Plasma pretreatments are environmentally benign and energy efficient processes for modifying the surface chemistry of materials. In an effort to improve the strength of the titanium alloy/FM-5 polyimide adhesive joint for aerospace applications, oxygen plasma pretreatments and novel thin plasma polymerized (PP) films were investigated as adhesion promoters. Plasma treatments were carried out using custom-built, low pressure, radio frequency, inductively coupled plasma reactors. Ti-6Al-4V coupons were plasma treated and used to prepare miniature single lap shear (SLS) joints. The effects of plasma pretreatments on surface chemistry were studied using x-ray photoelectron spectroscopy (XPS), Auger electron spectroscopy (AES), Fourier transform infrared analysis (FTIR), and contact angle measurements. Relationships between composition, mechanical properties, and adhesion of PP films on Ti-6Al-4V and silicon wafers were investigated. The nanomechanical properties (modulus, hardness and adhesion) were studied using atomic force microscopy (AFM) nanoindentation and nanoscratch testing. A design of experiments (DOE) three factorial model was used to optimize the parameters for oxygen plasma treatments. Oxygen plasma pretreatments enhanced joint strength by cleaning the titanium surface and creating an extended oxide layer. Nanoindentation of oxygen plasma treated substrates showed no change in the surface mechanical properties due to the oxygen plasma treatment. This suggested that the improved SLS strength of the oxygen plasma pretreated substrates was due to the cleaning of the substrate and the removal of carbonaceous contaminants, rather than any changes in the morphology of the oxide layer. PP acetylene films were predominantly carbon, with oxygen as the other main constituent (incorporated mostly as C-O and C=O). For all SLS specimens tested, the adhesion between PP acetylene and FM-5 adhesive was adequate. However, the strength of SLS joints was limited by the adhesion of the PP acetylene to the Ti-6Al-4V substrate. The effects of a large number of plasma parameters, such as substrate pretreatment, carrier gas, input power, flow rate and film thickness were investigated. All samples failed at the PP film/Ti-6Al-4V interface or within the PP acetylene film, and thicker PP films yielded lower SLS strengths. PP films deposited at lower power exhibited higher hardness and reduced modulus than films deposited at higher power. Overall, thinner films exhibited higher hardness and reduced Young's modulus than thicker films. PP films of higher hardness yielded higher critical loads at debond (thickness normalized) during the nanoscratch test. Thin films were developed via the vapor plasma polymerization of titanium(IV) isobutoxide (TiiB). XPS results suggested that titanium was incorporated into the film as TiO2 clusters dispersed in an organic matrix. No evidence for Ti-C was obtained from the XPS spectra. PP films of TiiB were much more compliant than PP acetylene films. This behavior was attributed to decreased fragmentation and lower crosslinking that occurred during PP TiiB film deposition. These PP films did not exhibit sol-gel-like qualities, and because of the way titanium was incorporated into the films, a more appropriate name for these films might be "titanium dioxide-doped plasma polymerized films." / Ph. D.

Single-walled carbon nanotubes (SWCNTs) were decorated with metal nanoparticles. Using a complementary analysis with spatially resolved micro-Raman spectroscopy, high resolution transmission electron microscopy, electron diffraction, and tip-enhanced Raman spectroscopy, we show that the SWCNTs form bundles in which smaller diameter SWCNTs are the ones preferentially affected by the presence of Au and Ag nanoparticles. This result is exploited to evaluate the structural organization of SWCNTs with mixed chiralities in bundles, leading us to postulate that smaller diameter SWCNTs surround larger ones. We found that this effect occurs for very distinct scenarios including SWCNTs both in nanometer thin films and in field effect transistor configurations at the wafer-level, suggesting a universal phenomenon for SWCNTs deposited from dispersions. / Einwandige Kohlenstoffnanoröhren (SWCNTs) wurden mit Metallnanopartikeln dekoriert. Nach Anwendung von ortsauflösender Raman-Mikroskopie und -Spektroskopie, Transmissionselektronenmikroskopie, Elektronenbeugung und spitzenverstärkter Ramanspektroskopie wird festgestellt, dass sich aus den SWCNTs fasrige Bündel formen, wobei die analytischen Signaturen der SWCNTs mit kleinerem Durchmesser stärker von der Präsenz der Gold- und Silbernanopartikel beeinflusst werden als die der größeren. Dieses Resultat kann damit erklärt werden, dass in der Struktur solcher Bündel SWCNTs mit kleinerem Durchmesser außen und SWCNTs mit größerem Durchmesser innen zu liegen kommen. Wir konnten diesen Effekt für verschiedene Szenarien nachweisen: i) für SWCNTs in nanometerdünnen ungeordneten Filmen und ii) für SWCNTs, ausgerichtet zwischen Elektroden in der Geometrie eines Feldeffekttransistors. Diese Feststellung legt nahe, dass es sich um ein universelles Phänomen für aus flüssigen Dispersionen abgeschiedene SWCNTs handelt. / Dieser Beitrag ist aufgrund einer (DFG-geförderten) Allianz- bzw. Nationallizenz frei zugänglich.

