Plusieurs industries manipulent des substances liquides et gazeuses qui circulent souvent dans de longues canalisations. La technique d'ondes guidées est couramment utilisée dans ce domaine. Cette technique est en progrès continu. Dans cette thèse, un système d'inspection a été conçu et développé. Il est basé sur des transducteurs piézoélectriques qui génèrent des ondes guidées de torsion pouvant se propager le long du tube testé. Les signaux réfléchis des défauts et singularités rencontrés sont détectés aussi par des capteurs piézoélectriques. Des simulations numériques utilisantpar la méthode d'éléments finis standard et la méthode Wave Finite Element(WFEM) ont été effectuées afin de vérifier et de visualiser le phénomène de propagation des ondes dans des tubes intacts et endommagés. Un ensemble de tests a été mis en place sur des tubes droits et courbés avec deux matériaux différents: PVC et acier. L'interaction entre les ondes générées et les défauts usinés a été prouvée.Les résultats numériques et expérimentaux confirment certaines caractéristiques spécifiques concernant le coefficient de réflexion de l'onde. Par la suite, un pipeline industriel d'environ soixante mètres de long et contenant plusieurs défauts et singularités a été testé par le système d'inspection. Les signaux enregistrés ont soumis certains traitements numériques afin de les rendre exploitables. Les signaux traités sont analysés afin d'identifier et de distinguer les réflexions des défauts de celles des singularités structurés. La méthode WFEM a été employée pour construire une base de données numérique des coefficients de réflexion en variant la profondeur et les extensions axiale et circonférentielle du défaut modélisé. Le calcul a été établi en fonction de la fréquence. La corrélation des tailles des défauts est effectuée en balayant la base de données numérique pour trouver la combinaison appropriée de dimensions pour un défaut donné. Les réflexions à partir des singularités structurées (coudes, blocs de béton, colliers, et les soudures) sont traitées ainsi en comparant des coefficients de réflexion obtenus par WFEM à ceux évalués expérimentalement. Enfin, on a étudié numériquement l'effet de la position angulaire d'un défaut sur les coefficients de réflexion et de transmission tout en excitant à différents types d'ondes. La méthode WFE est aussi utilisée pour effectuer le calcul. Cette étude donne un guide à la localisation circonférentielle des défauts dans les tubes. / Long pipelines are widely used in several industries transporting liquid or gas. The guided wave technique is commonly used in this field and it is under continuing progress. In this thesis, an inspection system has been designed and developed. Piezoelectric transducers are employed to generate torsional guided waves that could propagate along the tested pipe; and receive reflected signals from encountered features and damages. Numerical simulations using standard FE and Wave Finite Element methods have been carried out in order to verify and visualize the wave propagation phenomenon in both intact and damaged pipes. A set of tests has been performed on straight and curved pipes with two different materials: PVC and steel. The interaction between generated waves and machined defects has been proven. Numerical and experimental results confirm some specific features in the wave reflection coefficient. Thereafter, an industrial pipeline of about sixty meters long and containing several features has been tested by the inspection system.Recorded signals had submitted some numerical treatments in order to make them interpretable. Processed signals are analyzed to identify defects reflections from structured singularities echoes. The Wave Finite Element Method (WFEM) has been used to construct a numerical database of reflection coefficients from modelled defects by varying thickness, axial and circumferential extents. Calculation was made depending on frequency. The approximation of defect sizes is carried out by sweeping the numerical database to find the suitable combination of dimensions fora given defect. Reflections from structural singularities (elbows, concrete blocks,clamps, and welds) are treated as well by comparing reflection coefficients obtained by WFEM to those evaluated experimentally. Finally, a numerical investigation deals with the effect of defect angular-position on reflection and transmission coefficients while exciting by different types of waves. The spectral method Wave Finite Element has been used to carry out calculation. This study gives guidance to circumferential localization of defects in pipes.

