The foodservice industry is dependent on millions of employees daily to ensure proper and safe food handling of food products consumed by the general public. The State of Texas requires food establishments’ management or person in charge be trained in food protection. For this inquiry, the researcher studied the knowledge level gained by food mangers from two food companies and two certification courses. There were 90 food service operations that participated in the study. The data was collected through the use of a food safety knowledge test instrument. The scope of the study was to explore the level of food safety knowledge of two self-selected certified food managers in Texas. Sixty-five percent (65.6%) of the certified food managers were certified by course A and 34.4% were certified by course B. The researcher explored two educational theories that are often utilized in the agricultural education discipline. Adult education and training programs in agriculture should use appropriate and effective instructional methods. Creswell and Martin (1993) inferred a linkage between adult education and instructional design as it related to agriculture. This study explored the phenomenon regarding certified food manager training courses and knowledge level through certification. In agricultural education, lives are affected through education and training. Trede and Wade (1993) suggested that agricultural education helps people improve their lives through an educational process using scientific knowledge. The participants’ knowledge test scores were as follows: course A (n=59) 72.9% and course B (n=31) 69.0%. The resulting t-test was determined to the knowledge test score of course A and course B, and proved not to be statistically significant at an alpha level .05. Thus, the researcher concluded instructional design and adult learning theory did not have an impact on the knowledge level of participants as a result of the two self-selected courses for certified food manager training in this study. Food safety knowledge of participants who spoke English or Korean as their native languages were analyzed closely as they represented the largest population of the participants. Korean as a native language represented the largest group at 45.6% of the population. English as a native language represented the second largest group at 43.3% of the population. Certified Food Manager Training is offered in these languages throughout Texas. Differences were found within the participants’ native or first languages. The certified food managers who identified as English and Korean native or first language resulted a statistically significant comparison when analyzed via independent t-test. The researcher recommends further research on affects of native language on certified food manager training. This research study discusses potential improvements that may be implemented in future research for certified food management training. The scope of this study utilized two self selected courses that were available to the participating certified food managers. For example, the Food Safety Knowledge Test instrument which was developed specifically for the scope of this research. Although this instrument was only used once it served as a suitable tool for this research project and could serve as a guide for the development of future research instruments. The researcher suggests that future researchers consider utilizing a tested and established research instrument. A study with a broader scope including courses supported by other National and State level accreditation organization as well as increasing the number of participant; may yield additional findings.

ABSTRACT Objectives: To develop and validate in an Australian setting, an instrument to effectively measure patient safety culture; to survey health care workers (HCWs) in a large public healthcare system to establish baseline patient safety culture; and, using the Theory of Planned Behaviour (TPB), to use behavioural modelling to identify the factors that predict and influence Patient Safety Behavioural Intent (PSBI) Eg. Reporting clinical incidents and speaking up when a colleague makes an error. Design: Cross sectional survey analysed with multiple logistic regression (MLR). Setting: Metropolitan, regional and rural public hospitals in Queensland, Australia. Participants: 5294 clinical and managerial staff. Main outcome measures: 1) Behavioural models for high-level Patient Safety Behavioural Intent (PSBI) for senior and junior doctors, senior and junior nurses, and allied health professionals. 2) Odds ratios to compare levels of PSBI between professional groups. Results: 1) The factors that influence high-level PSBI for each professional group give rise to unique predictive models. Two factors stand out as influencing high-level PSBI for all HCWs (R2 0.21). These are: i) Preventive Action Beliefs (Adjusted Odds Ratio (AOR) 2.38) (HCWs??? belief that engaging in the target behaviour(s) will lead to improved patient safety) and ii) Professional Peer Behaviour (AOR 1.79) (HCWs??? perceptions of the safety behaviour(s) of one???s professional peers). 2) There was a six-fold difference in the level of target behaviour (PSBI) across the clinical groups with few (29.6%) junior doctors having a high-level of PSBI. When compared with the junior doctors, the senior doctors were nearly 1.5 times more likely (Odds Ratio (OR) 1.46, 95% Confidence Interval (CI) 1.01-2.13), allied health staff 2.7 times more likely (OR 2.71, 95%CI 1.91-3.73), junior nurses 3.9 times more likely (OR 3.86, 95%CI 2.83-5.26), and senior nurses 6.0 times more likely (OR 6.01, 95%CI 4.78-9.16) to have high-level PSBI. Conclusions: This is the first published study to develop behavioural models of factors that influence HCWs??? intention to engage in behaviours known to be associated with improved patient safety. The findings of this study will greatly assist in the future design and implementation of targeted and cost-effective patient safety improvement initiatives.

