Cette thèse est dédiée à l'analyse de stabilité des systèmes à pas d'échantillonnage variable et à la commande dynamique de l'échantillonnage. L'objectif est de concevoir des lois d'échantillonnage permettant de réduire la fréquence d'actualisation de la commande par retour d'état, tout en garantissant la stabilité du système.Tout d'abord, un aperçu des récents défis et axes de recherche sur les systèmes échantillonnés est présenté. Ensuite, une nouvelle approche de contrôle dynamique de l'échantillonnage, "échantillonnage dépendant de l'état", est proposée. Elle permet de concevoir hors-ligne un échantillonnage maximal dépendant de l'état défini sur des régions coniques de l'espace d'état, grâce à des LMIs.Plusieurs types de systèmes sont étudiés. Tout d'abord, le cas de système LTI idéal est considéré. La fonction d'échantillonnage est construite au moyen de polytopes convexes et de conditions de stabilité exponentielle de type Lyapunov-Razumikhin. Ensuite, la robustesse vis-à-vis des perturbations est incluse. Plusieurs applications sont proposées: analyse de stabilité robuste vis-à-vis des variations du pas d'échantillonnage, contrôles event-triggered et self-triggered, et échantillonnage dépendant de l'état. Enfin, le cas de système LTI perturbé à retard est traité. La construction de la fonction d'échantillonnage est basée sur des conditions de stabilité L2 et sur un nouveau type de fonctionnelles de Lyapunov-Krasovskii avec des matrices dépendant de l'état. Pour finir, le problème de stabilisation est traité, avec un nouveau contrôleur dont les gains commutent en fonction de l'état du système. Un co-design contrôleur/fonction d'échantillonnage est alors proposé / This PhD thesis is dedicated to the stability analysis of sampled-data systems with time-varying sampling, and to the dynamic control of the sampling instants. The main objective is to design sampling laws that allow for reducing the sampling frequency of state-feedback control for linear systems while ensuring the system's stability.First, an overview of the recent problems, challenges, and research directions regarding sampled-data systems is presented. Then, a novel dynamic sampling control approach, "state-dependent sampling", is proposed. It allows for designing offline a maximal state-dependent sampling map over conic regions of the state space, thanks to LMIs.Various classes of systems are considered throughout the thesis. First, we consider the case of ideal LTI systems, and propose a sampling map design based on the use of polytopic embeddings and Lyapunov-Razumikhin exponential stability conditions. Then, the robustness with respect to exogenous perturbations is included. Different applications are proposed: robust stability analysis with respect to time-varying sampling, as well as event-triggered, self-triggered, and state-dependent sampling control schemes. Finally, a sampling map design is proposed in the case of perturbed LTI systems with delay in the feedback control loop. It is based on L2-stability conditions and a novel type of Lyapunov-Krasovskii functionals with state-dependent matrices. Here, the stabilization issue is considered, and a new controller with gains that switch according to the system's state is presented. A co-design controller gains/sampling map is then proposed

La commande à transmissions événementielles est une approche dans laquelle les instants de transmission sont définis selon un critère dépendant de l'état du système et non plus d'une horloge à l'instar des implantations périodiques. Dans cette thèse, nous nous concentrons sur la synthèse de telles lois de commande par retour de sortie. Les contributions sont les suivantes : (i) nous proposons une méthode de synthèse dite par émulation pour des systèmes non linéaires; (ii) nous présentons une méthode de synthèse jointe de la loi de commande et de la condition de déclenchement pour les systèmes linéaires; (iii) nous nous intéressons au cas de systèmes non linéaires singulièrement perturbés et nous construisons le contrôleur à partir d’approximation de la dynamique lente uniquement. / Event-triggered control is a sampling paradigm in which the sequence of transmission instants is determined based on the violation of a state-dependent criterion and not a time-driven clock. In this thesis, we deal with event-triggered output-based controllers to stabilize classes of nonlinear systems. The contributions of the presented material are threefold: (i) we stabilize a class of nonlinear systems by using an emulation-based approach; (ii) we develop a co-design procedure to simultaneously design the output feedback law and the event-triggering condition for linear systems; (iii) we propose stabilizing event-triggered controllers for nonlinear systems whose dynamics have two-time scales (in particular, we only rely on the knowledge of an approximate model of the slow dynamics)

