We report the self assembly of nanostructures via. the bottom-up approach by dielectrophoresis. Dielectrophoresis deals with the force on an electric dipole placed in an external in-homogenous field. The force depends on the geometry and volume of the dielectric material and on the frequency and gradient of the electric field. We report the self-assembly of metallic palladium nanowires from the aqueous solution by dielectrophoresis. The metal cations with the surrounding hydration shell and counter-ion cloud results in the formation of a dipole which responds to the local dielectrophoretic forces. Structural properties and morphology of the palladium nanowires are listed. Depending on the experimental conditions two different types of nanowires were grown. Some of them were extremely thin (5 nm diameter) and branched while the others were thick (25 nm diameter) and dendritic. The wire formation can be divided into the nucleation and growth process. For the particle assembly, a minimum threshold force is needed to overcome the random Brownian motion. The nucleation depends on the asperities on the electrode surface and the growth depends on the tip of the growing wires where exists extremely high field magnitude and in-homogeneties and so the force overcomes the threshold at these locations. We showed that wire growth depends a lot on the formation of the double layer at the electrode/solution interface and potential drop within the double layer. Carbon nanotubes (CNT) were also deposited between the electrodes leading to the formation of field-effect transistors (FETs). We produced CNTFETs having extremely high on/off ratio, in a single step without the requirement of any intermediate burning process of the metallic tubes. Besides these inorganic systems, we also investigated the dielectrophoretic experimental conditions required for self assembly of bio-molecules like microtubules between the electrodes. Hybrid structures were also formed by mixing these materials in combination of two. In conclusion, we report in this work the possibility to assemble a large variety of particles (ions, neutral particles and bio-molecules) between the electrodes leading to the device formation. The thesis was mainly devoted to the task for the synthesis and assembly of the nanostructures via. the bottom-up approach.

In dieser Arbeit wurde untersucht, wie gut bestimmte aliphatische Verbindungen, die selbstorganisierende Monolagen bilden, als Dielektrikum für organische Transistoren geeignet sind. Die auf Silicium- und Aluminiumoberflächen adsorbierten Verbindungen wurden mittels Ellipsometrie, AFM, STM und XPS charakterisiert, und die Packungsdichte, Ordnung und Oberflächenbelegung der Monolagen ermittelt. Zwischen den experimentellen Ergebnissen und denen von Computersimulationen der räumlichen Anordnung der Moleküle ergab sich eine gute Übereinstimmung. Alle untersuchten Monolagen zeigen keine Fernordnung. Der Grad der Nahordnung hängt von der Wahl der Anker- und Endgruppe ab. Die größte Packungsdichte wurde für die Verbindungen mit Phosphonsäure-Ankergruppe und Methyl-Endgruppe festgestellt. Für Monolagen der Verbindung n-Octadecylphosphonsäure auf Aluminium wurde ein Molekülabstand von 0.35 nm ermittelt. Mit dieser Verbindung als Gate-Dielektrikum wurden funktionsfähige organische Transistoren und integrierte Schaltungen demonstriert.