Cette thèse se place dans le contexte général de la modélisation de réseaux d’antennes de grande taille, avec pour objectif d’atteindre un niveau de précision suffisamment élevé pour permettre une optimisation complète des performances et en particulier une amélioration de l’efficacité énergétique. Partant du constat que l’optimisation électromagnétique de grands réseaux représente un verrou si les couplages doivent être modélisés efficacement, cette thèse propose la mise en œuvre d’une méthode permettant la modélisation fine de grands réseaux d'antennes tout en réduisant les temps de calcul et en conservant un haut degré de précision. L'objectif est de montrer qu'une approche dérivée des formalismes périodiques infinis connus de la littérature permet d'obtenir une matrice [S] complète d'un réseau depuis l'étude d'une cellule unitaire. Après avoir présenté un état de l'art sur les réseaux d'antennes et leurs méthodes d'analyse, l'approche de modélisation proposée est détaillée. Des véhicules de test numériques et expérimentaux, permettant de valider cette méthode de modélisation, sont ensuite réalisés. L'approche est enfin utilisée avec succès pour deux types d'application. / This thesis is organized in the general context of modeling a large antenna arrays with the aim of achieving a high level of precision. This modeling allows a complete optimization of the performances and an enhancement of the energy efficiency. Given that the electromagnetic optimization of large arrays still represents a challenge if the mutual coupling is not efficiently modeled. This work offers the implementation of a method allowing the precise modeling of large antenna arrays while reducing the computation time and maintaining a high degree of precision. The aim is to demonstrate that the derived approach from the infinite periodic formalisms makes it possible to obtain a full [S] matrix of an array based on the study of a unit cell. After presenting a state of the art of antenna arrays and their methods of analysis, the proposed modeling approach is explained. Numerical and Experimental demonstrators are then made for the validation. Finally, this method is successfully used for two types of applications.

Les matériaux absorbants des ondes électromagnétiques sont des éléments importants pour l'évaluation de nombreux systèmes électroniques militaires mais également civils. Ces matériaux sont utilisés, par exemple, pour la réduction des interférences électromagnétiques (EMI) dans divers composants sans fils, la réduction de la surface équivalente radar (SER) ou comme absorbants à l'intérieur des chambres de mesures. C’est cette dernière application qui est visée par les travaux de cette thèse. L’objectif de mes travaux de thèse est d’optimiser des matériaux absorbants utilisés dans les chambres anéchoïques. La géométrie et la composition du matériau absorbant sont les deux paramètres qui influencent la capacité d’absorption de l’onde électromagnétique par un matériau. Ce seront donc les deux pistes d’optimisation explorés durant cette thèse. Notre but est d’obtenir les absorbants présentant les plus faibles coefficients de réflexion et de transmission, soit une absorption élevée, ceci dans une large bande de fréquence. / The electromagnetic absorber materials are important elements for evaluating various electronic and civil systems. These materials are used, for example, for minimizing electromagnetic interferences (EMI) in different wireless components, for minimizing the radar cross section (RCS) or for usage in anechoic chambers. The latter application is the targeted work in this thesis. The objective of this work is to optimize the absorber materials used in anechoic chambers. The geometry and the material composition are the two parameters that influence the absorption of the electromagnetic wave inside the material itself. This are the two topics of optimization explored in this thesis. Our objective is to obtain material absorbers that have low reflection and transmission coefficients and high absorption in a large frequency band.

This thesis contains three papers investigating problems of interest for noise control in ducts. The first part of this thesis treats the sound propagation in rectangular ducts with flexible walls. Various experimental techniques are performed to measure the internal sound propagation and radiation to the surrounding. An analytical model is derived to calculate the coupled propagation wavenumber and radiated sound power. The two-port formalism is used. The second part starts with the sound propagation in open ended circular straight pipe with airflow (a tailpipe). Various aspects such as: acoustic damping, reflection and transmission at the open termination are investigated. Sound absorption due to vorticity shed at the opening is also treated. The geometry of the opening is then modified (oblique cuts, diffusers) and comparisons with the reference straight pipe is made for the sound transmission and flow induced noise generation. The effect of an upstream bend close to the opening is also investigated. In the third part the acoustic impedance of perforated plates are investigated. In particular the application to small perforation ratios ( ≈ 1% ) and holes or slits with apertures of sub-millimetre size, so called micro-perforated plates, are of interest. Linear and non-linear regimes are investigated. A model is derived to calculate the linear acoustic impedance of perforated elements. / QC 20101111

