The anion-intercalation chemistries of graphite have the potential to construct batteries with promising energy and power breakthroughs. Here, we report the use of an ultrathin, positively charged two-dimensional poly(pyridinium salt) membrane (C2DP) as the graphite electrode skin to overcome the critical durability problem. Large-area C2DP enables the conformal coating on the graphite electrode, remarkably alleviating the electrolyte. Meanwhile, the dense face-on oriented single crystals with ultrathin thickness and cationic backbones allow C2DP with high anion-transport capability and selectivity. Such desirable anion-transport properties of C2DP prevent the cation/solvent co-intercalation into the graphite electrode and suppress the consequent structure collapse. An impressive PF6−-intercalation durability is demonstrated for the C2DP-covered graphite electrode, with capacity retention of 92.8% after 1000 cycles at 1 C and Coulombic efficiencies of > 99%. The feasibility of constructing artificial ion-regulating electrode skins with precisely customized two-dimensional polymers offers viable means to promote problematic battery chemistries.

<p dir="ltr">Creating synthetic materials that mimic native tissue is an overarching goal in tissue engineering and regenerative medicine. It is essential to embed molecular-resolution chemical patterning into soft synthetic polymers to achieve this. Even though fundamental principles from surface science offer broad control over the position of even individual atoms on a pristine surface, this degree of control remains restricted to two-dimensional hard crystalline materials under particular environmental conditions that are incompatible with life. Therefore, developing strategies to translate these principles into soft, amorphous interfaces is challenging<i>. </i>This will lead to the development of <i>nanopatterned soft materials</i> that closely resemble native tissue. Popular approaches in materials science fail to produce such <i>high-resolution polymers</i>.</p><p dir="ltr">Hydrogels are soft, three-dimensional networks that can hold large amounts of an aqueous solvent while retaining their structure. These materials have applicability in contexts where polymer materials must interface with biology (e.g., drug delivery, biosensing, tissue engineering, and regenerative medicine) as one can easily tune their mechanical, chemical, and biological properties. However, the main limitation of these materials is that the hydrogel network is amorphous, with substantial variability in mesh size up to the micron-scale. This limits their application when highly structured interactions with biomolecules, typically at sub-10 nm scales, are required. This dissertation shows a strategy to generate 1 nm-wide ordered patterns of functional groups on polyacrylamide (PAAm) hydrogel surfaces. When 1 nm-wide linear patterns are transferred to PAAm, patterning specific biological polyelectrolyte interactions at the hydrogel surface is possible. This represents a first step towards developing robust methods for nanopattern hydrogels at the proposed resolution.</p><p dir="ltr">One last subject this thesis dissertation seeks to explore is the extension of chemical patterning to a dynamic range of scales to adapt this technological advancement to industrial setups. Enabling the practical applicability of nanopatterned soft materials in macroscopic contexts (e.g., synthetic tissue development, wearable electronics, etc). However, extending this degree of control to a high throughput process applicable to heterogeneous interfaces remains a challenge. We demonstrated a scalable inkjet printing method to produce functional hierarchical patterns on two-dimensional crystalline substrates, which can be transferred to hydrogels. Finally, we studied the specific biosensing capabilities of these micro-patterned surfaces.</p>

