Changing environmental conditions often impose stressful growing conditions in plant communities. Until now, morphological plasticity, i.e. polymorphic growth physiognomies of plants, has not been sufficiently studied as a pivotal strategy for the whole ecosystem adaptation to environmental stress. We consider mangrove ecosystems as suitable models to provide insights on this subject. In the thesis, I investigate the ecological significance of tree morphological plasticity in the structural development and the dynamics of mangrove forests. I conducted field experiments in two regions located on both sides of the Amazon River mouths i.e. in French Guiana and North Brazil. Forest inventories were carried out in contrasting mangrove stands in both regions. The thesis combines empirical analysis of field data, terrestrial laser scanning (TLS), and mechanistic, individual-based computer simulations. We published results that proved the TLS-based analysis of individual tree structure useful for a better knowledge on biomass allocation between trunk and branches in tall and large Avicennia germinans mangrove trees reaching 45 m high and 125 cm of trunk diameter. Combining structural descriptions of A. germinans trees found in both sites, I highlighted the site-specific differences in tree allometries. The study suggests that regional differences in mangrove tree structure and function could be captured through better description of crown metrics, and that selected indicators of local morphological plasticity and consequent stand structure could generate a plus-value in the understanding of mangrove stand dynamics across contrasting coastal environments. Beyond the extension of allometric models to large Avicennia trees, we proposed new biomass equations with improved predictive power when crown metrics is taken into account. Additionally, we developed a novel software tool, named Lollymangrove, based on the AMAPStudio suite of software, with the objective of maximizing the potential of further field descriptions and modeling works. Lollymangrove allows standardized forest data capture, 3D visualization of structural data, aboveground biomass computations from a configurable module and export formats for forest dynamics and remote sensing models. Simulation experiments were conducted by means of the spatially explicit, individual-based stand model BETTINA_IBM. This model describes the important mechanism of water uptake limited by salt stress, and revealed insights into the relation between environmental conditions, allometric variations and biomass partitioning of mangrove trees, and stand characteristics. The simulation results suggest close matches with observed ecological patterns (e.g., tree allometries, mortality distributions, and self-thinning trajectories) under higher salinity. In low salinity conditions, however, the current parameterization underestimates the maximum tree height and diameter, and consequently, aboveground biomass and self-thinning trajectories of forest stands. This suggests that the morphology of trees under low levels of salinity are explained by further regulation mechanism(s) that still need to be addressed in a subsequent model improvement. Overall, this work has essentially pointed out the need to elucidate how morphological plasticity relates with structural development of forest stands. It establishes that TLS measurements and structural data analysis associated to efforts for integrative software and mechanistic modelling works could link mangrove dynamics to fast-changing coastal processes.

The global effort to rehabilitate and restore destroyed mangrove forests is unable to keep up with the high mangrove deforestation rates which exceed the average pace of global deforestation by three to five times. Our knowledge of the underlying processes of mangrove forest regeneration is too limited in order to find suitable techniques for the restoration of degraded mangrove areas. The general objective of my dissertation was to improve mangrove restoration by understanding regeneration processes and local plant-plant interaction in a regenerating Avicennia germinans forest. The study was conducted in a high-shore mangrove forest area on the Ajuruteua peninsula, State of Para, Northern Brazil. The dwarf forest consisting of shrub-like trees is recovering from a stand-replacing event caused by a road construction in 1974 which interrupted the tidal inundation of the study area. Consequently, infrequent inundation and high porewater salinity limit tree growth and canopy closure. All trees and seedlings were stem-mapped in six 20 m x 20 m plots which were located along a tree density gradient. Moreover, height, crown extent, basal stem diameter of trees were measured. The area of herbaceous ground vegetation and wood debris were mapped as well. The mapped