281 |
Analyse and Improve Internal Water Treatment System at STENA Recycling : Master's Programme in Mechanical EngineeringBrahmakulam jacob, Dany Paul, Johannesson, Gustaf January 2018 (has links)
The thesis work is done at STENA Recycling Halmstad. The recycling facility has a yearly capacity to process 110.000 tonnes of material. There is an internal water system that circulates water to each of the separation processes and cleans before recirculation. Due to environmental concerns and government regulations the internal water cannot be let out of the facility. In addition, the internal water treatment system at STENA was not efficiently cleaning the internal water causing frequent plant maintenance issues. The aim of the thesis is to improve the quality of the cleaned water from the internal water system. Qualitative data such as interviews and observations were combined with quantitative data that is measurements to reach the results, using a method called triangulation. Six Sigma (DMAIC) model was followed for the work execution. The internal water treatment has five process steps. Five improvements are identified, implemented and evaluated. The thesis work goal of less than 2% dirt in the clean water is achieved by improving the overall performance of the cleaning system by 48.5% after implementing improvements. As a part of the last phase of six sigma approach which is control phase, an operation manual is developed to maintain the internal water treatment system.
|
282 |
Optimización de procesos mediante six sigma validado por una simulación predictiva : caso : Archivo Regional LambayequeLluén Lozano, Christian Omar, Lluén Lozano, Christian Omar January 2008 (has links)
En la presente tesis se abordó el desarrollo de la metodología Six Sigma a fin de establecer un conjunto de lineamientos y recomendaciones para el mejoramiento de la calidad en una determinada institución pública. Por ello, se tomó como base, los datos encontrados en una entidad denominada: Archivo Regional de Lambayeque, la misma que en adelante será llamada bajo el acrónimo ARL, basándose tanto en sus documentos de gestión técnico - administrativa así como del uso de varias herramientas y técnicas de recolección de datos como cuestionarios, entrevistas, encuestas y la observación detallada de los procesos existentes. En cada uno de los pasos definidos en el proceso DMAIC de la metodología, se detallaron los métodos y herramientas estadísticas utilizadas con el fin de lograr un mayor entendimiento de cada uno de los procesos del ARL y llegar así al ideal Six Sigma, reduciendo considerablemente el número de DPMO (defectos por millón de oportunidades). Finalmente, y luego de analizar minuciosamente la información recabada, se verificó la validez de la misma haciendo uso de un simulador predictivo previamente seleccionado y diseñado para trabajar bajo el entorno licenciado de Microsoft. / Tesis
|
283 |
Adjustment of RapidScat Backscatter Measurements for Improved Radar ImagesMcDonald, Garrett Scott 01 June 2018 (has links)
RapidScat is a spaceborne wind scatterometer mounted on the International Space Station (ISS). The RapidScat mission lasted from September 2014 to November 2016. RapidScat enables the measurement of diurnal patterns of sigma-0 measurements. This capability is possible because of the non-sun-synchronous orbit of the ISS, in which the local time of day (LTOD) of sigma-0 measurements gradually shifts over time in any given location. The ISS platform is a relatively unstable platform for wind scatterometers. Because of the varying attitude of the ISS, RapidScat experiences a constant variation of its pointing vector. Variations of the pointing vector cause variations in the incidence angle of the measurement on the ground, which has a direct effect on sigma-0 measurements. In order to mitigate sigma-0 variations caused by incidence angle and LTOD, the dependence of on these parameters is modeled in order to enable a normalization procedure for sigma-0 . These models of sigma-0 dependence are determined in part by comparing RapidScat data with other active Ku-band instruments. The normalization procedure is designed to adjust the mean value of sigma-0 to be constant across the full range of significant parameter values to match the mean of sigma-0 at a particular nominal parameter value. The normalization procedure is tested both in simulation and with real sigma-0 measurements. The simulated normalization procedure is effective at modeling and removing sigma-0 dependence on incidence angle and LTOD over a homogeneous region. The variance in simulated images is reduced by the normalization procedure. The normalization procedure also reduces variance in real backscatter images of the Amazon and an arbitrary region in East Africa.
