Made available in DSpace on 2014-12-17T14:55:12Z (GMT). No. of bitstreams: 1 HumbertoDA_TESE.pdf: 4762435 bytes, checksum: 20aae983d6895db90a85b0e2b107200f (MD5) Previous issue date: 2013-09-02 / Coordena??o de Aperfei?oamento de Pessoal de N?vel Superior / In the globalized world modern telecommunications have assumed key role within the company, causing a large increase in demand for the wireless technology of communication, which has been happening in recent years have greatly increased the number of applications using this technology. Due to this demand, new materials are developed to enable new control mechanisms and propagation of electromagnetic waves. The research to develop new technologies for wireless communication presents a multidisciplinary study that covers from the new geometries for passive antennas, active up to the development of materials for devices that improve the performance at the frequency range of operation. Recently, planar antennas have attracted interest due to their characteristics and advantages when compared with other types of antennas. In the area of mobile communications the need for antennas of this type has become increasingly used, due to intensive development, which needs to operate in multifrequency antennas and broadband. The microstrip antennas have narrow bandwidth due to the dielectric losses generated by irradiation. Another limitation is the degradation of the radiation pattern due to the generation of surface waves in the substrate. Some techniques have been developed to minimize this limitation of bandwidth, such as the study of type materials PBG - Photonic Band Gap, to form the dielectric material. This work has as main objective the development project of a slot resonator with multiple layers and use the type PBG substrate, which carried out the optimization from the numerical analysis and then designed the device initially proposed for the band electromagnetic spectrum between 3-9 GHz, which basically includes the band S to X. Was used as the dielectric material RT/Duroid 5870 and RT/Duroid 6010.LM where both are laminated ceramic-filled PTFE dielectric constants 2.33 and 10.2, respectively. Through an experimental investigation was conducted an analysis of the simulated versus measured by observing the behavior of the radiation characteristics from the height variation of the dielectric multilayer substrates. We also used the LTT method resonators structures rectangular slot with multiple layers of material photonic PBG in order to obtain the resonance frequency and the entire theory involving the electromagnetic parameters of the structure under consideration. xviii The analysis developed in this work was performed using the method LTT - Transverse Transmission Line, in the field of Fourier transform that uses a component propagating in the y direction (transverse to the real direction of propagation z), thus treating the general equations of the fields electric and magnetic and function. The PBG theory is applied to obtain the relative permittivity of the polarizations for the sep photonic composite substrates material. The results are obtained with the commercial software Ansoft HFSS, used for accurate analysis of the electromagnetic behavior of the planar device under study through the Finite Element Method (FEM). Numerical computational results are presented in graphical form in two and three dimensions, playing in the parameters of return loss, frequency of radiation and radiation diagram, radiation efficiency and surface current for the device under study, and have as substrates, photonic materials and had been simulated in an appropriate computational tool. With respect to the planar device design study are presented in the simulated and measured results that show good agreement with measurements made. These results are mainly in the identification of resonance modes and determining the characteristics of the designed device, such as resonant frequency, return loss and radiation pattern / No mundo globalizado moderno, as telecomunica??es assumiram um papel fundamental dentro das sociedades, provocando um grande aumento da demanda por tecnologia de comunica??o sem fio, isto vem acontecendo nos ?ltimos anos e tem aumentado bastante o n?mero de aplica??es que utilizam esta tecnologia. Em decorr?ncia dessa demanda, novos materiais s?o desenvolvidos no sentido de possibilitar novos mecanismos de controle e propaga??o de ondas eletromagn?ticas. A pesquisa para o desenvolvimento de novas tecnologias para comunica??o sem fios apresenta um car?ter multidisciplinar que abrange desde o estudo de novas geometrias para antenas passivas e ativas at? o de desenvolvimento de materiais para dispositivos que melhorem o desempenho naquela faixa de frequ?ncia de opera??o. Recentemente as antenas planares tem despertado interesses devido as suas caracter?sticas e vantagens que oferecem quando comparadas com os demais tipos de antenas. Na ?rea de comunica??es m?veis a necessidade de antenas desse tipo tem se tornado cada vez maior, devido ao seu intenso desenvolvimento, que necessita de antenas que operem em multifrequ?ncia e em banda larga. As antenas de microfita apresentam largura de banda estreita devido ?s perdas no diel?trico geradas pela irradia??o. Outra limita??o ? a degrada??o do diagrama de irradia??o devido ? gera??o de ondas de superf?cie no substrato. Algumas t?cnicas est?o sendo desenvolvidas para minimizar esta limita??o de banda, como ? o caso do estudo de materiais do tipo PBG Photonic Band