Cette thèse est consacrée à la production de matériaux 2D en phase liquide, en utilisant des approches pouvant permettre la production en masse de graphène et de matériaux apparentés. Notre objectif est de surmonter certains problèmes critiques pour le traitement et l'utilisation pratique des encres à base de matériaux 2D et de fournir une compréhension approfondie de la relation structure-propriétés dans ces matériaux, constituant des étapes obligatoires pour leurs applications futures. Cette thèse porte principalement sur l'UILPE et l'exfoliation électrochimique du graphène et du disulfure de molybdène (MoS2), qui ont été choisis comme matériaux prototypes à 2 dimensions. Les approches synthétiques sont combinées à une caractérisation physico-chimique des matériaux produits, à l'aide de techniques telles que l'AFM, la microscopie électronique, la spectroscopie XPS et Raman, ainsi qu'à une caractérisation électrique. Des applications dans le domaine de la détection et de l'électronique ont été explorées et ont permis de démontrer que des approches d'exfoliation en phase liquide pouvaient être utilisées pour obtenir un contrôle précis des propriétés des matériaux 2D ouvrant la voie à leur intégration en tant que matériaux actifs dans de nouveaux dispositifs multifonctionnels. / This thesis is devoted to the production in liquid-phase of two-dimensional materials, by using approaches that may enable mass production of graphene and related materials. We aim to overcome some issues that are critical for the processing and practical use of 2D materials-inks and to provide a deep understanding of the structure-properties relationship in such materials being mandatory steps toward their future applications. This thesis mainly focuses on ultrasound-induced liquid-phase exfoliation and electrochemical exfoliation of graphene and molybdenum disulfide, which have been chosen as prototypical 2D materials. The synthetic approaches have been combined with a multiscale physico-chemical and electrical characterization of the produced materials, by employing techniques such as AFM, XPS and Raman spectroscopy. Applications in the field of sensing and electronics have been explored and allowed to demonstrate that liquid-phase exfoliation approaches can be conveniently employed to achieve a fine control on the properties of 2D materials paving the way to their integration as active materials in novel multifunctional devices.