Tesis por compendio / [ES] Con esta tesis se pretende dar solución a algunos de los problemas más habituales que aparecen en los Sistemas de control basados en red (NCS) como son los retardos variables en el tiempo, las pérdidas y el desorden de paquetes, y la restricción de ancho de banda y de recursos computacionales y energéticos de los dispositivos que forman parte del sistema de control. Para ello se ha planteado la integración de técnicas de control multifrecuencial, de control basado en paquetes, de control basado en predictor y de control basado en eventos. Los diseños de control realizados se han simulado utilizando Matlab-Simulink y Truetime, se ha analizado su estabilidad mediante LMIs y QFT, y se han validado experimentalmente en un péndulo invertido, un robot cartesiano 3D y en robots móviles de bajo coste. El artículo 1 aborda el control basado en eventos, el cual minimiza el ancho de banda consumido en el NCS mediante un control basado en eventos periódicos y presenta un método para obtener sus parámetros óptimos para el sistema específico en que se utilice. Los artículos 2, 4 y 6 añaden el control basado en paquetes, así como el control multifrecuencia, que aborda problemas de falta de datos por bajo uso del sensor y los retardos, pérdidas y desórdenes de paquetes en la red. También afrontan, mediante tecnicas de predicción basadas en un filtro de Kalman multifrecuencia variable en el tiempo, los problemas de ruido y perturbaciones, así como la observación de los estados completos del sistema. El artículo 7 hace frente a un modelo no lineal que utiliza las anteriores soluciones junto con un filtro de Kalman extendido para presentar otro tipo de estructura para un vehículo autónomo que, gracias a la información futura obtenida mediante estas técnicas, puede realizar de forma remota tareas de alto nivel como es la toma de decisiones y la monitorización de variables. Los artículos 3 y 5, presentan una forma de obtener y analizar la respuesta en frecuencia de sistemas SISO multifrecuencia y estudian su comportamiento ante ciertas incertidumbres o problemas en la red haciendo uso de procedimientos QFT. / [CA] Amb aquesta tesi es pretén donar solució a alguns dels problemes més habituals que apareixen als Sistemes de Control Basats en xarxa (NCS) com son els retards d'accés i transferència variables en el temps, les pèrdues y desordenament de paquets, i la restricció d'ampli de banda així com de recursos computacionals i energètics dels dispositius que foment part del sistema de control. Per tal de resoldre'ls s'ha plantejat la integració de tècniques de control multifreqüencial, de control basat en paquets, de control basat en predictor i de control basat en events. Els dissenys de control realitzats s'han simulat fent ús de Matlab-Simulink i de TrueTime, s'ha analitzat la seua estabilitat mitjançant LMIs i QFT, i s'han validat experimentalment en un pèndul invertit, un robot cartesià 3D i en robots mòbils de baix cost. L'article 1 aborda el control basat en events, el qual minimitza l'ampli de banda consumit a l'NCS mitjançant un control basat en events periòdics i presenta un mètode per a obtindré els seus paràmetres òptims per al sistema específic en el qual s'utilitza. Els articles 2, 4 i 6 afegeixen el control basat en paquets, així com el control multifreqüència, que aborda problemes de falta de dades per el baix us del sensor i els retards, pèrdues i desordre de paquets en la xarxa. També afronten, mitjançant tècniques de predicció basades en un filtre de Kalman multifreqüència variable en el temps. Els problemes de soroll i pertorbacions, així com la observació dels estats complets del sistema. L'article 7 fa referència a un model no lineal que utilitza les anteriors solucions junt a un filtre de Kalman estès per a presentar altre tipus d'estructura per a un vehicle autònom que, gracies a la informació futura obtinguda mitjançant aquestes tècniques, pot realitzar de manera remota tasques d'alt nivell com son la presa de decisions i la monitorització de variables. Els articles 3 y 5 presenten la manera d'obtindre i analitzar la resposta en frequencia de sistemes SISO multifreqüència i estudien el seu comportament front a certes incerteses o problemes en la xarxa fent us de procediments QFT. / [EN] This thesis attempts to solve some of the most frequent issues that appear in Networked Control Systems (NCS), such as time-varying delays, packet losses and packet disorders and the bandwidth limitation. Other frequent problems are scarce computational and energy resources of the local system devices. Thus, it is proposed to integrate multirate control, packet-based control, predictor-based control and event-based control techniques. The control designs have been simulated using Matlab-Simulink and Truetime, the stability has been analysed by LMIs and QFT, and the experimental validation has been done on an inverted pendulum, a 3D cartesian robot and in low-cost mobile robots. Paper 1 addresses event-based control, which minimizes the bandwidth consumed in NCS through a periodic event-triggered control and presents a method to obtain the optimal parameters for the specific system used. Papers 2, 4 and 6 include packet-based control and multirate control, addressing problems such as network delays, packet dropouts and packet disorders, and