No description available.

<p>Surface preparation and its exposure to different processing conditions is a key step in heterogeneous integration of electronics, photonics, fluidics and/or mechanical components for More-than-Moore applications. Therefore, it is critical to understand how various processing and environmental conditions affect the surface properties of bonding substrates. In this thesis, the effects of oxygen reactive-ion etching (O₂ RIE) plasma followed by storage in ambient and 98% relative humidity on some key surface properties such as roughness, water contact angle, hardness, and the elemental and compositional states of three materials – silicon (Si), silicon dioxide (SiO₂) and glass – are investigated to analyze their influence on bondability. Lower O₂ RIE plasma activation times cause low surface roughness, high surface reactivity and high hydrophilicity of Si, SiO₂ and glass. The decrease of hardness of Si and SiO₂ with increased activation time is attributed to higher surface roughness and formation of amorphous layers of Si. While contact angle and surface roughness results show correlation with bondability, the role of hardness on bondability requires further investigation. The high-resolution X-ray Photoelectron Spectroscopy (XPS) spectra of O₂ RIE treated Si, SiO₂ and glass showed the presence of Si(-O)₂ resulting in highly reactive surfaces. The high surface reactivity of Si, SiO₂ and glass obtained from oxygen plasma activation at lower activation times can result in better bondability. Also, the ambient humidity-induced Si(-OH)_x plays an important role in the hydrophilic wafer bonding of Si and SiO₂ which may require a low temperature heating.</p> / Master of Applied Science (MASc)

The title compound, C20H18O3, crystallizes in the space group P21/c with one mol­ecule in the asymmetric unit of the cell. The fluorene skeleton is nearly planar and the crystal structure is composed of mol­ecular layers extending parallel to the (302) plane. Within a layer, one formyl oxygen atom participates in the formation of a Carene—H...O bond, which is responsible for the formation of an inversion symmetric supra­molecular motif of graph set R22(10). A second oxygen atom is involved in an intra­molecular Carene—H...O hydrogen bond and is further connected with a formyl hydrogen atom of an adjacent mol­ecule. A Hirshfeld surface analysis indicated that the most important contributions to the overall surface are from H...H (46.9%), O...H (27.9%) and C...H (17.8%) inter­actions.

Metal oxides are of immense technological importance. Their wide variety of structural and electronic characteristics leads to a flexibility unrivalled by other groups of materials. However, there is still much debate about the fundamental properties of some of the most widely used oxides, including TiO₂ and In₂O₃. This work presents high quality, in-depth characterisation of these two oxides in pure and doped form, including soft and hard X-ray photoelectron spectroscopy and X-ray diffraction. Bulk samples as well as thin film samples were prepared analysed. For the preparation of thin films a high quality sol-gel dip-coating method was developed, which resulted in epitaxial films. In more detail the organisation of the thesis is as follows: Chapter 1 provides an introduction to key ideas related to metal oxides and presents the metal oxides investigated in this thesis, In₂O₃, Ga₂O₃, Tl₂O₃, TiO₂, and SnO₂. Chapter 2 presents background information and Chapter 3 gives the practical details of the experimental techniques employed. Chapters 4 presents reciprocal space maps of MBE-grown In₂O₃ thin films and nanorods on YSZ substrates. Chapters 5 and 6 investigate the doping of In₂O₃ bulk samples with gallium and thallium and introduce a range of solid state characterisation techniques. Chapter 7 describes the development of a dip-coating sol-gel method for the growth of thin films of TiO₂ and shows 3D reciprocal space maps of the resulting films. Chapter 8 concerns hard x-ray photoelectron spectroscopy of undoped and Sn-doped TiO₂. Chapter 9 interconnects previous chapters by presenting 2D reciprocal space maps of nano structured epitaxial samples of In₂O₃ grown by the newly developed sol-gel based method. Chapter 10 concludes this thesis with a summary of the results.