abstract: Over the years, aviation safety has been influenced by continuous implementations of both proactive and reactive policies by both regulatory boards and also, aviation service providers. This achievement has been possible mainly because of the safety management tools like the Aviation Safety Action Program (ASAP) which derives its roots from the much earlier Aviation Safety Reporting System (ASRS). Federal Aviation Administration (FAA) provides guidelines and procedures for installation and development of an ASAP, for every airline in the United States. In this study, how different United States air carriers apply ASAP in their organizations is investigated. / Dissertation/Thesis / Masters Thesis Technology 2016

Made available in DSpace on 2014-10-09T12:24:26Z (GMT). No. of bitstreams: 0 / Made available in DSpace on 2014-10-09T14:04:22Z (GMT). No. of bitstreams: 1 00825.pdf: 1184404 bytes, checksum: 52cea6a9c8c074448abe0c78136a12d5 (MD5) / Dissertacao (Mestrado) / IEA/D / Escola Politecnica, Universidade de Sao Paulo - POLI/USP

Car accidents happens daily, and it is very important to protect all involved in a carno matter the age. Persons that are old enough and can take care of themselves, usescar seat belts to be protected in traffic. A child, however, must be placed andfastened in a safety seat by a parent or another caregiver, to be fully protected. Children that are correctly secured in safety seats have a 2.7 times bigger chance tosurvive a car crash without serious injuries compared to unstrained children (Berget al., 2000; WHO,2004). Regardless tests and safety seats that are available ontoday’s market, there are still issues that needs to be eliminated. Daily users of thisproduct are a good starting point since these people want a safe seat for their childthat can be easy to install and affordable; and they can best tell what issues theyencounter. Based on several scientific articles in a combination with interviews andobservations, issues with the safety seats could be confirmed. The primary issue isthe seat belt that is attached to the safety seat. Children can develop a habit ofwriggling out of the belt in safety seats. There are belt collectors available on themarket which holds the shoulder belts in place. In this way, it is harder for thechildren to slide out of the belt and helps to keep the belt properly positioned(BeSafe, 2018). Instead of having this as an accessory, it has been considered in thebelt that have been developed. Another issue is that the belt is complicated tofastened since two straps has to be simultaneously clicked in the belt buckle. If thisis done incorrectly, the belt cannot be fastened, and it takes time to try it again. Tomake this easier, two straps and the strap between the child's leg will be fastenedseparately in a seat buckle each. In this way, parents and other caregivers will beable to fasten the belt easy and properly. They will also be sure that the child issafely fastened and will minimize injury during an accident or another situation.

Made available in DSpace on 2014-10-09T12:24:26Z (GMT). No. of bitstreams: 0 / Made available in DSpace on 2014-10-09T14:04:22Z (GMT). No. of bitstreams: 1 00825.pdf: 1184404 bytes, checksum: 52cea6a9c8c074448abe0c78136a12d5 (MD5) / Dissertacao (Mestrado) / IEA/D / Escola Politecnica, Universidade de Sao Paulo - POLI/USP

Magister Commercii - MCom / Occupational Health and Safety is largely determined by the creation of a Safety Culture that minimises risk. In South Africa the construction sector is the second most hazardous industry after mining. This study focuses on two exemplary construction firms in the Western Cape. The main research question is "How do the companies ensure coherent safety management practices that create a safety culture?" Based on a modification of a Balanced Health and Safety Scorecard for the Construction sector five sub-questions address safety management practices from a Management Perspective, an Operational Perspective, a Learning Perspective and a Client and Compliance Perspective. Data has been gathered from company documents, semistructured interviews, together with on-site observation. In conclusion the study reveals that management commitment, active communication and employee acknowledgement contribute positively to creating an effective safety culture on-site. Further studies are recommended with a specific view on small and medium companies in the construction sector.

Lifting and overstraining are major causative factors related to musculoskeletal injuries and low back pain. A great number of work-related injuries arise from the handling and/or mishandling of materials. Hence there is a need to quantify risk factors in situ and develop guidelines for safe lifting practises in industry. The aim of this study was to make appropriate in situ quantification, within a commercial warehouse, of the stresses and physical demands imposed on the worker when performing two handed lifts in the sagittal plane. The performance of employees was assessed under normal working conditions through an observational methodology of data collection. Task performance evaluation was based on detailed measurement of all containers handled, an activity and time analysis, and the 'Work Practices Guide to Manual Lifting’ (NIOSH, 1981) which was used as the primary guide to developing theoretical recommendations to probable MMH risk factors for the workers involved. Of the 191 tasks analysed 103 were deemed unsuitable. Appropriate task factor adjustments were made where necessary to both the frequency and Hfactors (horizontal distance between the centre of gravity of the container and that of the worker) in order to reduce the risk factor for the workers

