No description available.

Orientador: Aparecido Augusto de Carvalho / Banca: Antônio de Pádua Lima Filho / Banca: Augusto Cesinando de Carvalho / Resumo: Neste trabalho descreve-se um sistema constituído por duas plataformas de forças e seus respectivos circuitos de condicionamento e interfaceamento de sinais, projetado para medir a distribuição de descarga de peso na região plantar de pacientes. Em cada plataforma de força foram acopladas 24 células de carga construídas com extensômetros. As características estáticas do sistema foram determinadas em laboratório utilizando pesos conhecidos. O sistema apresentou linearidade, com coeficiente de determinação de 0,9997, baixa histerese, precisão de 0,84% e resolução de 0,5 N. As medidas são apresentadas na tela de um computador facilitando a visualização para especialistas da área, principalmente médicos, fisioterapeutas e terapeutas ocupacionais. Utilizando o sistema foram medidas as distribuições de peso na região plantar de 87 indivíduos sem hemiplegia (sem histórico de queixas de dores ou problemas no sistema neuromusculoesquelético) e de 10 hemiplégicos crônicos, com mais de um ano de hemiplegia. Estes foram submetidos à avaliação utilizando a Escala de Equilíbrio de Berg. Entre os indivíduos se hemiplegia, estudou-se mais detalhadamente um grupo de 15 bailarinos e um de 12 ginastas rítmicas. Determinou-se a relação entre a distribuição de pesos nos antepés esquerdo e direito de indivíduos sem hemiplegia e hemiplégicos com o sistema implementado. Através do sistema constatou-se que a relação entre a distribuição de pesos no antepé esquerdo e direito dos indivíduos hemiplégicos é muito mais elevada que a dos indivíduos sem hemiplegia. Este resultado era de se esperar, uma vez que o hemiplégico descarrega seu peso predominantemente no lado não plégico / Abstract: This work describes a system consisting of two force platforms and their conditioning circuits and interfacing signals, designed to measure the distribution of weight load on the plantar region of patients. Each force platform was constructed with 24 load cells with strain gages. The static characteristics of the system were determined in laboratory using known weights. The system showed linearity with determination coefficient of 0.9997, low hysteresis, accuracy of 0.84% and resolution of 0.5 N. The measurements are presented in a computer screen in a friend way for specialists in the health field, mainly doctors, physiotherapists and occupational therapists. Using the system we measured the weight distributions in the plantar region of 87 normal patients (no history of complaints of pain or problems in the neuromuscular system) and 10 hemiplegic, with more than a year of hemiplegia. The latter were evaluated using the Berg Balance Scale. Among normal subjects, we studied a further group of 15 dancers and one of 12 rhythmic gymnasts. The relationship between the distribution of weights in the left and right forefeet of patients with normal and hemiplegic was determined with the implemented system. Through the system we found that the relationship between weight distribution on the left and right forefoot of hemiplegic patients is much higher than that of normal patients. This result was expected, since the hemiplegic unloads his weight predominantly in non-paralyzed side / Mestre