the scarce data due to low sensor usage in order to save battery in sensing tasks and transmissions of the sensed data. Also addressed, is how despite the existence of measurement noise and disturbances, time-varying dual-rate Kalman filter based prediction techniques observe the complete state of the system. Paper 7 tackles a non-linear model that uses all the previous solutions together with an extended Kalman filter to present another type of structure for an autonomous vehicle that, due to future information obtained through these techniques, can remotely carry out high level tasks, such as decision making and monitoring of variables. Papers 3 and 5, present a method for obtaining and analyzing the SISO dual-rate frequency response and using QFT procedures to study its behavior when faced with specific uncertainties or network problems. / This work was supported by the Spanish Ministerio de Economía y Competitividad under Grant referenced TEC2012-31506. / Alcaina Acosta, JJ. (2020). Design and implementation of event-based multi-rate controllers for networked control systems [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/159884 / TESIS / Compendio

Low-power wireless technology is a part and parcel of our daily life, shaping the way in which we behave, interact, and more generally live. The ubiquity of cheap, tiny, battery-powered devices augmented with sensing, actuation, and wireless communication capabilities has given rise to a ``smart" society, where people, machines, and objects are seamlessly interconnected, among themselves and with the environment. Behind the scenes, low-power wireless protocols are what enables and rules all interactions, organising these embedded devices into wireless networks, and orchestrating their communications. The recent years have witnessed a persistent increase in the pervasiveness and impact of low-power wireless. After having spawned a wide spectrum of powerful applications in the consumer domain, low-power wireless solutions are extending their influence over the industrial context, where their adoption as part of feedback control loops is envisioned to revolutionise the production process, paving the way for the Fourth Industrial Revolution. However, as the scale and relevance of low-power wireless systems continue to grow, so do the challenges posed to the communication substrates, required to satisfy ever more strict requirements in terms of reliability, responsiveness, and energy consumption. Harmonising these conflicting demands is far beyond what is enabled by current network stacks and control architectures; the need to timely bridge this gap has spurred a new wave of interest in low-power wireless networking, and directly motivated our work. In this thesis, we take on this challenge with a main conceptual and technical tool: concurrent transmissions (CTX), a technique that, by enforcing nodes to transmit concurrently, has been shown to unlock unprecedented fast, reliable, and energy efficient multi-hop communications in low-power wireless networks, opening new opportunities for protocol design. We first direct our research endeavour towards industrial applications, focusing on the popular IEEE 802.15.4 narrowband PHY layer, and advance the state of the art along two different directions: interference resilience and aperiodic wireless control. We tackle radio-frequency noise by extensively analysing, for the first time, the dependability of CTX under different types, intensities, and distributions of reproducible interference patterns, and by devising techniques to push it further. Specifically, we concentrate on CRYSTAL, a recently proposed communication protocol that relies on CTX to rapidly and dependably collect aperiodic traffic. By integrating channel hopping and noise detection in the protocol operation, we provide a novel communication stack capable of supporting aperiodic transmissions with near-perfect reliability and a per-mille radio duty cycle despite harsh external interference. These results lay the ground towards the exploitation of CTX for aperiodic wireless control; we explore this research direction by co-designing the Wireless Control Bus (WCB), our second contribution. WCB is a clean-slate CTX-based communication stack tailored to event-triggered control (ETC), an aperiodic control strategy holding the capability to significantly improve the efficiency of wireless control systems, but whose real-world impact has been hampered by the lack of appropriate networking support. Operating in conjunction with ETC, WCB timely and dynamically adapts the network operation to the control demands, unlocking an order-of-magnitude reduction in energy costs w.r.t. traditional periodic approaches while retaining the same control performance, therefore unleashing and concretely demonstrating the true ETC potential for the first time. Nevertheless, low-power wireless communications are rapidly evolving, and new radios striking novel trade-offs are emerging. Among these, in the second part of the thesis we focus on ultra-wideband (UWB). By providing hitherto missing