Denna kandidatuppsats syftade till att mäta säkerhetsklimatet bland ledarna i en organisation verkandes inom elbranschen och jämföra detta med branschgenomsnittet samt andra branscher. Vidare undersöktes säkerhetsklimatet i relation till safety performance inom organisationen. Studien syftade även till att finna samband och skillnader relaterade till upplevelsen av klimatet som baseras på faktorer såsom individens erfarenheter och sociala omgivning. Dessa faktorer låg till grund för kategorierna ålder, år i organisationen och yrkesbefattning. Frågeställningar uppsatsen ämnade att besvara var: Skiljer sig denna organisations resultat jämfört med andra branscher? Hur ser sambanden ut mellan ledarnas säkerhetsklimat och safety performance? Finns det samband mellan social omgivningen såsom yrkesbefattning, ålder och antal år i organisationen som påverkar säkerhetsklimatet? För att mäta säkerhetsklimatet användes frågeformuläret nordic safety climate questionnaire (NOSACQ-50). Resultatet visade att organisationens säkerhetsklimat var högt jämfört med andra branscher men likväl fanns ändå rum till förbättring. Vidare visade resultatet att det var möjligt att observera samband mellan det goda säkerhetsklimatet och ökningen av riskobservationer/tillbud. Resultatet påvisade samband mellan lågt antal olyckor och högt upplevt säkerhetsklimat. Den sociala omgivningen kopplat till yrkesbefattningar tenderar att påverka uppfattningen av säkerhetsklimatet. Detta då chef/projektledare och ledande montörer svarar höga värden beroende på om frågorna rör ledning eller medarbetare. Analyserna visade på samband mellan upplevt säkerhetsklimat och erfarenheter, äldre individer skattade säkerhetsklimatet högre samt att de med fem år eller mindre hos organisationen skattade högre. Detta resultat skulle kunna ha influerats av organisationens ökade fokus i nutid gällande säkerhetsarbetet. Slutligen var det 60 respondenter med ledande positioner som deltog i denna studie.

A system is safety-critical if its malfunctioning could have catastrophic consequences for people, property or the environment, e.g., the failure in a car's braking system could be potentially tragic. To produce such type of systems, special procedures, and strategies, that permit their safer deployment into society, should be used. Therefore, manufacturers of safety-critical systems comply with domain-specific safety standards, which embody the public consensus of acceptably safe. Safety standards also contain a repository of expert knowledge and best practices that can, to some extent, facilitate the safety-critical system’s engineering. In some domains, the applicable safety standards establish the accepted procedures that regulate the development processes. For claiming compliance with such standards, companies should adapt their practices and provide convincing justifications regarding the processes used to produce their systems, from the initial steps of the production. In particular, the planning of the development process, in accordance with the prescribed process-related requirements specified in the standard, is an essential piece of evidence for compliance assessment. However, providing such evidence can be time-consuming and prone-to-error since it requires that process engineers check the fulfillment of hundreds of requirements based on their processes specifications. With access to suitable tool-supported methodologies, process engineers would be able to perform their job efficiently and accurately. Safety standards prescribe requirements in natural language by using notions that are subtly similar to the concepts used to describe laws. In particular, requirements in the standards introduce conditions that are obligatory for claiming compliance. Requirements also define tailoring rules, which are actions that permit to comply with the standard in an alternative way. Unfortunately, current approaches for software verification are not furnished with these notions, which could make their use in compliance checking difficult. However, existing tool-supported methodologies designed in the legal compliance context, which are also proved in the business domain, could be exploited for defining an adequate automated compliance checking approach that suits the conditions required in the safety-critical context. The goal of this Licentiate thesis is to propose a novel approach that combines: 1) process modeling capabilities for representing systems and software process specifications, 2) normative representation capabilities for interpreting the requirements of the safety standards in an adequate machine-readable form, and 3) compliance checking capabilities to provide the analysis required to conclude whether the model of a process corresponds to the model with the compliant states proposed by the standard's requirements. Our approach contributes to facilitating compliance checking by providing automatic reasoning from the requirements prescribed by the standards, and the description of the process they regulate. It also contributes to cross-fertilize two communities that were previously isolated, namely safety-critical and legal compliance contexts. Besides, we propose an approach for mastering the interplay between highly-related standards. This approach includes the reuse capabilities provided by SoPLE (Safety-oriented Process Line Engineering), which is a methodological approach aiming at systematizing the reuse of process-related information in the context of safety-critical systems. With the addition of SoPLE, we aim at planting the seeds for the future provision of systematic reuse of compliance proofs. Hitherto, our proposed methodology has been evaluated with academic examples that show the potential benefits of its use. / AMASS