Gap, para compor o material diel?trico. Este trabalho tem como objetivo principal o desenvolvimento do projeto de um ressoador de fenda com m?ltiplas camadas e com a utiliza??o de substrato do tipo PBG, onde foi realizada a otimiza??o a partir da analise num?rica e em seguida, projetado o dispositivo proposto inicialmente para a faixa do espectro eletromagn?tico compreendida entre 3-9 GHz, que inclui basicamente a banda S at? X. Foi utilizado como material diel?trico o RT/Duroid 5870 e RT/Duroid 6010.2LM onde ambos s?o laminados cer?micos PTFE com constantes diel?tricas de 2.33 e 10.2, respectivamente. Atrav?s de uma investiga??o experimental foi realizada uma an?lise dos resultados simulados versus medidos observando o comportamento das xvi caracter?sticas de radia??o a partir da varia??o da altura das multicamadas de subtrato diel?trico. Foi utilizado tamb?m o m?todo LTT ?s estruturas ressoadoras retangulares de fenda com m?ltiplas camadas, para a obten??o da freq??ncia de resson?ncia bem como toda a teoria que envolva os par?metros eletromagn?ticos da estrutura em estudo. As an?lises desenvolvidas neste trabalho foram realizadas com utiliza??o do m?todo LTT Linha de Transmiss?o Transversa, no dom?nio da Transformada de Fourier que utiliza uma componente de propaga??o na dire??o y (transversa ? dire??o real de propaga??o z), tratando assim as equa??es gerais dos campos el?tricos e magn?ticos em fun??o de yE e yH . A teoria PBG ser? aplicada para a obten??o da permissividade relativa para as polariza??es s e p dos substratos compostos de material fot?nico. Os resultados s?o obtidos com o software comercial Ansoft HFSS, usado para a an?lise precisa do comportamento eletromagn?tico do dispositivo planar em estudo, por meio do M?todo dos Elementos Finitos (FEM). Resultados num?rico-computacionais s?o apresentados em forma de gr?fico em duas e tr?s dimens?es, para aos par?metros de perda de retorno, frequ?ncia de radia??o, e diagrama de radia??o, efici?ncia de radia??o e densidade superficial de corrente para o dispositivo em estudo, e que tem como substratos, materiais fot?nicos e que fora simulado em uma ferramenta computacional apropriada. . No que diz respeito ao projeto do dispositivo planar em estudo s?o apresentados os resultados medidos e os simulados que apresentam boa concord?ncia com as medi??es efetuadas. Estes resultados consistem principalmente na identifica??o dos modos de resson?ncia e na determina??o das caracter?sticas do dispositivo projetado, como freq??ncia de resson?ncia, perda de retorno e diagrama de radia??o

Made available in DSpace on 2014-12-17T14:55:13Z (GMT). No. of bitstreams: 1 JoemiaLGMM_TESE.pdf: 3140610 bytes, checksum: 8bdf88d29c888d95e74fd24e403e60fc (MD5) Previous issue date: 2013-06-07 / Coordena??o de Aperfei?oamento de Pessoal de N?vel Superior / Ceramic substrates have been investigated by researchers around the world and has achieved a high interest in the scientific community, because they had high dielectric constants and excellent performance in the structures employed. Such ceramics result in miniaturized structures with dimensions well reduced and high radiation efficiency. In this work, we have used a new ceramic material called lead zinc titanate in the form of Zn0,8Pb0,2TiO3, capable of being used as a dielectric substrate in the construction of various structures of antennas. The method used in constructing the ceramic combustion synthesis was Self- Sustained High Temperature (SHS - "Self-Propagating High-Temperature Synthesis") which is defined as a process that uses highly exothermic reactions to produce various materials. Once initiated the reaction area in the reaction mixture, the heat generated is sufficient to become self-sustaining combustion in the form of a wave that propagates converting the reaction mixture into the product of interest. Were analyzed aspects of the formation of the composite Zn0,8Pb0,2TiO3 by SHS powders and characterized. The analysis consisted of determining the parameters of the reaction for the formation of the composite, as the ignition temperature and reaction mechanisms. The production of composite Zn0,8Pb0,2TiO3 by SHS performed in the laboratory, was the result of a total control of combustion temperature and after obtaining the powder began the development of ceramics. The product was obtained in the form of regular, alternating layers of porous ceramics and was obtained by uniaxial pressing. 10 The product was characterized by analysis of dilatometry, X-ray diffraction analysis and scanning electron microscopy. One of the contributions typically defined in this work is the development of a new dielectric material, nevertheless presented previously in the literature. Therefore, the structures of the antennas presented in this work consisted of new dielectric ceramics based Zn0,8Pb0,2TiO3 usually used as dielectric substrate. The materials produced were characterized in the microwave range. These are dielectrics with high relative permittivity and low loss tangent. The Ansoft HFSS, commercial program employee, using the finite element method, and was used for analysis of antennas studied in this work / Substratos cer?micos t?m sido investigados por pesquisadores de todo o mundo e tem despertado um grande interesse na comunidade cient?fica, pelo fato de apresentarem altas constantes diel?tricas e um excelente desempenho nas estruturas empregadas. Tais cer?micas resultam em estruturas miniaturizadas, com dimens?es bem reduzidas e de alta efici?ncia de radia??o. Neste