|
284 |
Influência da precipitação de fase O nas propriedades mecânicas e na resistência à corrosão de um aço inoxidável duplex UNS S32250 laminadoMoreira, Filipe Gaspar Matos January 2010 (has links)
Tese de mestrado integrado. Engenharia Metalúrgica e de Materiais. Faculdade de Engenharia. Universidade do Porto. 2010
|
285 |
Digital Sigma-Delta modulator with high SNR (100dB+)Pereira, Ricardo Jorge Moreira January 2011 (has links)
Tese de mestrado integrado. Engenharia Electrotécnica e de Computadores. Universidade do Porto. Faculdade de Engenharia. 2011
|
286 |
Modulateur Sigma Delta Passe-Haut et son application au convertisseur Sigma Delta à l'entrelacement temporelNguyen, Van Tam January 2004 (has links) (PDF)
Le convertisseur analogique-numérique fondé sur le principe de modulation SD est capable de fournir une très haute résolution. Bien qu'il nécessite un suréchantillonnage, il est peu sensible aux imperfections des composants. Le modulateur SD classique est donc très populaire pour les applications de bande étroite demandant une très haute résolution. Dans cette thèse, nous nous sommes intéressés à l'extension des applications du modulateur SD vers une bande passante plus large. Nous avons tout d'abord étudié l'architecture parallèle basant sur la modulation SD et proposé une nouvelle architecture basant sur la modulation SD passe-haut et l'entrelacement temporel permettant de réduire de façon significative le problème caractéristique du parallélisme, à savoir la disparité entre les canaux. Nous avons ensuite étudié le modulateur SD passe-haut et proposé une implémentation en technique des capacités commutées. Ce nouveau modulateur, contrairement au modulateur classique, est complètement immune au bruit de basse fréquence et peut être utilisé non seulement dans une architecture parallèle, mais aussi de façon autonome. Nous avons aussi modélisé la plupart de non-idéalités du modulateur en VHDL-AMS pour finalement arriver à une méthodologie de conception descendante qui permet de dériver les spécifications de tous les blocs du circuit à partir de performance visée pour le système complet. L'implémentation d'un modulateur SD passe-haut d'ordre 2 et un convertisseur SD passe-haut en combinant avec l'entrelacement temporel a été réalisée en technologie CMOS 0,35 mm. Enfin, notre travail nous a permis de démontrer non seulement l'avantage du modulateur SD passe-haut, mais aussi un perspective prometteur du modulateur SD parallèle pour les applications de très large bande.
|
287 |
Etude de la fonction du facteur de transcription plastidial, Sigma 3 chez Arabidopsis thalianaZghidi, Ouafa 30 June 2008 (has links) (PDF)
Trois ARN polymérases sont responsables de la transcription du génome plastidial. L'une d'entre elle, la PEP (Plastid-Encoded RNA Polymerase), est de type eubactérien et multimérique. Cette enzyme interagit avec des facteurs de transcription de type sigma au niveau des régions promotrices des gènes cibles. Chez Arabidopsis thaliana, six facteurs sigma sont codés par des gènes nucléaires et sont localisés dans les plastes. Nous avons étudié la fonction du facteur sigma 3 (SIG3), à l'aide de mutants d'insertion d'ADN-T d'Arabidopsis. L'analyse du profil d'expression des gènes plastidiaux (transcriptome) par puce à ADN nous a permis de montrer que le complexe PEP/SIG3 transcrit spécifiquement le gène psbN et régule l'expression des gènes atpH, atpA, atpE, atpF et atpB. Le gène psbN se trouve sur le brin opposé de l'opéron psbB, entre les gènes psbT et psbH. L'expression de psbN produit des ARNs antisens de psbT. Des expériences de protection à la RNase A/T1 nous permettent de suggérer que les transcrits sens et antisens de psbT forment in vivo un ARN double brin. Nous avons montré que chez le mutant sig3, le transcrit antisens de psbT est totalement absent alors que la protéine PsbT est plus abondante par rapport au sauvage. Ces résultats suggèrent que la formation d'un ARN double brin psbT sens/antisens diminue l'efficacité de la traduction de la protéine PsbT. Ainsi, le complexe SIG3-PEP, en reconnaissant spécifiquement le promoteur du gène psbN, permet la synthèse de transcrits complémentaires à psbT ce qui constitue un outil de régulation de l'expression de la protéine PsbT. Les gènes atpH et atpB font partie respectivement de l'opéron atpI/atpH/atpF/atpA et l'opéron atpB/atpE. En utilisant la spectinomycine, nous avons montré que l'expression des différents gènes codant les sous unités de l'ATP synthase plastidiale est exclusivement contrôlée par l'ARN polymérase plastidiale, PEP. Nous avons ensuite analysé l'expression de ces opérons dans le mutant sig3. Le gène atpH code la sous unité CF0-III du complexe de l'ATP synthase, 5-12 fois plus abondante que les autres sous unités. Le gène atpB code la sous unité β du complexe CF1 de l'ATP synthase. Nous avons observé par puce à ADN chez la plante sauvage que l'accumulation de l'ARNm atpH est 5 à 12 fois plus importante que les autres transcrits codant les sous unités de l'ATP synthase. Nous avons montré que l'ARNm atpH est produit soit par co-transcription des gènes atpI/atpH soit par transcription à partir d'un promoteur (PatpH-413) reconnu par le complexe SIG3-PEP. Nous suggérons ainsi que le complexe PEP/SIG3 pourrait participer par la régulation transcriptionnelle de l'expression du gène atpH à l'établissement de la stœchiométrie de l'ATP synthase plastidiale chez Arabidopsis thaliana. Par contre, l'opéron atpB/atpE est transcrit à partir de deux promoteurs: PatpB -520 et PatpB -467. Seul le promoteur PatpB -467 est sous le contrôle du facteur SIG3. Ces résultats suggérent donc que le facteur SIG3 régule de manière plus atténuée l'expression de l'opéron atpB/atpE.