Im Fokus dieser Dissertation stehen anorganisch-organische Hybridaggregate aus Kadmiumselenid-Nanokristallen und funktionalisierten Porphyrinmolekülen in Lösung. Mit Hilfe von statischen und zeitaufgelösten Methoden der optischen Spektroskopie wird nachgewiesen, daß die Bildung der Aggregate durch spontane Adsorption der funktionalisierten Moleküle an der Nanokristalloberfläche erfolgt. Dabei ist von einem dynamischen Gleichgewicht zwischen den Porphyrinmolekülen und den ursprünglichen Nanokristall-Liganden (TOPO) auszugehen. In der Photophysik der Hybridaggregate lassen sich ein resonanter Energietransfer nach Förster, der vom Nanokristall zum Porphyrinmolekül gerichtet ist, sowie eine Elektronen-Austauschwechselwirkung zwischen beiden Komponenten nach Dexter nachweisen. Mit Hilfe einer Erweiterung des Stern-Volmer-Ansatzes zur Beschreibung der Fluoreszenzlöschung für bimolekulare Reaktionen können die jeweiligen Anteile für eine Serie von Nanokristallen unterschiedlicher Größe und zweierlei Beschaffenheit grob quantifiziert werden. Ferner wird der Einfluß diffundierender Ladungen auf die Quantenausbeute von Halbleiternanokristallen anhand von zeitkorrelierter Einzelphotonenerfassung untersucht. Mit Hilfe einer Detektionsmethode, die die Zeitreihe der Ankunftszeiten einzelner Photonen erhält (tt-TCSPC), ist es möglich, den in eine Polymermatrix eingebetteten Halbleiternanokristallen charakteristische Fluktuationen der Fluoreszenzlebensdauer mit individueller Zeitkonstante zuzuordnen. / This Thesis is devoted to the formation and the photophysics of inorganic/organic hybride nanoaggregates designed from CdSe semiconductor nanocrystals and pyridyl-functionalized porphyrin molecules in solution at ambient conditions. The formation of the aggregates is revealed to be based on a spontaneous adsorption of the functionalized porphyrin molecules on the nanocrystal surfaces, with a dynamic equilibrium sustained due to the competition with TOPO, ie. the original surface ligand. The evidence for the existence of the self-assembled aggregates is furnished by the proof of a directed Förster resonant energy transfer from the nanocrystal to the porphyrin molecules at low compound concentrations. By means of steady-state and time-resolved optical spectroscopy, the resonant energy transfer (RET) is valued to be accompanied by at least one more secondary quenching mechanism. Motivated by the aptitude of the nanocrystals to host more than one molecule at once, the detection and quantification of this process is done by an extension of the conventional Stern-Volmer kinetics valid for bimolecular reactions. With that, the secondary interaction process aside from RET is explained in terms of a Dexter-type energy transfer that, on ist part, can be put down to a generation of charge-induced shallow trap states within the semiconductor nanocrystal. This model is in qualitative accordance with the known phenomena of fluorescence intermittency and spectral diffusion. The role of a fluctuating environment to affect the fluorescence quantum yield of the nanocrystals is confirmed by time-tagged time-correlated single-photon counting (tt-TCSPC) on single nanocrystals in a polymer matrix. The measurements show that the fluorescence lifetime of the nanocrystals is characterized by individual characteristic fluctuations possibly induced by temporal and spatial inhomogeneities in the distribution of the dielectric constants.

Increasing the integration density of electron device components will necessitate the use of new nanofabrication paradigms that complement and extend existing technologies. One potential approach to overcome the current limitations of electron-beam lithography may involve the use of hybrid systems, in which existing lithographic techniques are coupled with “bottom up” approaches such as supramolecular self-assembly. In this respect, biological systems offer some unique possibilities as they combine both self-organization and spatial patterning at the nanometer length scale. In particular, Surface Layer Proteins (S-layers) can facilitate high order organization and specific orientation of inorganic structures as they are two-dimensional porous crystalline membranes with regular structure at the nanometer scale. In this framework, the aim of the present work was the characterization of the S-layer of Sporosarcina ureae ATCC 13881 (SslA) with respect to its self-assembling properties and modification that would allow it to be employed as a patterning element and a new building block for nanobiotechnology. In vitro recrystallization experiments have shown that wild type SslA self-assembles into monolayers, multilayers or tubes. Factors such as initial monomer concentration, Ca2+ ions, pH of the recrystallization buffer and the presence of a silicon substrate have a strong influence on the recrystallization process. SslA monolayers proved to be an excellent biotemplate for ordered assembly of gold nanoparticle arrays. The recombinant SslA after expression and purification formed micrometer sized, crystalline monolayers exhibiting the same lattice structure as the wild type protein (p4 symmetry). This remarkable property of self-assembling has been preserved even when SslA was truncated. The deletion of both, N- and C-terminal SslA domains does not hinder self-assembly; the resulting protein is able to form extended monolayers that exhibit the p4 lattice symmetry. The central SslA-domain is self sufficient for the self-assembly. The possibility to change the natural properties of S-layers by genetic engineering techniques opens a new horizon for the tuning of their structural and functional features. The SslA-streptavidin fusion protein combines the remarkable property of self-assembling with the ligand i.e. biotin binding function. On silicon wafers, this chimeric protein recrystallized into coherent protein layers and exposes streptavidin, fact demonstrated by binding studies using biotinylated quantum dots. In this way, it can serve as a functional surface for controlled immobilization of biologically active molecules but also as a platform for the synthesis of planar arrays of quantum dots. Furthermore, the results open up exciting possibilities for construction of hybrid S-layers, structures that may ultimately promote the fabrication of miniaturized, nanosized electronic devices.