trabalho, utilizou-se um novo material cer?mico, chamado de titanato de zinco chumbo, na forma de Zn0,8Pb0,2TiO3, capaz de ser utilizado como substrato diel?trico na constru??o de diversas estruturas de antenas. O m?todo utilizado na constru??o da cer?mica foi a S?ntese por Combust?o Auto-Sustentada a Alta Temperatura (SHS Self-Propagating High-Temperature Synthesis ) que ? definido como um processo que utiliza rea??es altamente exot?rmicas para produzir os mais diversos materiais. Uma vez iniciada a rea??o numa ?rea da mistura reagente, o calor gerado ? suficiente para tornar a combust?o auto-sustent?vel, na forma de uma onda que se propaga convertendo a mistura reagente no produto de interesse. Foram analisados os aspectos da forma??o do comp?sito Zn0,8Pb0,2TiO3 por SHS e os p?s obtidos, foram caracterizados. A an?lise consistiu na determina??o dos par?metros da rea??o para a forma??o do comp?sito, como a temperatura de igni??o e os mecanismos de rea??o. A produ??o do comp?sito Zn0,8Pb0,2TiO3 por SHS, realizada em laborat?rio, foi resultado de um controle total da temperatura de combust?o e ap?s a obten??o do p? 8 iniciou-se o desenvolvimento das cer?micas. O produto foi obtido na forma de camadas regulares e altern?ncia de porosidades e as cer?micas foram obtidas por prensagem uniaxial. O produto foi caracterizado atrav?s de an?lises de dilatometria, difra??o de raios-X e an?lise de microscopia de varredura eletr?nica. Uma das contribui??es principais deste trabalho foi o desenvolvimento de um novo material diel?trico, n?o obstante apresentado anteriormente na literatura. Portanto, as estruturas das antenas apresentadas neste trabalho foram constitu?das por novas cer?micas diel?tricas ? base de Zn0,8Pb0,2TiO3, geralmente utilizado como substrato diel?trico. Os materiais desenvolvidos foram caracterizados na faixa de micro-ondas. S?o substratos diel?tricos de alta permissividade relativa e baixa tangente de perda. O software comercial empregado, Ansoft HFSS, baseado no m?todo dos elementos finitos, foi utilizado na an?lise das antenas estudadas neste trabalho

La détection sensible et sélective des métaux lourds, en particulier les métaux detransition, est d’une grande importance pour la santé publique ainsi que pour la surveillancede l’environnement. Les méthodes actuelles de référence, de par leur non portabilité, limitentla possibilité de disposer de mesures à haute résolution spatiale et temporelle. Lesmicrocapteurs optiques offrent un moyen attrayant et pratique pour surmonter ces limitationsde coût global et de temps d’analyse, en permettant la mesure en temps réel sur site.Pour démontrer ce potentiel, ces travaux de thèse sont orientés sur la détermination duchrome hexavalent Cr(VI) en solution à l’aide d’une réaction colorimétrique avec le 1,5-diphénylcarbazide (DPC), permettant de créer un complexe présentant un maximumd’absorption dans le domaine du visible. Ces travaux s’inscrivent dans la volonté dedévelopper un véritable laboratoire sur puce, intégrant la fonction fluidique parélectromouillage sur diélectrique pour créer la réaction colorimétrique, ainsi que la fonctionde mesure par intégration d’un capteur optique dédié à la mesure d’absorption dans desmicrovolumes (< μL). Pour la mesure d'absorption sur de si faibles volumes, l'utilisation demicrorésonateurs vise à augmenter de façon importante le chemin optique effectif et ainsi lasensibilité du capteur.Nous décrivons nos travaux sur la conception, la fabrication de la plateformemicrofluidique digitale ainsi que du résonateur optique en anneaux à des dimensionssubmicroniques par photolithographie par projection. Les matériaux polymères sontprivilégiés pour une intégration totale bas coût à terme, ainsi qu’un substrat verre, dont lespropriétés sont particulièrement adaptées aux applications optiques dans le domaine duvisible. / The selective and sensitive detection of heavy metals, such as transition metals, is ofparamount importance for health and safety an environmental monitoring. Current referencemethods, due to their lack of portability, are limiting factors to obtain high-resolution spatialand temporal data. Optical sensors offer an attractive and convenient way to overcome theselimitations of cost and time per analysis by offering real time, on-site measurementcapabilities.In order to demonstrate this potential, this thesis is focused on the detection and quantificationof hexavalent chromium Cr(VI) in water samples by a colorimetric reaction based on areaction with the 1,5-diphenylcarbazide (DPC), that produces a complex possessing anabsorption maximum in the visible range. This works endorse the goal of creating a true labon-chip, integrating both the fluidic function based on ElectroWetting on Dielectric (EWOD)to create the colorimetric reaction, and the sensing function based on the integration of anoptical sensor able to measure absorption variations in micro-volumes (< μL). In order toobtain sufficient sensitivity on such small volumes, optical microring resonators are used inthis work, due to their ability to enhance the effective optical path length by constructiveinterferences.This thesis describes the conception and fabrication of the EWOD microfluidic platform, aswell as the conception, simulation and fabrication of submicronic microring resonators usingstepper lithography. Polymer materials and glass substrates are selected, due to their greatoptical properties in the visible range, their compatibility with the EWOD platform, and theirintegrability at a reasonable cost.