|
288 |
Six Sigma och processförbättring : En fallstudie på Siemens Industrial Turbomachinery AB / Six Sigma and process improvement : A case study at Siemens Industrial Turbomachinery ABAndersson, Patrik, Norén, Erik January 2009 (has links)
<p>Denna rapport syftar till att undersöka hur Siemens Industrial Turbomachinery AB i Finspång har valt att arbeta med processförbättringsmetoden Six Sigma, som är en mycket populär metod för att genomföra processförbättringsprojekt och mycket attraktiv för företag som ska arbeta med sådana.</p><p> </p><p>Metoden bygger på statistik och att fatta välinformerade beslut. Detta görs genom att samla team-medlemmar från den process som ska förbättras och genom att göra mätningar inom sagda process. Man börjar ett projekt genom att definiera problemet, går vidare med att mäta den aktuella processen, analyserar sedan de data man fått in, försöker komma på lösningar och slutligen implementerar man den lösning man bedömt som bäst.</p><p> </p><p>Vi gjorde en kvalitativ fallstudie på företaget och intervjuade över ett dussin personer som hade olika grader av bekanthet med Six Sigma, för att få utsagor från personer med olika perspektiv på metoden. Av detta fick vi veta att de som har varit med i ett förbättringsprojekt eller har utbildat sig inom Six Sigma var begränsade till en knapp tiondel av de anställda på företaget, men att de som var insatta i metoden var ganska väl insatta.</p><p> </p><p>Vi går igenom ett antal faktorer inom Six Sigma och projekt baserade på metoden och ställer dessa mot relaterade teorier så att vi kan dra slutsatser.</p><p> </p><p>Slutligen tar vi upp våra slutsatser och avslutande reflektioner där vi kommer fram till att mycket av problemen med metoden ligger i om man inte använder den fullt ut utan försöker klara sig utan att ge de resurser som krävs men att metoden annars ger ett stabilt ramverk för processutveckling.</p>
|
289 |
Analog-to-Digital Converter Design for Non-Uniform QuantizationSyed, Arsalan Jawed January 2004 (has links)
<p>The thesis demonstrates a low-cost, low-bandwidth and low-resolution Analog-to- Digital Converter(ADC) in 0.35 um CMOS Process. A second-order Sigma-Delta modulator is used as the basis of the A/D Converter. A Semi-Uniform quantizer is used with the modulator to take advantage of input distributions that are dominated by smaller-amplitude signals e.g. Audio, Voice and Image-sensor signals. A Single-bit feedback topology is used with a multi-bit quantizer in the modulator. This topology avoids the use of a multi-bit DAC in the feedback loop – hence the system does not need to use digital correction techniques to compensate for a multi-bit DAC nonlinearity. </p><p>High-Level Simulations of the second-order Sigma-Delta modulator single-bit feedback topology along with a Semi-Uniform quantizer are performed in Cadence. Results indicate that a 5-bit Semi-Uniform quantizer with a Over-Sampling Ratio of 32, can achieve a resolution of 10 bits, in addition, a semi-uniform quantizer exhibits a 5-6 dB gain in SNR over its uniform counterpart for input amplitudes smaller than –10 dB. Finally, this system is designed in 0.35um CMOS process.</p>
|
290 |
Design and implementation of comparator for sigma delta modulatorAizad, Noor January 2006 (has links)
<p>Comparator is the main building block in an ADC architecture. Main purpose of the comparator is to compare a signal with a reference signal and produce an output depending on whether the input signal is greater or smaller than reference. Many architectures for comparators exist for various purposes. In this thesis, Latched comparator architecture is used for sigma delta modulator. This particular design has two main characteristics that are very important for sigma delta application. First characteristic is the cancellation of memory effect which increases the speed and reliability of the system and the second is, with this architecture, high sensitivity can be achieved.</p><p>The design and implementation of lathed comparator for sigma delta modulator is presented in this thesis work. Various non-linearities and performance parameters are discussed in detail. Practical implementation and circuit design issues are highlighted to achieve maximum sensitivity along with reasonable speed and accuracy.</p>
|
Page generated in 0.0492 seconds