency, linear RF PA with a dynamically adaptive supply and bias current control for code division multiple access (CDMA) and wideband CDMA (WCDMA) is conceived, simulated, and experimentally demonstrated with a discrete PCB-level design and in integrated circuit (IC) form. The PA efficiency is improved by dynamically adjusting both its supply voltage and bias current, there by minimizing its quiescent power dissipation. The PA supply voltage is derived from the battery by a noninverting, synchronous buck-boost switching regulator because of its flexible functionality and high efficiency. Adjusting the PA supply voltage and bias current by tracking the output power, instead of following the complete envelope in large baseband bandwidth wireless applications, is achieved by a converter with a lower switching frequency and consequently higher light-load efficiency, which translates to prolonged battery life. A discrete PCB-level prototype of the proposed system with 915 MHz center frequency, CDMA IS-95 signal having 27-dBm peak-output power resulted in more than four times improvement in the average efficiency compared to a fixed-supply class-AB PA while meeting the required performance specifications. In the IC solution fabricated in AMIs 0.5-micron CMOS process through MOSIS, a dual-mode, buck-boost converter with pulse-width modulation (PWM) control for high power and pulse-frequency modulation (PFM) for low power is designed and implemented to improve the PA efficiency during active and standby operation, respectively. The performance of the dynamically adaptive supply and bias control IC was validated by realizing a 25-dBm, 1.96 GHz center frequency, WCDMA PA over an input supply range of 1.4 4.2 V. The PA with dual-mode power supply and bias control IC showed an average-efficiency improvement of seven times compared to a fixed-supply class-AB PA, which translates to five times improvement in battery life assuming the PA is active for 2 % of the total time and in standby mode otherwise.

In this dissertation, the development of the first 60 GHz-standard compatible fully integrated 4-channel phase-locked loop (PLL) frequency synthesizer has been presented. The frequency synthesizer features third-order single loop architecture with completely integrated passive loop filter that does not require any additional external passive component. Two possible realizations of fully integrated clock and data recovery (CDR) circuits suitable for 60 GHz-standard compliant base band signal processing have been presented for the first time as well. The two CDRs have been optimized for either high data rate (3.456 Gb/s) or very low power consumption (5 mW) and they both work with a single 1 V supply. The frequency synthesizer is intended to generate a variable LO frequency in a fixed-IF heterodyne transceiver architecture. In such configuration the channel selection is implemented by changing the LO frequency by the required frequency step. This method avoids quadrature 50 GHz up/down-conversion thereby lowering the LO mixer design complexity and simplifying the LO distribution network. The measurement results show the PLL locking correctly on each of the four channels while consuming 60 mW from a 1 V power supply. The worst case phase noise is measured to be -80.1 dBc/Hz at 1 MHz offset from the highest frequency carrier (56.16 GHz). The output spectrum shows a reference spur attenuation of -32 dBc. The high data rate CDR features a maximum operating data rate in excess of 3.456 Gb/s while consuming 30 mW of power. The low power CDR consumes only 5 mW and operates at a maximum data rate of 1.728 Gb/s. Over a 1.5 m 60 GHz wireless link, both CDRs allow 95% reduction of the pulse shaping generated input peak-to-peak jitter from 450 ps down to 50 ps.