Les capteurs résonants de type M/NEMS sont largement utilisés dans l’environnement biologique pour la mesure de masse de biomolécules en raison de leur grande précision combinée à une taille réduite. Classiquement, la détection et la quantification se basent sur le décalage fréquentiel induit par la masse ajoutée. Toutefois, ce décalage devient très faible et difficile à distinguer du bruit de mesure lorsque les masses considérées sont très petites. Il est théoriquement possible de gagner encore un ou plusieurs ordres de grandeur en résolution avec ces méthodes fréquentielles en diminuant encore les tailles et/ou en augmentant le rapport signal sur bruit, c’est-à-dire en actionnant de manière plus importante les résonateurs. Mais, dans ces conditions, les nanorésonateurs ont un comportement très fortement non-linéaire, source d’instabilités et de mixage de bruit basses et hautes fréquences susceptibles de dégrader la fiabilité et la précision des mesures. C’est pourquoi cette thèse a pour objectif de définir des principes de détection alternatifs basés sur l’exploitation des phénomènes non-linéaires, tels que les comportements hystérétiques et les bifurcations des courbes de réponse en fréquence. Pour cela, un modèle réduit de micro/nano-poutre résonante avec actionnement électrostatique est considéré. Les résultats numériques montrent que les brusques sauts d’amplitude à proximité des points de bifurcation permettent la détection de masses très faibles. Contrairement à la détection fréquentielle, ces sauts sont d’autant plus grands que la masse additionnelle est petite, ce qui rend cette technique particulièrement intéressante. De plus, le seuil de détection peut être ajusté avec la valeur de la fréquence de fonctionnement. Un mécanisme de réinitialisation est toutefois indispensable pour rendre la détection à nouveau possible après un saut d’amplitude. Afin d’automatiser la réinitialisation et ainsi permettre la détection en temps réel, un concept totalement innovant de détection de masse par balayage en fréquence des cycles d’hystérésis est proposé, qui permet de détecter, quantifier et localiser la masse ajoutée sur la poutre résonante. La mise en réseau de plusieurs poutres résonantes est également traitée et constitue un premier pas vers la mise en oeuvre de réseaux de milliers de capteurs. Pour cela, des architectures efficaces sont proposées et les modèles numériques sont adaptés en conséquence. Sur des configurations symétriques, l’exploitation des bifurcations de type brisure de symétrie permet là-encore d’améliorer la détection de masse. / Resonant M/NEMS mass sensors are widely used in biological environment for measuring the mass of biomolecules due to their high accuracy combined with a reduced size. Usually, the detection and the quantification are based on the frequency shift induced by an added mass. However, this shift becomes very small and difficult to distinguish from the noise of measurement as the considered masses are tiny. It is theoretically possible to increase further one or several orders of magnitude in resolution with these frequency methods by further reducing size and/or by increasing the signal-to-noise ratio, that is to say by operating more importantly the resonators. But in these conditions, the nanoresonators have a strongly nonlinear behavior, a source of instability and noise mix of low and high frequencies likely to degrade the reliability and the accuracy of measurements. Therefore, the thesis’s objective is to define alternative principles of detection based on exploiting the nonlinear phenomena, such as the hysteretic behavior and the bifurcations of frequency-response curves. To this end, a reduced model of resonant micro/nano-beam with electrostatic actuation is considered. The numerical results show that the sudden jumps in amplitude close to bifurcation points allow the detection of very small masses. Unlike the frequency detection, the smaller the added mass, the larger the increase of the jump, which makes this technique particularly interesting. In addition, the detection threshold can be adjusted with the value of the operating frequency. However, a mechanism of reinitialization is mandatory to make the detection possible again after a jump in amplitude. In order to automate the reinitialization and allow the detection in real-time, a completely innovative concept of mass detection by the frequency sweep of the hysteretic cycles is proposed to detect, quantify and locate the added mass on the resonant beam. An array of several resonant beams is also considered and constitutes a first step toward the implementation of arrays of thousands of sensors. Efficient architectures are proposed for this purpose and the numerical models are adapted accordingly. On symmetric configurations, exploiting the bifurcations of symmetry-breaking type allows here again to improve the mass detection.

