Zugl.: Aachen, Techn. Hochsch., Diss., 2008.

Stuttgart, Univ., Diss., 2003.

Στην παρούσα διπλωματική εργασία παρουσιάζεται η μελέτη της κατασκευής του οδικού έργου « Κατασκευή οδού Ηγουμενίτσας – Πρέβεζας, βελτίωση κατά τμήματα, υποτμήμα 4: Καρτέρι Γερακάρι – Πάργα από Χ. Θ. 0+000 έως Χ. Θ. 14.937,20 ». Έμφαση δίνεται στο τμήμα όπου παρουσιάζεται το μεγαλύτερο όρυγμα, δηλαδή από Χ.Θ. 2+168,78 έως Χ.Θ. 2+448,78. Σκοπός της διπλωματικής εργασίας είναι, μετά την αναλυτική και ολοκληρωμένη παρουσίαση της μελέτης, να γίνει ο προϋπολογισμός του έργου οδοποιίας. / In this paper we study the construction of road project 'Construction of road Igoumenitsa - Preveza, improvement in chambers subsection 4 Karteri Gerakari - Parga by Ch 0 +000 to Ch 14,937.20. " Emphasis is given in section showing the largest trench, by Ch 2+168.78 to Ch 2+448.78. The aim of this thesis is, after detailed and comprehensive presentation of the research to make the budget road construction project.

Este trabalho apresenta o desenvolvimento de uma técnica construtiva inédita para dutos enterrados intitulada Geovala. Esta técnica consiste na instalação de um geossintético sobre uma vala, preenchida ou não com material fofo, localizado acima do duto com o principal objetivo de reduzir os esforços que atingem a estrutura. Para contribuir na avaliação do sistema proposto foi realizado um programa de ensaios em pequenas e grandes dimensões no laboratório de geossintéticos da Escola de Engenharia de São Carlos EESC/USP. Neste programa de ensaios foi possível verificar que o sistema Geovala pode reduzir drasticamente as tensões na parede do duto e na envoltória de solo ao redor do duto. Além disso, um método analítico foi proposto para prever os deslocamentos verticais, deformações e esforços de tração gerados no geotêxtil, durante o rocesso construtivo e sobrecarga. Finalmente, verificou-se que os deslocamentos do geotêxtil previstos pelo método foram similares aos deslocamentos registrados nos ensaios experimentais. / This thesis presents the development of an unpublished constructive technique for buried pipes entitled Geovala. This technique comprises of the installation of a geosynthetic over a trench, filled or not with soft material, located above the pipe with the main objective of reducing the loads on the structure. To evaluate the proposed technique small and large scale testing programs were carried out at the laboratory of geosynthetics of the School of Engineering at Sao Carlos EESC/USP. In this testing program it was possible to verify that the Geovala system can reduce drastically the loads on the walls of the pipe and in the surrounding soil. Besides, an analytical method was proposed to predict the vertical displacement, deformations and tensile stress on the geosynthetic, during the constructive process and surcharge. Finally, it was verified that the displacements of the geotextile predicted by the analytical method were similar to the displacements recorded in the experimental tests.

Este trabalho apresenta resultados de ensaios laboratoriais e de análises paramétricas, realizadas através do método dos elementos finitos, para a avaliação do comportamento do geocomposto MacDrain 2S quando utilizado como elemento compressível na técnica da trincheira induzida para redução de tensões sobre estruturas enterradas. Mostra-se que este geocomposto fabricado pela Maccaferri América Latina, que tradicionalmente é aplicado em obras de drenagem, apresentou ótimo desempenho para o fim proposto, proporcionando redução de tensões sobre o conduto de até 85,5%. Mostra-se ainda que a utilização de uma camada de geotêxtil sobre o elemento compressível não implica em grandes benefícios de desempenho, o que torna sua utilização descartável. Os resultados experimentais, refinados através das análises numéricas, mostraram que a camada indutora deve ser posicionada o mais próximo possível do conduto, sendo que o número de camadas da inclusão pouco influencia na eficiência do sistema. Valores adequados de larguras das inclusões devem se situar numa faixa entre 2 e 2,5 vezes a distância entre a inclusão e o topo do conduto / This work presents results of laboratory tests and parametric analyses using the finite element method to evaluate the behavior of the MacDrain 2S geocomposite when used as compressible layer of the induced trench method to reduce vertical earth stress on buried structures. The analyses showed that this geocomposite, manufactured by Maccaferri América Latina, that traditionally is applied in drainage works, presented excellent behavior, providing stress reduction up to 85,5%. The results showed that the use of a geotextile layer located over the compressible element did not show a performance, what turns it dispensable. The experimental results, confirmed by the numeric analyses, showed that the compressible layer must be located as near as possible to the culvert crown, and the number of inclusion did not play important role on the system performance. Appropriate values of inclusion width must be situated between 2 and 2,5 times the distance between the geocomposite and the top of the conduit