<p>This Master’s Thesis is an evaluation of the software Xilinx System Generator (XSG) and blockset for Matlab. XSG is a module to simulink developed by Xilinx in order to generate VHDL code directly from functions implemented in Matlab. The evaluation was made at Saab Avionics AB in Järfälla, north of Stockholm. </p><p>In order to investigate the performance of this new module XSG to simulink, a model of a frequency estimator often used in digital radar receivers were implemented in Matlab using XSG. Engineers working at SAAB Avionics implemented the same application directly in VHDL, without using Matlab and the XSG. After generating code the results were synthesised, analysed and compared. </p><p>The frequency estimator basically contains an FFT, a windowing function and a sorting algorithm used to enable analyse of two real signals simultaneously. There were however problems during generation of the VHDL code and the model had to be broken into smaller parts containing only a 16-point FFT. The results of comparison in this report are based on models containing only this 16-point FFT and they show a small advantage for the System Generator according to the resource usage report generated during synthesis. </p><p>Designing models for generation using Xilinx Blockset can create a lot of wiring between components. The reason for this is that the System Generator and Xilinx Blockset today is a new tool, not completely developed. There are many components found in simulink, Matlab that could not be found in Xilinx Blockset, this is however being improved. Another problem is long time for simulation and errors during generation. </p><p>My opinion is that when used for smaller systems and with further development the System Generator can be a useful facility in designing digital electronics.</p>

Not available / text

Στην απαρχή της καινούριας χιλιετίας, έχει γίνει πλέον ξεκάθαρος ο σπουδαίος ρόλος και η χρησιμότητα των ασυρμάτων τηλεπικοινωνιών και των εφαρμογών τους, η εξέλιξη των οποίων επικεντρώνεται σε μεγάλο βαθμό στις Ασύρματες Προσωπικές Τηλεπικοινωνίες (ΑΠΤ). Εξαιτίας της μεγάλης δημοτικότητας που έχουν τα συστήματα αυτά, υπάρχει συνεχής ανάγκη για αύξηση της χωρητικότητας και αναβάθμιση των παρεχόμενων υπηρεσιών ϕωνής και δεδομένων. Μια πολύ σημαντική περιοχή έρευνας για τις ΑΠΤ, που έχει προκύψει από τις παραπάνω απαιτήσεις, είναι η μελέτη και η αντιμετώπιση των προβλημάτων που δημιουργούνται στην επίδοση των δικτύων αυτών από διάφορα ϕαινόμενα που επιδρούν στο ασύρματο κανάλι. Σε αυτήν την ερευνητική περιοχή εστιάζεται και η παρούσα διδακτορική διατριβή, που έχει ως στόχο τη ϑεωρητική μελέτη της επίδοσης ασύρματων ψηφιακών τηλεπικοινωνιακών συστημάτων τα οποία υπόκεινται σε διαλείψεις. Για την καταπολέμηση των αρνητικών συνεπειών των διαλείψεων έχει υιοθετηθεί η τεχνική του διαφορισμού στο δέκτη. Σύμφωνα με αυτήν, ο δέκτης διαθέτει περισσότερες από μια κεραίες λήψης με αποτέλεσμα να λαμβάνει πολλαπλά αντίγραφα του εκπεμπόμενου σήματος, τα οποία συνδυάζει κατάλληλα ανάλογα με τις απαιτήσεις του διαχειριστή του δικτύου. Η διεθνής έρευνα για τη χρήση δεκτών διαφορισμού σε κανάλια Διαλείψεων Μικρής Κλίμακας (ΔΜΙΚ) είναι εκτενής και αφορά κυρίως κανάλια που βασίζονται στις κατανομές Rayleigh, Rice και Nakagamim. Δύο άλλες σημαντικές κατανομές για τη μοντελοποίηση των ΔΜΙΚ είναι η Weibull και, η γενίκευση της, η Γενικευμένη-Γάμα (ΓG), οι οποίες σε σύντομο χρονικό διάστημα έχουν κερδίσει εκτεταμένο επιστημονικό ενδιαφέρον στην περιοχή των ασύρματων κινητών τηλεπικοινωνιών. ΄Ομως, παρά το ενδιαφέρον αυτό, η μελέτη της επίδοσης δεκτών διαφορισμού σε κανάλια που μοντελοποιούνται με τις κατανομές αυτές, δεν έχει λάβει τις διαστάσεις που έχουν λάβει οι αντίστοιχες έρευνες για τις άλλες κατανομές. Αυτό οφείλεται σε μεγάλο βαθμό στη μεγάλη πολυπλοκότητα, από μαϑηματικής άποψης, που παρουσιάζει η στατιστική αναπαράσταση του σήματος της εξόδου πολλών τύπων δεκτών διαφορισμού που σε συνδυασμό με τη σχετικά σύνθετη μαθηματική έκφραση των κατανομών Weibull και ΓG, δημιουργεί δυσεπίλυτα προβλήματα. Στην παρούσα διατριβή, προσπερνώντας αυτές τις δυσκολίες, αρχικά μελετήθηκε η απόδοση μιας ειδικής κατηγορίας δεκτών διαφορισμού, του δέκτη Συνδυασμού Γενικευμένης Επιλογής (ΣΓΕ), ο οποίος λειτουργεί σε Ανεξάρτητα αλλά Μη-Ομοιόμορφα Κατανεμημένα (ΑΜΟΚ) κανάλια διαλείψεων Weibull. Σε αυτήν τη μελέτη εξετάζεται η περίπτωση όπου επιλέγονται οι δύο κλάδοι με το υψηλότερο λόγο σήματος προς ϑόρυβο, Signal to Noise Ratio (SNR), από