A distribuição de massa molar (DMM) e seus parâmetros são de fundamental importância na caracterização dos polímeros. Por este motivo, o desenvolvimento de técnicas que permitam a determinação da DMM de forma mais rápida e a menor custo é de grande importância prática. Os principais objetivos deste trabalho foram a implementação de alguns dos modelos baseados da teoria da reptação dupla propostos na literatura para descrever o mecanismo de relaxação das cadeias poliméricas, a avaliação dessas implementações e a análise de dois passos fundamentais na obtenção da DMM a partir de dados reológicos que são a metodologia de cálculo do espectro de relaxação baseado no modelo de Maxwell e a estratégia para a avaliação numérica das integrais que aparecem nos modelos de relaxação. Foi resolvido o problema denominado problema inverso, ou seja, a determinação da DMM a partir de dados reológicos usando um modelo de relaxação especificado e uma função de distribuição imposta. Foi usada a função Exponencial Generalizada (GEX) para representar a probabilidade de distribuição, sendo consideradas duas abordagens: i) cálculo explícito do espectro de relaxação e ii) aproximações paramétricas de Schwarzl, que evitam a necessidade do cálculo explícito do espectro de relaxação. A metodologia de determinação da DMM foi aplicada para amostras de polietileno e foram estimadas distribuições com boa representação dos dados experimentais do GPC, ao considerarem-se amostras com polidispersões inferiores a 10. Com relação a metodologia de cálculo do espectro de relaxação, foi realizado um estudo comparativo da aplicação de espectros de relaxação discreto e contínuo, com o objetivo de estabelecer critérios para especificação do número ótimo de modos de Maxwell a serem considerados. Ao efetuar-se a comparação entre as técnicas, verificou-se o espectro discreto apresenta como um sistema melhor condicionado, permitindo assim obter maior confiabilidade dos parâmetros estimados. Também é proposta uma modificação da metodologia de determinação da DMM, em que é aplicada a quadratura de Gauss-Hermite para a resolução numérica da integral dos modelos de relaxação. / The molecular weight distribution (MWD) and its parameters are of the fundamental importance in the characterization of polymers. Therefore, the development of techniques for faster and less time consuming determination of the MWD is of great practical relevance. The goals of this work were the implementation of some of the relaxation models from double reptation theory proposed in the literature, the evaluation of these implementations and the analysis of two key points in the recovery of the MWD from rheological data which are the methodology for calculation of the relaxation spectrum based on the Maxwell model and the numeric strategy for the evaluation of the integrals appearing in the relaxation models. The inverse problem, i.e., the determination of the MWD from rheological data using a specified relaxation model and an imposed distribution function, was solved. In the analysis of the inverse problem, the Generalized Exponential (GEX) was used as distribution function and two approaches were considered: i) explicit calculation of the relaxation spectrum and ii) use of the parametric method proposed by Schwarzl to avoid the explicit calculation of the relaxation spectrum. In the test of commercial samples of polyethylene with polidispersity less than 10, the application of this methodology led to MWD curves which provided good fit of the experimental SEC data. Regarding the methodology for calculation of the relaxation spectrum, a comparison between the performance of discrete and continuous relaxation spectrum was performed and some possible a criteria to determine the appropriate number of relaxation modes of Maxwell to be used were evaluated. It was found that the technique of discrete spectrum leads to better conditioned systems and, consequently, greater reliability of the estimated parameters. With relation to the numeric strategy for the evaluation of the integrals appearing in the relaxation models, the use of Gauss-Hermite quadrature using a new change of variables was proposed.