spatial distribution of trees, seedlings and covariates was studied using point pattern analysis and point process models, such as Gibbs and Thomas point process, in order to infer underlying ecological processes, such as seed dispersal, seedling establishment, tree recruitment and tree interaction. In the first study (chapter 2), I analyzed the influence of abiotic and biotic factors on the seedling establishment and tree recruitment of A. germinans during the recolonization of severely degraded mangrove sites using point process modeling. Most seedlings established adjacent to adult trees especially under their crown cover. Moreover, seedling density was higher within patches of the herbaceous salt-marsh plants Blutaparon portulacoides and Sesuvium portulacastrum than in uncovered areas. The higher density of recruited A. germinans trees in herb patches indicated that ground vegetation did not negatively influence tree development of A. germinans. In addition, tree recruitment occurred in clusters. Coarse wood debris had no apparent effect on either life stage. These results confirm that salt-marsh vegetation acts as the starting point for mangrove recolonization and indicate that the positive interaction among trees accelerates forest regeneration. In the second study (chapter 3), I analyzed how intraspecific interaction among A. germinans trees determines their growth and size under harsh environmental conditions. Interaction among a higher number of neighboring trees was positively related to the development of a focal tree. However, tree height, internode length and basal stem diameter were only positively associated in low-density forest stands (1.2 trees m-2) and not in forest stands of higher tree density (2.7 trees m-2). These results indicated a shift from facilitation, i.e. a positive effect of tree interaction, towards a balance between facilitation and competition. In the third study (chapter 4), I used point process modeling and the individual-based model mesoFON to disentangle the impact of regeneration and interaction processes on the spatial distribution of seedlings and trees. In this infrequently inundated area, propagules of A. germinans are only dispersed at a maximum distance of 3 m from their parent tree. Furthermore, there is no evidence that the following seedling establishment is influenced by trees. I was able to differentiate positive and negative tree interactions simulated by the mangrove model mesoFON regardless of dispersal processes based on static tree size information using the mark-correlation function. The results of this dissertation suggest that mangrove forest regeneration in degraded areas is a result of facilitative and not competitive interactions among mangrove trees, seedling and herbaceous vegetation. This has important implications for the restoration of degraded mangrove forest. Degraded mangrove areas are usually restored by planting a high number of evenly spaced seedlings. However, high costs constrain this approach to small areas. Assisting natural regeneration could be a less costly alternative. Herbaceous vegetation plays a crucial role in forest recolonization by entrapping propagules and possibly ameliorating harsh environmental conditions. So far only competition among mangrove trees has been considered during restoration. However, facilitative tree interactions could be utilized by planting seedling clusters in order to assist natural regeneration instead of planting seedlings evenly-spaced over large areas. This dissertation also showed that point pattern analysis and point process modeling can enable forest ecologists to describe the spatial distribution of trees as well as to infer underlying ecological processes.

Despite their important ecosystem benefits for terrestrial and marine flora and fauna and the human livelihood mangrove forests suffer a high loss rate mainly due to human activity. Aside from these impacts, natural forest disturbances exist more commonly in mangroves compared to other forests as a direct consequence of their exposed coastal location. Within this thesis I investigate the influence of natural disturbance regimes on the mangrove forest dynamics focusing in particular on the ecological role of disturbances, disturbance patterns, forest structure, succession behavior and long-term vulnerability evaluation. The study areas were set in the Indian River Lagoon in Florida (USA) and in Can Gio an UNESCO Biosphere Reserve (Vietnam). In addition, theoretical simulation studies were carried out to complement the field studies. Thereby, in our study at the Indian River Lagoon site I investigated the ecosystem response to hurricane events of an artificially impounded mangrove forest. In Can Gio, the suitability of lightning strike – caused gaps for setting a homogenous plantation into more natural-like