Un développement technologique rapide dans le domaine de télécommunication, qu'il s'agisse de la téléphonie mobile, des réseaux sans fils, de la télévision par satellites, ou des applications radar (civiles ou militaires)...etc. est observé. Cet essor considérable a engendré d'énormes besoins et entraîne une évolution technologique majeure au niveau des antennes. Ces dernières doivent faire face aux différentes exigences, à savoir l'augmentation du gain, l'élargissement de la bande passante… et aux différents problèmes existant, à savoir le coût, l’encombrement…etc. Notre objectif est donc de concevoir des topologies d’antennes simples, à faible encombrement et à gain relativement élevé avec un fonctionnement multibande et/ou ultra large bande. Pour cela nous nous sommes orientés vers des antennes à résonateur diélectrique (ARD) dans les bandes UHF et SHF. Récemment, elles ont fait l’objet de plusieurs recherches et ont acquis un grand intérêt du monde académique et industriel. Les ARDs, par leurs simples et diverses géométries, peuvent être alimentées par différentes usuelles techniques. En outre, leurs tailles peuvent être plus petites que leurs homologues à savoir les antennes imprimées. Une première partie de ce travail s’est concentré sur l’étude des ARDs de forme cylindrique, puis une validation de l’outil de simulation par comparaison avec la mesure. En vue d’une utilisation multistandards, d’un élargissement des bandes de fonctionnement ou d’une modification de la fréquence, une seconde partie a été consacrée à l’étude de nouvelles topologies de résonateurs basées sur un empilement vertical et radial de deux cylindres, une topologie en multicouche et en anneau. Les résultats obtenus trouvent leurs applications dans le GSM900-DSC1800, UMTS, WIFI… / A fast technological development in the telecommunications domain, as mobile telephony, wireless networks, TV over Satellite, Radar Applications (civil or military)…etc, is observed. This considerable growth has led to enormous needs and caused a major technological evolution in antennas. These have to face different needs such as gain improvement, bandwidth enlargement, and different existing problems, such as cost and overcrowding…etc. Though, our goal is to design antenna topologies that are simple, having Low overcrowding and relatively with high gain operating in multiband and/or ultra large. To achieve this we headed to Dielectric Resonator Antennas (DRA) in UHF and SHF bands. Recently they have been the subject of several studies and have gained great interest from both academic and industrial sectors. Due to their diverse and simple geometries, they can be fed with different usual techniques. Furthermore, they can be smaller than patch antennas. The first part of this work has focused on the study of cylindrical DRAs, and then a validation of the simulating tool has been done after comparison with measurement results. For a multi-standard utilization, enlargement antennas’ operating bands, to have bi-band behaviour, get a modification of the resonant frequency and also a reduction of the overcrowding, the second part is dedicated to the study of new resonator topologies based on a vertical and radial stack of two cylinders, and then a multilayer and ring topologies. The obtained results found their applications in GSM900-DCS1800-UMTS-WiFi…

Les antennes à pointage électronique présentent des avantages significatifs dans les systèmes de communication sans fil. Malgré cela elles ne sont toujours pas implantées dans l'industrie automobile. En effet, l'espace limité et le toit en grande partie métallique freinent l’utilisation de ces aériens dans ce contexte contraint. De nombreux défis restent à relever pour concevoir un système efficace, peu encombrant, faible coût et permettant de rayonner sur 360°. L’objectif de cette thèse est donc la mise au point d’une antenne à balayage électronique pour application automobile fonctionnant dans la bande LTE. Un système de «type MIMO » est proposé. Une antenne à résonateur diélectrique efficace, multi-bandes et efficace est conçue selon une procédure de développement spécifique. Un déphaseur accordable est également mis au point et réalisé. Il utilise des commutateurs et un condensateur variable. Un déphasage de 360 degrés est obtenu, le dispositif est commandé électriquement. L’antenne et le déphaseur sont ensuite associés dans un système complet fonctionnant dans la bande LTE. Celui-ci utilise deux antennes identiques, une seule étant alimentée. Ce système complet est mesuré seul et sur le véhicule. Les résultats obtenus sont prometteurs et permettent d’envisager, moyennant quelques améliorations, une exploitation industrielle. Les études menées pour aboutir à ce dispositif sont détaillées dans le manuscrit. / Even though beam steering technology has significant advantages in wireless communication systems, it is still not implemented in the automotive industry. Indeed, the limited space and the large metal sheet on the rooftop are the challenges for such system. This thesis is focused on the design of the LTE beam steering antenna based on a MIMO system for an automotive environment. An appropriate multiband, efficient and compact Dielectric Resonator Antenna is conceived using a specific development procedure. Also, a tunable phase shifter is designed and realized with switches and a variable capacitor. It has 360 degrees phase shift and can be electrically controlled. The proposed DRA and phase shifter are integrated in a global antenna system for automotive application in the LTE band. We finally propose a MIMO system with an active beam steering radiation pattern. It is very compact and can be implemented on the vehicle rooftop. Using the proposed phase shifter, a beam steering antenna is obtained with a global coverage close to 360� for the antenna alone or on the vehicle. Measurements are made in the using context of the antenna. Finally, the developed system is, with some improvement, powerful for powerful enough for "commercial" automotive applications. The studies carried out to develop this antenna are detailed in this manuscript.