Characteristic modes (CMs) provide deep insight into the electromagnetic behaviour of any arbitrarily shaped conducting structure because the CMs are unique to the geometry of the object. We exploit this very fact by predicting a perhaps surprising number of important antenna metrics such as resonance frequency, radiation efficiency and antenna Q (bandwidth) without needing to specify a feeding location. In doing so, it is possible to define a collection of objective functions that can be used in an optimizer to shape-synthesize antennas without needing to define a feed location a priori. We denote this novel form of optimization “feedless” or “excitation-free” antenna shape synthesis. Fundamentally, we are allowing the electromagnetics to dictate how the antenna synthesis should proceed and are in no way imposing the physical constraints enforced by fixed feeding structures. This optimization technique is broadly applied to three major areas of antenna research: electrically small antennas, multi-band antennas and reflectarrays. Thus, the scope of applicability ranges from small antennas, to intermediate sizes and concludes with electrically large antenna designs, which is a testament to the broad applicability of characteristic mode theory. Another advantage of feedless electromagnetic shape synthesis is the ability to synthesize antennas whose desirable properties approach the fundamental limits imposed by electromagnetics. As an additional benefit, the feedless optimization technique is shown to have greater computational efficiency than traditional antenna optimization techniques.

Characteristic modes (CMs) provide deep insight into the electromagnetic behaviour of any arbitrarily shaped conducting structure because the CMs are unique to the geometry of the object. We exploit this very fact by predicting a perhaps surprising number of important antenna metrics such as resonance frequency, radiation efficiency and antenna Q (bandwidth) without needing to specify a feeding location. In doing so, it is possible to define a collection of objective functions that can be used in an optimizer to shape-synthesize antennas without needing to define a feed location a priori. We denote this novel form of optimization “feedless” or “excitation-free” antenna shape synthesis. Fundamentally, we are allowing the electromagnetics to dictate how the antenna synthesis should proceed and are in no way imposing the physical constraints enforced by fixed feeding structures. This optimization technique is broadly applied to three major areas of antenna research: electrically small antennas, multi-band antennas and reflectarrays. Thus, the scope of applicability ranges from small antennas, to intermediate sizes and concludes with electrically large antenna designs, which is a testament to the broad applicability of characteristic mode theory. Another advantage of feedless electromagnetic shape synthesis is the ability to synthesize antennas whose desirable properties approach the fundamental limits imposed by electromagnetics. As an additional benefit, the feedless optimization technique is shown to have greater computational efficiency than traditional antenna optimization techniques.

Characteristic modes (CMs) provide deep insight into the electromagnetic behaviour of any arbitrarily shaped conducting structure because the CMs are unique to the geometry of the object. We exploit this very fact by predicting a perhaps surprising number of important antenna metrics such as resonance frequency, radiation efficiency and antenna Q (bandwidth) without needing to specify a feeding location. In doing so, it is possible to define a collection of objective functions that can be used in an optimizer to shape-synthesize antennas without needing to define a feed location a priori. We denote this novel form of optimization “feedless” or “excitation-free” antenna shape synthesis. Fundamentally, we are allowing the electromagnetics to dictate how the antenna synthesis should proceed and are in no way imposing the physical constraints enforced by fixed feeding structures. This optimization technique is broadly applied to three major areas of antenna research: electrically small antennas, multi-band antennas and reflectarrays. Thus, the scope of applicability ranges from small antennas, to intermediate sizes and concludes with electrically large antenna designs, which is a testament to the broad applicability of characteristic mode theory. Another advantage of feedless electromagnetic shape synthesis is the ability to synthesize antennas whose desirable properties approach the fundamental limits imposed by electromagnetics. As an additional benefit, the feedless optimization technique is shown to have greater computational efficiency than traditional antenna optimization techniques.

This work deals with the most famous constructions of planar antennas. The work analyses selected methods of connecting planar antennas' charging with the possibility of impedance adaptation. An important part of the work consists of description of techniques for increasing bandwidth and conversely techniques for reducing the dimensions which are important for the design of planar antennas for mobile devices. The antennas were designed by means of theoretical basis and their properties were examined in the electromagnetic field simulator. The selected antenna model was constructed and its parameters were measured experimentally. The matching circuit for the antenna to tune it to different resonant frequencies was designed and constructed.