This dissertation works out the vibrational properties of epitaxial silicene, which was discovered by Vogt et al. in 2012 by the epitaxial synthesis on the silver substrate. Its two-dimensional (2D) character is modified in comparison to the free-standing silicene due to its epitaxial nature, since the underlying substrate alters the physical properties of silicene as a result of the strong hybridization of the electronic levels of the substrate and adlayer. The growth of silicene layers is complicated by the sensitivity of the Si structures to the experimental conditions, mainly temperature, resulting in the formation of several seemingly different surface reconstructions. Another Si structure appears on the Ag surface at a supramonolayer coverage. The Raman spectroscopy was utilized to understand the relation between different Si structures and reveal their origin as well as to investigate the phonon-related physical properties of two-dimensional Si sheets. The central core of this work is the growth and characterization of these 2D silicene monolayers on the Ag (111) surface as well as the formation of silicene multilayer structures. The characterization of these materials was performed using in situ surface-sensitive measurement methods such as Raman spectroscopy and low-energy electron diffraction under ultra-high vacuum conditions due to high chemical reactivity of epitaxial silicene. Additional characterization was done ex situ by means of scanning force microscopy. The experimentally determined spectral signature of the prototypical epitaxial (3x3)/(4x4) silicene structure was confirmed by ab initio calculations, in collaboration with theory groups. The Raman signatures of the other 2D and 3D Si phases on Ag (111) were determined which allowed us to provide a clear picture of their formation depending on the preparation conditions. The monitoring of the silicene multi-layer growth yielded the vibrational signature of the top layer, reconstructed in a (√3x√3) fashion. It was compared to the inverse, (√3x√3)-Ag/Si(111), system showing the vast amount of similarities, which suggest that the (√3x√3) reconstruction belong to the silver layer. The chemical and physical properties of this surface structure additionally strengthen this equivalence. The possibility of functionalization of epitaxial silicene was demonstrated via exposure to the atomic hydrogen under UHV conditions. The adsorbed hydrogen covalently bonds to the silicene lattice modifying it and reducing its symmetry. As shown by Raman spectroscopy, such modification can be reversed by thermal desorption of hydrogen. The excitation-dependent Raman measurements also suggest the change of the electronic properties of epitaxial silicene upon hydrogenation suggesting that its originally semi-metallic character is modified into a semiconducting one. / Die experimentellen Forschungsarbeiten zum Thema Silicen basieren auf den 2012 von Vogt et al. durchgeführten Untersuchungen zu dessen Synthese auf Silbersubstraten. Diese Untersuchungen lieferten die Grundlage, auf der zweidimensionales (2D) epitaktisches Silicen sowie weitere 2D Materialien untersucht werden konnten. In den anfänglichen Arbeiten konnte dabei gezeigt werden, dass sich die Eigenschaften von epitaktischem Silicen gegenüber den theoretischen Vorhersagen von frei-stehendem Silicen unterscheiden. Darüber hinaus verkomplizieren sich die experimentellen Untersuchungen dieses 2D Materials, da auf dem Ag(111) Wachstumssubstrat sechs verschiedene 2D Si Polytypen existieren. Eine detaillierte Darstellung dieser Untersuchungen findet sich in dem einführenden Kapitel der vorliegen Promotionsschrift. Der zentrale Kern dieser Arbeit beschäftigt sich mit dem Wachstum und der Charakterisierung dieser 2D Silicen Monolagen auf Ag(111) Oberflächen sowie der Bildung von Silicen- Multilagen Strukturen. Die Charakterisierung dieser Materialien wurde in situ mit oberflächenempfindlichen Messmethoden wie der Raman Spektroskopie und der niederenergetischen Elektronenbeugung unter Ultrahochvakuum-Bedingungen durchgeführt. Eine zusätzliche Charakterisierung erfolgte ex situ mittels Raster-KraftMikroskopie. Die experimentell bestimmte spektrale Raman-Signatur der prototypischen epitaktischen (3x3)/(4x4) Silicene Struktur wurde durch ab initio Rechnungen, in Zusammenarbeit mit Theoriegruppen, bestätigt. Durch diesen Vergleich wir die zweidimensionale Natur der epitaktischen Silicen-Schichten vollständig bestätigt, wodurch andere mögliche Interpretationen ausgeschlossen werden können. Darüber hinaus wurden die Ramans-Signaturen der weiteren 2D und 3D Siliziumphasen auf Ag(111) bestimmt, wodurch sich ein klares Bild der Bildung dieser Strukturen in Abhängigkeit von den Präparationsbedingungen ergibt. Um die Möglichkeit der Funktionalisierung von Silicen und der weiteren 2D Si Strukturen zu testen, wurden diese unter UHV Bedingungen atomarem Wasserstoff ausgesetzt. Durch die Bindung zu den Wasserstoffamen wird die kristalline Struktur der Silicen-Schichten modifiziert und die Symmetrie reduziert, was sich deutlich in der spektralen Raman-Signatur zeigt. Wie mittels Raman Spektroskopie gezeigt werden konnte, kann diese Modifikation durch thermische Desorption des Wasserstoffs rückgängig gemacht werden, ist also reversibel. Raman Messungen mit verschiedenen Anregungswellenlängen deuten darüber hinaus auf die Änderung der elektronischen Eigenschaften der Silicen-Schichten durch die Hydrierung hin. Der ursprüngliche halbmetallische Charakter der epitaktischen Silicen-Schicht geht möglicherweise in einen halbleitenden Zustand über. Das Wachstum von Silicen Multilagen wurde ebenfalls mit in situ Ramanspektroskopie verfolgt. Die sich dabei ergebene Raman-Signatur wurde mit der Raman-Signatur von Ag terminiertem Si(111) verglichen. Hier zeigen sich große Ähnlichkeiten, die auf eine ähnliche atomare Struktur hindeuten und zeigen, dass Ag Atome für die Ausbildung der Oberflächenstruktur während des Wachstums der Si-Lagen verantwortlich sind. Die chemischen und physikalischen Eigenschaften dieser Struktur bestärken zusätzlich diese Äquivalenz.

The thesis deals with study of thin layers of transition metal dichalcogenides, especially of molybdenum disulfide. Nanostructures were fabricated on two-dimensional crystals of MoS2 and WSe2. Within followed analysis attention was paid to the photoluminescence properties. In the thesis transition metal dichalcogenides are reviewed and description of the modified process of preparation by micromechanical exfoliation is given.

Microporous membranes act as selective barriers and play an important role in industrial gas separation and water purification. The permeability of such membranes is inversely proportional to their thickness. Synthetic two-dimensional materials (2DMs), with a thickness of one to a few atoms or monomer-units are ideal candidates for developing separation membranes. In this Progress Report, we present groundbreaking advances in the design, synthesis, processing, and application of 2DMs for gas and ion separations, as well as water desalination. After the introduction in Section 1, this report describes the syntheses, structures, and mechanical properties of 2DMs in Section 2. In Section 3, we will discuss the established methods for processing 2DMs into selective permeation membranes and address the separation mechanism and their performances. Finally, current challenges and emerging research directions, which need to be addressed for developing next generation separation membranes, are summarized in the Conclusion and Perspective.