Silicon photonics as a one of the most promising photonic integration technologies has attracted many attentions in recent years. The major feature of this technology is its compatibility with complementary metal-oxide semiconductor (CMOS) processes which makes it possible to integrate optical and electronic devices in a same chip and reduce the cost significantly. Another reason of using silicon photonics is the high index contrast between the silicon core and silicon dioxide cladding which ensures the high density integration of photonic devices on a single chip. Monolithic integration with electronic and optical circuits makes silicon photonics technology suitable for numerous applications. One example is microwave photonics (MWP). MWP is an area that studies the interaction between microwave and optical signal for the generation, processing, control and distribution of microwave signals by means of photonics. Silicon photonics offers a reduction in footprint, losses, packaging cost and power dissipation in MWP systems. This research in this thesis is focused on the design and fabrication of the silicon photonic devices for MWP signal processing and generation. Four MWP systems based on silicon photonic devices are proposed and experimentally demonstrated. 1) A single pass-band frequency-tunable MWP filter based on phase-modulation to intensity-modulation conversion in an optically pumped silicon-on-insulator (SOI) microring resonator (MRR) is designed and experimentally demonstrated. In the proposed filter, a phase-modulated optical signal is filtered by the SOI MRR, to have one first-order sideband suppressed by the MRR notch. The phase-modulated optical signal is converted to an intensity-modulated single-sideband (SSB) signal and detected at a photodetector (PD). The entire operation is equivalent to a single pass-band filter. The frequency tunability is achieved by tuning the resonance wavelength of the MRR, which is realized by optically pumping the MRR. A single pass-band MWP filter with a tunable center frequency from 16 to 23 GHz is experimentally demonstrated. 2) A broadband optically tunable MWP phase shifter with a tunable phase shift using three cascaded SOI MRRs that are optically pumped is designed and experimentally demonstrated. A microwave signal to be phase shifted is applied to an optical single-sideband (OSSB) modulator to generate an optical carrier and an optical sideband. The phase shift is introduced to the optical carrier by placing the optical carrier within the bandwidth of one resonance of the three cascaded MRRs. The experimental results show that by optically pumping the cascaded MRRs, a broadband MWP phase shifter with a bandwidth of 7 GHz with a tunable phase shift covering the entire 360o phase shift range is achieved. 3) A multi tap MWP filter with positive and negative coefficients using a silicon ring resonator modulator (RRM) is proposed and experimentally demonstrated. The RRM is designed and fabricated to operate based on the carrier depletion effect. The positive and negative coefficients are obtained by using opposite slopes of the modulation transmission response of the RRM. Two filter responses with two and three taps are experimentally demonstrated, showing the proof-of-principle for frequencies up to 18 GHz. 4) An approach to generate microwave signal based on enhanced four wave mixing (FWM) in an active silicon waveguide (SiWG) is studied. This SiWG is designed and fabricated, and the use of the active SiWG for MWP frequency multiplication to generate a frequency-sextupled millimeter-wave signal is experimentally demonstrated. Thanks to a reverse-biased p-n junction across the SiWG, the conversion efficiency of the FWM is improved, which leads to the improvement of the microwave frequency multiplication efficiency.