The theory of stretching and compressing of short light pulses by the chirped volume Bragg gratings (CBG) is reviewed based on spectral decomposition of short pulses and on the wavelength-dependent coupled wave equations. The analytic theory of diffraction efficiency of a CBG with constant chirp and approximate theory of time delay dispersion are presented. Based on those, we performed comparison of the approximate analytic results with the exact numeric coupled-wave modeling. We also study theoretically various definitions of laser beam width in a given cross-section. Quality of the beam is characterized by the dimensionless beam propagation products (?x???_x)?? , which are different for each of the 21 definitions. We study six particular beams and introduce an axially-symmetric self-MFT (mathematical Fourier transform) function, which may be useful for the description of diffraction-quality beams. Furthermore, we discuss various saturation curves and their influence on the amplitudes of recorded gratings. Special attention is given to multiplexed volume Bragg gratings (VBG) aimed at recording of several gratings in the same volume. The best shape of a saturation curve for production of the strongest gratings is found to be the threshold-type curve. Both one-photon and two-photon absorption mechanism of recording are investigated. Finally, by means of the simulation software we investigate forced airflow cooling of a VBG heated by a laser beam. Two combinations of a setup are considered, and a number of temperature distributions and thermal deformations are obtained for different rates of airflows. Simulation results are compared to the experimental data, and show good mutual agreement.

Within the military there is great need for reliable communication between vehicles. During the planning and construction of a military RIB, Rigid-hulled Inflatable Boat, it is important to design an efficient antenna system that does not deteriorate out of disorder. It must also be ensured that the antennas transmitted power does not stay in the RIB boat. We have been given assignment to model and simulate a proposed antenna system and assess which tool is best suitable for the task. To analyze the antenna system we will look at the radiated electrical field together with the reflectionand EMC properties. The tool that we choose to use is a software called EMPro produced by Keysight Technologies. In this program we will create 3Dstructures for each individual object, the boat, the three antennas and the seawater. It’s also important to include each objects properties concerning material, so that they correctly reflect the reality. We are covering a broad spectrum with our antennas reaching from 1.6-30MHz, 30-88MHz and 100512MHz. The resulting simulation verifies that electromagnetic field would be powerful enough and that the antennas would not affect each other with the proposed placement. We could also confirm that our antennas reflected an inordinate amount of power but with cause that our models were not an exact replica of the antenna. The software EMPro is a suitable tool for this kind of projects concerning modeling and simulating antenna systems.Within the military there is great need for reliable communication between vehicles. During the planning and construction of a military RIB, Rigid-hulled Inflatable Boat, it is important to design an efficient antenna system that does not deteriorate out of disorder. It must also be ensured that the antennas transmitted power does not stay in the RIB boat. We have been given assignment to model and simulate a proposed antenna system and assess which tool is best suitable for the task. To analyze the antenna system we will look at the radiated electrical field together with the reflectionand EMC properties. The tool that we choose to use is a software called EMPro produced by Keysight Technologies. In this program we will create 3Dstructures for each individual object, the boat, the three antennas and the seawater. It’s also important to include each objects properties concerning material, so that they correctly reflect the reality. We are covering a broad spectrum with our antennas reaching from 1.6-30MHz, 30-88MHz and 100512MHz. The resulting simulation verifies that electromagnetic field would be powerful enough and that the antennas would not affect each other with the proposed placement. We could also confirm that our antennas reflected an inordinate amount of power but with cause that our models were not an exact replica of the antenna. The software EMPro is a suitable tool for this kind of projects concerning modeling and simulating antenna systems. / Inom militären finns stort behov av pålitlig kommunikation mellan fordon. Vid konstruktion av ett småfartyg i militärtoch bevakningssyfte är det viktigt att designa ett välfungerande antennsystem som inte försämras utav störningar, det ska även ses till att antennernas utsända effekt inte fastnar i småfartyget. Vi har fått en ritning av hur antennplaceringen är planerad, denna rapport går ut på att verifiera dess funktionalitet samt hitta en mjukvara som kan användas för att verifiera olika antennsystem. För att bedöma antennsystemet kommer denna rapport att undersöka att dess elektriska fält samt reflektionsoch EMC egenskaper, en uppgift som kan lösas med programvaran EMPro (Keysight). I programvaran skapas en 3Dstruktur som innehåller småfartyget, dess 3 stycken antenner samt omfattande havsvatten. Här tas hänsyn till objektens materialegenskaper, antennernas jordning samt de frekvenser antennerna arbetar på, 1.6-30MHz, 30-88MHz samt 100-512MHz. Simulering av systemet gav positiva resultat kring antennsystemets elektromagnetiskafält, antennerna kommer inte heller att störa varandra. Antennerna som vi har modellerat reflekterar orimligt mycket effekt, detta bortser vi från då vi inte haft tillgång till exakt avbildning av antennerna. EMPro är ett verktyg som är lämpligt att använda i detta samt liknande projekt. Dock krävs det att en kraftig dator finns tillgänglig då simuleringar av stora antennsystem baseras på stora uträkningar, som generellt tar lång tid.