Frankfurt (Main), University, Diss., 2008.

Die neu ins Leben gerufene Schriftenreihe EINGEBETTETE, SELBSTORGANISIERENDE SYSTEME (ESS) widmet sich einer sehr aktuellen Thematik der Technischen Informatik. Seit Jahren durchdringen eingebettete Systeme unseren Alltag in fast allen Lebensbereichen. Angefangen von automatisierten Türöffnungssystemen, über komplex gesteuerte Servicemaschinen, z.B. Waschmaschinen, bis hin zu mobilen, persönlich zugeordneten Systemen wie Mobiltelefone und Handheld-Computer sind eingebettete Systeme zur Selbstverständlichkeit geworden. Der Aspekt der rekonfigurierbaren Schnittstellen zwischen einzelnen Komponenten eingebetteter Systeme wird in diesem ersten Band aufgegriffen. Der erste Beitrag befasst sich mit der systematischen Modellierung von Schnittstellen. Zunächst werden aktive Tasks und Kommunikationsmedien unterschieden sowie die Parameter der Zielarchitektur in den Entwurfsprozess für Schnittstellen eingebracht. Darauf aufbauend wird eine systematische Konzeption von Schnittstellen vorgestellt und bewertet. Der zweite Beitrag betrachtet das Problem der Rekonfigurierung von Schnittstellen zur Gewährleistung von sicherer Funktionalität, auch im Fehlerfall. Die Fehlererkennung und –behandlung werden von der erweiterten Schnittstelle implementiert. In dem dritten Beitrag untersucht Marcel Flade Schnittstellen in Hardware/Software-Systemen. Dabei stellt sich das Problem, die Kontrolle über die Funktionalität der Schnittstelle auf den Software- und Hardwareteil aufzuteilen. Die Beiträge werden durch eine vollständige Implementierung eines Beispiels und eines Werkzeugs zur automatisierten Generierung der VHDL-Implementierung abgerundet. Mit diesen ausgewählten Arbeiten, die in den ersten Band dieser wissenschaftlichen Schriftenreihe aufgenommen sind, werden dem Leser grundlegende Aspekte rekonfigurierbarer Schnittstellen für eingebettete, selbstorganisierende Systeme vorgestellt.