No description available.

No description available.

The two-dimensional material graphene possesses many impressive properties such asextraordinary carrier mobility, mechanical stiffness and optical transmittance. However,the properties of pristine graphene do not always complement the requirements of applications. Of particular interest, a band gap is needed for electronic logic devices. Recent research shows that using few-layer hexagonal boron nitride as a substrate for graphene-based electronic devices can open a band gap in graphene. Also, introducing impurities such as hydrogen atoms, transition metals or silicon atoms on or within graphene can control the electronic properties according to recent studies. Furthermore, ion irradiation is an alternative option to tailor the properties of graphene by introducing defects. In this thesis, pristine, impure or defective graphene and few-layer boron nitride were characterised by scanning transmission electron microscopy (STEM) and electron energy loss (EEL) spectroscopy. Through STEM and EEL spectroscopy, lattice structures and electronic properties of these two-dimensional materials could be investigated at the atomic scale. This thesis focuses on the frontier studies of theoretical and experimental EEL spectroscopy of graphene and few-layer boron nitride with impurities. In the EEL spectra of pristine graphene and boron nitride two prominent peaks were observed, which are attributed to the plasmon excitations of π- and π+σ-electrons. By introducing impurities such as hydrogen adatoms on graphene and substitutional oxygen and carbon atoms within single-layer boron nitride, our experimental and simulated EEL spectra show that their π-plasmon peaks are modified. The concentrations of these impurities were then evaluated via EEL spectra and atomic-resolution images. If other impurities, such as various transition metals and silicon atoms, are introduced on or within single-layer graphene, our simulated EEL spectra demonstrate that the geometry of these impurity clusters affects the π-plasmon peak in graphene and some impurities even enhance it. Finally, experiments on in-situ transmission electron microscopy and ex-situ STEM and Raman spectroscopy were conducted to investigate ion irradiated graphene. Many topological defects were, for the first time, observed in atomic-resolution STEM images of ion irradiated graphene. Simulated EEL spectra of defective graphene are also reported, which suggests that corrugations and dangling bonds in defects can modify out-of-plane EEL spectra and introduce intraband transitions, respectively.

