1 |
Unsteady Effects of a Pulsed Blowing System on an Endwall VortexDonovan, Molly Hope 04 June 2019 (has links)
No description available.
|
2 |
Exploring Fundamental Turbulent Physics Using Direct Numerical SimulationNilsson, Michael A 01 January 2009 (has links) (PDF)
It has been shown in many studies that turbulent flows are highly dependent on their initial conditions. This thesis explores turbulent flow using direct numerical simulation (DNS) in a variety of situations, and culminates in the development of physically realizable initial conditions. The reaction of isotropic homogeneous turbulent flow to the instantaneous insertion of a wall is investigated using two-point correlations. A model with which to predict the behavior of the two-point correlations is also proposed. The proposed model utilizes a reflection technique that with a linear operation, it accurately predicts the behavior of the non-linear two point correlations. The model works exceedingly well for correlations involving wall-perpendicular velocities, but does not predict correlations involving only wall-parallel velocities as well. A vorticity approach is covered, in an effort to highlight which parts of the correlation decomposition are important to the prediction of the correlations after wall imposition. The vorticity study also helps highlight why the proposed linear model predicts the flow. The impact of the initial conditions on axisymmetric contraction flow of turbulent flow is examined, and as a consequence new initial conditions are developed based off of a physically realizable flow condition. The development of the new-initial conditions and the resulting fields are covered, as well as a study on the value of the turbulent decay exponent associated with decay of isotropic turbulent velocity fields.
|
3 |
Combining the vortex-in-cell and parallel fast multipole methods for efficient domain decomposition simulations : DNS and LES approachesCocle, Roger 24 August 2007 (has links)
This thesis is concerned with the numerical simulation of high Reynolds number, three-dimensional, incompressible flows in open domains. Many problems treated in Computational Fluid Dynamics (CFD) occur in free space: e.g., external aerodynamics past vehicles, bluff bodies or aircraft; shear flows such as shear layers or jets. In observing all these flows, we can remark that they are often unsteady, appear chaotic with the presence of a large range of eddies, and are mainly dominated by convection. For years, it was shown that Lagrangian Vortex Element Methods (VEM) are particularly well appropriate for simulating such flows. In VEM, two approaches are classically used for solving the Poisson equation. The first one is the Biot-Savart approach where the Poisson equation is solved using the Green's function approach. The unbounded domain is thus implicitly taken into account. In that case, Parallel Fast Multipole (PFM) solvers are usually used. The second approach is the Vortex-In-Cell (VIC) method where the Poisson equation is solved on a grid using fast grid solvers. This requires to impose boundary conditions or to assume periodicity. An important difference is that fast grid solvers are much faster than fast multipole solvers. We here combine these two approaches by taking the advantages of each one and, eventually, we obtain an efficient VIC-PFM method to solve incompressible flows in open domain. The major interest of this combination is its computational efficiency: compared to the PFM solver used alone, the VIC-PFM combination is 15 to 20 times faster. The second major advantage is the possibility to run Large Eddy Simulations (LES) at high Reynolds number. Indeed, as a part of the operations are done in an Eulerian way (i.e. on the VIC grid), all the existing subgrid scale (SGS) models used in classical Eulerian codes, including the recent "multiscale" models, can be easily implemented.
|
4 |
Combining the vortex-in-cell and parallel fast multipole methods for efficient domain decomposition simulations : DNS and LES approachesCocle, Roger 24 August 2007 (has links)
This thesis is concerned with the numerical simulation of high Reynolds number, three-dimensional, incompressible flows in open domains. Many problems treated in Computational Fluid Dynamics (CFD) occur in free space: e.g., external aerodynamics past vehicles, bluff bodies or aircraft; shear flows such as shear layers or jets. In observing all these flows, we can remark that they are often unsteady, appear chaotic with the presence of a large range of eddies, and are mainly dominated by convection. For years, it was shown that Lagrangian Vortex Element Methods (VEM) are particularly well appropriate for simulating such flows. In VEM, two approaches are classically used for solving the Poisson equation. The first one is the Biot-Savart approach where the Poisson equation is solved using the Green's function approach. The unbounded domain is thus implicitly taken into account. In that case, Parallel Fast Multipole (PFM) solvers are usually used. The second approach is the Vortex-In-Cell (VIC) method where the Poisson equation is solved on a grid using fast grid solvers. This requires to impose boundary conditions or to assume periodicity. An important difference is that fast grid solvers are much faster than fast multipole solvers. We here combine these two approaches by taking the advantages of each one and, eventually, we obtain an efficient VIC-PFM method to solve incompressible flows in open domain. The major interest of this combination is its computational efficiency: compared to the PFM solver used alone, the VIC-PFM combination is 15 to 20 times faster. The second major advantage is the possibility to run Large Eddy Simulations (LES) at high Reynolds number. Indeed, as a part of the operations are done in an Eulerian way (i.e. on the VIC grid), all the existing subgrid scale (SGS) models used in classical Eulerian codes, including the recent "multiscale" models, can be easily implemented.