Self-assembly of polymeric building blocks is a powerful tool for the design of novel materials and structures that combine different properties and may respond to external stimuli. In the past decades, most studies were focused on the self-assembly of amphiphilic diblock copolymers in solution. The dissolution of these block copolymers in a solvent selective for one block results mostly in the formation of micelles. The micellar structure of diblock copolymers is inherently limited to a homogeneous core surrounded by a corona, which keeps the micelle in solution. Thus, for drug-delivery applications, such structures only offer a single domain (the hydrophobic inner core) for drug entrapment. Whereas multicompartment micelles composed of a water-soluble shell and a segregated hydrophobic core are novel, interesting morphologies for applications in a variety of fields including medicine, pharmacy and biotechnology. The separated incompatible compartments of the hydrophobic core could enable the selective entrapment and release of various hydrophobic drugs while the hydrophilic shell would permit the stabilization of these nanostructures in physiological media. However, so far, the preparation and control of stable multicompartment micellar systems are in the first stages and the number of morphological studies concerning such micelles is rather low. Thus considerably little is known about their exact inner structures. In the present study, we concentrate on four different approaches for the preparation of multicompartment micelles by self-assembly in aqueous media. A similarity of all approaches was that hydrocarbon and fluorocarbon blocks were selected for all employed copolymers since such segments tend to be strongly incompatible, and thus favor the segregation into distinct domains. Our studies have shown that the self-assembly of the utilized copolymers in aqueous solution leads in three cases to the formation of multicompartment micelles. As expected the shape and size of the micelles depend on the molecular architecture and to some extent also on the way of preparation. These novel structured colloids may serve as models as well as mimics for biological structures such as globular proteins, and may open interesting opportunities for nanotechnology applications. / Die Selbstorganisation von synthetischen amphiphilen Blockcopolymeren ist ein vielseitiger Prozeß, der die Entwicklung von neuartigen Materialien, die verschiedene Eigenschaften miteinander verbinden und auch auf äußere Reize reagieren können, ermöglicht. In den letzten Jahrzehnten haben sich viele Untersuchungen mit der Selbstorganisation von Diblockcopolymeren in Lösung beschäftigt. So bilden zum Beispiel amphiphile Diblock-Copolymere in Wasser meist Mizellen die einen hydrophoben Kern und eine hydrophile Hülle besitzen. Ihre potentielle Anwendung als Wirkstoffträger ist jedoch begrenzt, da für die Einlagerung nur ein hydrophober Bereich zur Verfügung steht. Multikompartment-Mizellen, bestehend aus einer wasserlöslichen Hülle und einem unterteilten hydrophoben Kern, sind dagegen neuartige und sehr interessante Strukturen für die Nanotechnologie und im speziellen für die Nanobiotechnologie, da sie sich zum Beispiel als Träger für Arznei- und Wirkstoffe eignen. So könnten in die separaten und untereinander nicht mischbaren Kompartimente im Kern der Mizelle verschiedene hydrophobe Wirkstoffe selektiv eingelagert und auch freigesetzt werden, wobei die hydrophile Hülle die Nanostrukturen im physiologischen Medium stabilisiert. Aus diesem Grund wurden in den letzten Jahren verschiedene Strategien für die Herstellung von Multikompartiment-Mizellen vorgeschlagen. Bis jetzt gibt es jedoch nur eine begrenzte Anzahl an Untersuchungen, die sich mit der Morphologie solcher Mizellen befassen und somit ist auch wenig über ihre innere Struktur bekannt. In der vorliegenden Arbeit konzentrieren wir uns auf vier verschiedene Ansätze zur Herstellung von Multikompartiment-Mizellen durch Selbstorganisation in wässriger Lösung. Eine Gemeinsamkeit bei allen Ansätzen ist, das die untersuchten Copolymere einen hydrophoben Kohlenwasserstoff-Block sowie einen Fluorkohlenstoff-Block besitzen. Die Kombination von Kohlenwasserstoff- und Fluorkohlenstoff-Blöcken wurden gewählt, weil solche Segmente in der Regel nicht miteinander kompatibel sind und somit die Aufteilung in separate Domänen begünstigen. Unsere Untersuchungen haben gezeigt, dass die Selbstorganisation der verwendeten Copolymere in wässriger Lösung in drei Fällen zu Multikompartiment-Mizellen führt. Die Form und Größe der Mizellen ist erwartungsgemäß von der Molekülarchitektur und zum Teil auch vom Präparationsweg abhängig. Diese neuartigen, nanostrukturierten Kolloide könnten als Modell und Mimetika für biologische Strukturen wie die von globulären Proteinen fungieren. Sie eröffnen weiterhin interessante Möglichkeiten für Anwendungen in der Nanotechnologie.