Este trabalho tem como objetivos avaliar, para eventos de chuvas simuladas, o comportamento hidráulico de uma trincheira de infiltração experimental instalada na EESC/USP e propor uma nova metodologia de dimensionamento para trincheiras de infiltração. Para realizar a avaliação, foram conduzidos ensaios experimentais para determinar o volume infiltrado, sendo este calculado pela diferença entre o volume de entrada, medido através de vertedor triangular, e o volume armazenado na trincheira, medido a partir de medidor de nível. Em relação à nova metodologia de dimensionamento, esta foi proposta com base no modelo de Green-Ampt adaptado ao processo de infiltração horizontal. Os parâmetros de entrada do modelo: umidade, potencial matricial e condutividade hidráulica saturada, foram determinados, respectivamente, através de sondas que utilizam a Reflectometria no Domínio do Tempo (TDR), por curvas de retenção determinadas em laboratório pela técnica do papel filtro e câmara de Richards e por ensaio laboratorial com permeâmetro de carga constante. As curvas de retenção além de serem determinadas por dois métodos laboratoriais também foram avaliadas em função da distribuição uni e bimodal do tamanho médio dos poros. Para isto, utilizou-se a tomografia computadorizada para analisar o comportamento dos poros no solo estudado. O solo onde foi instalada a trincheira constitui-se de areia média a fina argilosa e apresenta a condutividade hidráulica saturada em torno de 9,06.\'10 POT.-6\' m/s. A câmara de Richards foi o método de determinação da curva de retenção que melhor caracterizou o solo quanto à sua porosidade. Os resultados demonstraram que a trincheira de infiltração é eficiente, controlando 100% do volume escoado, mesmo para chuvas com intensidades superiores aos projetos de microdrenagem. Verificou-se também que o modelo de Green-Ampt se ajusta bem ao processo de infiltração horizontal e que a metodologia de dimensionamento proposta contribui de forma eficiente e economicamente eficaz para o dimensionamento de dispositivos de infiltração. / This work assessed the hydraulic behavior of a experimental infiltration trench built at the EESC/USP and proposed a new sizing methodology for infiltration trench, for simulated events. In order to evaluate the hydraulic behavior experimental tests were taken to determine the infiltrated volume. The infiltrated volume was calculated through the difference between the entry volume, obtained by triangular weir, and the volume stored in the trench, determined by level meter. The sizing methodology proposed was based on Green-Ampt model adapted to horizontal infiltration process. The model parameters: water content, pressure head and saturated hydraulic conductivity were determined by Time Domain Reflectometer, retention curve and constant head permeameter, respectively. Retention curves were determined applying two laboratorial methods: Richards camara and filter-paper method, and were evaluate by the unimodal and bimodal distributions of the medium size of the pores. Tomography computerized was used to analyze the behavior of the soil pores. Infiltration trench was installed in a sand soil which presents the saturated hydraulic conductivity around 9,06.\'10 POT.-6\' m/s. The Richards\'s camera was the method that better represented the soil porosity. The results proved the efficiency of the infiltration trench, which controlled 100% of the runoff, even for events with intensities greater than drainage systems design storms. It was also verified that Green-Ampt model has good adjustments to horizontal infiltration process and the sizing methodology proposed is efficient for sizing of infiltration dispositive.

No description available.

No description available.