Monolayers of the cationic surfactant hexadecyltrimethylammonium halide (CTAX, where X = F¯, Cl¯, Br¯, and I¯) have been studied at the air-water and oilwater interfaces. At the air-water interface, the effects of the halide counterion and the addition of counterion were investigated. Sum-frequency spectroscopy (SFS), ellipsometry, and surface tensiometry indicated that the counterion changed the efficiency and effectiveness of the surfactant, both decreasing in the order of Br¯> Cl¯>F¯. The addition of salt in the form of 0.1 M KX was found to reduce the cmc but had little effect on the limiting area per molecule attained at the cmc, which increased from 44 Ų for CTAB to 65 Ų for CTAC and ca. 94 Ų for CTAF. Neither SFS nor ellipsometry provided any firm evidence for specific effects of the halide ions on the structure of the surfactant monolayers. For CTAB monolayers in the absence of excess electrolyte, the effect of area per molecule on the sum-frequency (SF) spectra was studied. Mixed monolayers of CTAB and tetradecane at the air-water interface exhibit a first-order phase transition from a conformationally disordered to a conformationally ordered state as the temperature is lowered. The phase transition occurs ca. 11 °C above the bulk melting point of tetradecane. A new experimental arrangement is described for acquiring SF spectra from surfactants at the oil-water interface. The key features of this approach are the stabilisation of a thin oil film between a sapphire prism and an aqueous phase, and the use of total internal reflection to enhance the total signal and discriminate against signals from other interfaces in the system. With this new methodology, the first SF vibrational spectra of surfactant monolayers at an alkane-water interface were obtained. Surface tensiometry was used to characterise the monolayers further. The structure of CTAB monolayers at the hexadecane-water interface was determined by SFS and compared with monolayers of CTAB at the air-water interface. At low concentrations, CTAB/hexadecane showed the expected features in the C-H stretching region, characteristic of a conformationally disordered monolayer. As the bulk concentration approached the critical micelle concentration, the spectra changed to one characteristic of a more ordered, upright conformation. Ellipsometric measurements supported this conclusion. This qualitative structural change is not observed in analogous monolayers at the air-water interface or CCl₄-water interface, or in surfactant solutions in contact with a hydrophobic solid surface.