A distribuição de massa molar (DMM) e seus parâmetros são de fundamental importância na caracterização dos polímeros. Por este motivo, o desenvolvimento de técnicas que permitam a determinação da DMM de forma mais rápida e a menor custo é de grande importância prática. Os principais objetivos deste trabalho foram a implementação de alguns dos modelos baseados da teoria da reptação dupla propostos na literatura para descrever o mecanismo de relaxação das cadeias poliméricas, a avaliação dessas implementações e a análise de dois passos fundamentais na obtenção da DMM a partir de dados reológicos que são a metodologia de cálculo do espectro de relaxação baseado no modelo de Maxwell e a estratégia para a avaliação numérica das integrais que aparecem nos modelos de relaxação. Foi resolvido o problema denominado problema inverso, ou seja, a determinação da DMM a partir de dados reológicos usando um modelo de relaxação especificado e uma função de distribuição imposta. Foi usada a função Exponencial Generalizada (GEX) para representar a probabilidade de distribuição, sendo consideradas duas abordagens: i) cálculo explícito do espectro de relaxação e ii) aproximações paramétricas de Schwarzl, que evitam a necessidade do cálculo explícito do espectro de relaxação. A metodologia de determinação da DMM foi aplicada para amostras de polietileno e foram estimadas distribuições com boa representação dos dados experimentais do GPC, ao considerarem-se amostras com polidispersões inferiores a 10. Com relação a metodologia de cálculo do espectro de relaxação, foi realizado um estudo comparativo da aplicação de espectros de relaxação discreto e contínuo, com o objetivo de estabelecer critérios para especificação do número ótimo de modos de Maxwell a serem considerados. Ao efetuar-se a comparação entre as técnicas, verificou-se o espectro discreto apresenta como um sistema melhor condicionado, permitindo assim obter maior confiabilidade dos parâmetros estimados. Também é proposta uma modificação da metodologia de determinação da DMM, em que é aplicada a quadratura de Gauss-Hermite para a resolução numérica da integral dos modelos de relaxação. / The molecular weight distribution (MWD) and its parameters are of the fundamental importance in the characterization of polymers. Therefore, the development of techniques for faster and less time consuming determination of the MWD is of great practical relevance. The goals of this work were the implementation of some of the relaxation models from double reptation theory proposed in the literature, the evaluation of these implementations and the analysis of two key points in the recovery of the MWD from rheological data which are the methodology for calculation of the relaxation spectrum based on the Maxwell model and the numeric strategy for the evaluation of the integrals appearing in the relaxation models. The inverse problem, i.e., the determination of the MWD from rheological data using a specified relaxation model and an imposed distribution function, was solved. In the analysis of the inverse problem, the Generalized Exponential (GEX) was used as distribution function and two approaches were considered: i) explicit calculation of the relaxation spectrum and ii) use of the parametric method proposed by Schwarzl to avoid the explicit calculation of the relaxation spectrum. In the test of commercial samples of polyethylene with polidispersity less than 10, the application of this methodology led to MWD curves which provided good fit of the experimental SEC data. Regarding the methodology for calculation of the relaxation spectrum, a comparison between the performance of discrete and continuous relaxation spectrum was performed and some possible a criteria to determine the appropriate number of relaxation modes of Maxwell to be used were evaluated. It was found that the technique of discrete spectrum leads to better conditioned systems and, consequently, greater reliability of the estimated parameters. With relation to the numeric strategy for the evaluation of the integrals appearing in the relaxation models, the use of Gauss-Hermite quadrature using a new change of variables was proposed.

abstract: Asphalt binder is a complex viscoelastic hydrocarbon, whose performance depends upon interaction between its physical and chemical properties, both of which are equally important to the successful understanding of the material. Researchers have proposed various models linking linear viscoelastic (LVE) and microstructural parameters. However, none of these parameters provide insight into the relationship in the non- linear viscoelastic NLVE domain. The main goals of this dissertation are two fold. The first goal is to utilize the technique of Laser Desorption Mass Spectroscopy (LDMS) to relate the molecular structure of asphalt binders to its viscoelastic properties. The second goal of the study is to utilize different NLVE characterization tools and analysis procedures to get a clear understanding of the NLVE behavior of the asphalt binders. The goals of the study are divided into four objectives; 1) Performing the LDMS test on asphalt binder to develop at the molecular weight distributions for different asphalts, 2) Characterizing LVE properties of Arizona asphalt binders, 3) Development of relationship between molecular structure and linear viscoelasticity, 4) Understanding NLVE behavior of asphalt binders through three different characterization methods and analysis techniques. In this research effort, a promising physico-chemical relationship is developed between number average molecular weight and width of relaxation spectrum by utilizing the data from LVE characterization and the molecular weight distribution from LDMS. The relationship states that as the molecular weight of asphalt binders increase, they require more time to relax the developed stresses. Also, NLVE characterization was carried out at intermediate and high temperatures using three different tests, time sweep fatigue test, repeated stress/strain sweep test and Multiple Stress Creep and Recovery (MSCR) test. For the intermediate temperature fatigue tests, damage characterization was conducted by applying the S-VECD model and it was found that aged binders possess greater fatigue resistance than unaged binders. Using the high temperature LAOS tests, distortion was observed in the stress-strain relationships and the data was analyzed using a Fourier transform based tool called MITlaos, which deconvolves stress strain data into harmonic constituents and aids in identification of non-linearity by detecting higher order harmonics. Using the peak intensities observed at higher harmonic orders, non-linearity was quantified through a parameter termed as “Q”, which in future applications can be used to relate to asphalt chemical parameters. Finally, the last NLVE characterization carried out was the MSCR test, where the focus was on the scrutiny of the Jnrdiff parameter. It was found that Jnrdiff is not a capable parameter to represent the stress-sensitivity of asphalt binders. The developed alternative parameter Jnrslope does a better job of not only being a representative parameter of stress sensitivity but also for temperature sensitivity. / Dissertation/Thesis / Doctoral Dissertation Civil, Environmental and Sustainable Engineering 2018