networking primitives for multi-hop dissemination and collection over UWB, we shed light on the communication potentialities opened up by the high data throughput, clock precision, and noise resilience offered by this technology. Specifically, as a third contribution, we demonstrate that CTX not only can be successfully exploited for multi-hop UWB communications but, once embodied in a full-fledged system, provide reliability and energy performance akin to narrowband. Furthermore, the higher data rate and clock resolution of UWB chips unlock up to 80% latency reduction w.r.t. narrowband CTX, along with orders-of-magnitude improvements in network-wide time synchronization. These results showcase how UWB CTX could significantly benefit a multitude of applications, notably including low-power wireless control. With WEAVER, our last contribution, we make an additional step towards this direction, by supporting the key functionality of data collection with an ultra-fast convergecast stack for UWB. Challenging the internal mechanics of CTX, WEAVER interleaves data and acknowledgements flows in a single, self-terminating network-wide flood, enabling the concurrent collection of different packets from multiple senders with unprecedented latency, reliability, and energy efficiency. Overall, this thesis pushes forward the applicability and performance of low-power wireless, by contributing techniques and protocols to enhance the dependability, timeliness, energy efficiency, and interference resilience of this technology. Our research is characterized by a strong experimental slant, where the design of the systems we propose meets the reality of testbed experiments and evaluation. Via our open-source implementations, researchers and practitioners can directly use, extend, and build upon our contributions, fostering future work and research on the topic.

L’objectif principal de cette thèse est d’étudier le problème du contrôle de suivi distribué pour les systèmes de formation de multi-robots à contrainte non holonomique. Ce contrôle vise à entrainer une équipe de robots mobile de type monocycle pour former une configuration de formation désirée avec son centroïde se déplaçant avec une autre trajectoire de référence dynamique et pouvant être spécifié par le leader virtuel ou humain. Le problème du contrôle de suivi a été résolu au cours de cette thèse en développant divers contrôleurs distribués pratiques avec la considération d’un taux de convergence plus rapide, une précision de contrôle plus élevée, une robustesse plus forte, une estimation du temps de convergence explicite et indépendante et moins de coût de communication et de consommation d’énergie. Dans la première partie de la thèse nous étudions d’abord au niveau du chapitre 2 la stabilité à temps fini pour les systèmes de formation de multi-robots. Une nouvelle classe de contrôleur à temps fini est proposée dans le chapitre 3, également appelé contrôleur à temps fixe. Nous étudions les systèmes dynamiques de suivi de formation de multi-robots non holonomiques dans le chapitre 4. Dans la deuxième partie, nous étudions d'abord le mécanisme de communication et de contrôle déclenché par l'événement sur les systèmes de suivi de la formation de multi-robots non-holonomes au chapitre 5. De plus, afin de développer un schéma d'implémentation numérique, nous proposons une autre classe de contrôleurs périodiques déclenchés par un événement basé sur un observateur à temps fixe dans le chapitre 6. / The main aim of this thesis is to study the distributed tracking control problem for the multi-robot formation systems with nonholonomic constraint, of which the control objective it to drive a team of unicycle-type mobile robots to form one desired formation configuration with its centroid moving along with another dynamic reference trajectory, which can be specified by the virtual leader or human. We consider several problems in this point, ranging from finite-time stability andfixed-time stability, event-triggered communication and control mechanism, kinematics and dynamics, continuous-time systems and hybrid systems. The tracking control problem has been solved in this thesis via developing diverse practical distributed controller with the consideration of faster convergence rate, higher control accuracy, stronger robustness, explicit and independent convergence time estimate, less communication cost and energy consumption.In the first part of the thesis, we first study the finite-time stability for the multi-robot formation systems in Chapter 2. To improve the pior results, a novel class of finite-time controller is further proposed in Chapter 3, which is also called fixed-time controller. The dynamics of nonholonomic multi-robot formation systems is considered in Chapter 4. In the second part, we first investigate the event-triggered communication and control mechanism on the nonholonomic multi-robot formation tracking systems in Chapter 5. Moreover, in order to develop a digital implement scheme, we propose another class of periodic event-triggered controller based on fixed-time observer in Chapter 6.