The design of reflectarray surface currents that satisfy both radiation and user-defined antenna feasibility constraints is addressed through a novel paradigm which takes advantage of the non-uniqueness of inverse source (IS) problems. To this end, the synthesis is formulated in the IS framework and its non-measurable solutions are employed as a design DoF. Thanks to the adopted framework, a closed-form expression for the design of reflectarray surface currents is derived which does not require any iterative local/global optimization procedure and which inherently satisfies both the radiation and the feasibility design constraints. The features and potentialities of the proposed strategy are assessed through selected numerical experiments dealing with different reflectarray aperture types/sizes and forbidden region definitions.

This thesis studies the use of the Source Reconstruction Method (SRM) to characterize antennas. The SRM calculates equivalent sources/currents on an arbitrarily shaped reconstruction surface to represent the original antenna. This is done by enforcing that the original antenna and equivalent currents radiate the same field at user selected measurement locations. These equivalent currents spatially characterize the original antenna because they can be used in direct radiation problems to obtain field estimates anywhere outside the reconstruction surface, including the far-field. First a spherical SRM algorithm is implemented and the diagnostic capabilities of the SRM are also synthetically shown through an example with an array of elementary dipoles. It is then shown that the SRM compares well to pre-existing commercial antenna software over different frequencies and can also be used successfully with a partial dataset. It is demonstrated that the equivalent currents can also provide meaningful information with experimental data. Next the hierarchical matrix framework is studied in conjunction with the SRM to decrease the algorithm's memory requirement and increase the speed of execution. It is shown that it is beneficial to use the hierarchical matrix framework with the SRM when using Love's condition or with measured data on a surface very close to the reconstruction surface. The SRM is then used to obtain incident field estimates in microwave imaging systems. Using a 2D transverse magnetic framework, we show that even with the limited data available in typical microwave tomography setups the SRM can produce incident field estimates in the imaging domain. These estimates are then used along with an MR-GNI algorithm to image synthetic and experimental objects with uncalibrated measured data. / October 2016

In this work, an analytical approach is used along with nodal schemes for the solution of xed source two-dimensional neutron transport problems, in Cartesian geometry, de ned in heterogeneous medium, with anisotropic scattering. The methodology is developed from the discrete ordinates version of the two-dimensional transport equation along with the level symmetric angular quadrature set. One-dimensional equations for the averaged angular uxes are obtained by transverse integration of the original problem. Such equations are solved by the ADO method. Explicit expressions in spatial variables are derived for averaged uxes in each region in which the domain is subdivided. The solution in each region is coupled with that of its neighbouring regions to provide the solution in the whole domain, without resorting to using iterative methods. As usual in nodal schemes, auxiliary equations are needed. Here two di erent treatments were given to this issue: one based on relations between the unknown ows in the contours of the regions and the average angular uxes, and another in which these ows are approximated by polynomials of order zero being in this case, incorporated into the source term. Numerical results were compared with available literature showing the solution preserve the computational e ciency which has been a good feature of the ADO method when applied to different problems. / Neste trabalho, uma abordagem analítica é utilizada juntamente com esquemas nodais na resolução de problemas bidimensionais de transporte de nêutrons de fonte fixa, em geometria cartesiana, definidos em meio heterogêneo, com espalhamento anisotrópico. A metodologia proposta é desenvolvida a partir da versão em ordenadas discretas da equação de transporte bidimensional, juntamente com o esquema de quadratura simétrica de nível. As equações em ordenadas discretas são integradas transversalmente, originando equações unidimensionais para os fluxos angulares médios. Tais equações unidimensionais são resolvidas pelo método ADO (Analytical Discrete Ordinates). Expressões explícitas nas variáveis espaciais são derivadas para os fluxos angulares médios em cada região em que o domínio foi subdividido. A solução em cada região é acoplada às regiões vizinhas, para fornecer a solução no domínio todo, sem a utilização de métodos iterativos. Como usual em esquemas nodais, equações auxiliares são necessárias, recebendo neste estudo dois tratamentos distintos: um em que os fluxos desconhecidos nos contornos das regiões assumem relações de proporcionalidade, com os fluxos angulares médios; e, outro, em que esses fluxos são aproximados por polinômios de ordem zero sendo, nesse caso, incorporados ao termo fonte. Resultados numéricos obtidos e comparados com disponíveis na literatura mostram a viabilidade da formulação, mantendo a eficiência computacional já verificada no tratamento de outros problemas, com o uso do método ADO.