A distribuição de massa molar (DMM) e seus parâmetros são de fundamental importância na caracterização dos polímeros. Por este motivo, o desenvolvimento de técnicas que permitam a determinação da DMM de forma mais rápida e a menor custo é de grande importância prática. Os principais objetivos deste trabalho foram a implementação de alguns dos modelos baseados da teoria da reptação dupla propostos na literatura para descrever o mecanismo de relaxação das cadeias poliméricas, a avaliação dessas implementações e a análise de dois passos fundamentais na obtenção da DMM a partir de dados reológicos que são a metodologia de cálculo do espectro de relaxação baseado no modelo de Maxwell e a estratégia para a avaliação numérica das integrais que aparecem nos modelos de relaxação. Foi resolvido o problema denominado problema inverso, ou seja, a determinação da DMM a partir de dados reológicos usando um modelo de relaxação especificado e uma função de distribuição imposta. Foi usada a função Exponencial Generalizada (GEX) para representar a probabilidade de distribuição, sendo consideradas duas abordagens: i) cálculo explícito do espectro de relaxação e ii) aproximações paramétricas de Schwarzl, que evitam a necessidade do cálculo explícito do espectro de relaxação. A metodologia de determinação da DMM foi aplicada para amostras de polietileno e foram estimadas distribuições com boa representação dos dados experimentais do GPC, ao considerarem-se amostras com polidispersões inferiores a 10. Com relação a metodologia de cálculo do espectro de relaxação, foi realizado um estudo comparativo da aplicação de espectros de relaxação discreto e contínuo, com o objetivo de estabelecer critérios para especificação do número ótimo de modos de Maxwell a serem considerados. Ao efetuar-se a comparação entre as técnicas, verificou-se o espectro discreto apresenta como um sistema melhor condicionado, permitindo assim obter maior confiabilidade dos parâmetros estimados. Também é proposta uma modificação da metodologia de determinação da DMM, em que é aplicada a quadratura de Gauss-Hermite para a resolução numérica da integral dos modelos de relaxação. / The molecular weight distribution (MWD) and its parameters are of the fundamental importance in the characterization of polymers. Therefore, the development of techniques for faster and less time consuming determination of the MWD is of great practical relevance. The goals of this work were the implementation of some of the relaxation models from double reptation theory proposed in the literature, the evaluation of these implementations and the analysis of two key points in the recovery of the MWD from rheological data which are the methodology for calculation of the relaxation spectrum based on the Maxwell model and the numeric strategy for the evaluation of the integrals appearing in the relaxation models. The inverse problem, i.e., the determination of the MWD from rheological data using a specified relaxation model and an imposed distribution function, was solved. In the analysis of the inverse problem, the Generalized Exponential (GEX) was used as distribution function and two approaches were considered: i) explicit calculation of the relaxation spectrum and ii) use of the parametric method proposed by Schwarzl to avoid the explicit calculation of the relaxation spectrum. In the test of commercial samples of polyethylene with polidispersity less than 10, the application of this methodology led to MWD curves which provided good fit of the experimental SEC data. Regarding the methodology for calculation of the relaxation spectrum, a comparison between the performance of discrete and continuous relaxation spectrum was performed and some possible a criteria to determine the appropriate number of relaxation modes of Maxwell to be used were evaluated. It was found that the technique of discrete spectrum leads to better conditioned systems and, consequently, greater reliability of the estimated parameters. With relation to the numeric strategy for the evaluation of the integrals appearing in the relaxation models, the use of Gauss-Hermite quadrature using a new change of variables was proposed.