Ce travail porte sur l'étude de propriétés optiques des fluides à échelle micrométrique. A cet effet, nous avons conçu, réalisé et étudié différents types de micro-résonateurs optofluidiques, sous forme de laboratoires sur puce. Notre analyse est fondée sur la modélisation analytique et numérique, ainsi que sur des mesures expérimentales menées sur des micro-cavités optiques; nous utilisons l'une d'entre elles pour des applications de réfractométrie de fluides homogènes et de fluides complexes ainsi que pour la localisation par piégeage optique de microparticules solides. Nous nous sommes d'abord concentrés sur l'étude d'une nouvelle forme de micro-cavité Fabry-Pérot basée sur des miroirs courbes entre lesquels est inséré un tube capillaire permettant la circulation d'une solution liquide. Les résultats expérimentaux ont démontré la capacité de ce dispositif à être utilisé comme réfractomètre avec un seuil de détection de 1,9 × 10-4 RIU pour des liquides homogènes. De plus, pour un liquide contenant des particules solides, la capacité de contrôler la position des microparticules, par des effets de piégeage optique ou de liaison optique, a été démontrée avec succès. Dans un second temps, un résonateur optique est formé simplement à partir d'une goutte de liquide disposée sur une surface super-hydrophobe. La forme quasi-sphérique résultante est propice à des modes de galerie. Il est démontré que, jusqu'à des tailles de gouttelettes millimétriques, la technique de couplage en espace libre est toujours en mesure d'accéder à ces modes à très faible queue évanescente d'interaction, contrairement à ce qu'indiquait jusqu'ici la littérature. De tels résonateurs optofluidiques à gouttelette devraient trouver leur application notamment comme capteur d'environnement de l'air ambiant ou encore comme incubateur de micro-organismes vivants pouvant être suivis par voie optique / This work focuses on the study of optical properties of fluids at the micrometer scale. To this end, we designed, implemented and studied different types of optofluidic micro- resonators in the Lab-on-Chip format. Our analysis is based on analytical and numerical modeling, as well as experimental measurements conducted on optical microcavities; we use one of them for refractometry applications on homogeneous fluids and on complex fluids, as well as for the localization of solid microparticles by optical trapping. We first focused on the study of a new form of Fabry-Perot micro-cavity based on curved mirrors between which a capillary tube is inserted for injecting a fluidic solution. Experimental results demonstrated the ability of this device to be used as a refractometer with a detection limit of 1.9 × 10-4 RIU for homogeneous liquids. Furthermore, for liquid containing solid particles, the ability to control the microparticles position either by optical trapping or optical binding effects has been successfully demonstrated. In a second step, an optical resonator is simply formed from a liquid droplet placed on top of a superhydrophobe surface. The resulting quasi-spherical shape supports resonant whispering gallery modes. It is shown that, up to millimeter size droplets, the proposed technique of free-space coupling of light is still able to access these modes with very low evanescent tail interaction, contrary to what was indicated in the literature so far. Such optofluidic droplet resonators are expected to find their applications for environmental air quality monitoring, as well as for incubator of living micro-organisms that can be monitored optically

The Theory of Characteristic Modes is being adopted by many research groups around the world in the last decade. This topic and their use in different metallic antenna design is growing very fast. However, most of the applications has been only concentrated on conducting surfaces without any physical knowledge about its limitations and its physical interpretation. As far as dielectric bodies are concerned, there have not been so many published articles. The reason is that there are different integro-differential formulations and the interpretation of their solutions is not as obvious as in conducting bodies. Here, a theoretical interpretation considering loss-less conducting and dielectric bodies is presented. The conclusions drawn in this thesis will allow us to better understand the solutions of the Theory of Characteristic Modes and their limitations. This is important for antenna engineering. In addition, this analysis will allow to develop a novel method for the design of antennas based on dielectric resonators, DRA. This method is called Substructure based-PMCHWT method, and is based on the implementation of the Schur complements of the method of moments matrix operator. This study permits to optimize the radiation bandwidth in the same analysis process for both, the dielectric and the feed, e.g. slot. Moreover, it allows to understand how the slot behaves in the presence of the dielectric resonator and vice versa. This method can also be used to design DRA using low permittivities. This is important in the design of DRA because the feed perturbs the system and produces a shift in the resonances of the characteristic modes. So, therefore, by considering the feed system in the characteristic modes analysis a more realistic results than a conventional analysis is obtained. On the other hand, the resonances of the characteristic modes at low permittivities are displaced from what are the natural resonances of the dielectric resonator and also the corresponding S11 