In this work, an analytical approach is used along with nodal schemes for the solution of xed source two-dimensional neutron transport problems, in Cartesian geometry, de ned in heterogeneous medium, with anisotropic scattering. The methodology is developed from the discrete ordinates version of the two-dimensional transport equation along with the level symmetric angular quadrature set. One-dimensional equations for the averaged angular uxes are obtained by transverse integration of the original problem. Such equations are solved by the ADO method. Explicit expressions in spatial variables are derived for averaged uxes in each region in which the domain is subdivided. The solution in each region is coupled with that of its neighbouring regions to provide the solution in the whole domain, without resorting to using iterative methods. As usual in nodal schemes, auxiliary equations are needed. Here two di erent treatments were given to this issue: one based on relations between the unknown ows in the contours of the regions and the average angular uxes, and another in which these ows are approximated by polynomials of order zero being in this case, incorporated into the source term. Numerical results were compared with available literature showing the solution preserve the computational e ciency which has been a good feature of the ADO method when applied to different problems. / Neste trabalho, uma abordagem analítica é utilizada juntamente com esquemas nodais na resolução de problemas bidimensionais de transporte de nêutrons de fonte fixa, em geometria cartesiana, definidos em meio heterogêneo, com espalhamento anisotrópico. A metodologia proposta é desenvolvida a partir da versão em ordenadas discretas da equação de transporte bidimensional, juntamente com o esquema de quadratura simétrica de nível. As equações em ordenadas discretas são integradas transversalmente, originando equações unidimensionais para os fluxos angulares médios. Tais equações unidimensionais são resolvidas pelo método ADO (Analytical Discrete Ordinates). Expressões explícitas nas variáveis espaciais são derivadas para os fluxos angulares médios em cada região em que o domínio foi subdividido. A solução em cada região é acoplada às regiões vizinhas, para fornecer a solução no domínio todo, sem a utilização de métodos iterativos. Como usual em esquemas nodais, equações auxiliares são necessárias, recebendo neste estudo dois tratamentos distintos: um em que os fluxos desconhecidos nos contornos das regiões assumem relações de proporcionalidade, com os fluxos angulares médios; e, outro, em que esses fluxos são aproximados por polinômios de ordem zero sendo, nesse caso, incorporados ao termo fonte. Resultados numéricos obtidos e comparados com disponíveis na literatura mostram a viabilidade da formulação, mantendo a eficiência computacional já verificada no tratamento de outros problemas, com o uso do método ADO.

In this work, an analytical approach is used along with nodal schemes for the solution of xed source two-dimensional neutron transport problems, in Cartesian geometry, de ned in heterogeneous medium, with anisotropic scattering. The methodology is developed from the discrete ordinates version of the two-dimensional transport equation along with the level symmetric angular quadrature set. One-dimensional equations for the averaged angular uxes are obtained by transverse integration of the original problem. Such equations are solved by the ADO method. Explicit expressions in spatial variables are derived for averaged uxes in each region in which the domain is subdivided. The solution in each region is coupled with that of its neighbouring regions to provide the solution in the whole domain, without resorting to using iterative methods. As usual in nodal schemes, auxiliary equations are needed. Here two di erent treatments were given to this issue: one based on relations between the unknown ows in the contours of the regions and the average angular uxes, and another in which these ows are approximated by polynomials of order zero being in this case, incorporated into the source term. Numerical results were compared with available literature showing the solution preserve the computational e ciency which has been a good feature of the ADO method when applied to different problems. / Neste trabalho, uma abordagem analítica é utilizada juntamente com esquemas nodais na resolução de problemas bidimensionais de transporte de nêutrons de fonte fixa, em geometria cartesiana, definidos em meio heterogêneo, com espalhamento anisotrópico. A metodologia proposta é desenvolvida a partir da versão em ordenadas discretas da equação de transporte bidimensional, juntamente com o esquema de quadratura simétrica de nível. As equações em ordenadas discretas são integradas transversalmente, originando equações unidimensionais para os fluxos angulares médios. Tais equações unidimensionais são resolvidas pelo método ADO (Analytical Discrete Ordinates). Expressões explícitas nas variáveis espaciais são derivadas para os fluxos angulares médios em cada região em que o domínio foi subdividido. A solução em cada região é acoplada às regiões vizinhas, para fornecer a solução no domínio todo, sem a utilização de métodos iterativos. Como usual em esquemas nodais, equações auxiliares são necessárias, recebendo neste estudo dois tratamentos distintos: um em que os fluxos desconhecidos nos contornos das regiões assumem relações de proporcionalidade, com os fluxos angulares médios; e, outro, em que esses fluxos são aproximados por polinômios de ordem zero sendo, nesse caso, incorporados ao termo fonte. Resultados numéricos obtidos e comparados com disponíveis na literatura mostram a viabilidade da formulação, mantendo a eficiência computacional já verificada no tratamento de outros problemas, com o uso do método ADO.