This dissertation works out the vibrational properties of epitaxial silicene, which was discovered by Vogt et al. in 2012 by the epitaxial synthesis on the silver substrate. Its two-dimensional (2D) character is modified in comparison to the free-standing silicene due to its epitaxial nature, since the underlying substrate alters the physical properties of silicene as a result of the strong hybridization of the electronic levels of the substrate and adlayer. The growth of silicene layers is complicated by the sensitivity of the Si structures to the experimental conditions, mainly temperature, resulting in the formation of several seemingly different surface reconstructions. Another Si structure appears on the Ag surface at a supramonolayer coverage. The Raman spectroscopy was utilized to understand the relation between different Si structures and reveal their origin as well as to investigate the phonon-related physical properties of two-dimensional Si sheets. The central core of this work is the growth and characterization of these 2D silicene monolayers on the Ag (111) surface as well as the formation of silicene multilayer structures. The characterization of these materials was performed using in situ surface-sensitive measurement methods such as Raman spectroscopy and low-energy electron diffraction under ultra-high vacuum conditions due to high chemical reactivity of epitaxial silicene. Additional characterization was done ex situ by means of scanning force microscopy. The experimentally determined spectral signature of the prototypical epitaxial (3x3)/(4x4) silicene structure was confirmed by ab initio calculations, in collaboration with theory groups. The Raman signatures of the other 2D and 3D Si phases on Ag (111) were determined which allowed us to provide a clear picture of their formation depending on the preparation conditions. The monitoring of the silicene multi-layer growth yielded the vibrational signature of the top layer, reconstructed in a (√3x√3) fashion. It was compared to the inverse, (√3x√3)-Ag/Si(111), system showing the vast amount of similarities, which suggest that the (√3x√3) reconstruction belong to the silver layer. The chemical and physical properties of this surface structure additionally strengthen this equivalence. The possibility of functionalization of epitaxial silicene was demonstrated via exposure to the atomic hydrogen under UHV conditions. The adsorbed hydrogen covalently bonds to the silicene lattice modifying it and reducing its symmetry. As shown by Raman spectroscopy, such modification can be reversed by thermal desorption of hydrogen. The excitation-dependent Raman measurements also suggest the change of the electronic properties of epitaxial silicene upon hydrogenation suggesting that its originally semi-metallic character is modified into a semiconducting one. / Die experimentellen Forschungsarbeiten zum Thema Silicen basieren auf den 2012 von Vogt et al. durchgeführten Untersuchungen zu dessen Synthese auf Silbersubstraten. Diese Untersuchungen lieferten die Grundlage, auf der zweidimensionales (2D) epitaktisches Silicen sowie weitere 2D Materialien untersucht werden konnten. In den anfänglichen Arbeiten konnte dabei gezeigt werden, dass sich die Eigenschaften von epitaktischem Silicen gegenüber den theoretischen Vorhersagen von frei-stehendem Silicen unterscheiden. Darüber hinaus verkomplizieren sich die experimentellen Untersuchungen dieses 2D Materials, da auf dem Ag(111) Wachstumssubstrat sechs verschiedene 2D Si Polytypen existieren. Eine detaillierte Darstellung dieser Untersuchungen findet sich in dem einführenden Kapitel der vorliegen Promotionsschrift. Der zentrale Kern dieser Arbeit beschäftigt sich mit dem Wachstum und der Charakterisierung dieser 2D Silicen Monolagen auf Ag(111) Oberflächen sowie der Bildung von Silicen- Multilagen Strukturen. Die Charakterisierung dieser Materialien wurde in situ mit oberflächenempfindlichen Messmethoden wie der Raman Spektroskopie und der niederenergetischen Elektronenbeugung unter Ultrahochvakuum-Bedingungen durchgeführt. Eine zusätzliche Charakterisierung erfolgte ex situ mittels Raster-KraftMikroskopie. Die experimentell bestimmte spektrale Raman-Signatur der prototypischen epitaktischen (3x3)/(4x4) Silicene Struktur wurde durch ab initio Rechnungen, in Zusammenarbeit mit Theoriegruppen, bestätigt. Durch diesen Vergleich wir die zweidimensionale Natur der epitaktischen Silicen-Schichten vollständig bestätigt, wodurch andere mögliche Interpretationen ausgeschlossen werden können. Darüber hinaus wurden die Ramans-Signaturen der weiteren 2D und 3D Siliziumphasen auf Ag(111) bestimmt, wodurch sich ein klares Bild der Bildung dieser Strukturen in Abhängigkeit von den Präparationsbedingungen ergibt. Um die Möglichkeit der Funktionalisierung von Silicen und der weiteren 2D Si Strukturen zu testen, wurden diese unter UHV Bedingungen atomarem Wasserstoff ausgesetzt. Durch die Bindung zu den Wasserstoffamen wird die kristalline Struktur der Silicen-Schichten modifiziert und die Symmetrie reduziert, was sich deutlich in der spektralen Raman-Signatur zeigt. Wie mittels Raman Spektroskopie gezeigt werden konnte, kann diese Modifikation durch thermische Desorption des Wasserstoffs rückgängig gemacht werden, ist also reversibel. Raman Messungen mit verschiedenen Anregungswellenlängen deuten darüber hinaus auf die Änderung der elektronischen Eigenschaften der Silicen-Schichten durch die Hydrierung hin. Der ursprüngliche halbmetallische Charakter der epitaktischen Silicen-Schicht geht möglicherweise in einen halbleitenden Zustand über. Das Wachstum von Silicen Multilagen wurde ebenfalls mit in situ Ramanspektroskopie verfolgt. Die sich dabei ergebene Raman-Signatur wurde mit der Raman-Signatur von Ag terminiertem Si(111) verglichen. Hier zeigen sich große Ähnlichkeiten, die auf eine ähnliche atomare Struktur hindeuten und zeigen, dass Ag Atome für die Ausbildung der Oberflächenstruktur während des Wachstums der Si-Lagen verantwortlich sind. Die chemischen und physikalischen Eigenschaften dieser Struktur bestärken zusätzlich diese Äquivalenz.