Carbon-based materials are poised to be an important class of 21st century materials, for bio-medical, bio-electronic, and bio-sensing applications. Diamond and polymers are two examples of carbon-based materials of high interest to the bio-materials community. Diamond, in its conductive form, can be used as an electrochemical bio-sensor, whilst its nanoparticle form is considered a non-inflammatory platform to deliver drugs or to grow neuronal cells. Polymers, especially when chemically modified, have been used extensively in biological environments, from anti-microbial use to drug delivery. The large-scale use of either material for biological use is limited by two factors: ease of chemical modification and the paucity of knowledge of their surface chemistry in aqueous media. This thesis addresses aspects of both these issues. The first study reported is an in situ study of the adsorption dynamics of an exemplar globular protein (bovine serum albumin, BSA) on nanodiamond using the relatively novel quartz crystal microbalance with dissipation (QCM-D) technique. For the first time, QCM-D enabled the detailed study of protein dynamics (i.e. kinetics, viscoelastic properties, overlayer structure, etc.) onto nanodiamond thin films having various surface chemistry and roughness. The dynamics of protein adsorption is found to be sensitive to surface chemistry at all stages of adsorption, but it is only sensitive to surface roughness during initial adsorption phases. Our understanding of the nanodiamond-biology interface is enhanced by this study, and it suggests that QCM-D is useful for the study of the surface chemistry of nanoparticle forms of inorganic materials. A second study concerns a novel surface functionalization scheme, based on carbene and azo-coupling chemistry, which has been recently introduced as a practical, facile method for modifying the surfaces of polymers. Using modern surface characterization techniques, it is demonstrated that a chemical linker can be attached to polystyrene surfaces using carbene-based chemistry, and that further chemical functionality can be added to this chemical linker via an azo-coupling reaction. In situ studies of protein dynamics at these interfaces were conducted using QCM-D, thus enabling a link between specific protein behaviour and the polymer surface chemical termination chemistry to be made. A third area of study of investigates the use of diamond electrodes as a bio-sensor for dopamine under physiological conditions. For these conditions, ascorbic acid interferes with the dopamine oxidation signal, in ways that render the two signals irresolvable. Various modifications are used in attempts to reduce this interference, including: small and large cathodic treatments, grafting of electro-active polymers, addition of carbon nanotubes, and hydrogen plasma treatment. Those modifications leading to the hydrogen-termination of diamond are shown to work the best. Notably, hydrogen plasma treatment effects the complete electrochemical separation of dopamine and ascorbic acid at a diamond electrode. This is the first time this has been accomplished without adding non-diamond materials to the diamond electrode surface.

Cette thèse propose une approche du mémoriel qui interroge la production de la mémoire dans son caractère processuel. Elle comporte trois caractéristiques principales. D’abord, elle met l’accent sur une pluralité des temps qui participe de la production de la mémoire (mais aussi de l’instauration de collectivités et de la production de leurs continuités). Elle place aussi les processus de représentation au cœur de ses questionnements – notamment, elle met l’accent sur les manières par lesquelles la mémoire est constituée par la représentation (au lieu d’examiner les manières par lesquelles la mémoire est représentée). Enfin, elle interroge les manières par lesquelles la production de la mémoire concourt à délimiter, entretenir et faire être des collectivités, et quelles formes de collectivisation sont à cet égard réalisées. Le premier chapitre expose cette approche de la mémoire en constraste avec une présentation de trois grandes familles d’approches – les approches de la mémoire collective, celles de la mémoire culturelle et les approches présentistes – qui appréhendent la mémoire comme un construit. Il explique aussi comment je mets le mémoriel à profit dans une analyse de surface qui appréhende la constitution des représentations par lesquelles l’ex-hockeyeur Maurice Richard et l’ex-animatrice et auteure Janette Bertrand sont établis comme personnalités publiques, par le biais de technologies et de figures d’individualité publique qui les font être de manières singulières. Dans cette optique, je réalise, dans le deuxième chapitre, une analyse de la constitution de Maurice Richard comme héros, et dans le troisième, un examen de la constitution de Janette Bertrand comme pionnière. Dans le quatrième et dernier chapitre, je constate notamment les effectivités respectives des technologies et des procédés de représentation par lesquels des personnalités publiques sont instaurées. Je mets aussi en lumière que ces technologies et les éléments qu’elles produisent, traversent et mettent en relation, s’appréhendent à chaque fois dans la singularité de leurs rencontres. Je conclus ensuite en mettant en lumière les manières par lesquelles mon approche du mémoriel contribue aux études de la mémoire, lesquelles sont l’objet d’une disciplinarisation croissante. / This thesis proposes an approach of the mémoriel which questions the production of memory in its processual character. It has three main features. First, it focuses on a plurality of times involved in the production of memory (but also the establishment of local communities and the production of their continuities). It also places the processes of representation at the heart of its questionings - in particular, it emphasizes the ways in which memory is constituted by representation (instead of examining the ways in which memory is represented). Finally, it questions the ways in which the production of memory contributes to circumscribe, to maintain and to make communities, and what forms of collectivization are realized in this respect. The first chapter outlines this approach to memory in contrast with a presentation of three major families of approaches - approaches to collective memory, approaches of cultural memory and presentist approaches – which apprehend memory as a construct. It also explains how I put the mémoriel to good use in a surface analysis which captures the constitution of representations by which the former hockey player Maurice Richard and the former host and television writer Janette Bertrand are established as public figures, through technologies and figures of public individuality which bring them into being in singular ways. In this perspective, I present, in the second chapter, an analysis of the constitution of Maurice Richard as a hero, and in the third, an analysis of the constitution of Janette Bertrand as a pioneer. In the fourth and final chapter, I notice in particular the effectiveness of the respective technologies and processes of representation by which these public personalities are established. I also bring to light that these technologies and the elements which they produce, run through and put into relation are constantly apprehensible in the singularity of their meetings. I then conclude by outlining the manner in which my approach of the mémoriel contributes to memory studies, a field which is the object of an increasing disciplinarization.