τους L διαθέσιμους, ΣΓΕ(2, L). Κατά συνέπεια, με την παρουσίαση μιας καινούριας ιδιότητας για το γινόμενο των ροπών ταξινομημένων Τυχαίων Μεταβλητών (ΤΜ) Weibull, γίνεται δυνατή η εξαγωγή εκφράσεων κλειστής μορφής για τις ροπές του SNR στην έξοδο των δεκτών ΣΓΕ(2, L). Χρησιμοποιώντας αυτές τις εκφράσεις δίνονται, σε κλειστή μορφή επίσης, σημαντικά κριτήρια επίδοσης όπως είναι ο Μέσος Λόγος Σήματος προς Θόρυβο (ΜΛΣΘ) και η Ποσότητα των Διαλείψεων (ΠΔ). Επιπλέον, με την εφαρμογή της ϑεωρίας των προσεγγιστών Pad´e και της προσέγγισης μέσω της Ροπο-Γεννήτριας Συνάρτησης (ΡΓΣ), γίνεται δυνατή η μελέτη της Πιθανότητας Διακοπής της Επικοινωνίας (ΠΔΕ) και της Μέσης Πιθανότητας Σφάλματος Bit (ΜΠΣΒ) του συστήματος. Στη συνέχεια, υποθέτοντας Ανεξάρτητα και Ομοιόμορφα Κατανεμημένα (ΑΟΚ) κανάλια διαλείψεων ΓG, παρουσιάστηκε σε κλειστή μορφή έκφραση για τις ροπές του SNR στην έξοδο των δεκτών ΣΓΕ(2, L), ενώ η ΡΓΣ και η Αθροιστική Συνάρτηση Κατανομής (ΑΣΚ) εξήχθησαν υπό τη μορφή απειροσειρών. Χρησιμοποιώντας αυτές τις εκφράσεις απλοποιείται σημαντικά η μελέτη των κριτηρίων επίδοσης της ΠΔΕ και της ΜΠΣΒ. Επιπλέον, παρουσιάστηκε η χωρητικότητα του καναλιού ΓG με τη χρήση ή όχι δεκτών διαφορισμού, με βάση πολύ γνωστές τεχνικές προσαρμογής της εκπομπής. Μια άλλη πολύ σημαντική ερευνητική περιοχή που αφορά τα κανάλια διαλείψεων και επηρεάζει σημαντικά την επίδοση των ασύρματων ψηφιακών τηλεπικοινωνιακών συστημάτων που λειτουργούν σε αυτά, είναι το σύνθετο περιβάλλον διάδοσης που δημιουργείται όταν οι ΔΜΙΚ συνυπάρχουν με Διαλείψεις Μεγάλης Κλίμακας (ΔΜΕΚ). Στην παρούσα διδακτορική διατριβή, αυτό το περιβάλλον διάδοσης μοντελοποιείται με τις σύνθετες κατανομές K και γενικευμένη-K (KG). Αυτές οι κατανομές είναι αρκετά γενικές, αλλά ταυτόχρονα και μαθηματικά ευέλικτες, και έχει διαπιστωθεί ότι είναι κατάλληλες για τη μοντελοποίηση των συνθηκών του καναλιού που προκύπτει όταν οι ΔΜΙΚ συμβαίνουν ταυτόχρονα με ΔΜΕΚ. Στην περίπτωση της κατανομής KG, εξάγονται σημαντικά στατιστικά χαρακτηριστικά του SNR στην έξοδο των δεκτών διαφορισμού Συνδυασμού Μεγίστου Λόγου (ΣΜΛ), Συνδυασμού ΄Ισης Απολαβής (ΣΙΑ), Συνδυασμού Μεταγωγής και Παραμονής (ΣΜΠ) και του δέκτη Διαφορισμού Επιλογής (ΔΕ). Χρησιμοποιώντας αυτές τις εκφράσεις και υποθέτωντας ΑΜΟΚ συνθήκες διαλείψεων του καναλιού KG, εξάγονται σε κλειστή μορφή τα κριτήρια επίδοσης ΜΛΣΘ, ΠΔΕ και ΠΔ. Επιπλέον, ακολουθώντας την προσέγγιση που βασίζεται στη ΡΓΣ για τους δέκτες ΣΜΛ και ΣΜΠ και τους προσεγγιστές Pad´e για τους δέκτες ΣΙΑ και ΔΕ μελετάται η ΜΠΣΒ. Για την περίπτωση της κατανομής K, υποθέτωντας επιπλέον συσχετισμένες ΤΜ, παρουσιάζεται και μελετάται η συσχετισμένη (δι-μεταβαλλόμενη) κατανομή K, η οποία χαρακτηρίζεται από μη ομοιόμορφους παράγοντες μορφοποίησης και κλίμακας. Η σύνθετη αυτή κατανομή είναι βολική για τη μοντελοποίηση του συσχετισμένου περιβάλλοντος διαλείψεων/σκίασης, όταν η συσχέτιση μεταξύ των πλατών των σημάτων και της ισχύος τους είναι διαφορετική. Για αυτήν την κατανομή, εξάγονται γενικές εκφράσεις με απειροσειρές για τη Συνάρτηση Πυκνότητας Πιθανότητας (ΣΠΠ), την ΑΣΚ και τις από κοινού ροπές. Υποθέτοντας ομοιόμορφους παράγοντες κλίμακας και ασυσχέτιστη ισχύ σημάτων, παρέχονται απλούστερες εκφράσεις για τη ΣΠΠ, την ΑΣΚ και τη χαρακτηριστική συνάρτηση, ενώ οι από κοινού ροπές εξάγονται σε κλειστή μορφή. Επιπλέον, βασιζόμενοι σε αυτές τις ϑεωρητικές εκφράσεις της δι-μεταβαλλόμενης κατανομής K, παρουσιάζεται η ανάλυση της επίδοσης σημαντικών δεκτών διαφορισμού, όπως είναι οι δέκτες ΣΜΛ, ΣΙΑ και ΔΕ οι οποίοι λειτουργούν σε συσχετισμένα κανάλια διαλείψεων K. Για το δέκτη ΔΕ μελετάται η ΠΔΕ, ενώ για τους δέκτες ΣΜΛ και ΣΙΑ η ΜΠΣΒ. Γενικά η προτεινόμενη ανάλυση συνοδεύεται από αριθμητικά αποτελέσματα, τα οποία επιδεικνύουν ξεκάθαρα τη χρησιμότητα και την ευελιξία της ϑεωρητικής προσέγγισης. Τα αριθμητικά αυτά αποτελέσματα περιλαμβάνουν σύγκριση της επίδοσης διαφορετικών δεκτών διαφορισμού, συνθηκών καναλιού και τεχνικών διαμόρφωσης. / At the beginning of the new millennium, it becomes totaly clear the important role and usefulness of the wireless communication systems and their applications, which continue to evolute in several areas including Personal Communication Services (PCS). In this context there is a continuing demand for increased capacity and integration of the provided services, such as voice, data and other types of traffic, over radio channels. One of the key technical problem areas that has emerged out is the requirement for determining the fading effects