This thesis presents a theoretical and numerical investigation of silicon-on-insulator trench based passive optical components, bend and splitter, respectively. Compact 90 degree and 105 degree bend and splitter are designed with high index-contrast rib waveguide at wavelength 1550nm and serve as building blocks of splitting network in micro-cantilever biosensing application. The main characteristic of trench based bend and splitter structures is their miniature size and their low radiation loss due to the strong light confinement in high index-contrast systems. Thus large scale, high density optical integrated splitting network becomes possible with the associated advantages of compactness. With FDTD simulation, we show that single-mode trench based bends and splitters exhibit around 16000nm X 16000nm overall size with low loss for different bending angle. Total efficiency is about 92.9% (90 degree bend), 89.3% (105 degree bend), 92% (90 degree splitter) and 84% (90 degree splitter) respectively.

Stormwater management is a problematic area and has during the last 20 years been given an increased attention due to more pollution in the cities. The increased pollution and contaminants in stormwater implicates risks for animals, humans, the ecosystem and receiving recipients. Due to the increased attention, authorities, government and other stakeholders have developed measurements to deal with the problem. Stormwater accommodations and other type of stormwater detainment has been developed with increased modern technology and functionality to fit specific areas where different type of pollutants can vary. Stormwater treatment are necessary because it creates social, environmental and technical advantages combined with protection of ecosystem, increased multifunctionality when combining for example stormwater ponds in nature, parks or urban and rural environment. This report describes seven diverse types of stormwater accommodations systems; rain garden, stormwater ponds, wells, screen basins, infiltration trenches, pipe-/concrete magazine and swales in accordance from Structor Mark Stockholm. From these seven accommodations, three were chosen to be included in Multi Criteria Decision Analysis (MCDA). The purpose of the MCDA was to evaluate four different categories linked to stormwater, which are environment, social, technology and economical categories. These categories are broad concepts; therefore, parameters were developed to narrow down the areas within the concept, from which the area of investigation was founded within. The parameters created for each category are degree of purification for the environmental category, performance and maintenance for the technological category, aesthetical and social benefits for the social category and costs and risk for the economical category. The criteria developed from these parameters are specific topics that was scored from the scale between 0-5, where 0 = insignificant, 1= Low, 2= Moderate, 3= Major, 4=High, 5= Very high. A reference option was also created, considered as “no commercial treatment of stormwater”, only to transport stormwater. This reference option was also referred to as a zero-alternative and is drainage by piping. The scoring was conducted by stakeholders and citizens of Stockholm. The scoring of the three chosen stormwater accommodations and the reference alternative after calculating the mean value and summarize it resulted in that stormwater pond received the highest overall score of 11.9 followed by rain gardens 11.4, infiltration trench 11.3 and drainage by piping 7.3. The stakeholders are influential people that works either with stormwater, layout and planning or maintenance personnel. Citizens of Stockholm provided inputs only in regards of the social aspects. A total of 20 stakeholders were contacted and 5 stakeholders participated in the scoring procedure. Citizens were interviewed on the street; a total of 60 people was asked to participate and 13 people decided to participate in the scoring procedure of the social aspects. Although, the attendance of stakeholders was low, they are still considered important to this project since they provided the scoring of the criteria for each respective category (environment, technology, social and economic). In regards of the low attendance by stakeholders, this resulted in a way that it became hard to distinguish the result between the different stormwater accommodation. Therefore, it was hard to determine which stormwater accommodation that was the best out ofthe ranking provided by the MCDA. A benefit by using MCDA as a tool in this case, gave an indication that the MCDA can work as a framework to decision makers, even though the result in this case became difficult to manage and distinguish between the different stormwater accommodations. Finally, the method, layout and analysis itself can provide means of measurements for stormwater investigations when