resonance. Thus, designing with this new method it can draw new conclusions about the design of DRA using the Theory of Characteristic Modes. / En la última década, la teoría de los modos característicos está siendo utilizada por muchos grupos de investigación en todo el mundo. Este tema y su uso en diferentes diseños de antenas metálicas está creciendo muy rápido. Sin embargo, la mayoría de las aplicaciones se han concentrado únicamente en antenas metálicas sin ningún conocimiento físico acerca de sus limitaciones y su interpretación física. En lo que se refiere a cuerpos dieléctricos, no han habido tantos artículos publicados como en metales. La razón es que existen diferentes formulaciones integro-diferenciales y la interpretación de sus soluciones no es tan obvia como en cuerpos metálicos. En esta tesis se presenta una interpretación física de las soluciones de la Teoría de Modos Característicos al considerar cuerpos metálicos y dieléctricos sin pérdidas. Las conclusiones de esta tesis nos permitirán comprender mejor las soluciones de la Teoría de Modos Característicos y sus limitaciones. Esto es importante en ingeniería de antenas. Además, este análisis permitirá desarrollar un nuevo método para el diseño de antenas basadas en resonadores dieléctricos, DRA. Este método está basado en la formulación PMCHWT y la función de Green multicapa utilizada en el método de los momentos (MoM). A este nuevo método se le ha denominado "Substructure Characteristic Mode method", y está basado en la implementación de los complementos Schur sobre las submatrices del operador del MoM. Este estudio permite optimizar el ancho de banda de radiación de un DRA en el mismo proceso de análisis tanto para el dieléctrico como para la alimentación, como por ejemplo una ranura. Además, este método permite comprender como se comporta la ranura en presencia del resonador dieléctrico y viceversa. Este método también puede usarse para diseñar DRA usando permitividades bajas. Esto es importante en el diseño de DRA porque la alimentación perturba el sistema y produce un cambio en las resonancias de los modos característicos. Por lo tanto, al considerar la alimentación en el análisis de modos característicos se obtienen resultados más realistas comparándolos con los obtenidos mediante un análisis convencional. Así, diseñando con el "Substructure Characteristic Mode method" se pueden extraer nuevas conclusiones sobre el diseño de DRA mediante la Teoría de Modos Característicos. / En l'última dècada, la teoria dels modes característics està sent utilitzada per molts grups d'investigació en tot el món. Este tema i el seu ús en diferents dissenys d'antenes metàl·liques està creixent molt ràpid. No obstant això, la majoria de les aplicacions s'han concentrat únicament en superfícies conductores sense cap coneixement físic sobre les seues limitacions i la seua interpretació física. Pel que fa a cossos dielèctrics, no hi ha hagut tants articles publicats com en metalls. La raó és que hi ha diferents formulacions integro- diferencials i la interpretació de les seues solucions no és tan òbvia com en cossos conductors. En esta tesi es presenta una interpretació teòrica considerant cossos conductors i dielèctrics sense pèrdues. Les conclusions d'esta tesi ens permetran comprendre millor les solucions de la Teoria de Modes Característics i les seues limitacions. Açò és important en enginyeria d'antenes. Açò és important en enginyeria d'antenes. A més, esta anàlisi permetrà desenrotllar un nou mètode per al disseny d'antenes basades en ressonadors dielèctrics, DRA. Este mètode està basat en la formulació PMCHWT i la funció de Green multicapa utilitzada en el mètode dels moments (MoM) . A este nou mètode se li ha denominat "Substructure Characteristic Mode method", i està basat en la implementació dels complements Schur sobre les submatrius de l'operador del MoM. Este estudi permet optimitzar l'amplada de banda de radiació d'un DRA en el mateix procés d'anàlisi tant per al dielèctric com per a l'alimentació, com per exemple una ranura. A més, este mètode permet comprendre com es comporta la ranura en presència del ressonador dielèctric i viceversa. Este mètode també pot usar-se per a dissenyar DRA usant baixes permitivitats. Açò és important en el disseny de DRA perquè l'alimentació pertorba el sistema i produïx un canvi en les ressonàncies dels modes característics. Per tant, al considerar l'alimentació en l'anàlisi de modes característics s'obtenen resultats més realistes comparant-los amb els obtinguts per mitjà d'una anàlisi convencional. Així, dissenyant amb el "Substructure Characteristic Mode method" es poden extraure noves conclusions sobre el disseny de DRA per mitjà de la Teoria de Modes Característics. / Bernabeu Jiménez, T. (2017). Contribution to the physical interpretation of characteristic mode resonances. Application to dielectric resonator antennas [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/86177 / TESIS

This master's thesis presents the design and the realization of a low noise amplifier (LNA) for the S band of radio frequency spectrum from 2.3 GHz to 2.4 GHz. This thesis is mainly focused on stability and impedance matching networks study. Ansoft Designer and ANSYS HFSS programs are used for this design to simulate the LNA. Different low noise devices are simulated in order to find the best results for the final design. Moreover, a coaxial cavity resonator is designed in the input of the LNA and works as a band pass filter. Finally, the LNA is fabricated and its properties compared with the simulation results.