京都大学 / 0048 / 新制・課程博士 / 博士(農学) / 甲第20449号 / 農博第2234号 / 新制||農||1050(附属図書館) / 学位論文||H29||N5070(農学部図書室) / 京都大学大学院農学研究科森林科学専攻 / (主査)教授 矢野 浩之, 教授 木村 恒久, 教授 髙野 俊幸 / 学位規則第4条第1項該当 / Doctor of Agricultural Science / Kyoto University / DFAM

No description available.

The purpose of this investigation was to determine the existence of bilateral strength and force-production asymmetry and evaluate possible differences based on sex, as well as strength level. Asymmetry was assessed during weight-distribution (WtD) testing, unloaded and lightly loaded static- (SJ) and countermovement-jump (CMJ) testing, and isometric midthigh-pull (IMTP) strength testing. Subjects included 63 athletes (31 male, 32 female) for WtD, SJ, and CMJ tests, while 129 athletes (64 male, 65 female) participated in IMTP testing. Independent-samples t tests were used to determine possible differences in asymmetry magnitude between males and females, as well as between strong and weak athletes. Cohen d effect-size (ES) estimates were also used to estimate difference magnitudes. Statistically different asymmetry levels with moderate to strong ESs were seen between males and females in WtD, 0-kg SJ (peak force [PF]), 20-kg SJ (peak power [PP]), 0-kg CMJ (PF, PP, net impulse), and 20-kg CMJ (PF), but no statistical differences were observed in IMTP variables. Dividing the sample into strong and weak groups produced statistically significant differences with strong ES estimates in IMTP PF and rate of force development, and many ESs in jump symmetry variables increased. The results of this investigation indicate that females may be more prone to producing forces asymmetrically than males during WtD and jumping tasks. Similarly, weaker athletes displayed more asymmetry than stronger athletes. This may indicate that absolute strength may play a larger role in influencing asymmetry magnitude than sex.

The modeling of the soft-output decoding of a binary linear block code using a Binary Phase Shift Keying (BPSK) modulation system (with reduced noise power) is the main focus of this work. With this model, it is possible to provide bit error performance approximations to help in the evaluation of the performance of binary linear block codes. As well, the model can be used in the design of communications systems which require knowledge of the characteristics of the channel, such as combined source-channel coding. Assuming an Additive White Gaussian Noise channel model, soft-output Log Likelihood Ratio (LLR) values are modeled to be Gaussian distributed. The bit error performance for a binary linear code over an AWGN channel can then be approximated using the Q-function that is used for BPSK systems. Simulation results are presented which show that the actual bit error performance of the code is very well approximated by the LLR approximation, especially for low signal-to-noise ratios (SNR). A new measure of the coding gain achievable through the use of a code is introduced by comparing the LLR variance to that of an equivalently scaled BPSK system. Furthermore, arguments are presented which show that the approximation requires fewer samples than conventional simulation methods to obtain the same confidence in the bit error probability value. This translates into fewer computations and therefore, less time is needed to obtain performance results. Other work was completed that uses a discrete Fourier Transform technique to calculate the weight distribution of a linear code. The weight distribution of a code is defined by the number of codewords which have a certain number of ones in the codewords. For codeword lengths of small to moderate size, this method is faster and provides an easily implementable and methodical approach over other methods. This technique has the added advantage over other techniques of being able to methodically calculate the number of codewords of a particular Hamming weight instead of calculating the entire weight distribution of the code.