Cette thèse propose une approche du mémoriel qui interroge la production de la mémoire dans son caractère processuel. Elle comporte trois caractéristiques principales. D’abord, elle met l’accent sur une pluralité des temps qui participe de la production de la mémoire (mais aussi de l’instauration de collectivités et de la production de leurs continuités). Elle place aussi les processus de représentation au cœur de ses questionnements – notamment, elle met l’accent sur les manières par lesquelles la mémoire est constituée par la représentation (au lieu d’examiner les manières par lesquelles la mémoire est représentée). Enfin, elle interroge les manières par lesquelles la production de la mémoire concourt à délimiter, entretenir et faire être des collectivités, et quelles formes de collectivisation sont à cet égard réalisées. Le premier chapitre expose cette approche de la mémoire en constraste avec une présentation de trois grandes familles d’approches – les approches de la mémoire collective, celles de la mémoire culturelle et les approches présentistes – qui appréhendent la mémoire comme un construit. Il explique aussi comment je mets le mémoriel à profit dans une analyse de surface qui appréhende la constitution des représentations par lesquelles l’ex-hockeyeur Maurice Richard et l’ex-animatrice et auteure Janette Bertrand sont établis comme personnalités publiques, par le biais de technologies et de figures d’individualité publique qui les font être de manières singulières. Dans cette optique, je réalise, dans le deuxième chapitre, une analyse de la constitution de Maurice Richard comme héros, et dans le troisième, un examen de la constitution de Janette Bertrand comme pionnière. Dans le quatrième et dernier chapitre, je constate notamment les effectivités respectives des technologies et des procédés de représentation par lesquels des personnalités publiques sont instaurées. Je mets aussi en lumière que ces technologies et les éléments qu’elles produisent, traversent et mettent en relation, s’appréhendent à chaque fois dans la singularité de leurs rencontres. Je conclus ensuite en mettant en lumière les manières par lesquelles mon approche du mémoriel contribue aux études de la mémoire, lesquelles sont l’objet d’une disciplinarisation croissante. / This thesis proposes an approach of the mémoriel which questions the production of memory in its processual character. It has three main features. First, it focuses on a plurality of times involved in the production of memory (but also the establishment of local communities and the production of their continuities). It also places the processes of representation at the heart of its questionings - in particular, it emphasizes the ways in which memory is constituted by representation (instead of examining the ways in which memory is represented). Finally, it questions the ways in which the production of memory contributes to circumscribe, to maintain and to make communities, and what forms of collectivization are realized in this respect. The first chapter outlines this approach to memory in contrast with a presentation of three major families of approaches - approaches to collective memory, approaches of cultural memory and presentist approaches – which apprehend memory as a construct. It also explains how I put the mémoriel to good use in a surface analysis which captures the constitution of representations by which the former hockey player Maurice Richard and the former host and television writer Janette Bertrand are established as public figures, through technologies and figures of public individuality which bring them into being in singular ways. In this perspective, I present, in the second chapter, an analysis of the constitution of Maurice Richard as a hero, and in the third, an analysis of the constitution of Janette Bertrand as a pioneer. In the fourth and final chapter, I notice in particular the effectiveness of the respective technologies and processes of representation by which these public personalities are established. I also bring to light that these technologies and the elements which they produce, run through and put into relation are constantly apprehensible in the singularity of their meetings. I then conclude by outlining the manner in which my approach of the mémoriel contributes to memory studies, a field which is the object of an increasing disciplinarization.