state according to species composition and forest structure was analyzed. Finally, a theoretical simulation study was carried out to compare lightning strike and hurricane events regarding their homogenization and heterogenization effects on the spatio-temporal forest structure. The findings of the field study in the Indian River Lagoon indicate that hurricane events had a severe impact on forest areas in higher successional stages by creating open patches, whereas areas in lower successional stages remained largely undisturbed. Furthermore, the impoundment determines the species selection of the post-hurricane succession by favoring flooding-tolerant species. However, regeneration was found to be impaired by the artificially high inundation regime at some disturbed patches. The lightning-strike disturbances enhance the species composition in the monospecific plantation in Can Gio by providing a sufficient light regime for entering seeds to establish. In addition, lightning-strike gaps increased the plantation structure complexity. Regenerating lightning-strike gaps remained as “green islands” within windthrow sites in the plantation due to their low stature and provided seeds for surrounding disturbed areas thereby accelerating their recolonization. The results of the simulation analysis of a theoretical landscape showed that in the simulated highly complex natural mature forests all disturbance regimes entail homogenization on the spatial structure compared to an undisturbed scenario. The hurricane scenario showed an increased temporal variation of the forest dynamics whereas lightning-strike gaps were not able to contribute to additional heterogeneity in the simulated area, despite of having the same tree mortality probability during disturbances. The interaction of the large-scale impoundment in the Indian River Lagoon and medium-sized hurricane events is characterized by partially impeded post-hurricane regeneration. In contrast, small-scaled lightning strikes influenced the regeneration of medium-sized windthrow sites positively within the homogenous plantation. We therefore suggest management activities aimed at creating small clearances within the plantation in Can Gio to simulate additional small-scale disturbances in order to facilitate heterogenization of the plantation structure. Natural disturbances are found to be able to enhance the species diversity and the interactions of ecological processes. In particular, where sustainable management strategies focused on maintaining ecosystem services especially in restored sites or plantations act as a supportive part. Natural disturbances are an integral component of mangrove forests and fulfill specific ecological functions. However, our findings indicate that these disturbances, on top of altered environmental conditions associated with climate change and direct human impacts, might jeopardize the natural development in unnatural forest structures as on plantations or restored sites. This thesis gives an extensive overview about the effect of various disturbances in different mangrove forest systems, including semi-natural forests and strongly modified plantations, on species composition and forest structure. Field studies and simulation analyses contribute in equal parts to the results of the thesis.

’African Bamboo PLC’ has the vision to become the first and the leading bamboo-based floorboard producer in Africa with export markets in Europe and America. African alpine bamboo (Yushania alpina), common in the highlands of Ethiopia, was used to develop woven strand board (WSB) products. Research on thermal modification was part of the product development. Samples were mainly collected in Tetechia (6°33‘ 34‘‘ N 38°32‘25‘‘ W, 2,650-2,700 m a.s.l.), located in the Sidama region. Three culms each of two, three, four and five years of age were harvested. Samples were taken from the middle of each internode to determine the moisture content and density. Samples used to assess the effects of thermal modification were cut next to them. Further test specimens from different areas and other species such as the lowland bamboo (Oxytenanthera abyssinica) were also investigated. The thermal treatment was applied in a kiln with steam as an inert blanket to reduce oxidative processes. Eight modifications were performed at temperatures of 160 °C, 180 °C, 200 °C and 220 °C, at durations of three or five hours each. Mass loss, sorption behaviour, impact resistance, resistance to indentation and contents of chemical components were analysed for the modified and unmodified samples. Yushania alpina is a thin-walled bamboo with a maximum diameter of 6 cm, moisture content of up to 150 % and densities of between 0.5 g/cm² and 0.8 g/cm². Moisture content, diameter and wall thickness decreased from the bottom to the top of the culms, whereas