on network performance. This also the research area of the current Philosophy diploma, which aims to the theoretical study of the performance analysis of wireless communication systems, which are subject to fading. The current study has employed diversity reception as a fading mitigation technique. According to this technique, the receiver employs more than one antennae, in order to receive multiple copies of the transmitted signal. Hence, these copies are appropriate combined in order to satisfy network administrator demands. The technical literature concerning diversity reception techniques over fading channels is quite extensive. However, it deals mainly with fading channels, which are based on Rayleigh, Rice, and Nakagami-m distributions. Additionally, important distributions for modeling small scale fading are also the Weibull and, its generalization, the generalized-gamma (ΓG), which have recently gained an increased scientific interest in the wireless mobile communication area. However, the performance analysis of diversity receivers operating over fading channels, modeled by these distributions, has not been thoroughly investigated. Reasons for that include the composite statistical representation of several diversity receivers output in conjunction with the quite complicated mathematical expressions of the Weibull and/or ΓG distributions. In this thesis, by overcoming these difficulties the performance of a class of Generalized-Selection Combining (GSC) receivers operating over independent but non identically distributed Weibull fading channels is studied. The case where the two branches with the largest instantaneous Signal-to-Noise Ratio (SNR) are selected, from a total of L available GSC(2, L), is considered. By introducing a novel property for the product of moments of ordered Weibull Random Variables (RV), convenient closed form expressions for the moments of the GSC(2, L) output SNR are derived. Using these expressions, important performance criteria, such as average output SNR and amount of fading (AF ), are obtained in closed form. Furthermore, employing the Pad´e approximants theory and the Moment-Generating Function (MGF)-based approach, outage and bit-error rate performances are studied. Additionally, by considering independent and identical distributed (iid) ΓG fading channels, the moments of the output SNR of the GSC(2, L) receivers were derived, also, in closed form, while infinite series representations were obtained for the MGF and the Cumulative Distribution Function (CDF). Using these expressions, a simplified study of the Outage Probability (OP) and Average Bit Error Probability (ABEP) performance criteria can be performed. Moreover, the capacity of the ΓG fading channel, using different adaptation policies, is also studied, with and without diversity reception. Another important research issue concerning the performance analysis of wireless digital communications systems operating over fading channels, is the composite propagation environment arising in cases where fading is superimposed on shadowing. In the current thesis this propagation environment is modeled by the K and generalized-K (KG) composite distributions. These distributions are quite general and mathematical versatile, and have been found to be appropriate for accurately modeling the channel conditions when fading occurs simultaneously with shadowing. For the KG distribution, expressions for important statistical metrics of the output SNR for the Selection Diversity (SD) receiver and Maximal Ratio Combining (MRC), Equal Gain Combining (EGC), and Switch and Stay Combining (SSC) diversity receivers are derived. Using these expressions and by considering independent but not necessarily identical distributed fading channel conditions, performance criteria, such as average output SNR, AF and OP are obtained in closed form. Moreover, following the MGFbased approach for MRC and SSC receivers, and the Pad´e approximants theory for SD and EGC receivers, the ABEP is also studied. For the case of the K distribution, assuming correlated RVs, the correlated (bivariate) K distribution, with not necessarily identical shaping and scaling parameters, is introduced and studied. This composite distribution is convenient for modeling multipath/shadowing correlated fading environments when the correlations between the signal envelopes and their powers are different. For this distribution, generic infinite series representations are