Within the field of modern technology, nanomatrials, such as nanoparticles (NP), nanorods (NR), quantum dots (QD) etc. are, probably, the most prominent and promising candidates for current and future technological applications. The interest in nanomaterials arise not only form the continuous tendency towards dimensions minimisation of electronic devices, but also due to the fact, that new and, often, unique properties are acquired by the matter at the length scale between 1 and 100 nm. The ability to organize nanoparticles into ordered arrays extends the range of useful NP-based systems that can be fabricated and the diversity of functionalities they can serve. However, in order to successfully exploit nanoparticle assemblies in technological applications and to ensure efficient scale-up, a high level of direction and control is required. Recently, block copolymers (BCP) have attracted much attention as a powerful and very promising tool for creation of nanoscale ordered structures owing to their self-assembling properties. In addition, these systems offer the possibility to fabricate nanostructured composite materials via incorporation of certain nanoadditives (i.e. NPs). The concept is that by selective inclusion of the nanoparticles into one of the blocks of a self-assembling copolymer, the nanoparticles are forced into a defined spatial arrangement determined by the phase morphology of the block copolymer. In present work self-assembling phenomena of block copolymers was exploited to fabricate binary (NP/BCP) and ternary (NP1/NP2/BCP) composites, filled with pre-synthesized nanoparticles of various nature. Polystyrene-block-polyvinylpyridine block copolymers (PS-b-PVP) of various composition and molecular weight were used for fabrication of nanocomposites. The first part of the thesis focuses on fabrication of functional BCP-based composites containing magnetic nanoparticles (MNP), selectively assembled within one of the blocks of BCP matrix. Magnetic nanoparticles (MNPs) were selected among others since, as for today, there is the least number of successful results reported in literature on their selective incorporation into one of the phases of a BCP matrix. From the application point of view fabrication of periodic arrays of “magnetic domains” with periodicity on nanometer scale is also of interest for potential use in high-density magnetic data storage devices. For this purpose, ferrite-type MNP (Fe3O4, CoFe2O4) having apparent affinity toward polyvinylpyridine (PVP) phase were prepared using simple one-pot synthesis. Highly selective nanoparticles segregation into PVP domains of BCP was achieved owing to the presence of sparse stabilizing organic shell on the nanoparticles surface. Importantly, as-prepared MNPs did not require any additional surface modification step to acquire affinity towards PVP phase. Appropriate selection of annealing conditions allowed to produce patterns of nearly perfect degree of lateral order over relatively large surface large area (more than 4 sq µm). The second task of present work was fabrication of ternary NP1/NP2/BCP hybrid composites with two different types of nanoparticles being selectively localized in different microdomains of phase segregated block copolymer matrix. So far as only few studies have been reported on developing of approaches toward ternary composites, creation of alternative and straight forward routes toward such systems is still a challenge. In the frame of this part of present work, silver nanoparticles (AgNPs) covered with polystyrene shell were prepared, with the purpose to be incorporated into polystarene phase of phase separated PS-b-PVP block copolymer matrix. Two different approaches were tested to achieve desired three-component system. First, supposed simple blending of block copolymer and two kinds of nanoparticles having specific affinity toward different blocks of BCP in common solvent. After preparation of MNP/AgNP/BCP composite thin film and subsequent solvent vapour annealing, different domains of microphase segregated PS-b-PVP BCP were filled with different type of nanoparticles. Alternatively, step-wise approach for nanoparticles incorporation was developed and implemented for successful selective nanoparticles incorporation. For this purpose polystyrene stabilized AgNPs (i.e. NP1) were initially mixed with PS-b-PVP BCP to produce composite thin films having nanoparticles selectively located within PS microdomains, while citrate-stabilized second type nanoparticles (i.e NP2) were deposited from their aqueous solutions into PVP domains of AgNP/PS-b-PVP composites. By partition of nanoparticles incorporation procedure into two distinct steps it was also possible to increase effective loading of each type of NPs into BCP matrix.

Darmstadt, Techn. Universiẗat, Diss., 2007. / Dateien im PDF-Format.

Zugl.: Köln, Universiẗat, Diss., 2007. / Literaturverz.