|
5 |
A new high-order method for direct numerical simulations of turbulent wall-bounded flowsLenaers, Peter January 2014 (has links)
A new method to perform direct numerical simulations of wall-bounded flows has been developed and implemented. The method uses high-order compact finite differences in wall-normal (for channel flow) or radial direction (for pipe flow) on a collocated grid, which gives high-accuracy results without the effectfof filtering caused by frequent interpolation as required on a staggered grid. The use of compact finite differences means that extreme clustering near the wall leading to small time steps in high-Reynolds number simulations is avoided. The influence matrix method is used to ensure a completely divergence-freesolution and all systems of equations are solved in banded form, which ensures an effcient solution procedure with low requirements for data storage. The method is unique in the sense that exactly divergence-free solutions on collocated meshes are calculated using arbitrary dffierence matrices. The code is validated for two flow cases, i.e. turbulent channel and turbulent pipe flow at relatively low Reynolds number. All tests show excellent agreement with analytical and existing results, confirming the accuracy and robustness ofthe method. The next step is to eciently parallelise the code so that high-Reynolds number simulations at high resolution can be performed. We furthermore investigated rare events occurring in the near-wall region of turbulent wall-bounded flows. We find that negative streamwise velocities and extreme wall-normal velocity uctuations are found rarely (on the order of 0:01%), and that they occur more frequently at higher Reynolds number. These events are caused by strong vortices lying further away from the wall and it appears that these events are universal for wall-bounded flows. / <p>QC 20150303</p>
|
6 |
Numerical simulations of massively separated turbulent flowsEl Khoury, George K. January 2010 (has links)
It is well known that most fluid flows observed in nature or encountered in engineering applications are turbulent and involve separation. Fluid flows in turbines, diffusers and channels with sudden expansions are among the widely observed areas where separation substantially alters the flow field and gives rise to complex flow dynamics. Such types of flows are referred to as internal flows since they are confined within solid surfaces and predominantly involve the generation or utilization of mechanical power. However, there is also a vast variety of engineering applications where the fluid flows past solid structures, such as the flow of air around an airplane or that of water around a submarine. These are called external flows and as in the former case the downstream evolution of the flow field is crucially influenced by separation. The present doctoral thesis addresses both internal and external separated flows by means of direct numerical simulations of the incompressible Navier-Stokes equations. For internal flows, the wall-driven flow in a onesided expansion channel and the pressure-driven flow in a plane channel with a single thin-plate obstruction have been studied in the fully developed turbulent state. Since such geometrical configurations involve spatially developing turbulent flows, proper inflow conditions are to be employed in order to provide a realistic fully turbulent flow at the input. For this purpose, a newly developed technique has been used in order to mimic an infinitely long channel section upstream of the expansion and the obstruction, respectively. With this approach, we are able to gather accurate mean flow and turbulence statistics throughout each flow domain and to explore in detail the instantaneous flow topology in the separated shear layers, recirculation regions as well as the recovery zones. For external flows, on the other hand, the flow past a prolate spheroid has been studied. Here, a wide range of Reynolds numbers is taken into consideration. Based on the characteristics of the vortical structures in the wake, the flow past a prolate spheroid is classified as laminar (steady or unsteady), transitional or turbulent. In each flow regime, the characteristic features of the flow are investigated by means of detailed frequency analysis, instantaneous vortex topology and three-dimensional flow visualizations.
|
7 |
A new two-scale model for large eddy simulation of wall-bounded flowsGungor, Ayse Gul 14 May 2009 (has links)
A new hybrid approach to model high Reynolds number wall-bounded turbulent flows is developed based on coupling the two-level simulation (TLS) approach in the inner region with conventional large eddy simulation (LES) away from the wall. This new approach is significantly different from previous near-wall approaches for LES. In this hybrid TLS-LES approach, a very fine small-scale (SS) mesh is embedded inside the coarse LES mesh in the near-wall region. The SS equations capture fine-scale temporal and spatial variations in all three cartesian directions for all three velocity components near the wall. The TLS-LES equations are derived based on defining a new scale separation operator. The TLS-LES equations in the transition region are obtained by blending the TLS large-scale and LES equations. A new incompressible parallel flow solver is developed that accurately and reliably predicts turbulent flows using TLS-LES. The solver uses a primitive variable formulation based on an artificial compressibility approach and a dual time stepping method. The advective terms are discretized using fourth-order energy conservative finite differences. The SS equations are also integrated in parallel, which reduces the overall cost of the TLS-LES approach. The TLS-LES approach is validated and investigated for canonical channel flows, channel flow with adverse pressure gradient and asymmetric plane diffuser flow. The results suggest that the TLS-LES approach yields very reasonable predictions of most of the crucial flow features in spite of using relatively coarse grids.
|
8 |
Turbulence Modelling Of Thick Axisymmetric Wall-Bounded Flows And Axisymmetric PlumeDewan, Anupam 03 1900 (has links) (PDF)
No description available.