the purpose is to choose between the best stormwater systems included in the MCDA. Inputs from stakeholders concluded that depending on what type of existing circumstances, there must be a site-specific evaluation to treat every area as a unique area, before deciding what type of stormwater accommodation to apply to that specific location. / Dagvattenhantering är ett problematiskt område som under de senaste 20 åren har fått allt mer uppmärksamhet då mer föroreningar uppdagats i städerna. Den ökande föroreningen av dagvatten tenderar att orsaka en större risk för djur, människor, ekosystem och recipienter dit dagvatten rinner. På grund av uppmärksamheten som dagvattenhanteringen har fått, har myndigheter, regering och andra intressenter utvecklat dagvatten teknologin ytterligare för att skapa en modern dagvattenstrategi för att handskas med problemet. Dagvattenhantering är nödvändigt eftersom den skapar sociala, miljömässiga och tekniska fördelar samt om dagvattensystemen kombineras med funktionalitet så kan detta ge ökat skydd för ekosystemen samt förbättrad hälsa hos befolkningen i städerna. Den här rapporten beskriver sju olika typer av dagvattensystem så som; rain gardens, dagvattendammar, brunnar, skärmbassänger, svackdiken, rör-/betong magasin samt krossdiken på begäran av Structor Mark Stockholm. Utav dessa 7 dagvattensystem, ingick 3 anläggningar i en så kallad multi-criteria decision analysis (MCDA). Syftet med en MCDA är att utvärdera fyra olika kategorier som kan förknippas med dagvattenhantering. Kategorierna är miljömässiga, sociala, tekniska och ekonomiska. Dessa kategorier utger dock ett brett budskap och för att begränsa analysen så skapades parametrar. Dessa parametrar skapas utifrån varje enskild kategori. För den miljömässiga kategorin skapades parametern grad av rening, för den tekniska kategorin skapades parametern prestanda och underhåll, för den sociala kategorin skapades parametern estetiska och sociala fördelar, och slutligen för den ekonomiska kategorin skapades parametern kostnader och risker. Utifrån dessa parametrar skapades sedan kriterier med specifika huvudämnen som kan bedömas enligt en poängskala från 0-5 där 0 = insignificant, 1=Low, 2= Moderate, 3= Major, 4= High, 5= Very high. Tre dagvattensystem inkluderas i MCDA vilket var; rain gardens, dagvattendammar, krossdiken vars syfte är att rena och fördröja dagvatten. Ett referensalternativ skapades också som ävenkallas ”zero-alternative”, vilket anses inte ha någon rening av dagvatten utan är endast ett transportsystem för dagvatten. Detta referensalternativ kallas drainage by piping. Poängsättningen gjordes av intressenter och invånare i Stockholm. Intressenterna är människor som arbetar med dagvattenhantering antingen på planeringsstadiet eller ute i fält som drift och underhålls personal. Invånare i Stockholm bedömde endast den sociala kategorin eftersom det kan sakna kunskap och insyn i det miljömässiga, tekniska och ekonomiska detaljerna. Totalt kontaktades 20 intressenter där 5 personer valde att medverka i MCDA. Invånare i Stockholm intervjuades på stan, totalt frågades ca 60 personer varav 13 personer valde att medverka i poängsättningen. Poängsättningen av de tre valda dagvattensystemen samt referensalternativet, efter beräkningav medelvärdet samt den totala summeringen resulterade i att dagvattendammar fick den hösta poängen 11,9 hamnade rain garden på andra plats med 11,4, krossdike på tredje plats med 11,3 samt referensalternativet på en fjärde plats med 7,3. De tre dagvattensystemen hade ett relativt liknande slutgiltigt resultat. Dock så skilde sig den individuella kategoriska bedömningen av miljömässiga, tekniska, sociala samt ekonomiska aspekten med större varierande resultat. Även om deltagandet av intressenter var relativt lågt, endast 25 % av det kontaktade intressenterna valde att ställa upp, så anses dessa intressenter vara viktiga för det här projektet då de, utifrån deras kunskap, bedömer det uppsatta kriterierna och det är denna bedömning som resultatet baseras på. Resultaten mellan det olika dagvattenanläggningarna som var inkluderade i MCDA var svåra att särskilja, troligtvis beroende på att ingen viktningsmetod användes. Däremot så är en fördel med MCDA som verktyg i det här fallet, att det gav en indikation på att MCDA kan fungera som ett stödjande verktyg för beslutsfattare även om resultatet i det här fallet var svårt att särskilja. Själva metoden, upplägget och analysen kan användas som medel för att avgöra vilken typ av dagvattenanläggning som passar bäst utifrån de kriterier som är uppsatta. Slutligen så gav intressenterna en påvisning att dagvattenanläggningar ska konstrueras så att hänsyn tas till omkringliggande omständigheter, där varje plats ska ansesvara unik. Det krävs en platsspecifik utredning där hänsyn till geologiska, geotekniska,hydrologiska samt infrastrukturella och miljömässiga aspekter bör utredas innan valet av dagvattensystem bestäms.