The focus of this paper is on conditional stability estimates for ill-posed inverse problems in partial differential equations. Conditional stability estimates have been obtained in the literature by a couple different methods. In this paper we propose a method called interpolation method, which is based on interpolation in variable Hilbert scales. We are going to work out the theoretical background of this method and show that optimal conditional stability estimates are obtained. The capability of our method is illustrated by a comprehensive collection of different inverse and ill-posed PDE problems containing elliptic and parabolic problems, one source problem and the problem of analytic continuation.

The focus of this paper is on conditional stability estimates for ill-posed inverse problems in partial differential equations. Conditional stability estimates have been obtained in the literature by a couple different methods. In this paper we propose a method called interpolation method, which is based on interpolation in variable Hilbert scales. We are going to work out the theoretical background of this method and show that optimal conditional stability estimates are obtained. The capability of our method is illustrated by a comprehensive collection of different inverse and ill-posed PDE problems containing elliptic and parabolic problems, one source problem and the problem of analytic continuation.

Wir betrachten die lineare inverse Probleme mit gestörter rechter Seite und gestörtem Operator in Hilberträumen, die inkorrekt sind. Um die Auswirkung der Inkorrektheit zu verringen, müssen spezielle Lösungsmethode angewendet werden, hier nutzen wir die sogenannte Tikhonov Regularisierungsmethode. Die Regularisierungsparameter wählen wir aus das verallgemeinerte Defektprinzip. Eine typische numerische Methode zur Lösen der nichtlinearen äquivalenten Defektgleichung ist Newtonverfahren. Wir schreiben einen Algorithmus, die global und monoton konvergent für beliebige Startwerte garantiert. Um die Stabilität zu garantieren, benutzen wir die Glattheit der Lösung, dann erhalten wir eine sogenannte bedingte Stabilität. Wir demonstrieren die sogenannte Interpolationsmethode zur Herleitung von bedingten Stabilitätsabschätzungen bei inversen Problemen für partielle Differentialgleichungen.

Wir betrachten die lineare inverse Probleme mit gestörter rechter Seite und gestörtem Operator in Hilberträumen, die inkorrekt sind. Um die Auswirkung der Inkorrektheit zu verringen, müssen spezielle Lösungsmethode angewendet werden, hier nutzen wir die sogenannte Tikhonov Regularisierungsmethode. Die Regularisierungsparameter wählen wir aus das verallgemeinerte Defektprinzip. Eine typische numerische Methode zur Lösen der nichtlinearen äquivalenten Defektgleichung ist Newtonverfahren. Wir schreiben einen Algorithmus, die global und monoton konvergent für beliebige Startwerte garantiert. Um die Stabilität zu garantieren, benutzen wir die Glattheit der Lösung, dann erhalten wir eine sogenannte bedingte Stabilität. Wir demonstrieren die sogenannte Interpolationsmethode zur Herleitung von bedingten Stabilitätsabschätzungen bei inversen Problemen für partielle Differentialgleichungen.