derived for the Probability Density Function (PDF), the CDF and the joint moments. Assuming identical shaping parameters and uncorrelated signal powers, simpler expressions for the PDF, CDF and the Characteristic Function (CF) are provided, while the joint moments are derived in closed form. Capitalizing on these theoretical expressions for the statistical characteristics of the correlated K distribution, the performance analysis of various diversity reception techniques, such as MRC, EGC and SD, over bivariate K fading channels is presented. For the SD, the outage probability is studied, while for the MRC and EGC the ABEP is obtained. In general the proposed analysis is accompanied by several numerical evaluated results, clearly demonstrating the usefulness and flexibility of the theoretical approach. These numerical results include performance comparisons of several diversity receiver structures, employing various modulation formats and different channel conditions.

An 80 MHz bandpass filter with a tunable quality factor of 16∼44 using an improved transconductor circuit is presented. A noise optimized biquad structure for high-Q, high- frequency bandpass filter is proposed. The quality factor of the filter is tuned using a new quality factor locked loop algorithm. It was shown that a second-order quality factor locked loop is necessary and sufficient to tune the quality factor of a bandpass filter with zero steady state error. The accuracy, mismatch, and sensitivty analysis of the new tuning scheme was performed and analyzed. Based on the proposed noise optimized filter structure and new quality factor tuning scheme, a biquad filter was designed and fabricated in 0.25 μm BiCMOS process. The measured results show that the biquad filter achieves a SNR of 45 dB at IMD of 40 dB. The P-1dB compression point and IIP3 of the filter are -10 dBm and -2.68 dBm, respectively. The proposed biquad filter and quality factor tuning scheme consumes 58mW and 13 mW of power at 3.3 V supply.

With the advance of the LCD technology, video quality is becoming increasingly important. In this thesis, we develop hardware-friendly low-complexity enhancement algorithms. Video quality enhancement methods can be classified into two main categories. Single frame methods are the first category. These methods have generally low computational complexity. Multi-frame methods combine information from more than one frame and require the motion information of objects in the scene to do so. We first concentrate on the contrast-enhancement problem by using both global (frame-wise) and local information derived from the image. We use the image histogram and present a regularization-based histogram modification method to avoid problems that are often created by histogram equalization. Next, we design a compression artifact reduction algorithm that reduces ringing artifacts, which is disturbing especially on large displays. Furthermore, to remove the blurriness in the original video we present a non-iterative diffusion-based sharpening algorithm, which enhances edges in a ringing-aware fashion. The diffusion-based technique works on gradient approximations in a neighborhood individually. This gives more freedom compared to modulating the high-pass filter output that is used to sharpen the edges. Motion estimation enables applications such as motion-compensated noise reduction, frame-rate conversion, de-interlacing, compression, and super-resolution. Motion estimation is an ill-posed problem and therefore requires the use of prior knowledge on motion of objects. Objects have inertia and are usually larger then pixels or a block of pixels in size, which creates spatio-temporal correlation. We design a method that uses temporal redundancy to improve motion-vector search by choosing bias vectors from the previous frame and adaptively penalizes deviations from the bias vectors. This increases the robustness of the motion-vector search. The spatial correlation is more reliable because temporal correlation is difficult to use when the objects move fast or accelerate in time, or have small sizes. Spatial smoothness is not valid across motion boundaries. We investigate using energy minimization for motion estimation and incorporate the spatial smoothness prior into the energy. By formulating the energy minimization iterations for each motion vector as the primal problem, we show that the dual problem is motion segmentation for that specific motion vector.