density increased. Two year old bamboo had the lowest and three year the highest density. The mass loss followed an exponential trend, with about 2 % loss at 160 °C and 16 % at 220 °C. This mainly reflected the degradation of hemicellulose, which was fully removed at 220 °C. Extractive contents, at less than 5 %, fluctuated. Lignin amounted to 30 % and increased appreciably. Cellulose reached contents of about 45 % and decreased slightly at high temperatures. The chemical change, which was based more on the temperature than on the duration of treatment, influenced the sorption behaviour and mechanical properties most of all. The equilibrium moisture content was reduced by between 10 % to 40 %, depending on the climate and modification temperature chosen. This reduction stabilised between temperatures of 200 °C and 220 °C. The impact resistance of untreated bamboo was 3.8 J/cm², compared to only 1.4 J/cm² for modified samples. Resistance also differed between samples from the outer and inner part of the culm in the transverse section. The resistance to indentation declined also. Unmodified samples had 47 N/mm², compared to only 20 N/mm² for strongly modified samples. The results of the analysis and the experience gained indicate that temperatures between 180 °C and 200 °C, held for three hours, lead to the best results for woven strand board production using Ethiopian highland bamboo. / ’African Bamboo PLC’ setzt sich zum Ziel, als erstes Unternehmen Holzwerkstoffe aus Bambus nach Europa und Amerika zu exportieren. Afrikanischer Hochgebirgsbambus (Yushania alpina), welcher vor allem im Hochland von Äthiopien vorkommt, wurde dazu verwendet ”woven strand boards” (WSB) zu entwickeln. Untersuchungen zur thermischen Modifizierung waren dabei Bestandteil der Produktentwicklung. Die dafür notwendigen Bambusproben wurden hauptsächlich in Tetechia (6°33‘34‘‘ N 38°32‘25‘‘ W, 2650-2700 m ü. NN), einem Dorf in Sidama, entnommen. Es wurden dazu je drei Bambushalme der Altersklassen zwei, drei, vier und fünf Jahre geerntet. Proben für die Bestimmung von Holzfeuchte und Dichte wurden in der Mitte jedes Internodiums entnommen. Diese spielten als Referenzprobe eine große Rolle. Neben den Referenzprobekörpern wurden die jeweiligen Stücke für die thermische Behandlung heraus gesägt, wobei dies nach einer bestimmten Systematik erfolgte. Neben den Proben aus Tetechia wurden für die Untersuchungen zudem Proben aus anderen Gebieten und von einer anderen Art, dem Tieflandbambus (Oxytenanthera abyssinica), hinzugefügt. Die thermische Modifizierung erfolgte unter Wasserdampf, welcher oxidative Prozesse verhinderte. Insgesamt erfolgten acht Modifizierungen bei Temperaturen von 160 °C, 180 °C, 200 °C und 220 °C und einer jeweiligen Haltezeit von drei oder fünf Stunden. In Anbetracht der unbehandelten und behandelten Proben wurden der Masseverlust, die Bruchschlagarbeit, der Eindruckswiderstand und die chemische Zusammensetzung analysiert. Yushania alpina ist ein dünnwandiger Bambus mit Durchmessern bis zu 6 cm, Holzfeuchten bis 150 % und Dichten zwischen 0,5 g/cm² und 0,8 g/cm². Holzfeuchte, Durchmesser und Wandstärke verringerten sich mit der Halmhöhe, wobei die Dichte hingegen anstieg. Zweijähriger Bambus hatte die geringsten und dreijähriger Bambus die höchsten Dichten. Der Masseverlust folgte einem expontiellem Verlauf mit Werten von 2 % bei 160 °C und 16 % bei 220 °C. Er widerspiegelte den Abbau der Hemicellulose, welche bei 220 °C schon nicht mehr vorhanden war. Exktraktgehalte fluktuierten mit Werten unter 5 %. Der Ligningehalt lag bei ungefähr 30 % und stieg merklich an. Der Cellulosegehalt erreichte Werte von etwa 45 %, wobei die Cellulose bei höheren Temperaturen leicht abgebaut wurde. Die chemischen Veränderungen, welche maßgeblich von der angewandten Temperatur statt der Behandlungsdauer beeinflusst wurden, wirkten sich auf das Sorptionsverhalten und mechanische Eigenschaften aus. Je nach ausgesetztem Klima und erfolgter Modifikation wurde die Ausgleichsfeuchte der Proben um 10 % bis 40 % reduziert. Die Abnahme der Ausgleichsfeuchte stabilisierte sich im Temperaturbereich von 200 °C bis 220 °C. Die Bruchschlagarbeit des unbehandelten Bambus betrug 3,8 J/cm², die des behandelten nur 1,4 J/cm². Die Bruchschlagarbeit variierte unabhängig von der Modifikation zwischen dem inneren und äußeren Abschnittes innerhalb des Halmquerschnitts. Der Eindruckswiderstand nahm mit der thermischen Behandlung ebenfalls ab. Unbehandelte Proben hatten 47 N/mm², während die modifizierten Proben nur noch 20 N/mm² aufwiesen. Anhand der Ergebnisse und erworbenen Erfahrungen lies sich schlussfolgern, dass Temperaturen zwischen 180 °C und 200 °C bei einer Haltezeit von drei Stunden für die thermische Modifizierung von Äthiopischem Hochlandbambus in Bezug auf die Entwicklung von ”woven strand boards” empfehlenswert waren.