|
9 |
Interscale transport of Reynolds stresses in wall-bounded flowsFerrante, Gioele, Morfin, Andres January 2019 (has links)
Couette, pipe, channel, and zero-pressure gradient (ZPG) turbulent boundary layer (TBL) flows have classically been considered as canonical wall-bounded turbulent flows since their near-wall behavior is generally considered to be universal, i.e. invariant of the flow case and the Reynolds number. Nevertheless, the idea that large-scale motions, being dominant in regions further away from the wall, might interact with and influence small-scale fluctuations close to the wall has not been disregarded. This view was mainly motivated due to the observed failure of collapse of the Reynolds normal stresses in viscous scaling. While this top-down influence has been studied extensively over the last decade, the idea of a bottom-up influence (backward energy transfer) is less examined. One exception was the recent experimental work on a Couette flow by Kawata, T. & Alfredsson, P. H. (Phys. Rev. Lett. 120, 244501, 2018). In the present work, a spectral representation of the Reynolds Stress transport equation is used to perform a scale-by-scale analysis of the terms in the equation. Two flow cases were studied: first, a Direct Numerical Simulation (DNS) of a Couette flow at a similar Reynolds number as Kawata and Alfredsson. The Reynolds number was ReT = 120, viscosity v. Second, a Large Eddy Simulation (LES) of a ZPG TBL at ReT = 730, 1270, and 2400. For both cases the classic interscale transport or turbulent kinetic energy was observed. However, also an inverse interscale transport of Reynolds shear stress was observed for both cases.
|
10 |
ON THE BUTTERFLY-LIKE EFFECT OF TURBULENT WALL-BOUNDED FLOWS TOWARDS SUSTAINABILITYVenkatesh Pulletikurthi (15630353) 19 May 2023 (has links)
<p>We study the effect of minute perturbations by using blowing jets at upstream and bio-inspired micro denticles on turbulence large-scale motions which are observed to be crucial in controlling heat transfer, noise and drag reduction. This work is divided into two phases. In first phase, we studied the effect of blowing perturbations at upstream on large-scale motions and associated co?herent vortical structures which are crucial in enhancing heat transfer by promoting mixing. The second phase is focused on impact of flow dynamics in preventing the biofouling using micro bioinspired structures and the importance of flow regime in designing the antifouling coating us?ing bioinspired structures is demonstrated, and subsequently, separation bubble dynamics and its characterization is carried out for a transonic channel imposed with pressure gradient to further expand our thesis outcomes to utilize micro bioinspired structures in aerospace applications, noise reduction, and to delay separation.</p>
<p><br></p>
<p>Extensive studies were focused on the importance of large-scale motions (LSM) and their con?tribution to TKE and turbulence mixing. Although there are studies focusing on the λ2 coherent vortical structures and large-scale motions separately, there are no studies addressing the control?ling using upstream perturbations on the large-scale motions and their associated λ2 vortices. In the first phase of our studies, we used the DNS data of channel flow for Reτ = 394 generated using in-house code. In these simulations, we created blowing perturbations using spanwise jets of low blowing ratio, 0.2, placed at upstream. The spatial large-scale motions are extracted using a a novel 3D adaptive Gaussian filtering technique developed based on Lee and Sung [1] for turbulent pipe flows. POD is used to extract the energetic large-scale motions and coherent vortical structures are extracted using λ2-criterion for its efficiency in educing coherent structures in cross flow jets. The results show that the upstream perturbations enhance streamwise heat flux via energetic LSM and also create a secondary peak of scalar production in the log-layer showing that the perturbations alter LSMs to enhance the heat transfer. Filtered large-scale field from Gaussian filtering technique have an integral length scale greater than 2h (where h is channel half-height) are used to obtain λ2 vortices. The resulted λ2 vortices are of ring-type and have higher signature of temperature than their counterpart. The pre-multiplied spectra shows that the upstream perturbations can excite the large-scale wave-numbers which are in the same order as the jet diameter and spacing between them. Simulations show the presence of secondary peak in the log-layer and increased turbulence production which are eminent of large-scales. Furthermore, our results suggest that jet spacing and diameter are crucial in exciting large-scale field to control turbulent flows.</p>
<p><br></p>
<p>Evans, Hamed, Gorumlu, et al. [2] modeled the denticles present on Mako shark skin into a diverging micro-pillars. They conducted experimental studies in a water tunnel using these on the back of airfoil exposed to an adverse pressure gradient flow. They observed that presence of these pillars reduced the re-circulation bubble (form drag) by 50%. They proposed a blowing and suction type mechanism by which the micro pillars interact with the boundary layer. However, the details of underlying interfacial mechanism is not completely understood. The unique impact of flow conditions on anti-biofouling and the corresponding mechanisms for the first time is illustrated. We employed commercially available bioinspired structures as micro-diverging pillars making it feasible to apply in real life. We demonstrated the underlying mechanism by which bio?inspired structures are responsible for anti-biofouling. To study the pressure gradient effects on the separation under transonic conditions, we performed direct numerical simulations (DNS) in a non?equilibrium flow created by a sinsuoidal contraction and also, we quantified the separation length,</p>
<p>detachment, and attachment points of separation bubble imposed with various pressure gradients and their variation in the transonic and subsonic regimes. We noticed that the resultant shear at the attachement led to the enhancement of coherent structures which are extended into the outer layer under transonic flow which is quite different than the subsonic flow.</p>
|
Page generated in 0.0766 seconds